THK Single Axis Actuators（With or without retainer：N/A）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 20 Days or Less 22 Days or Less 23 Days or Less 26 Days or Less

?* Information on days to ship and prices

Actuator KR26

THK

An actuator with a compact and high-stiffness structure that integrates an LM guide, ball screw, and support unit, making it ideal for high-precision positioning.
[Features]
・ In addition to the standard specifications, the manufacturer will semi-order 5 highly requested customs, and will promptly procure and ship after ordering.
[5 custom made]
・ Dowel holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products.
・ Positioning Metal Bolt: Install the positioning metal bolts for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor.
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover.
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance.
・ AFF grease for clean environment: Encloses clean environment-friendly grease (THK, AFF grease) to suppress dust generation.
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab.

2D / 3D CAD data available

Min. Shipping Days ： 23 Days
Actuator KR45H

THK

With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab

2D / 3D CAD data available

Min. Shipping Days ： 23 Days
Actuator KR20

THK

With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab

2D / 3D CAD data available

Min. Shipping Days ： 23 Days
Actuator KR30H

THK

With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab

2D / 3D CAD data available

Min. Shipping Days ： 23 Days

Min. Shipping Days ：	23 Days

Min. Shipping Days ：	23 Days

Min. Shipping Days ：	23 Days

Min. Shipping Days ：	23 Days


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Main Body/Peripheral Components
Nominal (Height)
Accuracy
Table
Lead(mm)
Motor Mounting Posture
Cover
Grease
The presence or absence of motor
With or w/o Lubrication Units
With or without retainer
The shaft diameter of a ball screw(φ)
Table length L1(mm)
Table width W1(mm)
Amplifier Voltage


Brand	THK	THK	THK	THK
Product Series	Actuator KR26	Actuator KR45H	Actuator KR20	Actuator KR30H
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	-	-	-	-
Min. Shipping Days ：	23 Days	23 Days	23 Days	23 Days
Main Body/Peripheral Components	Main Body	Main Body	Main Body	Main Body
Nominal (Height)	26	45	20	30
Accuracy	Standard Grade	Standard Grade	Standard Grade	Standard Grade
Table	Long 1 pc. / Long 2 pc.	Long 1 pc. / Long 2 pc. / Short 1 pc. / Short 2 pc.	Long 1 pc. / Long 2 pc.	Long 1 pc. / Long 2 pc. / Short 1 pc. / Short 2 pc.
Lead(mm)	2 ～ 6	10 ～ 20	1 ～ 6	6 ～ 10
Motor Mounting Posture	Straight / Folding back	Straight / Folding back	Straight / Folding back	Straight / Folding back
Cover	N/A / Available	N/A / Available	N/A / Available	N/A / Available
Grease	Standard / Low Dust Generation	Standard / Low Dust Generation	Standard / Low Dust Generation	Standard / Low Dust Generation
The presence or absence of motor	No (Built-in by the customer)	No (Built-in by the customer)	No (Built-in by the customer)	No (Built-in by the customer)
With or w/o Lubrication Units	N/A	N/A	N/A	N/A
With or without retainer	N/A	N/A	N/A	N/A
The shaft diameter of a ball screw(φ)	8	15	6	10
Table length L1(mm)	47.4 ～ 64	43.5 ～ 108	33.2 ～ 46	39.5 ～ 74.4
Table width W1(mm)	31 ～ 62	53 ～ 104	23 ～ 52	38 ～ 80
Amplifier Voltage	N/A	N/A	N/A	N/A