Universal Joints（Body Material：Stainless Steel）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Join Slide SPSS Series
MIYOSHI KIKAI
SPSS (spline shaft), SPAS / SPOS (spline sleeve) is made of: S-45C material.
[Features]
· Please note the effective spline size for sleeve and shaft cutting.
· Use on the sliding part during rotation.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 85.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Universal joints with friction bearing, Stainless Steel
GANTER
Since the moveable parts are not surface treated, i.e. not case hardened, the possibilities of application of these universal joints are much more limited compared to the ones made of standard steel. Therefore, the guide lines for the selection of universal joints with friction bearing according to the diagram may be applied at a limited extent only. Rotational speeds over 200 min may become critical.
For continuous use of the Stainless Steel-Universal joints, ample lubrication is very important. This achieved by fitting the joint with a grease filled gaiter GN 808.1.
The order example refers to universal joints with equal bores both ends d2 and s.- Volume Discount
Configure nowStarting from∗ ： 109.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Joint Stainless Steel Type with Spline Shaft HS-P Series
MIYOSHI KIKAI
[Features] Rotation and sliding can be transmitted simultaneously. [Material] EN 1.4301 Equiv. (sintered).- Volume Discount
Configure nowStarting from∗ ： 315.23 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 182.21 € Min. Shipping Days ： 20 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 341.53 € Min. Shipping Days ： 20 Days *Unit price with basic configuration
-
Cardan single joints, stainless steel, with plain bearing, similar to DIN 808 (23403-01)
NORELEM
· Stainless steel 1.4301
· Max. operating angle 45°
· High wear resistance, long service lifeConfigure nowStarting from∗ ： 50.54 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Standard Type Corrosion Resistant HS Series / BS Series / HSS Series
MIYOSHI KIKAI
[Features]
· Dry lubrication treatment for wear resistance (HS-16 and higher)
· Holes for the spring pins and taper pins included can be machined in the l/2 position simultaneously with the shaft.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not attached.- Volume Discount
Configure nowStarting from∗ ： 64.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Standard Type Corrosion Resistant Type HSD Series / BSD Series
MIYOSHI KIKAI
[Features]
· Dry lubrication treatment for wear resistance (HSD-16 and higher)
· Holes for the spring pins and taper pins included can be machined in the l/2 position simultaneously with the shaft.
· When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.- Volume Discount
Configure nowStarting from∗ ： 88.94 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Standard Type Miniature Type mm Series
MIYOSHI KIKAI
High precision for ultra-small diameter use. 3 types of material available: SK-4 with nitriding composite treatment, SUS304 & SUS316.- Volume Discount
Configure nowStarting from∗ ： 89.56 € Special price Min. Shipping Days ： 18 Days *Unit price with basic configuration
