TAKIGEN Hinges
Search by sub-category
Flat Hinges
Detachable Hinges
Concealed Hinges
Damper Hinges, Spring Hinges
Other Hinges and Hinge Accessory
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Flat hinges / unperforated / asymmetrical, round on both sides / rolled / stainless steel / cloth polished / B-1031 / TAKIGEN
TAKIGEN
[Features]
· It is made of all stainless steel and has excellent corrosion resistance- 2D / 3D CAD data available
Starting from∗ ： 8.24 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Back Hinge for Stainless Steel Heavyweight B-1063
TAKIGEN
Cushion is attached to the hinge on the housing side.- 2D / 3D CAD data available
Starting from∗ ： 13.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-pivot hinges / 2-axis / 120°, 200° / stainless steel / FB-1729N / TAKIGEN
TAKIGEN
Made from stainless steel for superior corrosion resistance. Tighten the door horizontally up to 5 mm with a two-axis mechanism.
Use resin parts for shaft parts to suppress generation of particles. Remove the included stopper, to change the rotation angle.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 116.61 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring hinges / adjustable / stainless steel / barrel polished / B-1346 / TAKIGEN
TAKIGEN
Built-in spring reduces the cover weight / It stops at an arbitrary angle.
[Features]
· Built-in spring reduces the cover weight.
· Prevents accidents such as pinching your fingers because it holds the cover at an arbitrary angle.
· Adjustment of holding torque is possible using adjustment nut even after installation.
· Space can be effectively used by using it to replace the damper.- Stock
- 2D / 3D CAD data available
Starting from∗ ： 35.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Imposition Slide Hinge B-407
TAKIGEN
A surface mounting type slide hinge.
[Features]
·For 150° opening
·Since it is surface-installed type, no recessing machining is required
·Material: Cold rolled steel plate (SPCC)
·Surface finish: Chrome plating (MFCr)
[Applications]
·For switchboards / power distribution boards, control panels, and inspection doors- Volume Discount
- Stock
- 2D / 3D CAD data available
Starting from∗ ： 13.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stepped Hinge for Stainless Steel Equipment B-1567
TAKIGEN
[Features]
·Can be used by attaching an equal angle steel suitable for housing.
[Applications]
·For switchboards / power distribution boards, , measuring instruments, and communication equipment.- 2D / 3D CAD data available
Starting from∗ ： 10.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Torque hinges / resistance adjustable / POM / BP-150-1 / TAKIGEN
TAKIGEN
Hold the door at an arbitrary angle. Can change the tightness of the torque by turning the adjustment bolt.
Made from flame retardant materials.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 8.89 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Multi-pivot hinges / cylinder countersinks / 2-axis / 104°, 194°, 210° / stainless steel / FB-1736 / TAKIGEN
TAKIGEN
[Features]
· The door can be tightened horizontally up to about 10 mm by a 2-axis mechanism (tightening mechanism is required).
· Dry bearing (phosphor bronze) is used for the bearing part.
· Fine adjustment of door gasket and tightening O-ring is possible with adjustment screw.
· Made of stainless steel, corrosion resistant- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 112.84 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel Slide Hinge (100° Opening) B-1401
TAKIGEN
A general purpose slide hinge.
[Features]
·Material: Cold rolled stainless steel plate (SUS304).
·Surface finish: Polishing.
·Made of stainless steel, this product has excellent corrosion resistance.
·Available with or without a catch.
[Applications]
·For chemical storage cabinets and marine cabinets.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 13.38 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
U Type Back Hinge 1 Type B-531
TAKIGEN
Same size also available in stainless steel. See B-1531
[Features]
· An insertion and removal type hinge, it is easy to mount to a frame- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Flap hatch hinges / rolled / stainless steel / barrel polished / B-1057-5 / TAKIGEN
TAKIGEN
[Features]
· It is made of all stainless steel and has excellent corrosion resistance- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Torque hinges / resistance adjustable / stainless steel / B-1109 / TAKIGEN
TAKIGEN
Made from stainless steel for superior corrosion resistance. Since there is no metal friction, metal powder / noise is not generated.
