Bearing Covers, Seals（Page 2）

276

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

Piston Seal, 72NBR708, KDN

FREUDENBERG

[Specifications]
・Material: NBR
・Internal diameter(mm): 5.1~113.3
・External diameter(mm): 12~125

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.68 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Seal Set for Hydraulic Nuts HYDNUT..-E and HYDNUT..-E-INCH

FAG

Seal set for hydraulic nuts HYDNUT..-E and HYDNUT..-E-INCH

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	137.86 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Housing seals DS Series / Double lip seal / SC...DS

SNR

[Specifications]
・Version: Double lip seal

DS Series of Housing seals from SNR.

Select to compare

Configure now
Starting from^∗ ：	3.48 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

SKF Felt Seal for Pedestal Bearing Housing

SKF

[Specifications]
・Shaft tolerance class: h9

[Features]
・Felt seals provide a simple and effective sealing solution
・They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal
・Felt seals do not limit axial movements of the shaft
・Easy to install
・Cost-effective
・Suitable for relatively high shaft speeds

Select to compare

Configure now
Starting from^∗ ：	15.34 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SKF Four-Lip Seal for Pedestal Bearing Housing

SKF

[Specifications]
・Engineering material: thermoplastic elastomer
・eClass code: 23-05-17-90

SKF housing seals are the first barrier against contamination. The four-lip seals replace the former double-lip seals. The four-lip seals are more effective than the double-lip and generate less friction, which enables higher shaft speeds. For highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.

[Features]
・Good protection from contamination
・Keep the lubricant in the housing
・Part of three barrier solution

Select to compare

Configure now
Starting from^∗ ：	11.91 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SKF End Cover for Pillow Block Unit

SKF

[Specifications]
・Engineering material: Nitrile rubber/Steel
・eClass code: 23-05-17-90

End covers can be used at the end of shafts instead of seals. These end covers are made of polypropylene and designed for SNL bearing housings in sizes 05 to 32. They have good resistance to most chemicals and can withstand operating temperatures up to 110 °C (230 °F). End covers are easy to install and cost-effective accessories.

[Features]
・Good chemical resistance
・Designed for temperatures up to 110 °C (230 °F)
・Easy to install
・Cost-effective

Select to compare

Configure now
Starting from^∗ ：	5.23 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

NILOS Ring AVG

NILOS RING

[Specifications]
・Type: NILOS ring
・Outside diameter D(mm): 31.8-90.8
・Internal diameter d(mm): 12-45
・Engineering material: Zinc-plated special strip steel

NILOS-Rings for Single Row Angular Contact Ball Bearings, AVG series.

Select to compare

Configure now
Min. Shipping Days ：	5 Days

KASK, Bearing End Cap for Housing Units

INA

[Specifications]
・Outer Diameter(mm): 47.8~111.1

The caps are suitable for temperatures from –20 °C to +80 ℃. They protect against injury due to rotating shafts and also protect the bearings against contamination.
The housings correspond predominantly to DIN 626-2 and IS0 3228.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.50 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Sealing Ring, Single Lipped

SKF

[Specifications]
・Internal diameter(mm): 8-70
・Outer diameter(mm): 12-78
・Width(mm): 3, 4, 5
・Material: NBR

Radial shaft seal with low cross-sectional height for needle roller bearings, G design.

[Features]
・Low cross-sectional height
・Retain the lubricant
・Exclude contaminants

Select to compare

Configure now
Starting from^∗ ：	3.39 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Complete Piston, 72NBR

FREUDENBERG

[Specifications]
・Material: NBR
・Internal diameter(mm): 4~20
・External diameter(mm): 16~125

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.87 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Cushion Seal, 90NBR108

FREUDENBERG

[Specifications]
・Material: NBR
・Internal diameter(mm): 25~50
・External diameter(mm): 33~60

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.33 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

Guide Band, PTFE-bronze, Material 177024

FREUDENBERG

[Specifications]
・Material: PTFE-bronze
・Groove length(mm): 8.2
・Width(mm): 8

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.93 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

Simmerring, 75FKM595

FREUDENBERG

[Specifications]
・Material: FKM
・Internal diameter(mm): 10~390
・External diameter(mm): 22~430

