OMRON PLC (Input/Output Units)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Programmable Controller CP1L Expansion I / O Unit
OMRON
Programmable Controller CP1L Expansion I/O UnitStarting from∗ ： 359.07 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 318.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 628.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NX Series Digital Output Unit NX-OD Transistor Output Unit
OMRON
Digital output unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
■ Features
· Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
· Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
· Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time stamping input method,
and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
controller's control period
· The use of a removable terminal block improves system maintainability
· The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
greatly reduce the time required for wiring work
· A unit width of only 12 mm realizes space saving (connector type 30 mm)
· 2-, 4-, 8-, 16- and 32-output-contact types are available, enabling the I/O configuration that best suits your equipment
· Connect to the CJ Series using the EtherNet/IP couplerStarting from∗ ： 136.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX Series Incremental Encoder Input Unit NX-EC0□□□
OMRON
Enables more precise timing control by synchronizing the encoder data with the time data
■ Features
· Open-collector-output type and line-driver-output type incremental encoders can be connected
· High-speed remote I/O control with communications cycle as fast as 125 μs*1
· Free-run refreshing, synchronous I/O refreshing, or
task period prioritized refreshing*2 with the NX1P2 CPU Unit or EtherCAT Coupler Unit
· The MC Function Module of the NJ/NX/NY5 Controllers allows the encoder
to be used as a motion axis
· Latching (1 internal signal and 2 input signals from external devices)
· Pulse period measurement
· 32-bit counters (80000000 to 7FFFFFFF HEX)
· Maximum counting rate: 4 MHz (Line receiver: 4 MHz; Open collector: 500 kHz)
· Time stamping
· Maximum and minimum counter value setting
· Connect to the CJ PLC using the EtherNet/IP coupler
*1 When using the NX-EC01□□ together with the NX701-□□□□ and NX-ECC203.
*2 Task period prioritized refreshing is available when the NX-ECC203 is used together.Starting from∗ ： 575.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,511.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
![Screwless I/O Units [CJ1], Input Unit](//uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232730_001.jpg?$product_view_b$)
Screwless I/O Units [CJ1], Input Unit
OMRON
Omron’s CJ1 screwless I/O features at a glance:
• Drastically reduces wiring time
• Accepts a wide range of wiring gauges
• Easy to attach and detach; no tools required
• Easy to test signals, even while wiring is connected
• Construction prevents overstressing of clamping spring
• Interchangeable with existing CJ1 screw terminals
• Safe - no metal parts can be touched by fingersStarting from∗ ： 371.47 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
CJ-series 2-Channel SSI Input Unit
OMRON
Fully configurable SSI communication parameters per channelStarting from∗ ： 1,064.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 450.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,402.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 371.47 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 806.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 784.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 371.47 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 1,318.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 2,193.33 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 445.60 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NX Series Digital Output Unit NX-OC Relay Output Unit
OMRON
Digital output unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
■ Features
· Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
· Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
· Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time stamping input method,
and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
controller's control period
· The use of a removable terminal block improves system maintainability
· The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
greatly reduce the time required for wiring work
· A unit width of only 12 mm realizes space saving (connector type 30 mm)
· 2-, 4-, 8-, 16- and 32-output-contact types are available, enabling the I/O configuration that best suits your equipment
· Connect to the CJ Series using the EtherNet/IP couplerStarting from∗ ： 134.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX Series Digital Input Unit NX-ID DC Input Unit
OMRON
Digital input unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
■ Features
· Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
· Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
· Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time-stamping input method,
and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
controller's control period
· The use of a removable terminal block improves system maintainability
· The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
greatly reduce the time required for wiring work
· A unit width of only 12 mm realizes space saving (connector type 30 mm)
· 4-, 8-, 16- and 32-input-contact types are available, enabling the I/O configuration that best suits your equipment
· Connect to the CJ Series using the EtherNet/IP coupler- Volume Discount
Starting from∗ ： 163.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX Series Position Interface Pulse Output Unit NX-PG0□□□
OMRON
Positioning control with pulse outputs to command stepper motor drives and other pulse input motor drives
■ Features
· The MC Function Module of the NJ/NX/NY5 Controller allows you to
connect with as many axes as the NJ/NX/NY5 Controller can control
· High-speed remote I/O control with communications cycle as fast as 125 μs*1
· Multiple stepping motors and servo motors can be operated in synchronization by
using synchronous I/O refreshing or task period prioritized refreshing*2
· Latching (2 external latch inputs)
· Open collector pulse outputs up to 500 kHz
or line driver pulse outputs up to 4 MHz
· Line driver output models with 2 or 4 channels
*1 When using the NX-EC01□□ together with the NX701-□□□□ and NX-ECC203.
