OSG Square End Mills (Carbide)（Type：Square）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 63.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Flute Short (Anti-Vibration Type, Multifunction) UP-PHS
OSG
Multifunctional end mill that suppresses chattering vibrations, along with grooving and side machining with high efficiency.- Volume Discount
Starting from∗ ： 82.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
High Helix Short Type FX-MG-EHS
OSG
4-flute groove cutting has fantastic chip evacuation, and prevents burrs with its excellent sharpness. 3-flute strong against chatter vibrations is also available.- Volume Discount
Starting from∗ ： 86.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Stub Shape (Gut Mill) WX-G-EDSS
OSG
Powerful 2-flute end-mill with reinforced base blade corner section. Heavy cutting is possible because of the short blade length high rigidity. Achieves reduction in lead-time during mass production processes.- Volume Discount
Starting from∗ ： 35.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Miniature, Short, MG-EDS-3
OSG
Uses carbide alloy that increases in great intensity to Young's modulus.- Volume Discount
Starting from∗ ： 37.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, for Steel / Aluminum Alloy, Short, CA-ETS
OSG
Great cutting sharpness and wide flutes that removes swarf swiftly contribute to fast, efficient grooving and side surface machining.- Volume Discount
Starting from∗ ： 42.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated 4-Flute Short WXL-EMS
OSG
[Features]
· With its WXL hard lubricating coating, this end mill offers effective cutting performance on a wide range of materials, including general steel, quenched steel and copper alloys.
Recommended for both wet-type and dry-type milling.- Volume Discount
Starting from∗ ： 42.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Flute, Stub Shape (Heavy Duty Cutting Type) WX-PHSS
OSG
Short blade type high helix end mill with both chip discharge ability and cutting edge rigidity at high level. Enables high feed machining of a large incision, due to the high rigidity short blade length.Starting from∗ ： 59.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 120.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated 2-Flute 1.5D Flute Length Type WXL-1.5D-DE
OSG
[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.- Volume Discount
Starting from∗ ： 25.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
WXL-Coated 2-Flute 2D Flute Length Type WXL-2D-DE
OSG
[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.- Volume Discount
Starting from∗ ： 25.40 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
2-Flute 3D Type WXL-3D-DE
OSG
2-bladed end mill treated with the high hardness lubricating film WXL coat.ing Effective at grinding copper alloys in addition to steel. Recommended for both wet and dry machining.- Volume Discount
Starting from∗ ： 25.40 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
2-Flute 4D Type WXL-4D-DE
OSG
2-bladed end mill treated with the high hardness lubricating film WXL coat.ing Effective at grinding copper alloys in addition to steel. Recommended for both wet and dry machining.- Volume Discount
Starting from∗ ： 39.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Extra Long, FX-MG-EXDL
OSG
General-purpose 2-flute end-mill super long blade type with heat resistant FX coating.- Volume Discount
Starting from∗ ： 67.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 53.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 53.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Short, DIA-EDS
OSG
End mill, which was subjected to ultra-fine crystal diamond coating. Achieves outstanding tool life in high silicon aluminum alloy or graphite processing.Starting from∗ ： 92.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Short, DLC-EDS
OSG
End mill that has been subjected to its own ultra-smooth new DLC coating. Offers excellent performance with difficult to weld rolling aluminum alloy.- Volume Discount
Starting from∗ ： 46.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Short, FX-EDS-6
OSG
End Mill for high-speed machining that sufficiently exhibits the performance of high-speed, high-precision machining center.Starting from∗ ： 52.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Short, FX-MG-EDS
OSG