Hinge torque is not really affected by environment temperature. Initial setting torque can be held for many years.- 2D / 3D CAD data available
Starting from∗ ： 7.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel Floating Hinge B-1564
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· Since the hinge strokes in the tightening direction, the packing can be compressed (a separate tightening mechanism is required).
· Maximum stroke width is 7.5 mm.
· Can be used for a full circumference tightening system- 2D / 3D CAD data available
Starting from∗ ： 132.62 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hinges / demountable / stainless steel / B-1094 / TAKIGEN
TAKIGEN
Easy to install detachable type.- 2D / 3D CAD data available
Starting from∗ ： 10.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flap arm hinges / B-440 / TAKIGEN
TAKIGEN
Ideal for reducing opening and closing of weighted covers, such as gratings.
[Features]
· Weighted covers such as gratings can be opened easily.
· Since it uses a spring, there is no worry of gas or oil leakage.
· Excellent corrosion resistance- 2D / 3D CAD data available
Starting from∗ ： 282.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hatch hinges / conical countersinks / zinc die-cast / chrome-plated / FB-930 / TAKIGEN
TAKIGEN
[Features]
· Ideal for flat type.
· Left and right combination- 2D / 3D CAD data available
Starting from∗ ： 36.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Step hinges / tapered countersinks / rolled / stainless steel, seawater resistant / barrel polished / B-1231 / TAKIGEN
TAKIGEN
Stainless steel, excellent in corrosion resistance, SUS316, is used for blades.- 2D / 3D CAD data available
Starting from∗ ： 8.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Continous Hinge Strips / non-perforated / rolled / stainless steel / mirror polished / B-1007 / TAKIGEN
TAKIGEN
Cut it to required length and use.- Volume Discount
- Stock
- 2D / 3D CAD data available
Starting from∗ ： 8.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel Interlocking Hinge B-1334
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· The opening angle is 180° and it can be used as a back hinge- 2D / 3D CAD data available
Starting from∗ ： 16.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Corner hinges / internal thread / zinc die-cast / FB-735 / TAKIGEN
TAKIGEN
Can use any, including flat, corner, back hinge, etc.- Volume Discount
- Stock
- 2D / 3D CAD data available
Starting from∗ ： 13.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / conical countersinks / brass / B-202 / TAKIGEN
TAKIGEN
Outer diameter of the shaft is small with the drawing material.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.76 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring hinges / opening / rolled / stainless steel / barrel polished / B-1046 / TAKIGEN
TAKIGEN
Classic spring hinge. Made from stainless steel for superior corrosion resistance.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring hinges / closing / rolled / stainless steel / barrel polished / B-1046-G / TAKIGEN
TAKIGEN
[Features]
· An opposite force acts in the closing direction.
· Conventional product spring fitted hinge B-1046-1 compatible with installation with reverse spring specification.
· Made of stainless steel, corrosion resistant.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 3.88 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Flag hinges / non-perforated / rolled / stainless steel / fine ground / B-1026 / TAKIGEN
TAKIGEN
[Features]
· Made of stainless steel and has excellent corrosion resistance.
·The leaves can be removed from the shaft, both upward and downward, making it easy to install.
· Left and right dual use type.
[Applications]
·For large tide-prevention doors, harbor facilities, large ships, and petroleum complexes.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 96.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spring hinges / unperforated / opening / rolled / steel / zinc chromated / B-46 / TAKIGEN
TAKIGEN
Classic spring hinge.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 1.23 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Large Slide Hinge B-863
TAKIGEN
[Features]
· While opening the door, it opens out in front, so there is no damage to the main body.
· Door opening is 180°.
· Right / left use (This figure / photo is for right)- Volume Discount
- Stock
- 2D / 3D CAD data available
Starting from∗ ： 38.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
U-Shaped Stepped Back Hinge B-530
TAKIGEN
[Features]
· Ideal for housings with steps.
