Toothed Belt Pulleys / Timing Pulleys / Idlers（Page 3）

Filter products by: Type

155

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Timing belt pulleys / S5M / flanged pulley selectable / configurable / aluminium / anodised / S5M0100

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	21.73 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / 3M / with flanged pulley / aluminium / SGS

CONCAR

[Specifications]
・Material: Aluminum
・Division(mm): 3

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 3M / with flanged pulley / SGS

Select to compare

Configure now
Starting from^∗ ：	6.91 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / 5M / with flanged pulley / aluminium, steel / SGT

CONCAR

[Specifications]
・Division(mm): 5

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 5M / with flanged pulley / aluminium, steel / SGT

Select to compare

Configure now
Starting from^∗ ：	7.26 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / 3M / with flanged pulley / steel, grey cast iron / SGU

CONCAR

[Specifications]
・Division(mm): 8

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 3M / with flanged pulley / steel, grey cast iron / SGU

Select to compare

Configure now
Starting from^∗ ：	14.54 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / T10 / with flanged pulley / aluminium / SGI

CONCAR

[Specifications]
・Material: Aluminum
・Division(mm): 10

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / T10 / with flanged pulley / SGI

Select to compare

Configure now
Starting from^∗ ：	11.98 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys for TaperLock / 14M / steel, cast iron / PCGT

CONCAR

[Specifications]
・Division(mm): 14

Poly Chain GT2 runs in special Poly Chain GT timing belt pulleys.
Timing belt pulleys for TaperLock / 14M / steel, cast iron / PCGT

Select to compare

Configure now
Starting from^∗ ：	174.34 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / MXL / with flanged pulley / aluminium / SGA

CONCAR

[Specifications]
・Material: Aluminum
・Belt Width Used(mm): 6.35
・Division(mm): 2.032

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / MXL / with flanged pulley / SGA

Select to compare

Configure now
Starting from^∗ ：	11.98 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Toothed pulleys profile HTD 5M, for 25 mm wide belts (22004)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

Select to compare

Configure now
Starting from^∗ ：	9.77 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulley profile HTD 3M, Form G (22004)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

· Low noise and maintenance

Select to compare

Configure now
Starting from^∗ ：	17.35 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Timing belt pulleys with keyless bushings / H / flanged pulley deselectable / aluminium, steel / HPL

MISUMI

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	101.81 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Tensioner Idlers / toothed / H, L / flanged pulley selectable / single bearing, double bearing / aluminium, steel

MISUMI

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Promotional pricing

Flanged wheels for KATAYAMA / MXL, XL, L, S2M, S3M, S5M, T5, T10 / aluminium / KTA

Flanged wheels for KATAYAMA / MXL, XL, L, S2M, S3M, S5M, T5, T10 / aluminium / KTA【1-2 Pieces Per Package】

KATAYAMA CHAIN

KANA timing pulley flange is a K timing pulley accessory part, but only the flange is available for sale.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.00 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Timing belt pulleys / S5M / with flanged pulley / steel / S5M100, S5M150, S5M250

KATAYAMA CHAIN

KANA timing pulley demonstrates superior performance of timing transmission with low noise and clean transmission levels. Use in combination with a timing belt.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	12.78 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Tensioner Idlers / profile selectable / with flanged pulley / single bearing, double bearing / steel / TPI

KONISHI MFG

Set bearing for timing pulley, uses 6004ZZ bearing (internal diameter 20 mm).

[Features]
· Idler for the timing belt.
· Please use in the tensioner according to the belt size

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	74.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Timing belt pulleys / L / flanged pulley selectable / steel

UNITTA

Pulley for L-type belts

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	26.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Timing belt pulleys / H / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / H200

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	133.34 €
Min. Shipping Days ：	14 Days

*Unit price with basic configuration

Timing belt pulleys / S5M / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / S5M0250

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	27.39 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / 14M / with flanged pulley / steel, grey cast iron / SGV

CONCAR

[Specifications]
・Division(mm): 14

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 14M / with flanged pulley / steel, grey cast iron / SGV

Select to compare

Configure now
Starting from^∗ ：	64.34 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / T5 / with flanged pulley / aluminium / SGH

CONCAR

[Specifications]
・Material: Aluminum
・Division(mm): 5

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / T5 / with flanged pulley / SGH

