NABEYA Vises

Search by sub-category

106

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

JIS Vise

NABEYA

For cast parts, the tough cast iron body, the movable body, and the female thread are designed to maintain sufficient strength with a hard material cast under the quality control of a JIS factory. Heading is used for the stopper balls on both ends of the handle to prevent them from falling out. Features rubber rings attached on both ends of the handle on the inside to prevent hands and fingers from getting caught.

Volume Discount

Starting from^∗ ：	649.63 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Ductile Vise

NABEYA

Made of ductile FCD600, even stronger than cast steel, and has a 35% larger mouth opening. The movable part and main unit are ductile FCD600 which will not be damaged. The high-strength socket S15CK has undergone carburizing and has been machined into a U-shape with 3 set screws to prevent excessive loosening due to impacts from above.

Volume Discount

Starting from^∗ ：	2,893.61 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lock-Tight CV Precision Machine Vise

NABEYA

The opening is nearly doubled compared with vises of the same class. Equipped with a pressure replenishment mechanism which does not disturb the operation when the pressure drops, enabling cutting fluid or fine chips in the body to be ejected from the blow hole using the chip blow mechanism. For the mechanical type, the handle can be operated even on the fixed clamp side. The LTCV-TH is a hydraulic internal type with a specification in which the handle is operated from the fixed clamp side.

Volume Discount

Starting from^∗ ：	1,955.33 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Lock-Tight Quick ONE Vise

NABEYA

The mechanical pressure increase mechanism can easily increase the pressure in 1 rotation, with minimal effect of changing temperature on the tightening force and no tool replacement, etc., required. Easy to set the tightening force by simply turning the adjustment dial by hand. Once the tightening force is set, the structure allows operation only at that tightening force. LTFH type is a vertical/horizontal machining center type that's used with angle plate adhered.

Volume Discount

Starting from^∗ ：	2,589.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Maker's Vise Wedge Locking Tool

NABEYA

[Features]
· The accuracy is higher than the former JIS 0 class.
· Tightening from the front is possible when mounted on a 1, 2 or 4-sided angle plate.
· Uses SCM440 material that is hardened to HRC50 or higher to retain precision for longer.
· Back surface has a guide block so precision can be easily improved

Volume Discount

Starting from^∗ ：	1,688.60 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Engineer's Vise Pin (for Spindle)

NABEYA

[Features]
A lead type vise · A sturdy heavy-duty lead type vise.
A pin (for spindle) part.
·Compatible vise: 75/100/125,150,127/200/250

Volume Discount

Starting from^∗ ：	10.19 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Lock-Tight Precision Machine Vise

NABEYA

The lifting prevention mechanism suppresses the lifting of movable parts or workpieces. Made of ductile cast iron to prevent bending and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched (HRC45). The accuracy is higher than the former JIS 0 class. Even if it wears off, it can be easily disassembled to correct accuracy. The parallel accuracy of the parallel specification is within 0.01.

Volume Discount

Starting from^∗ ：	1,145.55 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Jig Vise Jaw Plates

NABEYA

Optional parts for the machining vise series.

Volume Discount

Starting from^∗ ：	323.59 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Handle Joint for Lock-tight CV Precision Machine Vise

NABEYA

[Features]
A component for Lock-Tight CV Precision Machine Vises.
A handle joint.
· RoHS compliant
·Overall length: 200 mm / 250 mm / 300 mm / 350 mm / 400 mm
·Compatible models: Common to all CV models

Volume Discount

Starting from^∗ ：	72.19 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lock-tight 5-Axis Machine Vise

NABEYA

Raised structure that avoids the interference of the machine spindle: The length of the cutter can be shortened to reduce processing time and labor. Lock-tight lift prevention mechanism: A hemispherical segment is used to apply force on the movable part in a downward sloping direction at 45 degrees in order to prevent the workpiece from rising up. Socket replacement type: Three types of socket are included as standard and can be selected according to the machining conditions.