· Bent portion is subjected to drilling process- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Corner hinges / conical countersinks / 180° (90° detent) / zinc die-cast / B-845 / TAKIGEN
TAKIGEN
[Features]
· Unlike the stay type, it does not take up space.
· Click on the stainless steel ball at 90° intervals.
· Easy to install on surface type.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 23.04 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Server Rack Hinge B-142
TAKIGEN
[Features]
· The hinge pin can be easily pulled out, making the door easily detachable.
· In this mechanism a pin is held by a spring, which makes it resistant to vibration.
· Left / right dual use type (change to left specification by rearranging the pins)- 2D / 3D CAD data available
Starting from∗ ： 6.54 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel L Type Back Hinge (2 Pipe) B-1525
TAKIGEN
[Product Information]
· <Common items>
· Body type: Rear Hinge, Concealed Hinge
· Length L (mm): 70
· Material: Stainless steel plate (SUS304)
· Surface finish: Fabric
· Width W (mm): 22
· Plate thickness t (mm): 3- 2D / 3D CAD data available
Starting from∗ ： 12.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel U Bend Back Hinge B-1540
TAKIGEN
[Product Information]
· <Common items>
· Body type: Rear Hinge, Concealed Hinge
· Material: Stainless steel plate (SUS304)
· Surface finish: Fabric- 2D / 3D CAD data available
Starting from∗ ： 9.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1057-4 / TAKIGEN
TAKIGEN
[Features]
· It is made of all stainless steel and has excellent corrosion resistance- Volume Discount
- 3D CAD data available
Starting from∗ ： 4.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat hinges / conical countersinks / asymmetrical / rolled / stainless steel, seawater resistant / barrel polished / B-1234 / TAKIGEN
TAKIGEN
Stainless steel, excellent in corrosion resistance, SUS316, is used for blades.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.08 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / unperforated / rolled / stainless steel / mirror polished / B-1078 / TAKIGEN
TAKIGEN
Made from stainless steel for superior corrosion resistance.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Torque hinges / tapered / adjustable damping function / PBT / BP-879-2H / TAKIGEN
TAKIGEN
Correct damper characteristics can be obtained within the rotation range of 110°.- Volume Discount
- Stock
- 2D / 3D CAD data available
Starting from∗ ： 18.92 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Door wing hinges / conical countersinks / zinc die-cast / chrome-plated / FB-760 / TAKIGEN
TAKIGEN
- 2D CAD data available
Starting from∗ ： 21.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rotary dampers / hexagonal / B-879 / TAKIGEN
TAKIGEN
Correct damper characteristics can be obtained within the rotation range of 180°.
Due to its compact hexagonal shape, setting it into the door is easy.
[Features]
<B-879-0>
· Damper characteristics: closing time 5 ± (2.5 seconds).
· In a tolerance test of 100,000 repetitions, closing time is more than 1.5 seconds.
<B-879-1>
· Correct damper characteristics can be obtained within the rotation range (in the direction of the arrow) of 180° (rotation in the reverse direction of the arrow is no load).
· Due to the compact hexagonal shape, setting it into the door is easy.
· Damper characteristics: closing time 10 ± 5 seconds.
· In a tolerance test of 100,000 repetitions (at normal temperature), closing time is more than 2.5 seconds.- Volume Discount
- Stock
- 2D / 3D CAD data available
Starting from∗ ： 16.96 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Rotary dampers / hexagonal / BP-879 / TAKIGEN
TAKIGEN
[Features]
· Appropriate damper characteristics can be obtained within the rotation range (in the direction of the arrow) of 180° (rotation in the reverse direction of the arrow is no load).
· Due to the compact hexagonal shape, setting it into the door is easy.
· Damper characteristics: closing time 10 ± 5 seconds.
· In a tolerance test of 100,000 repetitions (at normal temperature), closing time is more than 2.5 seconds.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 11.97 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Multi-link flat hinges / conical recesses / 2-axis / rounded sash / brass / B-213 / TAKIGEN
TAKIGEN
With 2 axis, the door opens at 180°.