* *2 Task period prioritized refreshing is available when the NX-ECC203 is used together.Starting from∗ ： 463.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX Series Safety I / O Unit NX-SI / SO
OMRON
Adds a Safety CPU Unit and Safety I/O Unit to an EtherCAT coupler to enable unified safety control
■ Features
· EN ISO 13849-1 (PLe / Safety Category 4), IEC 61508 (SIL3) certified
· Incorporating the Safety over EtherCAT (FSoE)* protocol enables both standard control and safety control on the same EtherCAT
· There are 2 types of Safety Input Unit: a 4-point type and an 8-point type, and 2 types of Safety Output Unit, a 2-point type and a 4-point type
· Safety units can be freely combined and placed with standard units
*The open protocol Safety over EtherCAT (abbreviated as FSoE; "FailSafe over EtherCAT") defines a
safety-related communication layer for EtherCAT.
Complies with the requirements of IEC 61508 (SIL3), enabling communication of safety data and standard data on the same communication system without
communication speed or cycle time restrictions.- Volume Discount
Starting from∗ ： 205.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CP1W Expansion I/O Units
OMRON
Expansion I/O Units for E30/40/60, S30/40/60, or N30/40/60 CPU Units.Starting from∗ ： 359.07 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
![Smart DeviceNet I/O [DRT2]](//uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232673_001.jpg?$product_view_b$)
Smart DeviceNet I/O [DRT2]
OMRON
Smart DeviceNet I/O
Compact DeviceNet I/O units with extensive diagnostic functions. Data regarding power supply status, I/O response times, operation counters and on-time are continuously recorded and checked against user-defined limits. Any deviation is reported to the control system, as indication to perform machine maintenance and prevent unplanned downtime. Smart DeviceNet I/Os are supported by PLC Function Blocks and HMI Smart Active Parts, allowing program-less visualisation and monitoring from the CJ1 PLCs and NS operator terminals.
• Compact size IP20 housing
• Expandable digital I/Os
• Built-in diagnostics and preventive maintenance functions
• Detachable I/O terminal blocks
• Analog I/O with data pre-processing and alarm functionsStarting from∗ ： 663.07 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
![Digital I/O Slave Unit with Clamp Terminals [CRT1-□D16SL(-1)]](//uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232684_001.jpg?$product_view_b$)
Digital I/O Slave Unit with Clamp Terminals [CRT1-□D16SL(-1)]
OMRON
Screw-less Terminal Wiring Further Reduces Wiring Work and Saves Labor at the Production Site.
• Screw-less (M3) design reduces the need for extra tightening.
• Removable terminal block gives powerful support to maintenance work.
• One-step wiring. Wire simply by inserting the ferrules.
• Applicable wire: AWG24 to AWG16 (cross-section: 0.2 to 1.25 mm²Starting from∗ ： 837.33 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Digital Indicator for Omron SYSMAC CJ1/CJ2/NJ
OMRON
CE marking certification
•RoHS-compliant product
•Digital indicator allowing direct connection to the bus of OMRON SYSMAC CJ1/CJ2/NJ
•3000 times/sec high-speed processing
•Simultaneous hold function
The peak, bottom, and average values in the detection section can be held simultaneously.
•Completely seamless communication between CJ1/CJ2/NJ and F130.
•Remarkable simplification of equipment wiring.
•Reduce development duration of measurement system, modification, and maintenance.
•Cost advantages.
•Equivalent input calibration function
Calibration can be carried out by only inputting the sensor's rated output without using the actual load.Starting from∗ ： 2,798.67 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
PROFINET I/O Controller Unit for CJ1 CPU
OMRON
This module is designed for use with any CPU unit belonging to Omron’s highly successful CJ1 series of programmable logic controllers. It uses a separate communication processor to guarantee reliable, high-level performance independent of the PLC program or its CPU speed. As it is transparent to Omron’s own FINS communication protocol, the PROFINET IO controller also provides a communication channel so that legacy devices or existing software tools can be used to exchange data with the PLC CPU through the PROFINET controller.Starting from∗ ： 1,876.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
PROFINET I/O Controller Unit for CS1 CPU
OMRON
The PROFINET IO functionality of CS1W-PNT21 is identical to that of CJ1WPNT21.Starting from∗ ： 2,009.33 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
![Screwless I/O Units [CJ1], Output Unit](//uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232741_001.jpg?$product_view_b$)
Screwless I/O Units [CJ1], Output Unit
OMRON
Omron’s CJ1 screwless I/O features at a glance:
• Drastically reduces wiring time
• Accepts a wide range of wiring gauges
• Easy to attach and detach; no tools required
• Easy to test signals, even while wiring is connected
• Construction prevents overstressing of clamping spring
• Interchangeable with existing CJ1 screw terminals
• Safe - no metal parts can be touched by fingersStarting from∗ ： 392.40 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
SmartSlice I/O System, I/O Units
OMRON
The smartest modular I/O system
OMRON's SmartSlice I/O system is compact, intelligent and easy. When used with OMRON's CS1/CJ1 DeviceNet or CompoNet master units, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analog I/O units, PLC programming can be minimised. Preventive maintenance data collected by all I/O units can be accessed using CX-Integrator or NS-series Smart Active Parts.
