Bearing Units（Bearing Unit, Type：Pillow Type Page 3）

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

• 

  Ball Pillow Block Bearings TUCP, Thermoplastic Housing with Stainless Steel Bearing, White

  MAEDLER

  Material: Housing: Thermoplast PBT, white.
  Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
  The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
  The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
  Delivery with stainless steel grease nipple.
  Temperature range: -20°C to +90°C (for short time up to +120°C).
  
  * Maximum radial load if axial force = 0.
  ** Maximum axial load if radial force = 0.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	26.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball Pillow Block Bearings TUCP, Thermoplastic Housing with Stainless Steel Bearing, Black

  MAEDLER

  Material: Housing: Thermoplast PBT, black.
  Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
  The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
  The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
  Delivery with stainless steel grease nipple.
  Temperature range: -20°C to +90°C (for short time up to +120°C).
  
  * Maximum radial load if axial force = 0.
  ** Maximum axial load if radial force = 0.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	24.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball Pillow Block Bearings SSUP, Light Series, with Eccentric Ring

  MAEDLER

  Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
  
  The rolling bearing can be swiveled when mounting to compensate shaft misalignment. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball Pillow Block Bearings SSUCPA, Stainless Steel

  MAEDLER

  Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
  
  The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
  The shaft will get fastened with 2 setscrews.
  Lubricated for life at normal operating conditions. Re-lubricating is possible.
  
  Delivery with stainless steel grease nipple.
  
  * Maximum radial load if axial force = 0.
  The axial load rating is approx. 20% of the radial load rating.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.67 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball Pillow Block Bearings SSUCP, Stainless Steel

  MAEDLER

  Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
  
  The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
  
  Delivery with stainless steel grease nipple.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	46.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Pillow Block Bearing Units BK, for Fixed Side, Black Oxided

  MAEDLER

  Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearings.
  Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes.
  Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers.
  Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	87.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Pillow Block Bearing Units BF, for Support Side, Black Oxided

  MAEDLER

  Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearing.
  Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 6 mounting holes.
  Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
  Matching counterpart for fixed side: Pillow Block Bearing BK.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	37.99 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Pillow Block Bearing Units EK, for Fixed Side, Nickel-plated

  MAEDLER

  Material: Housing from steel, all surfaces machined, nickel-plated. With quality rolling bearings.
  Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals.
  Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers.
  Matching counterpart for support side: Pillow Block Bearing EF.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	100.22 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...