Volume Discount

Starting from^∗ ：	2,542.40 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lock-tight Double Clamp Vise

NABEYA

Double clamp type when shipped. Two workpieces can be quickly clamped at the same time even when they have different sizes. When tightened, the Lock-tight lift prevention mechanism restrains the workpiece from rising up. Can be made into a single clamp type as the standard accessories are reassembled, and the body is made of ductile cast iron that has been quenched on the sliding surface.

Volume Discount

Starting from^∗ ：	3,411.69 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lock-Tight Precision Machine Vise L Type

NABEYA

The opening is 45% bigger compared with vises of the same type (LT150M). Weight is 20% lighter than vises of the same size to make it easy to carry. The lifting prevention mechanism suppresses the uplift of a movable object or workpiece. It is made of ductile cast iron, preventing warping and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched.

Volume Discount

Starting from^∗ ：	1,293.02 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

FA Mouthpiece for Machine Vise

NABEYA

[Features]
A standard fitting for Machine Vise Series.
·Thread diameter: M8/M10/M12
·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

Volume Discount

Starting from^∗ ：	149.39 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Guide Block

Guide Block【2 Pieces Per Package】

NABEYA

S45C machine vise series guide block.

Volume Discount

Starting from^∗ ：	70.57 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Foot Jaw

NABEYA

Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.

Volume Discount

Starting from^∗ ：	460.44 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Pull Down Vise

Pull Down Vise【2 Pieces Per Package】

NABEYA

Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.

Volume Discount

Starting from^∗ ：	593.21 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat Jaw Plates for 5-Axis Machine Vise

NABEYA

[Features]
A flat jaw plate for Lock-Tight 5-Axis Machine Vises.
·Compatible vise: LT5AU-75 (F,FM)/LT5AU-75,100 (M)/LT5AU-100 (M)

Volume Discount

Starting from^∗ ：	129.00 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Joint Bar

NABEYA

[Features]
A Joint bar for Lock-Tight MC Jig Vises.
·Effective length: 0 mm / 150 mm

Volume Discount

Starting from^∗ ：	67.74 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

2 Piece Vise

NABEYA

[Features]
· Capable of easily clasping long objects that cannot be tightened with machine vises.
· Can clamp any work whatever the table (milling machine, sabre, boring machine, etc.) is.
· Convenient for processing of mass produced products.
· Large opening depth.

Volume Discount

Starting from^∗ ：	1,079.66 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Beta Vise

NABEYA

The movable part slides smoothly along the central groove. Designed to sufficiently withstand powerful tightening. FC250 is used for the main body and movable parts, preventing it from being damaged even when used for heavy-duty work. Planar processing on the bottom surface is particularly precisely finished, and does not tilt or deviate on the drill table.

Volume Discount

Starting from^∗ ：	130.55 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Lock-Tight MC Jig Vise

NABEYA

A jig vise for MS.FA with a lifting prevention mechanism that suppresses the uplift of a movable object or workpiece. It incorporates a patent-pending hydraulic mechanism and enables smooth operation. Cost cutting is also possible through use as a horizontal, upright, or MC vise. Can be used for an upright MC or milling machine with the same precision as a 2-face, 4-face, or angle rest, on a horizontal type MC.

Volume Discount

Starting from^∗ ：	9,101.83 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lock-Tight CV Precision Machine Vise Jaws

NABEYA

Standard clamp for machining vise.

Volume Discount

Starting from^∗ ：	177.64 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Work Stop

NABEYA

Optional parts for the machining vise series.

Volume Discount

Starting from^∗ ：	100.62 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Maker's Vise

NABEYA

[Features]
· Made of fully quenched materials, this is a precision tool that is finished by polishing.
· The accuracy is within 5 microns in both squareness and parallelism.
· Each machine comes with a beautiful wooden box case.