Select to compare

Configure now
Starting from^∗ ：	8.00 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Distance Bushes for Tensioning Rollers / Idlers TS

MAEDLER

Material: Steel, zinc-plated.
As spare part or as an additional distance bush for double-sided mounting.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.39 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulleys profile HTD 8M, for 20 mm wide belts (22004)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

Select to compare

Configure now
Starting from^∗ ：	14.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulleys profile HTD 8M, for mounting with taper clamping bushes, for 50 mm wide belts (22005)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

· Conical hole for taper clamping bushes

Select to compare

Configure now
Starting from^∗ ：	29.39 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulleys profile HTD 8M, for assembly with taper clamping bushes for belt width 20 mm (22005)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

· Conical hole for taper clamping bushes

Select to compare

Configure now
Starting from^∗ ：	19.07 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulley profile HTD 3M, Form P (22004)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

· Low noise and maintenance

Select to compare

Configure now
Starting from^∗ ：	8.96 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Timing belt pulleys with keyless bushings / P8M / flanged pulley deselectable / aluminium, steel

MISUMI

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	9 Days

Promotional pricing

Flanged wheels for KATAYAMA / MXL, XL, L, H, S5M, T5, T10 / aluminium / KTA

Flanged wheels for KATAYAMA / MXL, XL, L, H, S5M, T5, T10 / aluminium / KTA【1-2 Pieces Per Package】

KATAYAMA CHAIN

KANA timing pulley flange is a K timing pulley accessory part, but only the flange is available for sale.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.83 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Flanged wheels for KATAYAMA / MXL, XL, L, H, S5M, T5, T10 / stainless steel / KTS

Flanged wheels for KATAYAMA / MXL, XL, L, H, S5M, T5, T10 / stainless steel / KTS【2 Pieces Per Package】

KATAYAMA CHAIN

KANA timing pulley flange is a K timing pulley accessory part, but only the flange is available for sale.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	10.22 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Timing belt pulleys / H / flanged pulley selectable / configurable / cast iron, steel

MITSUBOSHI BELTING

Easy specification of shaft hole type/diameter. MISUMI can machine the shaft hole for the pulley of the Mitsuboshi belt without drawings for delivery.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	32.03 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Timing belt pulleys / T5 / flanged pulley selectable / configurable / material selectable / burnished, chemically nickel-plated

MITSUBOSHI BELTING

Easy specification of shaft hole type/diameter. MISUMI can machine the shaft hole for the pulley of the Mitsuboshi belt without drawings for delivery.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.22 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Timing belt pulleys / 8YU / with flanged pulley / steel

UNITTA

Pulley for 8YU type belts

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	80.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Timing belt pulleys / XL / flanged pulley selectable / steel

UNITTA

Pulley for XL type belts

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	17.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Timing belt pulleys / H / without flanged pulley / steel, grey cast iron / STB

KANEMITSU

JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type H, teeth no. 28 (carbon steel) teeth no. 30 (exceeds FC200 material)

[Features]
· Nominal diameter from 4 to 30 inches, 2 to 6 grooves for rich lineup, and dimensional precision to JIS reference standards, good balance measurements, can be used directly on high-speed rotator.

Select to compare

Configure now
Starting from^∗ ：	104.42 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Timing belt pulleys / L / without flanged pulley / steel / L050AF

BANDO

Pulley for turning the synchro belt. The special sized axles can also be processed. An abundant selection of sizes are available.

[Features]
· Shaft hole machining type.
· Abundant sizes can be used for special shaft diameters (general purpose specifications).
· Bushing Type.
· Use taper lock (TL) bushing.
· Easy to install and remove on shaft

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.15 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / L / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / L075

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	30.03 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / S3M / flanged pulley selectable / configurable / aluminium / anodised / S3M0150

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	24.91 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / S8M / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / S8M0150

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	44.26 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / S8M / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / S8M0300

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	70.84 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys for TaperLock / 14M / steel, grey cast iron / SGVTB

CONCAR

[Specifications]
・Division(mm): 14

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys for TaperLock / 14M / steel, grey cast iron / SGVTB

Select to compare

Configure now
Starting from^∗ ：	80.34 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / AT5 / with flanged pulley / aluminium / SGJ

