TAKIGEN For Sealable Type（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Stainless Steel Container Handle FA-1810
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· Left and right combination- 2D / 3D CAD data available
Starting from∗ ： 147.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stainless Steel Container Handle FA-1811N
TAKIGEN
[Features]
· Conventional product FA-810 small type.
· The handle, plate etc. were changed from cast iron to stainless steel.
· Made of stainless steel, corrosion resistant.
· Left and right combination- 2D / 3D CAD data available
Starting from∗ ： 121.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 273.74 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Stainless Steel Safety Corner Handle (with Escape Device) FA-1619
TAKIGEN
[Features]
· There is a safety push bar (FC-605) which is a safety mechanism that can be open the door, even when locked with a padlock.
· The mounting position and tightening margin of the plate can be finely adjusted.
· Made of stainless steel, corrosion resistant.
· Left and right combination- 2D CAD data available
Starting from∗ ： 103.61 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Sealed Handle with Stainless Steel Trigger FA-1110-W
TAKIGEN
[Features]
· A strong seal can be achieved.
· It locks at the open / close position with a trigger function.
· It also prevents rotation due to vibration.
· Conventional products FA-1110-3 are compatible with installation.
· For both left hand and right hand use- 2D CAD data available
Starting from∗ ： 106.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stainless Steel Hatch Lock A-1288
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· The stopper lifts vertically by rotation of the handle and seals the door.
· It is a waterproof sealed type.
· Waterproof standard IPX3 equivalentStarting from∗ ： 213.04 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Seal Handle with Stainless Steel Lock FA-1926
TAKIGEN
[Features]
· It is a handle with a locking mechanism that will not open from vibration, shock, etc.
· Key pin of ø6 is attached.
· Heads of padlocks (C-555) Can be used together.
· Rigid structure- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 102.34 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 268.69 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Starting from∗ ： 105.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stainless Steel Sealing Safety Handle FA-1605
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· There is a safety mechanism that can be operated by an internal safety push bar from the inside of the cabinet, even when it is locked with a padlock.
· Key pin and padlock (C-555), and Chief padlock (C-555) can be used together- 2D CAD data available
Starting from∗ ： 118.10 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Stainless Steel Sealing Handle FA-1112
TAKIGEN
[Features]
· Seal handles FA-1114/FA-114 are compatible for installation (B hole position).
· The torque of the handle can be adjusted with an adjustment nut.
· It is made of resin and stainless steel for excellent corrosion resistance.
· For both left hand and right hand use- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 44.57 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Small Stainless Steel Handle for Sealing FA-1728
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· It has a compact, yet strong structure, and also supports opening and closing of doors in intense situations.
· It is easy to use, functional and has a beautiful design.
· It features one-touch opening and closing- 2D / 3D CAD data available
Starting from∗ ： 142.20 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Double-Sided Stainless Steel Handle FA-1919-W for Sealing
TAKIGEN
[Features]
· Inner handle which can be used to open from the inside.
· Adjustment screws can adjust the rotating force of the handle.
· Left and right combination- 2D CAD data available
Starting from∗ ： 127.03 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Lift Handle A-234
TAKIGEN
[Features]
· This is a thin type with a protrusion of 4 mm and a depth of 25 mm from the panel mounting surface.
· You can feel a click when you pull up and rotate the handle so you can perform reliable operation.
· The stopper is lifted 3 mm by storing the handle.
· You can get sealing effects.
· The special locking mechanism can eliminate the conventional anxiety factors (rattling of the stopper, vibration of the rod and the rod falling from its own weight), ensuring secure locking.
· For opening to the right- 2D / 3D CAD data available
Starting from∗ ： 65.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Waterproof Lift Handle A-212
TAKIGEN
[Features]
· The stopper is lifted 3 to 5 mm by storing handle.
· You can get sealing effects.
· This is a simple structure in which you can lift the handle with your fingers.
· Waterproof type (using O ring and sheet packing).
· For both left hand and right hand use- 2D / 3D CAD data available
Starting from∗ ： 34.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Latch Handle FA-680
TAKIGEN
[Features]
· Two stage opening and closing is possible in combination with the double latch lock C-628, which is a safety feature to release hot air and steam such as with an oven.