Volume Discount

Starting from^∗ ：	1,801.60 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Pull Down Vise Mouthpiece Coarse

Pull Down Vise Mouthpiece Coarse【2 Pieces Per Package】

NABEYA

Standard clamp (coarse) for pull-down vise (free jaw vise).

Volume Discount

Starting from^∗ ：	103.31 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Machine Vise Handle

NABEYA

Machine vise handle.
[Features]
· Machine vise replacement part.
· Optional part for the machine vise series.
[Application]
· Replacement handle for the machine vise.

Volume Discount

Starting from^∗ ：	81.09 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mold Vise

NABEYA

Ideal for machining mold plates. Features a large opening and fast-feed mechanism. The jaw opens 30% larger than conventional hydraulic vises to make the unit 30% more compact (in-house comparison). The main body and movable parts are made of ductile cast iron that does not get damaged, and the sliding surface features outstanding wear resistance thanks to the flame quenching. Provides overwhelmingly superior cost performance when compared with vises of the same size.

Volume Discount

Starting from^∗ ：	2,893.62 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lock-Tight Precision Machine Vise Jaws

NABEYA

Optional parts for the machining vise series.

Volume Discount

Starting from^∗ ：	149.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mounting Bolt Set

NABEYA

[Features]
A component of Machine Vise Series · A mounting bolt.
·Compatible vise: LT200M,LT250M,LT-HPD80E
·Compatible slot width: 22 mm
·Set contents: TNM2220 (T-slot nut), FNM0020 (flange nut), BM20100 (stud bolt)

Volume Discount

Starting from^∗ ：	83.55 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Thin Type Parallel Block

NABEYA

[Features]
· The height is designed with the jaw depth of the vise in mind.
· A thin type that's convenient for machining through holes close to the end face of a workpiece (especially the step type).
· A 2-piece set.

Volume Discount

Starting from^∗ ：	177.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

CV Vise Chip Cover

NABEYA

Lock-tight CV precise machine vise parts.

Volume Discount

Starting from^∗ ：	70.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

FA Step Mouthpiece for Machine Vise

NABEYA

[Features]
A step jaw plate for Machine Vise Series.
·Thread diameter: M8/M10/M12
·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

Volume Discount

Starting from^∗ ：	177.64 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

JIS Vise Collar

NABEYA

[Features]
A JIS vise collar for horizontal vise parts.
·Compatible vise: A75/A100/A125/A150

Volume Discount

Starting from^∗ ：	20.29 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

JIS Vise Mouthpiece (2 Pieces 1 Set)

NABEYA

[Features]
· JIS vise base (2-piece set) for side-vise parts

Volume Discount

Starting from^∗ ：	96.58 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Clamp Master Vise Guide Bar

NABEYA

[Features]
Guide bar parts for clamp master vise.
Compatible models are EVS, ETS, EPA, ETPA-75-3 (EVS75-GB), EVS, ETS, EPA, ETPA-100-4 (EVS100-GB), EVS, EPA-150-6 (EVS150-GB), EVS200-8 (EVS200-GB).

Volume Discount

Starting from^∗ ：	59.65 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Clamp Master Vise Knob (Black)

NABEYA

[Features]
Holding Ball part of clamp master vise (Black).
Compatible models are EVS200-8.

Volume Discount

Starting from^∗ ：	50.22 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Vise Mounting Bolt Set

Vise Mounting Bolt Set【3 Pieces Per Package】

NABEYA

Provided as a set for vise mounting. A set that includes 3 bolts, 3 flat washers, and 3 spring washers.

Volume Discount

Starting from^∗ ：	22.60 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Beta Vise Mouthpiece

NABEYA

Beta vise model A components for medium drilling machines.

Volume Discount

Starting from^∗ ：	48.05 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Hobby Vise (Bench Vise)

NABEYA

One unit does the work of three. (1) Vise (2) Pipe/Vise (3) Anvil

Volume Discount

Starting from^∗ ：	72.22 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Magnetic Clasp

NABEYA

[Features]
· Can be mounted on your current vise with the magnet.
· Can be used for any vise whether it is industrial or for do-it-yourself carpenters, machine vises, or work vises.