CONCAR

[Specifications]
・Material: Aluminum
・Division(mm): 5

Timing belt pulleys / AT5 / with flanged pulley / SGJ

Select to compare

Configure now
Starting from^∗ ：	6.00 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / H / with flanged pulley / steel, grey cast iron / SGD

CONCAR

[Specifications]
・Division(mm): 12.7

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / H / with flanged pulley / steel, grey cast iron / SGD

Select to compare

Configure now
Starting from^∗ ：	9.08 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / XL / with flanged pulley / steel, grey cast iron / SGB

CONCAR

[Specifications]
・Belt Width Used(mm): 9.53
・Division(mm): 5.08

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / XL / with flanged pulley / steel, grey cast iron / SGB

Select to compare

Configure now
Starting from^∗ ：	6.91 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Toothed belt pulleys, T10 profile (22002)

NORELEM

· Standard T-profile acc. to DIN 7721 T2

· Trapezoidal toothing with metric pitch

Select to compare

Configure now
Starting from^∗ ：	9.99 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulleys profile HTD 8M, for mounting with taper clamping bushes, for 30 mm wide belts (22005)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

· Conical hole for taper clamping bushes

Select to compare

Configure now
Starting from^∗ ：	22.26 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed belt pulleys, AT 10 profile (22003)

NORELEM

· Standard AT profile

· Trapezoidal toothing with metric pitch

Select to compare

Configure now
Starting from^∗ ：	13.41 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Timing belt pulleys with keyless bushings / L / flanged pulley deselectable / aluminium, steel / HPL

MISUMI

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	85.41 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Type
Belt-shaped
Belt Width Used(mm)
Operating belt width(Inch)
The Number of Teeth
Pulley Shape
Material
Surface Treatment