General-purpose 2-flute end-mill with heat resistant FX coating. Supports a wide range of machining.Starting from∗ ： 52.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 35.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Short, WX-EDS
OSG
General-purpose type of 2 blade end mill that uses a high toughness cemented carbide with excellent stability to the base material. Supports a wide range of work materials and achieves reliable machining.- Volume Discount
Starting from∗ ： 61.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Stub Shape, FX-MG-EDSS
OSG
Ultra-short blade with blade length 1.5 times the blade diameter, Ideal for high-speed machining with high-speed machining center.Starting from∗ ： 61.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 50.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Long FX-MG-EDL
OSG
General-purpose 2-flute end-mill long blade type with heat resistant FX coating.- Volume Discount
Starting from∗ ： 126.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 52.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute for Straight Blade MG-STDN
OSG
End mill designed to be used by molding to the required shape. Adopts high toughness cemented carbide.- Volume Discount
Starting from∗ ： 56.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, for Steel / Aluminum Alloy / Plus Check (HSK Compatible) CRN-HS-EDS
OSG
A minimum tool protrusion amount can be set with 2-plane binding HSK holder. Suitable for high-speed mass production of copper electrodes.- Volume Discount
Starting from∗ ： 61.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Miniature Short for Steel / Aluminum Alloy / Plus Check
OSG
Hightly lubricant CRN coating performs excellently on copper alloy, aluminum alloy, and plastic machining. Also perfectly suited for detail work on copper electrodes and copper alloy IT components.Starting from∗ ： 46.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Long for Steel / Aluminum Alloy / Plus Check, CRN-EDL-4
OSG
Hightly lubricant CRN coating performs excellently on copper alloy, aluminum alloy, and plastic machining. Produces a shiny, beautiful finished surface when used for copper electrode work.Starting from∗ ： 60.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, for Steel / Aluminum Alloy, Short, CA-RG-EDS
OSG
For copper, aluminum alloy. Well suited for finishing work on surfaces thanks to good cutting capabilities and a unique chatter preventing blade design.- Volume Discount
Starting from∗ ： 52.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, for Steel / Aluminum Alloy, Long, CA-RG-EDL
OSG
For copper, aluminum alloy. Well suited for finishing work on surfaces thanks to good cutting capabilities and a unique chatter preventing blade design.- Volume Discount
Starting from∗ ： 80.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, Short, DLC-ETS
OSG
Its own ultra-smooth new DLC coating prevents welding. Achieves high-speed high-efficiency machining in aircraft aluminum parts.Starting from∗ ： 56.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, for Slotting, Stub Shape, WX-SHTSS
OSG
End mill is set to allow for continuous groove machining without prior thrust machining, all with a single piece. Makes it possible to reduce the number of magazine tools.- Volume Discount
Starting from∗ ： 49.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Corresponding Standing Wall Type for 3-Blade Steel / Aluminum Alloy CA-MFE
OSG
Provides a wide variety of cutter paths, among high precision, high efficiency standing-wall machining, such as helical processing, contouring, ramping. Due to a long, slim shank, over-hang length is freely adjusted.- Volume Discount
Starting from∗ ： 89.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Flute, Extra Long, FX-MG-EXML
OSG
General-purpose 4-flute end-mill super long blade type with heat resistant FX coating.- Volume Discount
Starting from∗ ： 110.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 69.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Flute, for Graphite, Short, DG-EMS
OSG
Graphite Processing Carbide 3-Flute With Center Blade 30°Helix AngleStarting from∗ ： 133.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Flute, Short, FX-MG-EMS
OSG
General-purpose 4-flute end-mill with heat resistant FX coating. Supports high-speed, high feed machining.Starting from∗ ： 70.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 49.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Flute, Short, WX-EMS
OSG