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.02 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Simmerring, PTFE 10 / F56101

FREUDENBERG

[Specifications]
・Material: PTFE
・Internal diameter(mm): 10-125
・External diameter(mm): 22-150
・Width(mm): 7-15

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	65.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Bearing Covers / Round Flange

MISUMI

[Features] As an outer ring holder for bearings or dust and waterproof protection.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.40 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Oil seal B1 Series / NBR (Perbunan) / Metal coating / Internal diameter 8~280mm / Outer diameter 16~320mm

DICHTOMATIK

[Specifications]
・Material: NBR (Perbunan)
・Version: Metal coating
・Pressure resistance: Up to 0.5 bar max.

Select to compare

Configure now
Min. Shipping Days ：	4 Days

V-ring A VIT Series / Internal diameter 2.5~270mm

DICHTOMATIK

[Specifications]
・Internal diameter(mm): 2.5~270
・Width(mm): 2.1~14.3

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Housing seals FS Series / Felt seal / SC…FS

SNR

[Specifications]
・Version: Felt seal

FS Series of Housing seals from SNR.

Select to compare

Configure now
Min. Shipping Days ：	4 Days

NILOS-Ring for Single Row Deep Groove Ball Bearings and Tapered Roller Bearings / Width 2.5-5.4mm

NILOS RING

[Specifications]
・Internal diameter(mm): 25-50
・Outer diameter(mm): 43.7-87.5
・Width(mm): 2.5-5.4

A NILOS-Ring that seals the outer roller bearing ring is described a type “AV” , for example, An “externally-sealing” NILOS-Ring for a single-row 302 05 taper roller bearing is described as a type “302 05 AV”.

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Oil seal BA Series / NBR (Perbunan) / Rubber coating / Internal diameter 10mm / Outer diameter 18mm

DICHTOMATIK

[Specifications]
・Material: NBR (Perbunan)
・Version: Rubber coating
・Pressure resistance: Up to 0.5 bar max.
・Internal diameter(mm): 10
・Outer diameter(mm): 18
・Width(mm): 4

Select to compare

Configure now
Starting from^∗ ：	3.33 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Distance washers / Internal diameter 35, 45mm

SKF

[Specifications]
・Internal diameter(mm): 35, 45
・Outer diameter(mm): 42, 55
・eClass code: 23-05-17-90

SKF spacing washers of the ZW-type enable open bearings with Z-type sealing washers on both sides to be relubricated. Using a set of spacing washers enables a free passage for fresh grease. The set consists of two washers – one to be mounted in the housing bore and one to be mounted on the shaft. These housing and shaft washers are ordered separately.

[Features]
・Cost-effective
・Enable relubrication of bearings with Z-type sealing washers

Select to compare

Configure now
Starting from^∗ ：	1.87 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

NILOS Spacer Ring J

NILOS RING

[Specifications]
・Type: NILOS spacer ring
・Outside diameter D(mm): 42-100
・Internal diameter d(mm): 29-77
・Engineering material: Zinc die-casting

NILOS-Spacer-Rings type J.

[Features]
・When using locking rings, the type of design with NILOS-Spacer-Rings is especially recommended when installing NILOS-Rings
・NILOS-Spacer-Rings are matched for optimum clamping by means of Seeger L-rings to compensate for axial play
・Trouble-free installation
・The material is a form of die-cast zinc. The usable temperature range under heavy loading is 100 °C max

Select to compare

Configure now
Min. Shipping Days ：	5 Days

NILOS ring LST-L

NILOS RING

[Specifications]
・Type: NILOS ring
・Outside diameter D(mm): 68
・Internal diameter d(mm): 40
・Engineering material: Zinc-plated special strip steel

The LST-L ring is a further development of the NILOS LSTO ring, which has been tried and tested in practice as a non-contact, grease-packed labyrinth seal.

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Sealing Strip

SKF

[Specifications]
・Width(mm):6, 8
・Length(mm): 190, 260
・eClass code: 23-05-17-90

Felt strips, and their high-temperature variants made of aluminium borosilicate, provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt strip and the shaft, transforming the seal into a non-contact, gap-type seal. Felt strips should be cut to the correct length and soaked in hot oil prior to being installed.

