SHINOHARA ELECTRIC Louvers

?* Information on days to ship and prices

• 

  In-Wing Ventilation Gallery (Anti-Water Jet Type), IP45

  SHINOHARA ELECTRIC

  Use for ventilating operation boards, control panels, and cubicles. Large opening size.
  
  [Features]
  · Can secure an opening area of 148 cm2 using outdoor specifications for attaching blow prevention covers.
  · Significant labor savings are possible because, just as in the past, there is no need to put a vent in the panel.
  · Also, a breathing hole can easily be added.
  · Combines the rear gallery with anti-blow-in cover for strong waterproofing that can pass JISC4620/JISC0920 (anti-water jet) testing (IP45).
  · Stainless steel type also available (built to order)

  2D CAD data available

  Starting from∗ ：	167.45 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Small Ventilation Gallery (Indoor)

  SHINOHARA ELECTRIC

  Used for ventilation of indoor control panels, panel boards, etc.
  
  [Features]
  · Can be installed directly on panels as before, with no hole drilling required.
  · Ventilation galleries can be installed afterward, reducing workload.
  · A 120mm square fan can also be installed (SG1-10-4)

  2D CAD data available

  Starting from∗ ：	28.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Thin Type Water-Jet-Proof Louver, IP45

  SHINOHARA ELECTRIC

  This product's panel has been made smaller to enable more efficient use of space. Despite being so compact it still boasts excellent waterproofing properties.
  Use this product as a ventilation louver for objects such as switchboards or outdoor cubicles subjected to harsh wind and rain conditions.
  
  [Features]
  · This product achieves greatly reduced depth while still maintaining the same protection grade (IP45) as previous products in the series. Designed with a smaller form-factor for more efficient use of space.
  The inner parts shield the filter surface from exposure to wind and rain, ensuring that water films formed from rainwater do not affect ventilation.
  Filter maintenance can be performed from the front.
  A 120 mm square fan can be fitted to the rear face of the GTS-12W.
  [Product Range]
  Available with or without a fan.
  　Model Number: GTS-12W -> Without fan
  Model Number: GTS-12W-F1 -> With 1 × 100 VAC fan (made by Sanyo Denki -109S005)
  Model Number: GTS-12W-F2 -> With 1 × 120 VAC fan (made by Sanyo Denki - 109S008)

  Starting from∗ ：	186.75 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Free Aluminum Gallery (FAG Type) 1P × 2

  SHINOHARA ELECTRIC

  This aluminum ventilation gallery is designed to enable ventilation of cubicles, switchboards, etc.
  
  [Features]
  - Extra-long galleries can be produced to the customer's specifications.
  - It is not necessary to directly drill conventional ventilation holes into the panel.
  - This free aluminum gallery can be mounted from the rear as a separate component.
  - Ventilation efficiency is high without sacrificing opacity.
  - Light with no risk of rusting.

  Starting from∗ ：	120.35 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Gallery with Hood (for outdoor use: FG type), IPX4

  SHINOHARA ELECTRIC

  The hood helps it deal with wind and rain.
  
  [Features]
  - The hood mounted to the gallery provides wind and rain protection.
  - Simple installation.
  - Mount by snapping into the panel holes and screwing in the retention frame (retention board) from the underside.
  - Accessories like a blow prevention cover, insect screen and anti-dust filter provide the features needed for your applications.
  - (FG-15, FG-20 only.)
  - Can be included in a set with a salt filter.

  2D CAD data available

  Starting from∗ ：	114.96 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ventilation Gallery (Anti-Salt Damage Specification) IP4X

  SHINOHARA ELECTRIC

  Use as a ventilation component of a switchboard installed in IP4X coastal areas, etc.

  2D CAD data available

  Starting from∗ ：	519.32 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Jet-Flow Proof Ventilation Gallery (for dealing with salt damage) IP55

  SHINOHARA ELECTRIC

  A ventilation component for a switchboard installed in IP55 coastal areas.
  
  [Features]
  - Low pressure loss (approximately half that of conventional products).
  - Efficiently collects sea salt particles.
  - Long lifespan (more than twice that of conventional products).
  - Even if collected sea salt particles deliquesce from the filter, the pressure loss increases only a little.
  - Deliquesced sea salt particles flow out downstream, ensuring minimal re-entrainment.
  - Superior impact resistance.

  • Volume Discount

  2D CAD data available

  Starting from∗ ：	586.50 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Anti-Water Jet Gallery (Plastic Cover), IP45

  SHINOHARA ELECTRIC

  For ventilating cubicles and switchboards installed in harsh outdoor conditions. The protective plastic cover keeps the unit lightweight.
  
  [Features]
  - The plastic-resin rear anti-pull-in cover reduces weight and improves workability.
  - No paint required for the anti-pull-in cover, reducing costs.
  - Strong waterproofing that can pass JISC4620/JISC0920 anti-water jet testing (IP45).

  2D CAD data available

  Starting from∗ ：	119.08 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Gallery with Fan (stainless steel) IP45

  SHINOHARA ELECTRIC

  Gallery with fan that is usable outdoors.
  
  [Features]
  · Has a water repellent filter for a structure with superior waterproofing.
  · Can be mounted to panels with simple hexagonal machining.
  · Set includes fan finger guard and power supply cord.
  · Filter can be washed and reused.
  · Available in beige 5Y7/1 and cream 2.5Y9/1 colors.

  Starting from∗ ：	336.78 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Plastic Gallery, PC Series

  SHINOHARA ELECTRIC

  Plastic galleries for control panels and instrument panels. The filter can be replaced from the front panel. (Plastic)
  
  [Features]
  · The task of installing has been streamlined by a simple one-touch mounting to the panel apertures.
  · The superior aesthetic appearance can enhance the commercial value of panels by sequential vertical/horizontal mounting.
  · The filter can be replaced by simply removing the front panel of the gallery.
  · 4.90 sq.mm, 120 sq.mm, and 160 sq.mm fans can be mounted.

  2D CAD data available

  Starting from∗ ：	14.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Blow-in Prevention Gallery, IP45

  SHINOHARA ELECTRIC

  Use the blow-in prevention gallery as a ventilation part for cubicles and switchboards in harsh outdoor conditions.
  
  [Features]
  - No ventilation holes need to be cut in large panels.
  - Retrofit this component on installed ventilation galleries.
  - The ventilation gallery and blow-in prevention cover are a single part, making it waterproof up to the JIS C 4602/JIS C 0920 standards (blow-in prevention tests).
  - Stainless steel ventilation galleries also available.

  • Volume Discount

  2D CAD data available

  Starting from∗ ：	149.99 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...