[Features]
· Select from 2 kinds of finish, chrome plating and white bronze plating.
· With 2 axis mechanism, the door opens at 180°- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 27.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / conical countersinks / brass / B-201 / TAKIGEN
TAKIGEN
Outer diameter of the shaft is small with the drawing material.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 15.51 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Detachable Type Pivot Hinge B-119
TAKIGEN
[Features]
·When installing a door using lift-off hinges, it was necessary to insert the top and bottom hinges at the same time, which was difficult to work with, but with this product, you can work reliably by setting the spring and stopper one by one.
·You can lock the shaft so that it does not move down once it comes out. (B-119-W).
·For left and right directions.
[Applications]
·For power distribution boards, control panels, and inspection doors.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 4.88 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
L Type Back Hinge (3 Pipe) B-525
TAKIGEN
Same size also available in stainless steel. Refer to B-1525- 2D / 3D CAD data available
Starting from∗ ： 4.25 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
U Type Back Hinge 3 Type B-562-1
TAKIGEN
[Features]
· The U-shaped part is large, and is suitable for the outward opening door of a large housing- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spring hinges / opening / rolled / stainless steel / barrel polished / B-1146 / TAKIGEN
TAKIGEN
B-1046 strong spring pressure type. Made from stainless steel for superior corrosion resistance.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.34 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Torsion hinges / internal thread / damping function / stainless steel / fine ground / B-1999-D / TAKIGEN
TAKIGEN
[Features]
· Damper mechanism is incorporated with B-1999.
· Weight of the door is reduced by the spring force of the torsion arm, and the built-in damper controls the operating speed in the closing direction.
· Prevents sharp lid closure and the resulting shock.
· Ideal for casings with a structure where gas dampers can not be used- 2D / 3D CAD data available
Starting from∗ ： 552.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Type |
| Flat Hinge Type |
| Detachable Flag Hinges Type |
| Length L *Figure in () is the min length of the adjustable type.(mm) |
| Operating Environment |
| Main Body Material |
| Main Body Surface Treatment |
| Width W(mm) |
| Additional Function |
| Left/Right Side |
| Mounting Method |
| Mounting Screw Hole Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN |
| Product Series | Multi-pivot hinges / 2-axis / 120°, 200° / stainless steel / FB-1729N / TAKIGEN | Spring hinges / adjustable / stainless steel / barrel polished / B-1346 / TAKIGEN | Torque hinges / resistance adjustable / POM / BP-150-1 / TAKIGEN | Flap hatch hinges / rolled / stainless steel / barrel polished / B-1057-5 / TAKIGEN | Torque hinges / resistance adjustable / stainless steel / B-1109 / TAKIGEN | Hatch hinges / conical countersinks / zinc die-cast / chrome-plated / FB-930 / TAKIGEN | Corner hinges / internal thread / zinc die-cast / FB-735 / TAKIGEN | Flat hinges / conical countersinks / brass / B-202 / TAKIGEN | Spring hinges / opening / rolled / stainless steel / barrel polished / B-1046 / TAKIGEN | Spring hinges / closing / rolled / stainless steel / barrel polished / B-1046-G / TAKIGEN | Flag hinges / non-perforated / rolled / stainless steel / fine