• Most compact in the market (84 mm high)
• Easy set-up, backup and restore functions
• Diagnostics and preventive maintenance data at I/O level
• Detachable terminal blocks allow hot-swapping without re-wiring
• 3-wire I/O connection with 'push-in' technology, no screwdriver requiredStarting from∗ ： 132.69 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
![SSI Encoder Input Unit [CS1W-CTS21]](//uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232763_001.jpg?$product_view_b$)
SSI Encoder Input Unit [CS1W-CTS21]
OMRON
SSI (synchronous serial interface) is a standard communication protocol developed for absolute encoders. It provides easier connection and reduced wiring compared to parallel connection.Starting from∗ ： 2,100.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
CJ-series 4-Channel Counter Unit
OMRON
The new CJ1W-CTL41-E counter unit provides easy connection of up to 4 incremental encoders or high-speed pulse-train inputs to any CJ1 PLC system.
CJ1W-CTL41-E key features:
• 4 Encoder inputs
• 100 kHz pulse frequency
• 32-bit counter values
• Linear + circular mode
• 32 comparison values
• Interrupts to PLC CPU
• On-the-fly reconfiguration
• Easy wiringStarting from∗ ： 1,337.33 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
![Screwless I/O Units [CJ1], Input Unit](http://uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232730_001.jpg?$product_view_b$)
![Smart DeviceNet I/O [DRT2]](http://uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232673_001.jpg?$product_view_b$)
![Digital I/O Slave Unit with Clamp Terminals [CRT1-□D16SL(-1)]](http://uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232684_001.jpg?$product_view_b$)
![Screwless I/O Units [CJ1], Output Unit](http://uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232741_001.jpg?$product_view_b$)
![SSI Encoder Input Unit [CS1W-CTS21]](http://uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232763_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Number Of Inputs |
| Input Format |
| Rated Input Voltage(V) |
| Number of Outputs |
| Output Format |
| Rated load voltage(V) |
| Protection function |
| Connection Terminal |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON |
| Product Series | Digital I/O Slave Unit with Clamp Terminals [CRT1-□D16SL(-1)] | ||||||||||||||||||||||||||||||
| Starting from∗ | 359.07 € *Unit price with basic configuration | 318.67 € *Unit price with basic configuration | 628.00 € *Unit price with basic configuration | 136.54 € *Unit price with basic configuration | 575.70 € *Unit price with basic configuration | 1,511.00 € *Unit price with basic configuration | 371.47 € *Unit price with basic configuration | 1,064.00 € *Unit price with basic configuration | 450.54 € *Unit price with basic configuration Volume Discount | 1,402.67 € *Unit price with basic configuration | 371.47 € *Unit price with basic configuration | 806.67 € *Unit price with basic configuration | 784.67 € *Unit price with basic configuration | 371.47 € *Unit price with basic configuration | 1,318.00 € *Unit price with basic configuration | 2,193.33 € *Unit price with basic configuration | 445.60 € *Unit price with basic configuration | 134.87 € *Unit price with basic configuration | 163.21 € *Unit price with basic configuration | 463.67 € *Unit price with basic configuration | 205.08 € *Unit price with basic configuration | 359.07 € *Unit price with basic configuration | 663.07 € *Unit price with basic configuration | 837.33 € *Unit price with basic configuration | 2,798.67 € *Unit price with basic configuration | 1,876.00 € *Unit price with basic configuration | 2,009.33 € *Unit price with basic configuration | 392.40 € *Unit price with basic configuration | 132.69 € *Unit price with basic configuration | 2,100.00 € *Unit price with basic configuration | 1,337.33 € *Unit price with basic configuration |
| Min. Shipping Days ： | 7 Days | 7 Days | 7 Days | 6 Days | 6 Days | 3 Days | 3 Days | 3 Days | 6 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days |