[Features]
・Cost-effective
・Suitable for relatively high shaft speeds

Select to compare

Configure now
Starting from^∗ ：	16.22 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Guide Band, PTFE-bronze, MT26

FREUDENBERG

[Specifications]
・Material: PTFE-bronze
・Groove length(mm): 9.7
・Width(mm): 9.6

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	319.55 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Guide Ring, Piston, Polyamide-PA 4112

FREUDENBERG

[Specifications]
・Material: Polyamide
・Internal diameter(mm): 21.9~155
・External diameter(mm): 25~160

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.07 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Guide Ring, Rod, Polyamide PA 4112

FREUDENBERG

[Specifications]
・Material: Polyamide
・Internal diameter(mm): 20~40
・External diameter(mm): 23.1~45

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.43 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Housing seals S Series / Internal diameter 90mm

SKF

[Specifications]
・Internal diameter(mm): 90
・Outer diameter(mm): 165
・eClass code: 23-05-17-90

SNL housing seals are the first barrier against contamination. For applications where there are high speeds or extreme temperatures, SKF recommends using labyrinth seals, and for highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.

[Features]
・Good protection from contamination
・Keep the lubricant in the housing
・Part of the three barrier solution

Select to compare

Configure now
Starting from^∗ ：	443.22 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Housing seals / Internal diameter 10~380mm

SKF

[Specifications]
・Internal diameter(mm): 10~380
・Outer diameter(mm): 26~415
・Version(g): Labyrinth seal, Sealing lamellas
・eClass code: 23-05-17-90

Select to compare

Configure now
Starting from^∗ ：	1.78 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Housing seals A Series / Internal diameter 20~175mm

SKF

[Specifications]
・Internal diameter(mm): 20~175
・Outer diameter(mm): 41.5~215.5
・Version(g): V-Ring seal
・eClass code: 23-05-17-90

V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments. They are a cost-effective and easy to install contaminant barrier for all kind of shafts.

[Features]
・Easy to install
・Many variants
・Cost-effective

Select to compare

Configure now
Starting from^∗ ：	18.93 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Oil seal B2SL Series / NBR (Perbunan) / Metal coating / Internal diameter 95~160mm / Outer diameter 120~190mm

DICHTOMATIK

[Specifications]
・Material: NBR (Perbunan)
・Version: Metal coating
・Pressure resistance: Up to 0.5 bar max.
・Internal diameter(mm): 95~160
・Outer diameter(mm): 120~190
・Width(mm): 13, 15

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Oil seal VIT Series / FKM (Viton) / Rubber coating / Internal diameter 6~170mm / Outer diameter 16~200mm

DICHTOMATIK

[Specifications]
・Material: FKM (Viton)
・Version: Rubber coating
・Up to 0.5 bar max.
・Internal diameter(mm): 6~170
・Outer diameter(mm): 16~200
・Width(mm): 4~15

Select to compare

Configure now
Min. Shipping Days ：	4 Days

V-ring L Series / Internal diameter 99~450mm

DICHTOMATIK

[Specifications]
・Internal diameter(mm): 99~450
・Width(mm): 7.9, 9, 14.3

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Housing seals FSS Series / Felt seal / SC...FSS

SNR

[Specifications]
・Version: Felt seal

FSS Series of Housing seals from SNR.

Select to compare

Configure now
Starting from^∗ ：	12.37 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Housing seals LA Series / Labyrinth seal

SNR

[Specifications]
・Version: Labyrinth seal

LA Series of Housing seals from SNR.

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Housing seals FSS Series / Felt seal / SC210 FSS

SNR

[Specifications]
・Version: Labyrinth seal

SC205 LA of Housing seals from SNR.