ground / B-1026 / TAKIGEN | Spring hinges / unperforated / opening / rolled / steel / zinc chromated / B-46 / TAKIGEN | Corner hinges / conical countersinks / 180° (90° detent) / zinc die-cast / B-845 / TAKIGEN | Flat hinges / unperforated / rolled / stainless steel / mirror polished / B-1078 / TAKIGEN | Torque hinges / tapered / adjustable damping function / PBT / BP-879-2H / TAKIGEN | Door wing hinges / conical countersinks / zinc die-cast / chrome-plated / FB-760 / TAKIGEN | Multi-link flat hinges / conical recesses / 2-axis / rounded sash / brass / B-213 / TAKIGEN | Flat hinges / conical countersinks / brass / B-201 / TAKIGEN | Spring hinges / opening / rolled / stainless steel / barrel polished / B-1146 / TAKIGEN | ||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | 8.24 € Special price *Unit price with basic configuration Promotional pricing | 13.66 € *Unit price with basic configuration | 116.61 € *Unit price with basic configuration Volume Discount | 35.54 € *Unit price with basic configuration | 13.26 € *Unit price with basic configuration Volume Discount | 10.33 € *Unit price with basic configuration | 8.89 € *Unit price with basic configuration Volume Discount | 112.84 € *Unit price with basic configuration Volume Discount | 13.38 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 6.06 € *Unit price with basic configuration Volume Discount | 6.86 € *Unit price with basic configuration Volume Discount | 7.26 € *Unit price with basic configuration | 132.62 € Special price *Unit price with basic configuration Promotional pricing | 10.63 € *Unit price with basic configuration | 282.96 € *Unit price with basic configuration | 36.26 € *Unit price with basic configuration | 8.31 € *Unit price with basic configuration | 8.45 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 16.71 € *Unit price with basic configuration | 13.89 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 5.76 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.06 € *Unit price with basic configuration Volume Discount | 3.88 € *Unit price with basic configuration Volume Discount | 96.37 € *Unit price with basic configuration Volume Discount | 1.23 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 38.44 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 5.42 € *Unit price with basic configuration Volume Discount | 23.04 € *Unit price with basic configuration Volume Discount | 6.54 € Special price *Unit price with basic configuration Promotional pricing | 12.94 € Special price *Unit price with basic configuration Promotional pricing | 9.46 € *Unit price with basic configuration | 4.98 € *Unit price with basic configuration Volume Discount | 6.08 € *Unit price with basic configuration Volume Discount | 2.82 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 18.92 € *Unit price with basic configuration Volume Discount | 21.06 € *Unit price with basic configuration | 16.96 € *Unit price with basic configuration Volume Discount | 11.97 € *Unit price with basic configuration Volume Discount | 27.58 € *Unit price with basic configuration Volume Discount | 15.51 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 4.88 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 4.25 € Special price *Unit price with basic configuration Promotional pricing | 5.40 € *Unit price with basic configuration Volume Discount | 7.34 € *Unit price with basic configuration Volume Discount | 552.01 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | 6 Days | Same day | 6 Days | Same day | 6 Days | Same day | Same day | Same day | Same day | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | 5 Days | Same day | 6 Days | Same day | Same day | Same day | Same day | 6 Days | Same day | Same day | 6 Days | Same day | Same day | Same day | 5 Days | 6 Days | Same day | Same day | Same day | 6 Days | Same day | Same day | 6 Days | Same day | Same day | Same day | 6 Days | Same day | 6 Days |