| Number Of Inputs | 8 ～ 24 | 1 ～ 8 | 16 ～ 96 | - | - | - | 16 | - | 32 | - | 8 ～ 64 | 16 | 16 ～ 32 | - | - | - | 10 | - | 16 | 32 | - | - | 8 | - | - | - | - | - | 2 ～ 8 | - | - |
| Input Format | DC input | DC input | DC input / AC input / AC/DC input | - | Other | - | DC input | - | DC input | - | AC input | - | - | - | - | - | - | - | DC input | DC input / Other | - | - | DC input | - | - | - | - | - | DC input / AC input | - | - |
| Rated Input Voltage(V) | - | 12–24 | 24 ～ 200 to 240 | DC24 | - | - | - | - | 12–24 ～ 24 | - | 24 ～ 200 to 240 | 24 | 5 ～ 24 | - | - | - | - | - | 24 | 24 | - | - | - | - | - | - | - | - | - | - | - |
| Number of Outputs | 8 ～ 32 | 1 | 8 ～ 96 | 16 ～ 32 | - | - | - | - | 32 | - | - | - | 16 ～ 32 | 8 ～ 64 | - | - | 6 | - | - | - | - | 8 ～ 16 | 8 ～ 16 | 16 | - | - | - | 8 ～ 16 | 4 ～ 8 | - | - |
| Output Format | Relay contact output / Transistor / source output / Transistor / sync output | - | Relay contact output / Triac output / Transistor / source output / Transistor / sync output | Transistor / source output / Other | Other | - | - | - | Relay contact output / Transistor / sync output / Other | - | - | - | Transistor / source output / Transistor / sync output | Relay contact output / Triac output / Transistor / source output / Transistor / sync output | - | - | Transistor / sync output | Relay contact output | - | Other | Transistor / source output | Transistor / source output | Other | Other | - | - | - | Relay contact output / Transistor / source output / Transistor / sync output | Other | - | - |
| Rated load voltage(V) | - | 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Protection function | - | - | - | Other | - | - | - | - | - | - | - | - | - | Output protection function | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - |
| Connection Terminal | Terminal Block | Terminal Block / Connector | Terminal Block / Connector | Terminal Block | Terminal Block | - | - | - | Terminal Block | - | - | - | - | - | - | - | - | Terminal Block | Terminal Block / Connector | Terminal Block / Connector | Terminal Block | - | - | - | - | - | - | - | - | - | - |
| Representative Standard | CE / UL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / TUV / CSA | CE / UL / CUL / CSA | - | - | - | - | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / CSA | CE / UL / CUL / TUV | - | CE / Other | CE / Other | - | - | - | - | - | CE | - |
![Screwless I/O Units [CJ1], Input Unit](http://uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232730_001.jpg?$product_view_c$)
![Smart DeviceNet I/O [DRT2]](http://uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232673_001.jpg?$product_view_c$)
![Digital I/O Slave Unit with Clamp Terminals [CRT1-□D16SL(-1)]](http://uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232684_001.jpg?$product_view_c$)
![Screwless I/O Units [CJ1], Output Unit](http://uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232741_001.jpg?$product_view_c$)
![SSI Encoder Input Unit [CS1W-CTS21]](http://uk.misumi-ec.com/linked/material/el/OMR1/PHOTO/222304232763_001.jpg?$product_view_c$)
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Number Of Inputs
-
Input Format
-
Rated Input Voltage(V)
- 5
- 12–24
- 12 - 230 AC/DC
- 24
- DC24
- DC24V
- 100 to 120
- 200 to 240
-
Number of Outputs
-
Output Format
-
Rated load voltage(V)
-
Protection function
-
Connection Terminal
-
Representative Standard
Narrow search by specifying Brand
-
- SIEMENS (40)
- OMRON (31)
- IFM ELECTRONIC (26)
- PHOENIX CONTACT (26)
- EATON (18)
- WATANABE ELECTRIC INDUSTRY (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to PLC (Input/Output Units)
-
- PLC (CPU Units)
- PLC (Power Supply Units)
- PLC (Base Units)
- PLC (Software, Manuals)
- PLC Compatible Cables
- PLC Compatible Batteries
- PLC (Options, Others)
- PLC (Communication Units)
- PLC (Input/Output Units)
- PLC (Analog Units)
- PLC (Memory Units)
- PLC (Motion Controllers)
- PLC (Control Units)
- PLC (Wire-Saving Dedicated Units)
-
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.