Bearing Units（Page 6）

Search by sub-category

609

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Flange Bearing Units FF, for Support Side, Black Oxided

MAEDLER

Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearing.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 4 mounting holes.
Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for fixed side: Flange Bearing FK.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.62 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Floating bearing unit Type EF, block version, form B, steel (24078)

NORELEM

· With deep groove ball bearing

· The axis height of the spindle bearing matches the fixed bearing unit 24078-01

Select to compare

Configure now
Starting from^∗ ：	49.27 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Insert bearing B, ball-bearing steel (24235)

NORELEM

· Inside rings for easier fastening

· Internal diameter with plus-tolerance

· Lubricated for entire service life

Select to compare

Configure now
Starting from^∗ ：	12.93 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow block bearing flange bearing, stainless steel (24242)

NORELEM

· With a sealed, single-row ball bearing or plastic slide bearing

· Compensates for misalignments on the shaft

· Internal diameter of the bearings with plus-tolerance

· Maintenance-free and corrosion protected

· Ready to install

Select to compare

Configure now
Starting from^∗ ：	63.66 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow block bearing pedestal bearing, stainless steel (24241)

NORELEM

Select to compare

Configure now
Starting from^∗ ：	73.29 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow block bearing flange bearing, UCFL, grey cast iron (24215)

NORELEM

· With a sealed, single-row ball bearing

· Compensates for misalignments on the shaft

· Internal diameter of the bearings with plus-tolerance

· Maintenance-free

· Ready to install

Select to compare

Configure now
Starting from^∗ ：	16.37 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow block bearing pedestal bearing, UCP, grey cast iron (24200)

NORELEM

· With a sealed, single-row ball bearing

· Compensates for misalignments on the shaft

· Internal diameter of the bearings with plus-tolerance

· Maintenance-free

· Ready to install

Select to compare

Configure now
Starting from^∗ ：	16.37 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

General Structural Use Rolled Steel Pillow

NTN

A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

Select to compare

Configure now
Starting from^∗ ：	162.34 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spherical Graphite Cast Iron Pillow

NTN

A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	17.34 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Lightweight Cast Iron Diamond Flange Shape

NTN

[Features] Lightweight cast iron diamond flange bearing unit. The shape of the inner diameter of the bearing can be selected from cylindrical set screw and cylindrical eccentric collar.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	13.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Lightweight Cast Iron Pillow

NTN

[Features]
· A combination of plummer blocks and a ball bearing.
[Applications]
· Used frequently in transmission equipment and general machinery.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.31 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Cast Iron Diamond Deformation Flange Shape

NTN

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	22.44 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Cast Iron High Center Pillow Unit UCHP

NTN

A high center pillow unit optimal for when the shaft center is a long distance from the base.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	21.60 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Steel Plate Round Flange Shape

NTN

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	11.68 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Cast Iron Pillow Unit UKIP

NIPPON PILLOW BLOCK

Pillow unit for use with heavy loads. The bearing box is thick with high rigidity, making it optimal for heavy load, vibration, and shock applications.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	86.20 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Promotional pricing

Cast Iron Deformed Diamond-Flanged Unit UCFA

NIPPON PILLOW BLOCK

Diamond-flanged unit with angle adjustment capabilities and a single fulcrum at the center. When mounting a bearing unit, fine adjustments can be made to the central support position

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	37.99 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Cast Iron Take-Up Unit, Adapter Type, UKT (Adapter Sold Separately)

NIPPON PILLOW BLOCK

[Features]
· A combination bearing unit that contains a bearing and a bearing box fitted with a slide groove.
· The bearing box can be moved along the slide groove in a radial direction to adjust the support position.
· With cylindrical holes as a general usage condition, this high precision unit can be used for a variety of applications. *Adapter sold separately.
· Please confirm the compatible adapters in our catalog.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	28.09 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Cast Iron Round Flanged Unit with Spigot Joint, Adapter Type, UKFC (Adapter Sold Separately)

NIPPON PILLOW BLOCK

This bearing unit combines a bearing and a bearing box with a round flange and a spigot joint on the mounting surface. *Adapter sold separately. Please confirm the compatible adapters in our catalog.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	28.65 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Cast Iron Square-Flanged Unit With Spigot Joint UCFS

NIPPON PILLOW BLOCK

Bearing unit that combines a bearing with a bearing box with a square flange and a spigot joint on the mounting surface

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	130.94 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Cast Iron Square Flanged Unit, Adapter Type, UKF (Adapter Sold Separately)