-
Cardan double joints, stainless steel, with plain bearing, similar to DIN 808 (23404-01)
NORELEM
· Stainless steel 1.4301
· Max. deflection angle 90°
· High wear resistance, long service lifeConfigure nowStarting from∗ ： 95.50 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Allowable Torque Range(N•m) |
| Shaft Bore Dia. (machined) D1(Ø) |
| Shaft Bore Dia. (machined) D2(Ø) |
| Outer Dia. A(Ø) |
| Overall Length W(mm) |
| Max. Rotational Speed Range(r/min) |
| Feature |
| Body Material |
| Application |
| Allowable Torque(N•m) |
| Max. Rotational Speed(r/min) |
| Allowable Lateral Misalignment Range(mm) |
| Allowable Lateral Misalignment(mm) |
| Allowable Angular Misalignment(deg) |
|
|
|
|
|
|
|
|
|
| |
| Brand | MIYOSHI KIKAI | GANTER | MIYOSHI KIKAI | MIGHTY | MIGHTY | NORELEM | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | NORELEM |
| Product Series | Cardan single joints, stainless steel, with plain bearing, similar to DIN 808 (23403-01) | Standard Type Corrosion Resistant HS Series / BS Series / HSS Series | Standard Type Corrosion Resistant Type HSD Series / BSD Series | Cardan double joints, stainless steel, with plain bearing, similar to DIN 808 (23404-01) | ||||||
| CAD |
| |||||||||
| Starting from∗ | 85.84 € *Unit price with basic configuration Volume Discount | 109.96 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 315.23 € *Unit price with basic configuration Volume Discount | 182.21 € *Unit price with basic configuration Volume Discount | 341.53 € *Unit price with basic configuration Volume Discount | 50.54 € *Unit price with basic configuration | 64.39 € *Unit price with basic configuration Volume Discount | 88.94 € *Unit price with basic configuration Volume Discount | 89.56 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 95.50 € *Unit price with basic configuration |
| Min. Shipping Days | 8 Days | Same day | 11 Days | 20 Days | 20 Days | 4 Days | 5 Days | 8 Days | 18 Days | 4 Days |
| Type | Shaft Type | - | Shaft Type | Standard Type | Standard Type | - | Standard Type | Standard Type | Standard Type | - |
| Allowable Torque Range(N•m) | - | - | - | 0.05 to 1.00 ～ 5.01 to 10.00 | 0.05 to 1.00 ～ 5.01 to 10.00 | - | - | - | - | - |
| Shaft Bore Dia. (machined) D1(Ø) | 6 ～ 25 | 6 ～ 25 | 6 ～ 20 | 2.5 ～ 14 | 2.5 ～ 14 | 16 ～ 50 | 6 ～ 60 | 6 ～ 30 | 1 | 16 ～ 50 |
| Shaft Bore Dia. (machined) D2(Ø) | - | - | - | - | - | - | - | - | - | - |
| Outer Dia. A(Ø) | 6 ～ 22 | 16 ～ 50 | 12.5 ～ 40 | 5.6 ～ 47.8 | 5.6 ～ 47.8 | - | 12.5 ～ 120 | 12.5 ～ 60 | 2 | - |
| Overall Length W(mm) | - | - | 148.5~252 ～ 335~842 | 25.4 ～ 66.6 | 38.1 ～ 130 | 34 ～ 108 | 40 ～ 300 | 65 ～ 275 | 9 | 56 ～ 163 |
| Max. Rotational Speed Range(r/min) | - | - | - | - | - | - | Less Than 100 ～ 301 to 1,000 | 100 to 300 ～ 301 to 1,000 | - | - |
| Feature | - | - | - | High Accuracy ～ No Backlash | High Accuracy ～ No Backlash | - | - | - | Small | - |
| Body Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Application | Standard | - | Standard | Standard / Servo Motor / Stepping Motor / Encoder | Standard / Servo Motor / Stepping Motor / Encoder | - | Standard | Standard | Standard | - |