| Specifications |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Type | Long Hinges/Leaf Hinges | Hidden Type | Special Shape | Damper/Torque/Spring Hinge | Hidden Type | Hidden Type | Damper/Torque/Spring Hinge | Special Shape | Hidden Type | Hidden Type | Pivot Type | Damper/Torque/Spring Hinge | Hidden Type | Detachable Hinges | Damper/Torque/Spring Hinge | Special Shape | Flat Hinges | Flat Hinges | Hidden Type | Special Shape | Flat Hinges | Damper/Torque/Spring Hinge | Damper/Torque/Spring Hinge | Detachable Hinges | Damper/Torque/Spring Hinge | Hidden Type | Hidden Type | Special Shape | Hidden Type | Hidden Type | Hidden Type | Pivot Type | Flat Hinges | Flat Hinges | Damper/Torque/Spring Hinge | Long Hinges/Leaf Hinges | Rotary Type | Rotary Type | Flat Hinges | Flat Hinges | Hidden Type | Hidden Type | Hidden Type | Damper/Torque/Spring Hinge | Damper/Torque/Spring Hinge |
| Flat Hinge Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Parallel Type | Long Hinges | - | - | Square Plate Type | - | - | - | - | - | - | - | - | - | - | - | Square Plate Type | Square Plate Type | - | - | - | - | Machine Type | Square Plate Type | - | - | - | - | - |
| Detachable Flag Hinges Type | - | - | - | - | - | - | - | - | - | - | - | - | - | Tension Type | - | - | - | - | - | - | - | - | - | Flag Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length L *Figure in () is the min length of the adjustable type.(mm) | 40 ～ 50 | 55 ～ 80 | 75 ～ 124 | 108 ～ 258 | 48 | 62 | 50 ～ 72 | 138 ～ 200 | 60 | 60 | 70 | 30 ～ 90 | 126 | 75 | 442 | 96 | 50 | 120 ～ 1800 | 80 | 40 ～ 70 | 25 ～ 100 | 20 ～ 51 | 38 ～ 51 | 114 ～ 200 | 20 ～ 51 | 132.5 ～ 186.4 | 45 ～ 60 | 75 | 114.5 | 80 | 60 ～ 70 | 61 | 50 | 40 ～ 100 | 71 | 82 | 48 ～ 52 | 48 | 40 ～ 50 | 60 ～ 100 | 60 ～ 63.4 | 80 | 62 | 60 ～ 100 | 626 |
| Operating Environment | - | - | - | - | - | - | Standard | Standard / Corrosion Resistance | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Standard | - | - | - | - | - | - | - |
| Main Body Material | Stainless Steel | Stainless Steel | - | Stainless Steel | - | Stainless Steel | Resin | - | Stainless Steel | - | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | Zinc Alloy | - | Stainless Steel | Stainless Steel | Zinc Alloy | Brass | Stainless Steel | Stainless Steel | Stainless Steel | - | Steel | - | Zinc Alloy | - | Stainless Steel | Stainless Steel | - | - | Stainless Steel | Resin | Zinc Alloy | Zinc Alloy | Resin | Brass | Brass | - | - | - | Stainless Steel | - |
| Main Body Surface Treatment | Mirror Surface | Not Provided | Mirror Surface | Tumble Polish | Chrome Plating | Not Provided | Grain-finished | Mirror Surface | Buffed Surface | Colored Chromate | Tumble Polish | Tumble Polish | Mirror Surface | Not Provided | Zinc Plating | Chrome Plating | Tumble Polish | Mirror Surface | Tumble Polish | Chrome Plating | Chrome Plating | Tumble Polish | Tumble Polish | Brushed | Colored Chromate | Colored Chromate | Colored Chromate | Chrome Plating | Colored Chromate | Not Provided | Not Provided | Tumble Polish | Tumble Polish | Mirror Surface | Not Provided | Chrome Plating | Not Provided | Not Provided | Chrome Plating / Bronze Plating | Chrome Plating | Colored Chromate | Not Provided | Colored Chromate | Tumble Polish | Brushed |
