SANKYO DIAMOND INDUSTRIAL Diamond Cutters（Hole Diameter：M10）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Small Cutter With Shaft For Tile Cutting
SANKYO DIAMOND INDUSTRIAL
[Features]
· A small-diameter cutter for minimal damage to the tile when cutting. Has an outstanding turning circle for small turns.
[Applications]
· For cutting tile seams.
[SMAT-H compatible models]
· HITACHI KOKI: 100 mm disk grinders, all models
· RYOBI: G Series / RG Series
[SMAT-M compatible models]
· MAKITA: 9533 Series / GA403 Series
· BOSCH: GWS Series / PWS Series- Volume Discount
Starting from∗ ： 77.44 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Dry Shaper (for Building Materials)
SANKYO DIAMOND INDUSTRIAL
Grinding of concrete, brick, block and stone. Biting into stones and concrete is prevented with resin embedding. Ideal for finishing and flat grinding.- Volume Discount
Starting from∗ ： 130.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Dry Saver (for Stone)
SANKYO DIAMOND INDUSTRIAL
Grinding concrete, bricks, blocks, and stone materials. The embedded resin suppresses any biting into concrete or stone materials. Ideal for finishing and flat grinding.- Volume Discount
Starting from∗ ： 200.65 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Dry Surfacer Ace
SANKYO DIAMOND INDUSTRIAL
Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
[Features]
· Workability is improved with surfacer sharpness intact.
· Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
· Lighter main unit: Main unit is lightweight while still maintaining substrate strength. Weight reduced by 13%.
· Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.- Volume Discount
Starting from∗ ： 128.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Dry Surfacer Ace DX
SANKYO DIAMOND INDUSTRIAL
Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
[Features]
· It has an improved lifetime.
· Grinding of granite also has distinctively sharp performance.
· Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
· Lighter main unit: Main unit has been made lighter while still maintaining substrate strength. Weight reduced by 13%.
· Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.- Volume Discount
Starting from∗ ： 125.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Dry Surfacer Ace Light
SANKYO DIAMOND INDUSTRIAL
Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
[Features]
· Suitable for minor work. Affordable pricing.
· Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
· Lighter main unit: Main unit has been made lighter while still maintaining substrate strength. Weight reduced by 13%.
· Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.- Volume Discount
Starting from∗ ： 81.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Craftsmanship RIM (Flange)
SANKYO DIAMOND INDUSTRIAL
For cutting concrete and blocks. Ideal for cutting edges. You can cut even right-angle sections nice and straight without interference from the locknut.- Volume Discount
Starting from∗ ： 109.31 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
PVC Cut Ace (Screwing)
SANKYO DIAMOND INDUSTRIAL
Cutting PVC pipes. PVC pipe cutting + With a screw flange for which direct mounting to Disk grinder is possible- Volume Discount
Starting from∗ ： 64.86 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Renovating Tool Line Cut U
SANKYO DIAMOND INDUSTRIAL
[Features]
· A screw-in type that is easily mountable to disk grinders and which ensures minimal line deviations when cutting.
· The caulking material adhesive area is large for more reliable renovations.
[Applications]
· For repairing concrete, mortar and cracks and for cutting grooves for injecting caulking material.- Volume Discount
Starting from∗ ： 130.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Renovating Tool Line Cut V
SANKYO DIAMOND INDUSTRIAL
[Features]
· A screw-in type that is easily mountable to disk grinders and which ensures minimal line deviations when cutting.
· The tip is V-shaped, giving it excellent cutting performance in cracks and improving working efficiency.
[Applications]
· For repairing concrete, mortar and cracks and for cutting grooves for injecting caulking material.- Volume Discount
Starting from∗ ： 130.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Goketsu With Flange
SANKYO DIAMOND INDUSTRIAL
[Features]
· Diagonal slit: Discharges cutting chips to prevent heat build-up and to maintain sharpness.
· Short tip: Provides a heat dissipating effect and reduces the amount which the substrate shakes.
· Diamond layer: The deeper slit grooves improve cutting chip discharge and sharpness.
· Rounded edge: The tip edges are rounded to prevent chipping and to improve safety.
[Applications]
· For cutting reinforced (10-mm rebar) concrete, granite and blocks- Volume Discount
Starting from∗ ： 123.19 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
| Wheel Type |
| Specifications |
| Application |
| Outer Diameter(mm) |
| Blade thickness(mm) |
| Hole Diameter(mm) |
| Tip Height(mm) |
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL |
| Product Series | |||||||||||
| Starting from∗ | 77.44 € *Unit price with basic configuration Volume Discount | 130.95 € *Unit price with basic configuration Volume Discount | 200.65 € *Unit price with basic configuration Volume Discount | 128.06 € *Unit price with basic configuration Volume Discount | 125.80 € *Unit price with basic configuration Volume Discount | 81.26 € *Unit price with basic configuration Volume Discount | 109.31 € *Unit price with basic configuration Volume Discount | 64.86 € *Unit price with basic configuration Volume Discount | 130.55 € *Unit price with basic configuration Volume Discount | 130.55 € *Unit price with basic configuration Volume Discount | 123.19 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 7 Days | 6 Days | 11 Days | 6 Days | 6 Days | 6 Days | 8 Days | 9 Days | 6 Days | 6 Days | 9 Days |
| Product Type | - | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Polyvinyl chloride tube internal surface cutter | - | - | Diamond cutter |
| Wheel Type | Rim Type | - | - | - | - | - | - | - | Rim Type | Rim Type | Segment Type |
| Specifications | - | - | - | - | - | - | - | - | - | - | Dry Type |
| Application | Tile | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Tile | For concrete, mortar / Tile | For concrete, mortar / Tile | For concrete, mortar | Non-ferrous | For concrete, mortar | For concrete, mortar | For concrete, mortar / Stone Material |
| Outer Diameter(mm) | 54 | 100 | 100 | 100 | 100 | 100 | 125 | 100 | 90 | 90 | 125 |
| Blade thickness(mm) | 1.2 | 6 | 6 | 6 | 6 | 6 | 2 | 0.8 | 10 | 10 | 1.9 |
| Hole Diameter(mm) | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 | M10 |
| Tip Height(mm) | 4 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 6 | 15 | - | - | 8 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Type
- Diamond cutter
- Polyvinyl chloride tube internal surface cutter
-
Wheel Type
- Segment Type
- Wave Type
- Rim Type
-
Specifications
- Dry Type
- Wet type
- Dry and Dry-Wet Type
-
Application
- Iron
- Non-ferrous
- For concrete, mortar
- Stone Material
- Tile
- Resin
-
Outer Diameter(mm)
-
Blade thickness(mm)
-
Hole Diameter(mm)
-
Tip Height(mm)
Narrow search by specifying Brand
-
- SANKYO DIAMOND INDUSTRIAL (11)
- TAKEKAWA (1)
- NORITAKE (0)
- ARC GREATTOOL (0)
- DREMEL (0)
- WAKITA (0)
- TRUSCO NAKAYAMA (0)
- EARTH MAN (0)
- GOEI (0)
- MOTOYUKI (0)
- SAINT-GOBAIN (0)
- TSUBOMAN (0)
- IWOOD (0)
- ASAHI DIAMOND INDUSTRIAL (0)
- RESITON (0)
- LOBTEX (0)
- RIKEN DIAMOND INDUSTRY (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Diamond Cutters
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.