SANDVIK Holding Tools for I.D. Tuning（Clearance angle：11°）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
CoroTurn 111, Boring Tool Bit for Turning
SANDVIK
[Features]
·Inner diameter boring tool bit with low cutting force
·The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions
·Easy-fix sleeve for quick and accurate core height adjustment
[Applications]
·For inner diameter turning operationsStarting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L-ER
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 454.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Starting from∗ ： 803.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR / L-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 191.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR / L-R
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Starting from∗ ： 806.06 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111 Screw Clamp, A/E-SWLPR/LR
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...SWLPR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
T-Max S Boring Tool Bit For Turning S..CTFPR / L
SANDVIK
A boring tool bit for turning that achieves high productivity, high quality, and high efficiencyStarting from∗ ： 199.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 304.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 775.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid-Carbide Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SCLPR / L
SANDVIK
CoroTurn 111 carbide boring tool bit for inner diameter machining with long runout and unstable machining conditionsStarting from∗ ： 362.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Tip Shape |
| Minimum Machining Diameter |
| Application |
| Cutting Direction |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank diameter |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L-ER | Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SDUPR / L-ER | Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER | Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR / L-R | Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR / L-R | Boring Tool Bit, CoroTurn 111, Screw Clamp, Carbide Bit, E...-STFPR / L | Boring Tool Bit, CoroTurn 111, Screw Clamp, E.-SDUPR / L-ERX | Solid-Carbide Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SCLPR / L | ||||||
| Starting from∗ | 200.41 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 454.73 € *Unit price with basic configuration | 803.22 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 191.85 € *Unit price with basic configuration | 806.06 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 199.20 € *Unit price with basic configuration | 304.25 € *Unit price with basic configuration | 775.06 € *Unit price with basic configuration | 362.20 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Applicable Tip Shape | C (80° Diamond-Shape) / T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | W (Hexagonal Type) | W (Hexagonal Type) | T (Triangle) | T (Triangle) | D (55° Diamond-Shape) | C (80° Diamond-Shape) |
| Minimum Machining Diameter | 10 ～ 32 | 18 ～ 20 | 15 ～ 20 | 15 ～ 18 | 15 ～ 32 | 22 | 8.5 ～ 20 | 13 ～ 16 | 6.5 ～ 16 | 8.5 ～ 12 | 20 ～ 32 | 8.5 ～ 20 | 22 | 10 ～ 16 |
| Application | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter |
| Cutting Direction | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand |
| Clamp Shape | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Clamp-on | Screw-on | Screw-on | Screw-on |