| Width W(mm) | 135 ～ 190 | 33.5 ～ 41 | 48 ～ 82 | 70 ～ 90 | 83.5 | 62 | 37 ～ 56 | 88 ～ 168 | 54 | 28 | 18 | 35 ～ 82 | 51 | 16 | 96 | 116 | 40 | 25 ～ 50 | 51.4 | 19 ～ 33.5 | 32 | 14 ～ 38 | 32 ～ 38 | 164 | 14 ～ 38 | 86.3 ～ 134.6 | 76 | 20 | 22 | 21 | 18.5 ～ 22.5 | 11.5 | 54 | 35 ～ 60 | 25 ～ 50 | 136 | 16 ～ 26 | 16 | 70 ～ 72 | 50 ～ 80 | 16.8 | 21 | 98 | 40 ～ 50 | 50 |
| Additional Function | - | - | - | - | Not Provided | - | With Torque Function | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | With Damper | - | - | - | - | - | - | - |
| Left/Right Side | - | - | - | - | - | - | - | - | - | - | - | - | - | For Both Right and Left Sides | - | - | - | - | - | - | - | - | - | For Both Right and Left Sides | - | For Right Side / For Left Side | - | - | - | - | - | - | - | - | For Right Side / For Left Side | - | For Right Side / For Left Side / For Both Right and Left Sides | For Right Side / For Left Side | - | - | For Right Side / For Left Side | - | - | - | - |
| Mounting Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Screw Hole Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Type
-
Flat Hinge Type
-
Detachable Flag Hinges Type
-
Length L *Figure in () is the min length of the adjustable type.(mm)
- 2,000
- 6
- 6.5
- 10
- 17
- 18
- 19
- 20
- 21
- 22
- 23.5
- 24
- 25
- 25.5
- 26
- 27.5
- 29
- 30
- 30.5
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 38
- 39.5
- 40
- 40.5
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 48.5
- 49.5
- 50
- 50.5
- 51
- 52
- 53
- 54
- 54.5
- 55
- 56
- 57
- 59
- 60
- 61
- 62
- 63
- 63.4
- 63.5
- 64
- 65
- 66
- 67
- 68
- 70
- 71
- 71.7
- 72
- 73
- 75
- 75.5
- 76
- 76.5
- 76.7
- 77
- 78
- 79
- 80
- 81
- 81.7
- 82
- 83
- 84
- 85
- 86
- 86.7
- 87
- 87.5
- 88
- 89
- 90
- 92
- 94
- 95
- 95.3
- 96
- 96.5
- 97
- 100
- 101
- 101.2
- 101.5
- 101.7
- 102
- 103
- 104
- 106
- 107
- 108
- 109
- 110
- 113
- 114
- 114.5
- 115
- 117.5
- 118
- 120
- 121
- 123
- 124
- 125
- 126
- 126.5
- 127
- 130
- 132
- 132.5
- 135
- 138
- 139
- 139.7
- 140
- 144
- 145
- 148
- 149
- 150
- 151
- 152
- 152.5
- 153
- 154
- 155
- 158
- 160
- 161
- 161.5
- 162
- 170
- 180
- 183
- 184
- 186
- 186.4
- 190
- 200
- 201
- 204
- 210
- 222.3
- 224
- 225
- 250
- 258
- 264
- 289.3
- 300
- 340
- 350
- 400
- 442
- 450
- 476
- 576
- 600
- 626
- 750
- 850
- 900
- 1000
- 1200
- 1800
- 1829
- 1872
- 2000
- 2133
- 2400
- 2500
-
Operating Environment
- Standard
- Corrosion Resistance
- Abrasion Resistance
- Cleanroom
-
Main Body Material
-
Main Body Surface Treatment
-
Width W(mm)
-
Additional Function
- Not Provided
- With Damper
- With Stopper
- With Catches
- Bearing Built-in
- With Torque Function
- Spring Built-in
- With Fixing Function
- Others
-
Left/Right Side
-
Mounting Method
-
Mounting Screw Hole Type
Narrow search by specifying Brand
-
- MISUMI (41)
- TAKIGEN (360)
- NORELEM (126)
- KIPP (112)
- GANTER (53)
- ELESA (32)
- FUJI LATEX (29)
- TRUSCO NAKAYAMA (26)
- SOWA (21)
- HALDER (20)
- TOK BEARING (16)
- 999SHIMANO (5)
- HILOGIK (5)
- WAKISANGYO (5)
- ACCURATE (3)
- BEST (2)
- KYODO KINZOKU (1)
- ESCO (1)
- IMAO CORPORATION (1)
- MARUKI HARDWARE (1)
- SUGATSUNE KOGYO (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Hinges
-
- Closures
- Door Stays
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Gas Springs
- Parts, Small Work Pieces
- Hooks and Shackels
- Door Units
- Clamping Knobs
- Hanger Hooks
- Shelves, Shelf Supports, Shelf Poles
- Door Wheels
- Handles / Bow handles / Cup handles / Trough handles / Carrying handles
- Hinges
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.