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MITSUBOSHI BELTING	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	NORELEM	NORELEM	MISUMI	MISUMI	KATAYAMA CHAIN	KATAYAMA CHAIN	KONISHI MFG	UNITTA	MITSUBOSHI BELTING	MITSUBOSHI BELTING	CONCAR	CONCAR	MAEDLER	NORELEM	NORELEM	NORELEM	NORELEM	MISUMI	KATAYAMA CHAIN	KATAYAMA CHAIN	MITSUBOSHI BELTING	MITSUBOSHI BELTING	UNITTA	UNITTA	KANEMITSU	BANDO	MITSUBOSHI BELTING	MITSUBOSHI BELTING	MITSUBOSHI BELTING	MITSUBOSHI BELTING	CONCAR	CONCAR	CONCAR	CONCAR	NORELEM	NORELEM	NORELEM	MISUMI
Product Series	Timing belt pulleys / S5M / flanged pulley selectable / configurable / aluminium / anodised / S5M0100	Timing belt pulleys / 3M / with flanged pulley / aluminium / SGS	Timing belt pulleys / 5M / with flanged pulley / aluminium, steel / SGT	Timing belt pulleys / 3M / with flanged pulley / steel, grey cast iron / SGU	Timing belt pulleys / T10 / with flanged pulley / aluminium / SGI	Timing belt pulleys for TaperLock / 14M / steel, cast iron / PCGT	Timing belt pulleys / MXL / with flanged pulley / aluminium / SGA	Toothed pulleys profile HTD 5M, for 25 mm wide belts (22004)	Toothed pulley profile HTD 3M, Form G (22004)	Timing belt pulleys with keyless bushings / H / flanged pulley deselectable / aluminium, steel / HPL	Tensioner Idlers / toothed / H, L / flanged pulley selectable / single bearing, double bearing / aluminium, steel	Flanged wheels for KATAYAMA / MXL, XL, L, S2M, S3M, S5M, T5, T10 / aluminium / KTA【1-2 Pieces Per Package】	Timing belt pulleys / S5M / with flanged pulley / steel / S5M100, S5M150, S5M250	Tensioner Idlers / profile selectable / with flanged pulley / single bearing, double bearing / steel / TPI	Timing belt pulleys / L / flanged pulley selectable / steel	Timing belt pulleys / H / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / H200	Timing belt pulleys / S5M / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / S5M0250	Timing belt pulleys / 14M / with flanged pulley / steel, grey cast iron / SGV	Timing belt pulleys / T5 / with flanged pulley / aluminium / SGH	Distance Bushes for Tensioning Rollers / Idlers TS	Toothed pulleys profile HTD 8M, for 20 mm wide belts (22004)	Toothed pulleys profile HTD 8M, for mounting with taper clamping bushes, for 50 mm wide belts (22005)	Toothed pulleys profile HTD 8M, for assembly with taper clamping bushes for belt width 20 mm (22005)	Toothed pulley profile HTD 3M, Form P (22004)	Timing belt pulleys with keyless bushings / P8M / flanged pulley deselectable / aluminium, steel	Flanged wheels for KATAYAMA / MXL, XL, L, H, S5M, T5, T10 / aluminium / KTA【1-2 Pieces Per Package】	Flanged wheels for KATAYAMA / MXL, XL, L, H, S5M, T5, T10 / stainless steel / KTS【2 Pieces Per Package】	Timing belt pulleys / H / flanged pulley selectable / configurable / cast iron, steel	Timing belt pulleys / T5 / flanged pulley selectable / configurable / material selectable / burnished, chemically nickel-plated	Timing belt pulleys / 8YU / with flanged pulley / steel	Timing belt pulleys / XL / flanged pulley selectable / steel	Timing belt pulleys / H / without flanged pulley / steel, grey cast iron / STB	Timing belt pulleys / L / without flanged pulley / steel / L050AF	Timing belt pulleys / L / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / L075	Timing belt pulleys / S3M / flanged pulley selectable / configurable / aluminium / anodised / S3M0150	Timing belt pulleys / S8M / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / S8M0150	Timing belt pulleys / S8M / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / S8M0300	Timing belt pulleys for TaperLock / 14M / steel, grey cast iron / SGVTB	Timing belt pulleys / AT5 / with flanged pulley / aluminium / SGJ	Timing belt pulleys / H / with flanged pulley / steel, grey cast iron / SGD	Timing belt pulleys / XL / with flanged pulley / steel, grey cast iron / SGB	Toothed belt pulleys, T10 profile (22002)	Toothed pulleys profile HTD 8M, for mounting with taper clamping bushes, for 30 mm wide belts (22005)	Toothed belt pulleys, AT 10 profile (22003)	Timing belt pulleys with keyless bushings / L / flanged pulley deselectable / aluminium, steel / HPL
CAD	2D / 3D									2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D								2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D			2D / 3D	2D / 3D	2D / 3D	2D / 3D								2D / 3D