NIPPON PILLOW BLOCK

This bearing unit combines a bearing and a bearing box with a square flange. *Adapter sold separately. Please confirm the compatible adapters in our catalog.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	24.60 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Grooved Steel Take-Up Unit UCTU

NIPPON PILLOW BLOCK

This take-up unit features a frame made from grooved steel, and is a unit product combined with an adjustment bolt.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,265.83 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Cartridge-Type Unit UCC

NIPPON PILLOW BLOCK

Bearing unit that combines a bearing and a bearing box with a cylindrical outer diameter surface. The bearing box is a cylinder machined with h7 accuracy, so it can be used embedded in the cylindrical hole of the main body of the machinery.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	382.56 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Cast Iron Flanged Unit UKFS

NIPPON PILLOW BLOCK

Bearing unit that combines a bearing with a square flange and a bearing box with a spigot joint on the mounting surface.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	130.94 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Promotional pricing

Steel Plate Pillow Unit SBPP

NIPPON PILLOW BLOCK

Lightweight pillow unit for light loads made from the combination of a lightweight bearing and a press machined steel plate bearing box.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.06 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type

ASAHI SEIKO

Pillow-type unit UCP200-type bearing box with raised center height.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.54 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type

ASAHI SEIKO

Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.

Select to compare

Configure now
Starting from^∗ ：	14.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, BFL Type

ASAHI SEIKO

The lightest bearing box of the cast iron diamond-flanged unit series, with a simple structure that combines bearings with rubber seals and is suitable for a transmission shaft with a relatively light load and medium to low speed.

Select to compare

Configure now
Starting from^∗ ：	18.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUP

ASAHI SEIKO

The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.

[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

Select to compare

Configure now
Starting from^∗ ：	44.40 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Pillow Unit Silver Series with Set Screws, Cylindrical Hole Shape, KP

ASAHI SEIKO

[Features]
· Although the bearing box is a standard pillow shape, it is smaller and more lightweight than conventional insert bearing units.
· Also, the bearing box is marked with a center mark for easy positioning.
· The fixation method for the bearing box and shaft is the set screw method.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.36 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Bearing, Cylindrical-Bore Type With Set Screws, B Type

ASAHI SEIKO

Both surfaces are sealed with a rubber seal, and the width of the inner and outer rings are narrower than in a UC-type bearing.

Select to compare

Configure now
Starting from^∗ ：	10.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series, MUSP Shape

ASAHI SEIKO

The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well. Environmentally friendly series

[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

Select to compare

Configure now
Starting from^∗ ：	66.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Diamond Flange Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series

ASAHI SEIKO

[Features]
· The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.

Select to compare

Configure now
Starting from^∗ ：	57.25 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Diamond Deformation Flanged Unit

FSBEARING

Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

Select to compare

Configure now
Starting from^∗ ：	10.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Steel Plate Pillow Unit

FSBEARING

Select to compare

Configure now
Starting from^∗ ：	8.70 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flanged bearing housing unit, 4 hole, with centering pilot, with adapter sleeve bearing GS

INA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	67.58 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Housing units GLCTE..-FA125, two-hole, plastic housing, radial insert ball bearing with eccentric locking collar, with Corrotect® coating, P seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	46.65 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Housing units GRA, three / four-bolt flanged housing units, sheet steel, eccentric locking collar, P seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	23.83 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Housing units GRRY..-VA, three / four-bolt flanged housing units, sheet steel, grub screws in inner ring, R seals, with anti-corrosion protection

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	124.37 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Housing units LCJT, two-bolt flanged housing units, cast iron, eccentric locking collar, L seals, for temperatures from -40°C to +180°C

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.74 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Housing units PCF, four-bolt flanged housing units, cast iron, eccentric locking collar, P seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	25.62 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Housing units PCFT, two-bolt flanged housing units, cast iron, eccentric locking collar, P seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	24.32 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Housing units PCFTR, three-bolt flanged housing units, cast iron, eccentric locking collar, P seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	32.09 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Housing units PCJ..-FA125, four-bolt flanged housing units, cast iron, eccentric locking collar, P seals, with anti-corrosion protection

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	46.54 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Housing units PCJT, two-bolt flanged housing units, cast iron, eccentric locking collar, P seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	24.32 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Housing units PCJT..-TV-FA125, two-hole, plastic housing, radial insert ball bearing with eccentric locking collar, with Corrotect® coating, P seals