Volume Discount

Starting from^∗ ：	89.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Yankee Vise Spindle

NABEYA

Precision Small Boring Machine Vise Spindle

Volume Discount

Starting from^∗ ：	43.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Yankee Vise Rear Panel

NABEYA

Precision small boring machine vise rear plate.

Volume Discount

Starting from^∗ ：	36.07 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Woodwork Vise for School Teaching Material (Under Platform Type)

NABEYA

[Features]
· A tool type that can be mounted on the top surface of a workbench.
· The main body and movable parts are made of robust hard cast iron FC250.
· Trapezoidal screws are used for powerful tightening.
· Stopper balls are integrated casting, so they will not come off.
· All parts are interchangeable and replaceable.

Volume Discount

Starting from^∗ ：	186.51 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

CV Vise Chip Cover Unit

NABEYA

Lock-tight CV precise machine vise parts.

Volume Discount

Starting from^∗ ：	128.68 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

C Clamp

NABEYA

[Features]
· It is for light work in steel-plate pressing.
· Lower price with mass production.
· The handle is unichrome plated.

Volume Discount

Starting from^∗ ：	5.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：


Brand	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA
Product Series	JIS Vise	Ductile Vise	Lock-Tight CV Precision Machine Vise	Lock-Tight Quick ONE Vise	Maker's Vise Wedge Locking Tool	Engineer's Vise Pin (for Spindle)	Lock-Tight Precision Machine Vise	Jig Vise Jaw Plates	Handle Joint for Lock-tight CV Precision Machine Vise	Lock-tight 5-Axis Machine Vise	Lock-tight Double Clamp Vise	Lock-Tight Precision Machine Vise L Type	FA Mouthpiece for Machine Vise	Guide Block【2 Pieces Per Package】	Foot Jaw	Pull Down Vise【2 Pieces Per Package】	Flat Jaw Plates for 5-Axis Machine Vise	Joint Bar	2 Piece Vise	Beta Vise	Lock-Tight MC Jig Vise	Lock-Tight CV Precision Machine Vise Jaws	Work Stop	Tool Maker's Vise	Pull Down Vise Mouthpiece Coarse【2 Pieces Per Package】	Machine Vise Handle	Mold Vise	Lock-Tight Precision Machine Vise Jaws	Mounting Bolt Set	Thin Type Parallel Block	CV Vise Chip Cover	FA Step Mouthpiece for Machine Vise	JIS Vise Collar	JIS Vise Mouthpiece (2 Pieces 1 Set)	Clamp Master Vise Guide Bar	Clamp Master Vise Knob (Black)	Vise Mounting Bolt Set【3 Pieces Per Package】	Beta Vise Mouthpiece	Hobby Vise (Bench Vise)	Magnetic Clasp	Yankee Vise Spindle	Yankee Vise Rear Panel	Woodwork Vise for School Teaching Material (Under Platform Type)	CV Vise Chip Cover Unit	C Clamp
Starting from^∗	649.63 € *Unit price with basic configuration Volume Discount	2,893.61 € *Unit price with basic configuration Volume Discount	1,955.33 € *Unit price with basic configuration Volume Discount	2,589.32 € *Unit price with basic configuration Volume Discount	1,688.60 € *Unit price with basic configuration Volume Discount	10.19 € *Unit price with basic configuration Volume Discount	1,145.55 € *Unit price with basic configuration Volume Discount	323.59 € *Unit price with basic configuration Volume Discount	72.19 € *Unit price with basic configuration Volume Discount	2,542.40 € *Unit price with basic configuration Volume Discount	3,411.69 € *Unit price with basic configuration Volume Discount	1,293.02 € *Unit price with basic configuration Volume Discount	149.39 € *Unit price with basic configuration Volume Discount	70.57 € *Unit price with basic configuration Volume Discount	460.44 € *Unit price with basic configuration Volume Discount	593.21 € *Unit price with basic configuration Volume Discount	129.00 € *Unit price with basic configuration Volume Discount	67.74 € *Unit price with basic configuration Volume Discount	1,079.66 € *Unit price with basic configuration Volume Discount	130.55 € *Unit price with basic configuration Volume Discount	9,101.83 € *Unit price with basic configuration Volume Discount	177.64 € *Unit price with basic configuration Volume Discount	100.62 € *Unit price with basic configuration Volume Discount	1,801.60 € *Unit price with basic configuration Volume Discount	103.31 € *Unit price with basic configuration Volume Discount	81.09 € *Unit price with basic configuration Volume Discount	2,893.62 € *Unit price with basic configuration Volume Discount	149.39 € *Unit price with basic configuration Volume Discount	83.55 € *Unit price with basic configuration Volume Discount	177.95 € *Unit price with basic configuration Volume Discount	70.31 € *Unit price with basic configuration Volume Discount	177.64 € *Unit price with basic configuration Volume Discount	20.29 € *Unit price with basic configuration Volume Discount	96.58 € *Unit price with basic configuration Volume Discount	59.65 € *Unit price with basic configuration Volume Discount	50.22 € *Unit price with basic configuration Volume Discount	22.60 € *Unit price with basic configuration Volume Discount	48.05 € *Unit price with basic configuration Volume Discount	72.22 € *Unit price with basic configuration Volume Discount	89.71 € *Unit price with basic configuration Volume Discount	43.31 € *Unit price with basic configuration Volume Discount	36.07 € *Unit price with basic configuration Volume Discount	186.51 € *Unit price with basic configuration Volume Discount	128.68 € *Unit price with basic configuration Volume Discount	5.98 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	5 Days	8 Days	7 Days	7 Days	8 Days	9 Days	7 Days	8 Days	8 Days	8 Days	8 Days	7 Days	7 Days	5 Days	8 Days	5 Days	8 Days	8 Days	7 Days	5 Days	8 Days	7 Days	7 Days	8 Days	10 Days	5 Days	8 Days	5 Days	8 Days	5 Days	5 Days	7 Days	9 Days	5 Days	12 Days	12 Days	5 Days	7 Days	5 Days	6 Days	5 Days	8 Days	8 Days	5 Days	5 Days