· In combination with the latch lock, it can be opened and closed with one touch of the upper and lower two points of tightening.
· The large handle made of resin provides less heat conduction.
· It is an elegant, rounded design- 2D CAD data available
Starting from∗ ： 84.78 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Lift Handle A-201
TAKIGEN
[Features]
· Seal the door by pushing down on the handle.
· When pulling up the handle, the clasp retracts, and the opening and closing operation is done by rotating the handle left and right- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 25.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lift Handle A-202
TAKIGEN
[Features]
· Seal the door by pushing down on the handle.
· When pulling up on the handle, the clasp retracts and it can be opened and closed by rotating the handle.
· Left and right combination- 2D / 3D CAD data available
Starting from∗ ： 15.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lever Handle FA-601-F-H
TAKIGEN
[Features]
· Even when locked, there is a special lever handle FA-601-F-H that's operation is a safety mechanism that can be open the door(FA-601-F-H sold separately).
· For both left hand and right hand use- 2D CAD data available
Starting from∗ ： 73.19 € Min. Shipping Days ： 56 Days *Unit price with basic configuration
-
Roller Tightening Handle FA-836
TAKIGEN
[Features]
· Close even a large door securely.
· Antibacterial treatment is applied to the grip.
· There are plates for embedding (FA-836S-1), and for imposition (FA-836S-2, FA-836S-3).
· The plate (FA-836S-1) mounting position can be fine-tuned.
· The opening operation is smooth with a built-in spring in the handle.
· There is a right and a left (they both open to the right in this figure)- 2D / 3D CAD data available
Starting from∗ ： 63.06 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Lock Handle FA-630
TAKIGEN
[Features]
· The rod moves up and down 23 mm vertically and closes the door firmly.
· You can identify whether it is locked (green) or unlocked (red).
· The direction of handle operation has been clarified with arrows.
· The rod mounting position can be adjusted.
· For right rotation or for left rotation (the photograph in this figure shows right rotation)- 2D CAD data available
Starting from∗ ： 99.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Seal with Lock FA-926
TAKIGEN
[Features]
· It is a handle with a locking mechanism that will not open from vibration, shock, etc.
· Key pin of ø6 is attached.
· Heads of padlocks (C-555) Can be used together.
· Rigid structure- 2D CAD data available
Starting from∗ ： 103.61 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Seal with Lock FA-927
TAKIGEN
[Features]
· It is a handle with a locking mechanism that does not open from vibration, impact, etc.
· Can be used together with Key pin and padlock, Chief padlock (C-555).
· Rigid structure- 2D CAD data available
Starting from∗ ： 57.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
One Touch Corner Handle FA-935
TAKIGEN
[Features]
· When you pull the button, the lock is released and you can open it.
· The plates position is adjustable during installation and the tightening margin can be adjusted- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 73.81 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Safety Color Handle for Antibacterial Sealing FA-662
TAKIGEN
[Features]
· Prevents growth of bacteria and mold.
· Sustains the antimicrobial effect semipermanently.
· Safety handle for sealing FA-602 compatible.
· Fully designed with a cosmetic cover· It has a safety mechanism where it can be opened through operation of FC-701/FC-702) even if it is locked with a padlock.
· Can be locked with a key pin (FA-662-P) and padlock(C-555-30/35).
· For both left hand and right hand use- 2D / 3D CAD data available
Starting from∗ ： 18.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Small Extended Bolt Lock A-363
TAKIGEN
[Features]
· Low cost extended bolt lock.
· Since they are front faced, installation and maintenance are easy.
· Waterproof for right/left- 2D / 3D CAD data available
Starting from∗ ： 54.37 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Small Handle Plate FA-727S
TAKIGEN
The height can be adjusted with the plate screws.- 2D / 3D CAD data available
Starting from∗ ： 13.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Large Sealing Handle FA-625
TAKIGEN
[Features]
· It has a newly designed large-sized sealing handle.
· Strong sealing can be achieved.
· The key can be inserted and removed when locking and unlocking.
· Employs a sliding cap.
· Cap operation is smooth- 2D CAD data available
Starting from∗ ： 81.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Large Faceted Lock Handle A-388N
TAKIGEN
[Features]
· Please apply high-performance lubricant C-985 to ensure long-term use.