Select to compare

Configure now
Starting from^∗ ：	72.52 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

NILOS-Ring for Single Row Taper Roller Bearings 32006 XAV / Width 4.5mm

NILOS RING

[Specifications]
・Internal diameter(mm): 30
・Outer diameter(mm): 53.8
・Width(mm): 4.5

Select to compare

Configure now
Starting from^∗ ：	3.58 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Oil seal B2 Series / NBR (Perbunan) / Metal coating / Internal diameter 25~160mm / Outer diameter 40~190mm

DICHTOMATIK

[Specifications]
・Material: NBR (Perbunan)
・Version: Metal coating
・Pressure resistance: Up to 0.5 bar max.
・Internal diameter(mm): 25~160
・Outer diameter(mm): 40~190

Select to compare

Configure now
Starting from^∗ ：	5.33 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Oil seal BAOF Series / NBR (Perbunan) / Rubber coating / Internal diameter 6~50mm / Outer diameter 10~62mm

DICHTOMATIK

[Specifications]
・Material: NBR (Perbunan)
・Version: Rubber coating
・Up to 0.5 bar max.
・Internal diameter(mm): 6~50
・Outer diameter(mm): 10~62

Select to compare

Configure now
Starting from^∗ ：	3.10 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bearing Covers, Seals EC Series

SNR

[Specifications]
・Version: Housing cover

EC Series of Bearing Covers, Seals from SNR.

Select to compare

Configure now
Starting from^∗ ：	5.13 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

NILOS Ring JVG

NILOS RING

[Specifications]
・Type: NILOS ring
・Outside diameter D(mm): 47-130
・Internal diameter d(mm): 23.2-81
・Engineering material: Zinc-plated special strip steel

NILOS-Rings for Single Row Angular Contact Ball Bearings, JVG series.

Select to compare

Configure now
Min. Shipping Days ：	5 Days

NILOS Ring JVH

NILOS RING

[Specifications]
・Type: NILOS ring
・Outside diameter D(mm): 47-140
・Internal diameter d(mm): 25.7-92
・Engineering material: Zinc-plated special strip steel

NILOS-Rings for Single Row Angular Contact Ball Bearings, JVH series.

Select to compare

Configure now
Min. Shipping Days ：	5 Days

NILOS Ring ZAV

NILOS RING

[Specifications]
・Type: NILOS ring
・Outside diameter D(mm): 17.8-110.5
・Internal diameter d(mm): 6-65
・Engineering material: Chromium-nickel, Zinc-plated special strip steel

NILOS-Rings for Single Row Deep Groove Ball Bearings, ZAV series.

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Labyrinth Seal, split

FAG

[Specifications]
・Inner Diameter(mm): 184.3~274.4

Labyrinth seal, split.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	624.25 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taconite Seal NTS.., for Split Plummer Block Housings SNS, Material: Steel, FKM

FAG

[Specifications]
・Material: Steel, FKM
・Inner Diameter(mm): 35.4~434.4
・Outer Diameter(mm): 184.3~434.4