| Allowable Torque(N•m) | - | - | - | 0.11 ～ 8.5 | 0.11 ～ 8.5 | - | - | - | - | - |
| Max. Rotational Speed(r/min) | - | - | - | - | - | - | 90 ～ 800 | 150 ～ 640 | - | - |
| Allowable Lateral Misalignment Range(mm) | - | - | - | - | - | - | - | - | - | - |
| Allowable Lateral Misalignment(mm) | - | - | - | - | - | - | - | - | - | - |
| Allowable Angular Misalignment(deg) | - | - | - | 20 ～ 30 | 20 ～ 30 | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Allowable Torque Range(N•m)
-
Shaft Bore Dia. (machined) D1(Ø)
-
Shaft Bore Dia. (machined) D2(Ø)
-
Outer Dia. A(Ø)
-
Overall Length W(mm)
- 9
- 12
- 15
- 16
- 18
- 19.1
- 19.4
- 20
- 22.2
- 23.4
- 24
- 24.2
- 25.4
- 26.4
- 27
- 27.2
- 28
- 28.5
- 30
- 30.4
- 31
- 32
- 33.4
- 34
- 34.9
- 35
- 35.3
- 35.6
- 36
- 37.6
- 38.1
- 39
- 40
- 41.4
- 41.7
- 42
- 43
- 44
- 44.5
- 45
- 45.6
- 46.2
- 48
- 49.5
- 50
- 50.8
- 50.9
- 51
- 51.4
- 52
- 52.4
- 53.3
- 54
- 54.1
- 56
- 58
- 59
- 60
- 61.2
- 62
- 62.1
- 63.5
- 64
- 65
- 66.6
- 67.5
- 67.6
- 68
- 69.7
- 70
- 71
- 72
- 73
- 73.2
- 74
- 75
- 75.5
- 76
- 76.2
- 80
- 81
- 82
- 83
- 84
- 86
- 87
- 88
- 89.8
- 90
- 92
- 94
- 94.5
- 95
- 96
- 98.6
- 100
- 102
- 104
- 105
- 105~232
- 108
- 112
- 117.5
- 120
- 122
- 122~237
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 130.5~238
- 131~250
- 132
- 132~245
- 134
- 136~269
- 136.5~244
- 139
- 140
- 143
- 144
- 144~275
- 145
- 147.5~402
- 148.5~252
- 149
- 150
- 153
- 155.5~409
- 156
- 158
- 160
- 162~270
- 163
- 163~265
- 164
- 164~283
- 165
- 167
- 168
- 168~287
- 168.5~266.5
- 175
- 175.5~423.5
- 176~297
- 178
- 179~418
- 180
- 180~277
- 180.5~423.5
- 182
- 185~423
- 187.5~433
- 188
- 190
- 192
- 192~360
- 194~309
- 195
- 198~366
- 200
- 206
- 207~440
- 212
- 212~321
- 212~440
- 219~373
- 219~450
- 220
- 220~547
- 224~325
- 224~551
- 228
- 230
- 231~458
- 233~331
- 238
- 241~391
- 242~561
- 244~404
- 248
- 248~567
- 250
- 257~575
- 259~403
- 260
- 262~580
- 264~351
- 265~577
- 268~584.5
- 269~422
- 270
- 270~444
- 275
- 283~593
- 284~454
- 288~599
- 290
- 294~794
- 295~602
- 298
- 299~436
- 300
- 305~535
- 307~533
- 310
- 312~808.5
- 316~480
- 318~621.5
- 319~811
- 324~806
- 326
- 329~819
- 330~451
- 335~842
- 340
- 340~1018
- 343~638.5
- 345~575
- 349~581
- 350
- 353~1036
- 355~842
- 355~1040
- 360~1034
- 380~500
- 383~528
- 388~528
- 390
- 395~1065
- 397~599
- 399~599
- 399~617
- 401~1072
- 403~878
- 403~880.5
- 407~605
- 420
- 425~1094
- 426
- 434~645
- 437~1101
- 441~645
- 444~1094
- 444~1095
- 458~1095
- 465~1122
- 465~1125.5
- 485
- 517~685
- 520~1136
- 530~1164
- 546~711
- 553~711
- 556~1185
- 556~1188.5
- 588~1182
- 650~1223
- 690~1255
- 760~1312
-
Max. Rotational Speed Range(r/min)
-
Feature
-
Body Material
-
Application
-
Allowable Torque(N•m)
-
Max. Rotational Speed(r/min)
-
Allowable Lateral Misalignment Range(mm)
-
Allowable Lateral Misalignment(mm)
-
Allowable Angular Misalignment(deg)
Brand
-
- MISUMI (0)
- MIYOSHI KIKAI (5)
- NORELEM (2)
- MIGHTY (2)
- GANTER (1)
- SHOWA SPRING (0)
- MIKI PULLEY (0)
- SUNGIL (0)
- REYHER (0)
- SAKAI MANUFACTURING (0)
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Universal Joints
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.