General-purpose 4-flute end mill with high toughness cemented carbide as a base material. Supports a wide range of work materials and achieves reliable machining.Starting from∗ ： 22.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
WX Super Coat, Multi-Flutes, Short, WXS-EMS
OSG
High-rigidity type end mill that was subjected to a new development WX super coat of super-hard and ultra-heat-resistant. High-speed machining of general steel can be done for high-speed, high-precision machining of hardened steel.- Volume Discount
Starting from∗ ： 67.16 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
4-Flute, Stub Shape, FX-MG-EMSS
OSG
Ultra-short blade with blade length 1.5 times the blade diameter, Ideal for high-speed machining with high-speed machining center.Starting from∗ ： 70.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Flute, Stub (Gut Mill) WX-G-EMSS
OSG
Powerful 4-flute end-mill with reinforced base blade corner section. High-speed, high-feed is possible because of the high rigidity short blade length. Achieves reduction in lead-time during mass production processes.- Volume Discount
Starting from∗ ： 50.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Flute Slim Shank, Short, FX-SS-EMS
OSG
Shank diameters are 1 mm smaller than blade diameter. Can freely adjust the extension and length.- Volume Discount
Starting from∗ ： 228.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | 2-Flute, for Steel / Aluminum Alloy / Plus Check (HSK Compatible) CRN-HS-EDS | 2-Flute, Miniature Short for Steel / Aluminum Alloy / Plus Check | 2-Flute, Long for Steel / Aluminum Alloy / Plus Check, CRN-EDL-4 | Corresponding Standing Wall Type for 3-Blade Steel / Aluminum Alloy CA-MFE | |||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 63.81 € *Unit price with basic configuration | 82.30 € *Unit price with basic configuration Volume Discount | 86.80 € *Unit price with basic configuration Volume Discount | 35.20 € *Unit price with basic configuration Volume Discount | 37.42 € *Unit price with basic configuration Volume Discount | 42.71 € *Unit price with basic configuration Volume Discount | 42.20 € *Unit price with basic configuration Volume Discount | 59.09 € *Unit price with basic configuration | 120.89 € *Unit price with basic configuration | 25.40 € *Unit price with basic configuration Volume Discount | 25.40 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 25.40 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 39.70 € *Unit price with basic configuration Volume Discount | 67.46 € *Unit price with basic configuration Volume Discount | 53.18 € *Unit price with basic configuration | 53.18 € *Unit price with basic configuration | 92.08 € *Unit price with basic configuration | 46.58 € *Unit price with basic configuration Volume Discount | 52.27 € *Unit price with basic configuration | 52.27 € *Unit price with basic configuration | 35.95 € *Unit price with basic configuration Volume Discount | 61.55 € *Unit price with basic configuration Volume Discount | 61.38 € *Unit price with basic configuration | 50.87 € *Unit price with basic configuration | 126.10 € *Unit price with basic configuration Volume Discount | 52.41 € *Unit price with basic configuration Volume Discount | 56.20 € *Unit price with basic configuration Volume Discount | 61.87 € *Unit price with basic configuration Volume Discount | 46.68 € *Unit price with basic configuration | 60.65 € *Unit price with basic configuration | 52.70 € *Unit price with basic configuration Volume Discount | 80.20 € *Unit price with basic configuration Volume Discount | 56.43 € *Unit price with basic configuration | 49.08 € *Unit price with basic configuration Volume Discount | 89.06 € *Unit price with basic configuration Volume Discount | 110.30 € *Unit price with basic configuration Volume Discount | 69.96 € *Unit price with basic configuration Volume Discount | 133.25 € *Unit price with basic configuration | 70.14 € *Unit price with basic configuration | 49.75 € *Unit price with basic configuration Volume Discount | 22.40 € *Unit price with basic configuration | 67.16 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 70.14 € *Unit price with basic configuration | 50.50 € *Unit price with basic configuration Volume Discount | 228.90 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days |