Labyrinth seal, unsplit.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	111.63 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	FREUDENBERG	FAG	SNR	SKF	SKF	SKF	NILOS RING	INA	SKF	FREUDENBERG	FREUDENBERG	FREUDENBERG	FREUDENBERG	FREUDENBERG	MISUMI	DICHTOMATIK	DICHTOMATIK	SNR	NILOS RING	DICHTOMATIK	SKF	NILOS RING	NILOS RING	SKF	FREUDENBERG	FREUDENBERG	FREUDENBERG	SKF	SKF	SKF	DICHTOMATIK	DICHTOMATIK	DICHTOMATIK	SNR	SNR	SNR	NILOS RING	DICHTOMATIK	DICHTOMATIK	SNR	NILOS RING	NILOS RING	NILOS RING	FAG	FAG
Product Series	Piston Seal, 72NBR708, KDN	Seal Set for Hydraulic Nuts HYDNUT..-E and HYDNUT..-E-INCH	Housing seals DS Series / Double lip seal / SC...DS	SKF Felt Seal for Pedestal Bearing Housing	SKF Four-Lip Seal for Pedestal Bearing Housing	SKF End Cover for Pillow Block Unit	NILOS Ring AVG	KASK, Bearing End Cap for Housing Units	Sealing Ring, Single Lipped	Complete Piston, 72NBR	Cushion Seal, 90NBR108	Guide Band, PTFE-bronze, Material 177024	Simmerring, 75FKM595	Simmerring, PTFE 10 / F56101	Bearing Covers / Round Flange	Oil seal B1 Series / NBR (Perbunan) / Metal coating / Internal diameter 8~280mm / Outer diameter 16~320mm	V-ring A VIT Series / Internal diameter 2.5~270mm	Housing seals FS Series / Felt seal / SC…FS	NILOS-Ring for Single Row Deep Groove Ball Bearings and Tapered Roller Bearings / Width 2.5-5.4mm	Oil seal BA Series / NBR (Perbunan) / Rubber coating / Internal diameter 10mm / Outer diameter 18mm	Distance washers / Internal diameter 35, 45mm	NILOS Spacer Ring J	NILOS ring LST-L	Sealing Strip	Guide Band, PTFE-bronze, MT26	Guide Ring, Piston, Polyamide-PA 4112	Guide Ring, Rod, Polyamide PA 4112	Housing seals S Series / Internal diameter 90mm	Housing seals / Internal diameter 10~380mm	Housing seals A Series / Internal diameter 20~175mm	Oil seal B2SL Series / NBR (Perbunan) / Metal coating / Internal diameter 95~160mm / Outer diameter 120~190mm	Oil seal VIT Series / FKM (Viton) / Rubber coating / Internal diameter 6~170mm / Outer diameter 16~200mm	V-ring L Series / Internal diameter 99~450mm	Housing seals FSS Series / Felt seal / SC...FSS	Housing seals LA Series / Labyrinth seal	Housing seals FSS Series / Felt seal / SC210 FSS	NILOS-Ring for Single Row Taper Roller Bearings 32006 XAV / Width 4.5mm	Oil seal B2 Series / NBR (Perbunan) / Metal coating / Internal diameter 25~160mm / Outer diameter 40~190mm	Oil seal BAOF Series / NBR (Perbunan) / Rubber coating / Internal diameter 6~50mm / Outer diameter 10~62mm	Bearing Covers, Seals EC Series	NILOS Ring JVG	NILOS Ring JVH	NILOS Ring ZAV	Labyrinth Seal, split	Taconite Seal NTS.., for Split Plummer Block Housings SNS, Material: Steel, FKM
CAD															2D / 3D
Starting from^∗	11.68 € *Unit price with basic configuration Volume Discount	137.86 € *Unit price with basic configuration Volume Discount	3.48 € *Unit price with basic configuration	15.34 € *Unit price with basic configuration	11.91 € *Unit price with basic configuration	5.23 € *Unit price with basic configuration	-	2.50 € *Unit price with basic configuration Volume Discount	3.39 € *Unit price with basic configuration	27.87 € *Unit price with basic configuration Volume Discount	13.33 € *Unit price with basic configuration Volume Discount	38.93 € *Unit price with basic configuration Volume Discount	12.02 € *Unit price with basic configuration Volume Discount	65.32 € *Unit price with basic configuration Volume Discount	16.40 € *Unit price with basic configuration Volume Discount	-	-	-	-	3.33 € *Unit price with basic configuration	1.87 € *Unit price with basic configuration	-	-	16.22 € *Unit price with basic configuration	319.55 € *Unit price with basic configuration Volume Discount	2.07 € *Unit price with basic configuration Volume Discount	5.43 € *Unit price with basic configuration Volume Discount	443.22 € *Unit price with basic configuration	1.78 € *Unit price with basic configuration	18.93 € *Unit price with basic configuration	-	-	-	12.37 € *Unit price with basic configuration	-	72.52 € *Unit price with basic configuration	3.58 € *Unit price with basic configuration	5.33 € *Unit price with basic configuration	3.10 € *Unit price with basic configuration	5.13 € *Unit price with basic configuration	-	-	-	624.25 € *Unit price with basic configuration Volume Discount	111.63 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	7 Days	4 Days	4 Days	5 Days	5 Days	5 Days	5 Days	3 Days	12 Days	7 Days	17 Days	17 Days	7 Days	7 Days	7 Days	4 Days	4 Days	4 Days	4 Days	4 Days	17 Days	5 Days	5 Days	12 Days	12 Days	7 Days	7 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	5 Days	5 Days	5 Days	4 Days	3 Days