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	47.65 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Unit, Type
Bearing Unit, Type
Shaft Bore Dia. d(mm)
Unit Body Material
Bearing Inner Dia. Shape
Pillow Type, Category
Rolling Element Material
Surface Treatment

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MAEDLER	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NTN	NTN	NTN	NTN	NTN	NTN	NTN	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	FSBEARING	FSBEARING	INA	INA	INA	INA	INA	INA	INA	INA	INA	INA	INA
Product Series	Flange Bearing Units FF, for Support Side, Black Oxided	Floating bearing unit Type EF, block version, form B, steel (24078)	Insert bearing B, ball-bearing steel (24235)	Pillow block bearing flange bearing, stainless steel (24242)	Pillow block bearing pedestal bearing, stainless steel (24241)	Pillow block bearing flange bearing, UCFL, grey cast iron (24215)	Pillow block bearing pedestal bearing, UCP, grey cast iron (24200)	General Structural Use Rolled Steel Pillow	Spherical Graphite Cast Iron Pillow	Lightweight Cast Iron Diamond Flange Shape	Lightweight Cast Iron Pillow	Cast Iron Diamond Deformation Flange Shape	Cast Iron High Center Pillow Unit UCHP	Steel Plate Round Flange Shape	Cast Iron Pillow Unit UKIP	Cast Iron Deformed Diamond-Flanged Unit UCFA	Cast Iron Take-Up Unit, Adapter Type, UKT (Adapter Sold Separately)	Cast Iron Round Flanged Unit with Spigot Joint, Adapter Type, UKFC (Adapter Sold Separately)	Cast Iron Square-Flanged Unit With Spigot Joint UCFS	Cast Iron Square Flanged Unit, Adapter Type, UKF (Adapter Sold Separately)	Grooved Steel Take-Up Unit UCTU	Cartridge-Type Unit UCC	Cast Iron Flanged Unit UKFS	Steel Plate Pillow Unit SBPP	Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type	Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type	Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, BFL Type	Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUP	Pillow Unit Silver Series with Set Screws, Cylindrical Hole Shape, KP	Insert Bearing, Cylindrical-Bore Type With Set Screws, B Type	Pillow Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series, MUSP Shape	Diamond Flange Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series	Diamond Deformation Flanged Unit	Steel Plate Pillow Unit	Flanged bearing housing unit, 4 hole, with centering pilot, with adapter sleeve bearing GS	Housing units GLCTE..-FA125, two-hole, plastic housing, radial insert ball bearing with eccentric locking collar, with Corrotect® coating, P seals	Housing units GRA, three / four-bolt flanged housing units, sheet steel, eccentric locking collar, P seals	Housing units GRRY..-VA, three / four-bolt flanged housing units, sheet steel, grub screws in inner ring, R seals, with anti-corrosion protection	Housing units LCJT, two-bolt flanged housing units, cast iron, eccentric locking collar, L seals, for temperatures from -40°C to +180°C	Housing units PCF, four-bolt flanged housing units, cast iron, eccentric locking collar, P seals	Housing units PCFT, two-bolt flanged housing units, cast iron, eccentric locking collar, P seals	Housing units PCFTR, three-bolt flanged housing units, cast iron, eccentric locking collar, P seals	Housing units PCJ..-FA125, four-bolt flanged housing units, cast iron, eccentric locking collar, P seals, with anti-corrosion protection	Housing units PCJT, two-bolt flanged housing units, cast iron, eccentric locking collar, P seals	Housing units PCJT..-TV-FA125, two-hole, plastic housing, radial insert ball bearing with eccentric locking collar, with Corrotect® coating, P seals
CAD									2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D												3D	3D	3D	3D	3D	3D	3D	3D	3D	3D
Starting from^∗	24.62 € *Unit price with basic configuration Volume Discount	49.27 € *Unit price with basic configuration	12.93 € *Unit price with basic configuration	63.66 € *Unit price with basic configuration	73.29 € *Unit price with basic configuration	16.37 € *Unit price with basic configuration	16.37 € *Unit price with basic configuration	162.34 € *Unit price with basic configuration	17.34 € *Unit price with basic configuration	13.94 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	16.31 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	22.44 € *Unit price with basic configuration Volume Discount	21.60 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	11.68 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	