Filter by:

Narrow search by specifying Brand

- MISUMI (6)
- Cost Efficient Products ()
- TRUSCO NAKAYAMA (139)
- ESCO (112)
- NABEYA (106)
- SUPER TOOL (28)
- AMF (27)
- BESSEY (22)
- NORELEM (18)
- GRIPONTOOLS (17)
- TAKAGI (15)
- ARC GREATTOOL (10)
- SMATO (9)
- JAPAN AUTOMATIC MACHINE (8)
- MURATEC-KDS (8)
- KTC(KYOTO TOOL) (8)
- SIGNET (7)
- GISUKE (6)
- KOPAL (6)
- LOBTEX (6)
- SAKAESEIKI (6)
- TRAD (6)
- E VALUE (5)
- SK 11 (5)
- GREENCROSS (4)
- GIGA SELECTION (4)
- HARP (4)
- MCC CORPORATION (4)
- BAKUMA (3)
- HOZAN (3)
- ARC (2)
- AS ONE (2)
- BESTTOOL (2)
- MITSUTOMO (2)
- NOGAJAPAN (2)
- WAKAJISHI (1)
- GANTER (1)
- GOSSEN METRAWATT (1)
- ELESA (1)
- ENGINEER (1)
- EARTH MAN (1)
- GERARDI (1)
- H & H (1)
- KITAGAWA IRON WORKS (1)
- KONDOTEC (1)
- LOCKJAW (1)
- M & M (1)
- NEW STRONG (1)
- RIKEN KEISOKUKI (1)
Clear