Indexing Plungers（Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  Indexing Plungers, PMY

  NABEYA BI-TECH

  Simple-structure indexing plungers. Excellent cost performance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Plunger PMX

  NABEYA BI-TECH

  Simple structure index plunger.
  [Features]
  · Superior cost performance.
  · For all pin diameters, coarse thread and fine thread are standardized.
  · Can select main body material quality and whether or not to include a lock nut using the product code.
  [Applications]
  · For positioning workpieces.
  · For attaching and detaching workpieces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.29 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plungers For Thin-Walled Pieces

  HALDER

  [Features]
  · Index bolt for through holes in thin sheets.
  · A fixing sleeve can be used to mount sheets 1 to 5 mm thick
  · For types with locks, pulling the knob and rotating it 90 degrees locks the mechanism with the notch.
  · For this element, depending on the thickness of the opposing part, the pin may not fit fully into the notch, even if the knob is pulled all the way out.
  · Operating temperature range: from -30 to +80°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.08 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Bolts With Flange

  HALDER

  [Features]
  · For index holes.
  · With flanges for mounting in a horizontal position.
  · Mounting holes feature double grease seals and thus can be mounted in both directions.
  · The operating temperature range of the plastic cap is from -30 to +80°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers with rest position, Stainless Steel / Plastic knob

  GANTER

  Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
  A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Locking plungers, PUSH-PUSH locking mechanism

  GANTER

  The indexing pin in the locking plungers GN 514 is moved via a so-called cardioid mechanism.
  
  This mechanism means that the indexing pin is both extended and retracted alone by pressing the operating button (PUSH-PUSH locking mechanism).
  
  Please note that the indexing pin cannot absorb any axial forces and that it retracts virtually by spring action; the indexing pin must therefore remain free and easy to move.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers / Plastic knob

  GANTER

  Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers Form C (K0338)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Easy handling
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form C (K0339)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers with rotation lock and lead-in chamfer, Form A (K1300)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.87 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing Plungers / Switch Lever / Fine Thread

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers / Resin Knob

  MISUMI

  [Features] The pin can be pushed in and out manually with a knob or lever. Suitable for temporary positioning of workpieces.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (Long Stroke) (NDXNE)

  IMAO CORPORATION

  As the nose length is long, It can be inserted deeply into the other side. Available in steel and stainless steel.
  
  [Features]
  - With the spring plunger hand operation, when the knob is pulled the nose retracts but can easily be released. Let go and the nose returns to the original state by means of the internal spring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Index Plunger (LBLT)

  IMAO CORPORATION

  Simple type index plunger ideal for temporary work fixing, etc.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.91 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Plungers Flange Type IPF

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. An index plunger with a fixed countersunk screw.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.74 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Index Bolt With Hexagon Collar 22120

  HALDER

  [Features]
  · For index holes.
  · Operating temperature range is from -30 to +80°C.
  · Use the distance collar (EH22120) to adjust the depth of the screw-in.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Bolt Simple Finish

  HALDER

  [Features]
  · For index holes.
  · Pulling the level retracts the pin. Rotate the lever to keep it in its rotated state.
  · Simple structure with a compact form.
  · Suitable for situations that do not require a high degree of precision when positioning.
  · Has a long stroke and can be used in a variety of applications, such as fixing doors in place.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.58 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Spring latches with flange for surface mounting

  GANTER

  Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
  Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers / Press Fit

  MISUMI

  [Features] Indexing plunger Press-fit type. Please drive it in from the top of the press-fit collar.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PXX

  NABEYA BI-TECH

  Indexing or positioning pin. Good abrasion resistance.
  
  [Features]
  - Indexing or positioning pin.
  - New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
  - Use a locking service for fixing indexing plungers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.55 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger - PFY

  NABEYA BI-TECH

  [Features]
  · A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
  · The long pin type PFY-H-A is ideal for mounting thick panels and frames etc.
  · Pull out the knob and rotate 90° to lock with the pin in a retracted state. · To unlock, pull the knob out slightly and rotate it 90°. · Returns to its original position via the action of the integrated spring.
  · The lock mechanism is integrated into the knob. Therefore, the overall length is the same as that of the PFX, which does not have a lock mechanism.
  · The pin has undergone hardening and offers excellent abrasion resistance.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Index Bolt

  HALDER

  [Features]
  · For index holes.
  · If the lever is rotated 180 degrees the pin retracts. The knob section can be used to maintain this state.
  · The operating temperature range of the plastic cap is from -30 to +80°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.58 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam action indexing plunger, Plunger pin retracted

  GANTER

  Cam action indexing plungers GN 712.1 are used in such applications where the plunger pin has to protrude only occasionally. When turning the cam by 90° resp. 120° degrees in clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is protruded.
  Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in protruded position (Type R), resp. is secured against accidental operation (Type S). In order to move the plunger pin, safety version Type S requires an additional pushing of the latch.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plunger, Steel / Plastic knob