· We recommend the application of a "Loosening prevention agent" on the screws for the stopper plate of this product in order to prevent looseness.
· Please be aware that rotating the key more than necessary may damage the lock/key tip- 2D CAD data available
Starting from∗ ： 106.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Canopy Sealing Handle FA-908
TAKIGEN
[Features]
· It is the best front facing handles for canopy type sealing doors.
· A high Security lock TAK70 is standard equipment.
· You can also rearrange it into TAK60/TAK80.
· Extruded material is used for the grip part, and elongated items can also be produced (standard is 230 mm)- 2D CAD data available
Starting from∗ ： 99.71 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Two-Stage Corner Handle FA-635
TAKIGEN
[Features]
· Once the lever is pulled, the door opens about 12 mm and then fully opens by pulling the lever again.
· It is ideal for when you need to escape steam.
· Heat resistant type with vinyl coating on the hand grip (up to 100° C).
· It is possible to finely adjust the mounting position.
· For both left hand and right hand use- 2D CAD data available
Starting from∗ ： 142.20 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Equipped with an Escape Device Plate FA-702S-4
TAKIGEN
[Features]
· A double safety escape mechanism that adopts a safety device, not only for the handle, but also for the plate to prevent trapping accidents.
· When you push the internal safety push rod strongly in case of emergency, the plate separates from the latch and the door opens when you push on it- 2D CAD data available
Starting from∗ ： 73.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Lift Handle A-204
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· (A-1204).
· Tighten the door by pushing down on the handle.
· When pulling up the handle, the clasp retracts about 3 mm, and it can be opened and closed using the handle.
· Left and right dual use type.
· Improved waterproofness. (Packing used in and outside)- 2D / 3D CAD data available
Starting from∗ ： 26.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Lift Handle A-205
TAKIGEN
[Features]
· Seal the door by pushing down on the handle.
· When pulling up the handle, the clasp retracts about 3 mm, and it can be opened and closed using the handle.
· Left and right dual use type.
· Improved waterproofness. (Packing used in and outside)- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 22.97 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Flat Lift Handle A-214
TAKIGEN
[Features]
· Seal the door by pushing down on the handle.
· When pulling up the handle, the clasp retracts about 3 mm, and it can be opened and closed using the handle.
· Left and right dual use type.
· Improved waterproofing (used for packing inside and outside)Starting from∗ ： 62.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Closed Adjustable Handle A-209
TAKIGEN
[Features]
· Ideal for doors which are required to be airtight.
· Ideal for vibrating equipment.
· Fine adjustment of grip position is possible with the adjusting screw.
· Waterproof type (O ring used).
· It is excellent in corrosion resistance due to its powder coating.
Easy installation- 2D / 3D CAD data available
Starting from∗ ： 105.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Closed Adjustable Handle A-309
TAKIGEN
[Features]
· Flat design without protrusions.
· One touch open with push button.
· The airtightness of the door can be finely adjusted with the adjusting screw.
· Waterproof type (O ring, packing is used).
· Lockable with reversible key with dust proof shutter- 2D CAD data available
Starting from∗ ： 46.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sealed Cover Lock A-838
TAKIGEN
[Features]
· Increases the shielding ability of the hook part, and minimizes sound leakage.
· Flat type with few protrusions from the door surface.
· You can tighten three points in combination with the interlocking unit.
· A lock with a dust-proof shutter comes standard.
· You can use it as an alternative to A-858 which is a cover lock for construction machine that is a product discontinued in the catalog- 2D / 3D CAD data available
Starting from∗ ： 13.82 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Sealed Small Cover Lock A-839
TAKIGEN
[Features]
· Improved the shielding property of the hook.
· Keeps sound leakage to a minimum.
· Flat type with few protrusions from the door surface.
· Dust proof shutter lock included as standard- 2D / 3D CAD data available
Starting from∗ ： 32.63 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Sealing Corner Handle FA-611
TAKIGEN
[Features]
· It is a side-mounted type sealed handle.
· The semicircular claw meshes with the roller seat to draw-in and tightly close the door.