86.20 € *Unit price with basic configuration	37.99 € Special price *Unit price with basic configuration Promotional pricing	28.09 € *Unit price with basic configuration	28.65 € *Unit price with basic configuration	130.94 € *Unit price with basic configuration	24.60 € *Unit price with basic configuration	1,265.83 € *Unit price with basic configuration	382.56 € *Unit price with basic configuration	130.94 € *Unit price with basic configuration	14.06 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	23.54 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.05 € *Unit price with basic configuration	18.39 € *Unit price with basic configuration	44.40 € *Unit price with basic configuration	16.36 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.46 € *Unit price with basic configuration	66.59 € *Unit price with basic configuration	57.25 € *Unit price with basic configuration	10.62 € Special price *Unit price with basic configuration Promotional pricing	8.70 € Special price *Unit price with basic configuration Promotional pricing	67.58 € *Unit price with basic configuration Volume Discount	46.65 € *Unit price with basic configuration Volume Discount	23.83 € *Unit price with basic configuration Volume Discount	124.37 € *Unit price with basic configuration Volume Discount	34.74 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	25.62 € *Unit price with basic configuration Volume Discount	24.32 € *Unit price with basic configuration Volume Discount	32.09 € *Unit price with basic configuration Volume Discount	46.54 € *Unit price with basic configuration Volume Discount	24.32 € *Unit price with basic configuration Volume Discount	47.65 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	5 Days	8 Days	Same day	Same day	5 Days	Same day	Same day	11 Days	Same day	10 Days	9 Days	9 Days	10 Days	12 Days	11 Days	10 Days	Same day	Same day	5 Days	5 Days	5 Days	Same day	5 Days	5 Days	5 Days	Same day	Same day	3 Days	4 Days	3 Days	3 Days	Same day	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days
Unit, Type	Bearing Unit	-	-	-	-	-	-	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Framed Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	-	-	-	-	-	-	-	-	-	-	-
Bearing Unit, Type	Others	-	-	-	-	-	-	Pillow Type	Pillow Type	Diamond-Shaped Flange Type	Pillow Type	Deformed Diamond-Shaped Flange Type	Pillow Type	Round Flange Type	Pillow Type	Deformed Diamond-Shaped Flange Type	Take-Up Type	Round Flange Type	Square Flange Type	Square Flange Type	Take-Up Type	Others	Square Flange Type	Pillow Type	Pillow Type	Pillow Type	Diamond-Shaped Flange Type	Pillow Type	Pillow Type	Others	Pillow Type	Diamond-Shaped Flange Type	Deformed Diamond-Shaped Flange Type	Pillow Type	-	-	-	-	-	-	-	-	-	-	-
Shaft Bore Dia. d(mm)	-	-	-	-	-	-	-	30	20 ～ 45	12 ～ 35	12 ～ 40	15 ～ 50	12 ～ 50	12 ～ 40	35 ～ 125	40	20 ～ 125	20 ～ 90	60 ～ 140	20 ～ 125	70 ～ 90	90 ～ 110	55 ～ 125	12 ～ 30	12 ～ 50	12 ～ 35	20	10 ～ 30	10 ～ 30	20	12 ～ 25	10 ～ 25	20 ～ 55	15 ～ 30	20 ～ 35	20 ～ 30	20 ～ 50	20 ～ 30	20 ～ 50	20 ～ 50	12 ～ 50	15 ～ 50	20 ～ 50	12 ～ 60	20 ～ 50
Unit Body Material	Steel	-	-	-	-	-	-	Structural Steel	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Steel Plate	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Structural Steel	Cast Iron	Cast Iron	Steel Plate	Cast Iron	Steel	Cast Iron	Others	Others	Cast Iron	-	-	Cast Iron	Steel Plate	-	-	-	-	-	-	-	-	-	-	-
Bearing Inner Dia. Shape	-	-	-	-	-	-	-	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw / Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Taper Hole, Adapter	Cylindrical Hole, Set Screw	Taper Hole, Adapter	-	Cylindrical Hole, Set Screw	Taper Hole, Adapter	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Taper Hole, Adapter	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Set Screw	Cylindrical Hole, Eccentric Collar	-	-	-	-	-	-	-	-	-	-	-
Pillow Type, Category	-	-	-	-	-	-	-	Standard	Standard	-	Lightweight	-	High Center	-	Thick	-	-	-	-	-	-	-	-	Standard	High Center	Standard	Standard	Lightweight	Standard	Standard	Standard	Standard	-	Lightweight	-	-	-	-	-	-	-	-	-	-	-
Rolling Element Material	-	-	-	-	-	-	-	-	-	Steel	Steel	-	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel	Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	-	-	Steel	Steel	-	-	-	-	-	-	-	-	-	-	-
Surface Treatment	-	-	-	-	-	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	Not Provided	Not Provided	-	-	-	-	-	-	-	-	-	-	-