Push-Down Workpiece Clamps（Type：Hold Down Type）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 8 Days or Less 9 Days or Less 14 Days or Less 18 Days or Less

?* Information on days to ship and prices

Screw Jacks / screw jack

HALDER

Trapezoidal self-locking thread, spindle with final safety device. The holders, which can be secured by means of the T-slots, make it possible to tighten the jacks so that they will not slip out of position when a workpiece is changed. They also allow to fit screw jacks to vertical clamping surfaces. Screw jacks are frequently used for supporting workpieces. Use of the self-aligning cap ensures a correctly aligned bearing surface. Using the centering plate as an intermediate element, it is possible to fit a number of screw jacks sizes 52, 70 and 100 together one above the other.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	32.18 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamping Element Systems

HALDER

[Specifications]
・Type: Hold Down Type
・Arm Height Type: Standard
・Material: Steel
・Wearing parts: Heat-treated steel

Clamping Element Systems.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	287.55 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamps, with soft face

HALDER

The brass plate protects the workpiece from damage. The combination of nut DIN 6330 B (EH 23070.)/conical seat DIN 6319 G (EH 23050.) on the clamping bolt and thrust pad DIN 6311 (EH 22560. removable) on the adjusting screw compensates for the lack of parallelity. The clamp can be used either way (soft or hard clamping surface).

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	24.25 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamps, DIN 6314 flat

HALDER

Heat-treated steel, varnished.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.08 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamps, DIN 6316 with goose-neck

HALDER

Heat-treated steel, varnished.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.09 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamps, DIN 6315 B forked

HALDER

Heat-treated steel, varnished.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	9.12 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamps, with flat-faced ball

HALDER

Ball protected against rotating.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	27.84 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamping Elements

HALDER

Used as clamps in conventional fixtures. A reamed hole is provided in the body of the fixture. The hole depth has to be adapted to the desired clamping height. To provide a counter force, a support can be placed against the rounded end of the clamp (radius 22). This support can be flat, half-rounded or V-shaped. Clamping is achieved by means of a DIN 933 hexagon screw.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	224.35 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Down-Thrust Clamps, size 82,5

HALDER

The down-thrust clamp is a universal mechanical clamp that allows fast and easy exchange and clamping of workpieces - as the clamping head can be easily manually swivelled to clear the workpiece.
The down-thrust clamps provide the following advantages:

- compact footprint
- clamping force of up to max. 30 kN via a clamping screw WS 36
- clamping head swivels 360°
- clamping stroke 30 mm
- clamping height max. 250 mm
- integrated clamping height stop for safe use
- fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing of 100 x 100 mm

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,734.53 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamps, stepped

HALDER

Heat-treated steel, tempered, blackened.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	42.30 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamps, with nose, closed

HALDER

Thanks to the closed slot, the clamp is suitable for an application with rotating workpieces.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	106.55 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamps, with nose

HALDER

Heat-treated steel, tempered, blackened.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	24.25 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamps, slotted, with adjustable counter piece

HALDER

The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	93.04 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamps, slotted, with adjustable counter piece, with T-Bolt

HALDER

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	108.70 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamps, slotted, with adjustable counter piece, with stud

HALDER

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	106.37 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamps, slotted, with adjustable counter piece, with stud with internal hexagon

HALDER

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	116.46 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Compact Clamps

HALDER

The compact clamps are all purpose clamping elements. Due to the self-locking clamping lever application can either take place in horizontal or vertical position in both, machined and raw workpieces.
Features:
- exact and position precise clamping
- ease of operation
- high clamping force at low tightening torques, abrasion-resistant due to clamping lever with bearings
- continuous, large clamping area
- clamping lever entirely retractable for hindrance-free exchange of workpieces
- threaded clamping lever can be used with many clamping elements, e.g. ball-ended thrust screws (EH 22700. - EH 22720.), self-aligning pads (EH 22730./EH 22740.) etc.
- large adjusting range at constant clamping force
- continuous height adjustment by height adaptors 23690.0112/.0116
- easy and flexible set up
- corrosion-resistant
- resistent to dirt and chips

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	308.56 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Straight Clamps, short

HALDER

[Specifications]
・Type: Hold Down Type
・Material: Heat Treatment Steel
・a(mm): 20, 30

Straight Clamps, short.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	39.90 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Straight Clamps, long

HALDER

[Specifications]
・Type: Hold Down Type
・Material: Heat Treatment Steel
・a(mm): 20, 30
・b1(mm): 12.5, 17

Straight Clamps, long

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	55.98 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Tightening Force (Range Selectable)(N)
Material
Type
Type
Applicable Tightening Force(N)
Stroke S(mm)
Arm Height Type
Arm Length Type

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER
Product Series	Screw Jacks / screw jack	Clamping Element Systems	Clamps, with soft face	Clamps, DIN 6314 flat	Clamps, DIN 6316 with goose-neck	Clamps, DIN 6315 B forked	Clamps, with flat-faced ball	Clamping Elements	Down-Thrust Clamps, size 82,5	Clamps, stepped	Clamps, with nose, closed	Clamps, with nose	Clamps, slotted, with adjustable counter piece	Clamps, slotted, with adjustable counter piece, with T-Bolt	Clamps, slotted, with adjustable counter piece, with stud	Clamps, slotted, with adjustable counter piece, with stud with internal hexagon	Compact Clamps	Straight Clamps, short	Straight Clamps, long
CAD	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D
Starting from^∗	32.18 € *Unit price with basic configuration	287.55 € *Unit price with basic configuration	24.25 € *Unit price with basic configuration	7.08 € *Unit price with basic configuration	14.09 € *Unit price with basic configuration	9.12 € *Unit price with basic configuration	27.84 € *Unit price with basic configuration	224.35 € *Unit price with basic configuration	1,734.53 € *Unit price with basic configuration	42.30 € *Unit price with basic configuration	106.55 € *Unit price with basic configuration	24.25 € *Unit price with basic configuration	93.04 € *Unit price with basic configuration	108.70 € *Unit price with basic configuration	106.37 € *Unit price with basic configuration	116.46 € *Unit price with basic configuration	308.56 € *Unit price with basic configuration	39.90 € *Unit price with basic configuration	55.98 € *Unit price with basic configuration
Min. Shipping Days	3 Days	3 Days	Same day	Same day	Same day	Same day	Same day	4 Days	4 Days	Same day	4 Days	Same day	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days
Tightening Force (Range Selectable)(N)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Material	Stainless Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel
Type	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body
Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type
Applicable Tightening Force(N)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Stroke S(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Arm Height Type	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Standard	-	-
Arm Length Type	-	-	-	Standard	Standard	Standard	Standard	-	-	Standard	Standard	Standard	Standard	Standard	Standard	Standard	-	-	-