· the roller seat can be adjusted 2 mm forward and backward from the reference position for tightening.
· In addition to the included key, it is possible to lock with a padlock (recommended padlock C-551).
· Left and right combination- 2D / 3D CAD data available
Starting from∗ ： 13.82 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Sealing Corner Handle FA-614
TAKIGEN
[Features]
· It is the most common, economic type.
· The mounting position and tightening margin of the plate can be finely adjusted.
· Can be used in high temperatures such as with an oven.
· Left and right combination- 2D CAD data available
Starting from∗ ： 71.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sealing Corner Handle FA-615
TAKIGEN
[Features]
· Heat-resistant type (up to 100°C) with a vinyl coating on the hand grip.
· Can be used in high temperatures, such as with an oven- 2D / 3D CAD data available
Starting from∗ ： 122.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 81.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 57.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Anti-Bacterial Plate for Safety Color Handle for Sealing FA-662S
TAKIGEN
[Features]
· Prevents growth of bacteria and mold.
· Sustains the antimicrobial effect semipermanently.
· The installation is FA-602 plate is compatible with FA-602S.
· Refreshed design with cosmetic cover.
· Since the mounting screws are hidden, the crime prevention is improved.
· The meshing position can be adjusted back and forth by 3 mm using the long hole.
· Loosen the screw of the plate and slide it to adjust the offset height.
· An emergency escape device is attached to prevent accidents of being trapped inside.
· When mounting the emergency escape device, use mounting part A and mounting part B, you can install it in two ways- 2D / 3D CAD data available
Starting from∗ ： 33.36 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN |
| Product Series | Stainless Steel Safety Corner Handle (with Escape Device) FA-1619 | Anti-Bacterial Plate for Safety Color Handle for Sealing FA-662S | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Starting from∗ | 147.26 € *Unit price with basic configuration | 121.97 € *Unit price with basic configuration | 273.74 € *Unit price with basic configuration | 103.61 € *Unit price with basic configuration | 106.78 € *Unit price with basic configuration | 213.04 € *Unit price with basic configuration | 102.34 € *Unit price with basic configuration Volume Discount | 268.69 € *Unit price with basic configuration | 105.77 € *Unit price with basic configuration | 118.10 € *Unit price with basic configuration | 44.57 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 142.20 € *Unit price with basic configuration | 127.03 € *Unit price with basic configuration | 65.23 € *Unit price with basic configuration | 34.81 € *Unit price with basic configuration | 84.78 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 25.82 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 15.98 € *Unit price with basic configuration | 73.19 € *Unit price with basic configuration | 63.06 € *Unit price with basic configuration | 99.27 € *Unit price with basic configuration | 103.61 € *Unit price with basic configuration | 57.98 € *Unit price with basic configuration | 73.81 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 18.16 € *Unit price with basic configuration | 54.37 € *Unit price with basic configuration | 13.38 € *Unit price with basic configuration | 81.15 € *Unit price with basic configuration | 106.78 € *Unit price with basic configuration | 99.71 € *Unit price with basic configuration | 142.20 € *Unit price with basic configuration | 73.19 € *Unit price with basic configuration | 26.13 € *Unit price with basic configuration | 22.97 € *Unit price with basic configuration Volume Discount | 62.32 € *Unit price with basic configuration | 105.06 € *Unit price with basic configuration | 46.41 € *Unit price with basic configuration | 13.82 € *Unit price with basic configuration | 32.63 € *Unit price with basic configuration | 13.82 € *Unit price with basic configuration | 71.74 € *Unit price with basic configuration | 122.44 € *Unit price with basic configuration | 81.89 € *Unit price with basic configuration | 57.27 € *Unit price with basic configuration | 33.36 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 10 Days | 10 Days | 6 Days | 10 Days | Same day | 10 Days | 6 Days | 10 Days | Same day | 10 Days | 6 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | 56 Days | 10 Days | 6 Days | 10 Days | 6 Days | Same day | 6 Days | 10 Days | 6 Days | 6 Days | 6 Days | 10 Days | 10 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 10 Days | 10 Days | 10 Days | 6 Days | 6 Days | 6 Days | 6 Days | 10 Days |
Loading...
Examples how you can use these components Test
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.