| Blade diameter (D)(φ) | 3 ～ 12 | 3 ～ 12 | 3 | 1 ～ 12 | 0.1 ～ 3 | 3 ～ 20 | 1 ～ 30 | 2.5 ～ 20 | 6 ～ 10 | 0.1 ～ 12 | 0.1 ～ 30 | 0.1 ～ 20 | 0.2 ～ 12 | 3 ～ 30 | 3 ～ 12 | 3 ～ 12 | 0.5 ～ 12 | 0.5 ～ 12 | 0.2 ～ 2.5 | 0.2 ～ 30 | 1 ～ 25 | 9 ～ 12 | 3 ～ 16 | 3 ～ 12 | 6.5 ～ 30 | 3 ～ 25 | 1 ～ 12 | 1 ～ 12 | 0.5 ～ 3 | 1 ～ 3 | 1 ～ 20 | 3 ～ 12 | 3 ～ 20 | 3 ～ 12 | 8 ～ 22 | 3 ～ 30 | 3 ～ 12 | 4 ～ 12 | 2 ～ 30 | 2 ～ 25 | 2 ～ 2.5 | 4 ～ 8 | 3 ～ 16 | 3 ～ 12 | 8 ～ 12 |
| work material | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | - | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] | Aluminum[◎] / Copper[○] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Graphite[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] |
| Blade length (ℓ)(mm) | 20 ～ 90 | 8 ～ 26 | 8 | 1.5 ～ 18 | 0.2 ～ 8 | 8 ～ 38 | 2.5 ～ 45 | 3.8 ～ 30 | 18 ～ 30 | 0.15 ～ 18 | 0.2 ～ 60 | 0.3 ～ 60 | 0.8 ～ 48 | 20 ～ 112 | 5 ～ 16 | 5 ～ 16 | 1 ～ 26 | 1 ～ 24 | 0.3 ～ 3.7 | 0.4 ～ 45 | 2.5 ～ 45 | 19 ～ 26 | 4.5 ～ 24 | 10 ～ 34 | 24 ～ 67 | 12 ～ 67 | 3.5 ～ 30 | 1.5 ～ 18 | 1.5 ～ 8 | 4 ～ 15 | 2.5 ～ 38 | 12 ～ 40 | 8 ～ 38 | 4.5 ～ 18 | 12 ～ 33 | 20 ～ 112 | 20 ～ 90 | 8 ～ 24 | 6 ～ 45 | 6 ～ 45 | 6 ～ 8 | 11 ～ 19 | 4.5 ～ 24 | 4.5 ～ 18 | 20 ～ 30 |
| Number of flutes(sheet) | 2 | 4 | 3 | 2 | 2 | 3 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 4 | 4 ～ 6 | 4 | 4 | 4 |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Coating | Non-Coated | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | TiAlN | Dia Coat | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | Non-Coated | Dia Coat | DLC | TiAlN | TiAlN | Non-Coated | TiAlN | TiAlN | Non-Coated | TiAlN | Non-Coated | Non-Coated | CrN | CrN | CrN | Non-Coated | Non-Coated | DLC | TiAlN | Non-Coated | TiAlN | Non-Coated | DG | For General Steels (AlCrN, etc.) | Non-Coated | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN |
| Shank diameter (d)(mm) | 6 ～ 12 | 6 ～ 12 | 6 | 4 ～ 12 | 3 | 6 ～ 20 | 4 ～ 32 | 6 ～ 20 | 6 ～ 10 | 4 ～ 12 | 4 ～ 32 | 4 ～ 20 | 4 ～ 12 | 6 ～ 32 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 | 3 ～ 32 | 4 ～ 25 | 10 ～ 12 | 6 ～ 16 | 6 ～ 12 | 8 ～ 32 | 6 ～ 25 | 4 ～ 12 | 6 ～ 12 | 3 | 4 | 4 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 32 | 6 ～ 12 | 4 ～ 12 | 4 ～ 32 | 4 ～ 25 | 4 | 6 ～ 8 | 6 ～ 16 | 6 ～ 12 | 7 ～ 11 |
| Overall Length (L)(mm) | 60 ～ 150 | 60 ～ 100 | 50 | 40 ～ 75 | 40 | 50 ～ 105 | 40 ～ 125 | 60 ～ 125 | 68 ～ 80 | 45 ～ 75 | 45 ～ 140 | 45 ～ 130 | 45 ～ 100 | 60 ～ 225 | 45 ～ 75 | 45 ～ 75 | 40 ～ 75 | 40 ～ 75 | 50 | 40 ～ 125 | 40 ～ 120 | 70 ～ 75 | 50 ～ 100 | 50 ～ 90 | 70 ～ 145 | 50 ～ 140 | 45 ～ 80 | 50 ～ 80 | 40 | 45 ～ 50 | 40 ～ 105 | 50 ～ 90 | 50 ～ 105 | 50 ～ 75 | 110 ～ 200 | 60 ～ 225 | 60 ～ 150 | 80 ～ 120 | 40 ～ 125 | 40 ～ 120 | 40 | 60 ～ 70 | 50 ～ 100 | 50 ～ 75 | 100 ～ 110 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 5 | - | - | - | - | - | - | - | - | 2.5 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
| Blade tip shape | With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | With Lead | - | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge / With Lead | Sharp Edge | With Lead | Sharp Edge | With Lead | Sharp Edge |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | No torsion | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.96
- 3
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
- 3.96
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.78
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.52
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.49
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.8
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.8
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.8
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.8
- 47
- 47.2
- 47.5
- 47.6
- 47.8
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60.5
-
63
-
64
-
65
-
67
-
70～70.5
- 70
- 70.5
-
75
-
80
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
120
-
130
-
150
-
200
-
-
Number of flutes(sheet)
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Narrow search by specifying Brand
-
- MISUMI (75)
- NS TOOL (75)
- OSG (74)
- SANDVIK (47)
- NACHI(FUJIKOSHI) (40)
- GUHRING (38)
- DIJET (18)
- KYOCERA (16)
- OKAZAKI SEIKO (16)
- ASAHI TOOLS (13)
- KYOWA SEIKO (13)
- 7 LEADERS (11)
- THE CUT (9)
- EIKOSHA (6)
- TOYO DRILL (5)
- ATOM (5)
- SANKO MFG (4)
- GCT (2)
- SPEED TIGER (2)
- UNION TOOL (2)
- PROCHI (1)
- TAIYO-TOOL (1)
- VAN_HOORN (1)
- WIDIN (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Square End Mills (Carbide)
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.