| Overall Length L1 | 125 ～ 300 | 150 ～ 200 | 150 ～ 200 | 150 ～ 180 | 125 ～ 300 | 204.6 | 80 ～ 200 | 150 ～ 180 | 80 ～ 180 | 80 ～ 125 | 200 ～ 300 | 100 ～ 200 | 200 | 125 ～ 180 |
| Clearance angle | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 11° | 11° |
| Shank diameter | 8 ～ 25 | 12 ～ 16 | 10 ～ 16 | 10 ～ 12 | 10 ～ 25 | 16 | 6 ～ 16 | 10 ～ 12 | 5 ～ 12 | 6 ～ 10 | 16 ～ 25 | 6 ～ 16 | 16 | 8 ～ 12 |
| Protrusion length (L/D) | 12～32 ～ 37.5～100 | 18～48 ～ 24～64 | 60 ～ 96 | 60–100 ～ 120 | 15–40 ～ 37.5～100 | 24～64 | 9 to 24 ～ 32 | 100 ～ 120 | 7.5～20 ～ 72 | 9 to 24 ～ 15–40 | 32.5～64 ～ 49～100 | 36 ～ 96 | 96 | 48 ～ 72 |
| Lubrication Hole Y/N | Available | Available | Available | N/A | Available | Available | Available | N/A | Available | Available | N/A | Available | Available | Available |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Tip Shape
-
Minimum Machining Diameter
- 0.3
- 0.5
- 0.6
- 0.9
- 1
- 1.5
- 1.95
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 4.5
- 5
- 5.0 mm
- 5.2
- 5.5
- 6
- 6.0 mm
- 6.2
- 6.5
- 6.604
- 7
- 7.2
- 7.5
- 8
- 8.0 mm
- 8.2042
- 8.5
- 8.6868
- 9
- 10
- 10.0 mm
- 10.2108
- 10.4902
- 11
- 12
- 12.0 mm
- 12.192
- 12.7
- 13
- 14
- 14.0 mm
- 15
- 15.1892
- 16
- 16.3068
- 17
- 17.2974
- 18
- 18.0 mm
- 18.4912
- 18.9992
- 19
- 19.6088
- 19.9898
- 20
- 20/30
- 20.1
- 20.62
- 21
- 21.59
- 22
- 23
- 23.5966
- 24.892
- 24.9
- 24.99
- 24.9936
- 24.994
- 25
- ø25
- 25/37
- 25.4
- 25.7048
- 26
- 26.01
- 26.6954
- 27
- 28
- 29
- 30
- 30.505
- 30.5054
- 31
- 31.496
- 31.5
- 31.801
- 32
- ø32
- 32.004
- 32.512
- 32.9946
- 32.995
- 33
- 33 mm
- 34
- 35
- 35.45
- 36.45
- 37
- 37.287
- 37.2872
- 37.313
- 37.45
- 38
- 38.1
- 38.45
- 38.913
- 39.45
- 40
- 40/55
- 40.005
- 40.01
- 40.1
- 40.1066
- 40.132
- 40.45
- 41
- 41.45
- 41.5
- 42.45
- 43
- 43.307
- 43.45
- 44
- ø44
- 44.45
- 44.704
- 45
- 45.0088
- 45.45
- 46
- 46.45
- 46.99
- 47
- 47.45
- 48
- 48.45
- 49.3014
- 49.45
- 50
- 50 mm
- 50/75
- 50.01
- 50.0126
- 50.038
- 50.45
- 50.8
- 51
- 51.45
- 52
- 52.45
- 53
- 53.45
- 54
- 54.0004
- 54.45
- 54.99
- 55
- 55.35
- 56
- 56.35
- 57
- 57.35
- 58.35
- 59.35
- 59.99
- 60
- 60/75
- 60.35
- 61.01
- 61.011
- 61.35
- 62
- ø62
- 62.35
- 62.992
- 63
- 63.35
- 63.5
- 63.98
- 64
- 64.35
- 64.7954
- 65
- 65.35
- 66.35
- 67.35
- 67.894
- 68
- 68.35
- 69
- 69.35
- 70
- 70/90
- 70.35
- 71.35
- 72
- 72.35
- 73.35
- 74.35
- 75
- 75.01
- 75.35
- 76.35
- 77.013
- 77.35
- 78.35
- 79.35
- 80
- 80.01
- 80.35
- 81.35
- 82.35
- 82.499
- 83
- 83.35
- 84.35
- 85
- 85.35
- 86
- 86.35
- 87.35
- ø88
- 88.35
- 89
- 89.35
- 90
- 90.35
- 98
- 99
- 99.9998
- 100
- 105
- 106
- 109
- 111.35
- 115
- 119.9896
- 120
- 123
- ø125
- 130
- 132.35
- 135
- 136
- 139.7
- 140
- 145
- 148
- 150
- 153.35
- 166
- 170
- 172.72
- 188
- 198
- 212
- 220
- 223.52
- 228
- 248
- 250
- 258
- 275
- 279.4
- 298
- 378
- 458
- 538
- 778
- 1018
-
Application
- Internal Diameter
- Inner diameter profiling
- Pull
-
Cutting Direction
- Right-hand
- Left-hand
- IKOU
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Lever lock
- Wedge Lock
- Other
-
Overall Length L1
-
Clearance angle
- 5°
- 7°
- 20°
- 0°
- 11°
-
Shank diameter
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Narrow search by specifying Brand
-
- SANDVIK (14)
- KYOCERA (9)
- SHOWA TOOL (0)
- MANYO TOOLS (0)
- NGK SPARK PLUG (0)
- THE CUT (0)
- BIG KAISER (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for I.D. Tuning
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.