  GANTER

  Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers with rest position, for thin walled equipment

  GANTER

  Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.
  It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
  For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.
  Indexing plungers with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers / Steel / GN 7017

  GANTER

  GN 7017 indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
  The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
  During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Locking plungers, Plunger protruded

  GANTER

  If not operated, the plunger of the locking plungers GN 816 protrudes. To retract, move against the spring force and hold in the end position by turning by 90°.
  The shape of the cam curve secures the plunger against accidental operation.
  When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
  For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, Stainless Steel / Plastic knob

  GANTER

  Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
  Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers / without rest position / GN 613

  GANTER

  The indexing plungers GN 613 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator, GN 817 indexing plungers are to be preferred.
  A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.78 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers with red knob / GN 817

  GANTER

  Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Mini indexing plungers

  GANTER

  Stainless Steel-Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
  Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type CN, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Mini indexing plungers, with and without rest position

  GANTER

  Stainless Steel-Mini indexing plungers GN 822.9 are distinguished for their small dimensions. They are mounted by countersunk screws.
  The Stainless Steel-Mini indexing plungers present an affordable alternative to the GN 608.5 and GN 608.6 Stainless Steel-Indexing plungers.
  In types C and CN, the button can be turned by 30° after retracting the indexing pin, holding it in the "retraced" position using the indexing lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Spring latches for welding / GN 722.1

  GANTER

  Stainless Steel-Spring latches GN 722.1 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
  The square bar allows the latch to be welded in any desired position. To prevent excessive heating up and the resulting change in the spring properties, fixing with welding spots is recommended.
  Stainless Steel-Spring latches GN 722.1 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.38 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Indexing plungers for welding, Steel / GN 722.4

  GANTER

  [Specifications]
  ・Type: A. with pull ring. mounted, AU. with pull ring. unmounted
  ・Material: ST. Steel precision casting
  
  With indexing plungers GN 722.4, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ST version is designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.66 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Indexing plunger with cam lever steel or stainless steel, Form B (K1584)

  KIPP

  [Specifications]
  ・Locknut: with locknut
  ・Material: Stainless Steel, Steel
  
  [Features]
  ・Simple and quick operation
  ・Suitable for high temperature applications
  ・With integrated detent function

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form D (K0338)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Easy handling
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Index Plungers, with hexagon collar, stainless steel A4

  HALDER

  Material

  Body

  • Stainless steel 1.4401
  

  Locking pin

  • Stainless steel 1.4401 nickel-plated
  

  Knob

  • Thermoplastic PA 6, black-grey, matt
  

  • Stainless steel 1.4401
  

  Lock nut

  • Stainless steel 1.4401
  

  Notes

  Knob not removable.

  Lock nuts have to be purchased separately.

  Select to compare

  Configure now
  Starting from∗ ：	18.17 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Indexing plungers without collar Form K (03096)

  NORELEM

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Threaded pins enable the indexing plunger to be operated
  
  · Material: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	7.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers with grip stainless steel Form A (03099)

  NORELEM

  · Can be used for all types of locking and fixating
  
  · The lock is released by turning the grip 180°
  
  · Indexing notch for holding the position

  Select to compare

  Configure now
  Starting from∗ ：	18.22 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers with grip stainless steel Form B (03099)

  NORELEM

  · Can be used for all types of locking and fixating
  
  · The lock is released by turning the grip 180°
  
  · Indexing notch for holding the position

  Select to compare

  Configure now
  Starting from∗ ：	18.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers / Tip Tapped

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PHY

  NABEYA BI-TECH

  Compact indexing plunger.
  
  [Features]
  - A compact indexing plunger.
  - Pull the knob and rotate 30° to lock with the pin retracted.
  - To unlock, pull the knob slightly and rotate 30°.
  - Returns to its original position via internal spring action.
  - Lock mechanism built into the knob.
  - Overall length is the same as a PHX without a lock mechanism.
  - Pin is nickel-plated for good abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.69 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger PPLX

  NABEYA BI-TECH

  [Features]
  - Indexing plunger for accurate positioning.
  - H7 pin diameter tolerance.
  - G6 hole tolerance recommended for the mating side.
  - Use with the positioning bushings for precise positioning.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	83.83 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Index Plunger (Nose Lock Model) (NDXN-L-ASUS)

  IMAO CORPORATION

  This has the nose-locking style that keeps the pin in a retracted state. It is all made of stainless steel so it is optimal for locations requiring rust resistance and for use in clean environments. It is available in two types, the nose hardening type and no-bake type.
  
  [Features]
  - It is a hand operated index plunger. Pull the knob and the nose retracts and the position release is easily done, let go of the knob and the nose returns to the original state by the force of the internal spring.
  - The nose locking type can be locked (fixed) by rotating the knob 90° while it is pulled and the nose is retracted.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-1

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.25 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...