Starting from^∗	21.73 € *Unit price with basic configuration Volume Discount	6.91 € *Unit price with basic configuration	7.26 € *Unit price with basic configuration	14.54 € *Unit price with basic configuration	11.98 € *Unit price with basic configuration	174.34 € *Unit price with basic configuration	11.98 € *Unit price with basic configuration	9.77 € *Unit price with basic configuration	17.35 € *Unit price with basic configuration	101.81 € *Unit price with basic configuration Volume Discount	34.30 € *Unit price with basic configuration Volume Discount	2.00 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.78 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	74.88 € *Unit price with basic configuration	26.19 € *Unit price with basic configuration Volume Discount	133.34 € *Unit price with basic configuration	27.39 € *Unit price with basic configuration Volume Discount	64.34 € *Unit price with basic configuration	8.00 € *Unit price with basic configuration	0.39 € *Unit price with basic configuration Volume Discount	14.67 € *Unit price with basic configuration	29.39 € *Unit price with basic configuration	19.07 € *Unit price with basic configuration	8.96 € *Unit price with basic configuration	-	7.83 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.22 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	32.03 € *Unit price with basic configuration	14.22 € *Unit price with basic configuration Volume Discount	80.47 € *Unit price with basic configuration Volume Discount	17.82 € *Unit price with basic configuration Volume Discount	104.42 € *Unit price with basic configuration	20.15 € *Unit price with basic configuration Volume Discount	30.03 € *Unit price with basic configuration	24.91 € *Unit price with basic configuration Volume Discount	44.26 € *Unit price with basic configuration Volume Discount	70.84 € *Unit price with basic configuration Volume Discount	80.34 € *Unit price with basic configuration	6.00 € *Unit price with basic configuration	9.08 € *Unit price with basic configuration	6.91 € *Unit price with basic configuration	9.99 € *Unit price with basic configuration	22.26 € *Unit price with basic configuration	13.41 € *Unit price with basic configuration	85.41 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	9 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	4 Days	4 Days	9 Days	9 Days	Same day	Same day	6 Days	6 Days	14 Days	9 Days	3 Days	3 Days	4 Days	4 Days	4 Days	4 Days	4 Days	9 Days	Same day	8 Days	7 Days	7 Days	6 Days	6 Days	8 Days	9 Days	9 Days	9 Days	9 Days	9 Days	3 Days	3 Days	3 Days	3 Days	4 Days	4 Days	4 Days	9 Days
Specifications										Order quantities extended (D-JIT)	Order quantities extended (D-JIT)														Order quantities extended (D-JIT)																				Order quantities extended (D-JIT)
Type	Timing pulley	-	-	-	-	-	-	Timing pulley	Timing pulley	Surface Pressure Pulley	Idlers with Teeth	Flange	Timing pulley	Idlers with Teeth	Timing pulley	Timing pulley	Timing pulley	-	-	-	Timing pulley	Timing pulley	Timing pulley	Timing pulley	Surface Pressure Pulley	Flange	Flange	Timing pulley	Timing pulley	Timing pulley	Timing pulley	Surface Pressure Pulley	Timing pulley	Timing pulley	Timing pulley	Timing pulley	Timing pulley	-	-	-	-	Timing pulley	Timing pulley	Timing pulley	Surface Pressure Pulley
Belt-shaped	S5M	-	-	-	-	-	-	-	-	H	H ～ L	-	S5M	L	L	H	S5M	-	-	-	-	-	-	-	P8M	-	-	H	T5	8YU	XL	H	L	L	S3M	S8M	S8M	-	-	-	-	T10	-	AT10	L
Belt Width Used(mm)	10	6 ～ 15	9 ～ 25	20 ～ 85	16 ～ 50	20 ～ 125	6.35	25	9 ～ 15	19.1 ～ 50.8	12.7 ～ 50.8	-	10 ～ 25	12.7	50 ～ 100	50.8	25	40 ～ 115	10 ～ 25	-	20	50	20	9 ～ 15	15 ～ 25	-	-	25.4 ～ 50.8	10	15 ～ 40	37	27 ～ 32	12.7 ～ 25.4	19.1	15	15	30	40 ～ 115	10 ～ 25	19.05 ～ 76.2	9.53	16 ～ 32	30	16 ～ 32	12.7 ～ 38.1
Operating belt width(Inch)	-	-	-	-	-	-	-	-	-	0.75 ～ 2	0.5 ～ 2	-	-	0.5	-	-	-	-	-	-	-	-	-	-	-	-	-	1 ～ 2	-	-	-	-	0.5 ～ 1	-	-	-	-	-	-	-	-	-	-	-	0.5 ～ 1.5
The Number of Teeth	14 ～ 60	10 ～ 72	12 ～ 72	18 ～ 192	12 ～ 60	28 ～ 192	16 ～ 72	12 ～ 72	48 ～ 72	14 ～ 50	14 ～ 30	-	14 ～ 60	21	10 ～ 32	36	14 ～ 60	28 ～ 144	10 ～ 60	-	18 ～ 192	28 ～ 192	22 ～ 90	10 ～ 15	20 ～ 60	-	-	14 ～ 40	12 ～ 60	20 ～ 72	10 ～ 40	18 ～ 96	10 ～ 50	12 ～ 44	14 ～ 60	18 ～ 60	18 ～ 60	28 ～ 192	12 ～ 60	14 ～ 120	10 ～ 72	12 ～ 60	22 ～ 144	15 ～ 60	14 ～ 72
Pulley Shape	Shape A / B Type	-	-	-	-	-	-	-	-	Shape E / F Type	-	-	Shape A / B Type	Shape A	-	B Type	Shape A / B Type	-	-	-	-	-	-	-	Shape E / F Type	-	-	Shape A / B Type	Shape A / B Type / C Type / W Shaped	-	-	B Type / W Shaped / F Type	Shape A / B Type	Shape A / B Type	Shape A / B Type / C Type	Shape A / B Type	Shape A / B Type	-	-	-	-	-	-	-	Shape E / F Type
Material	Aluminum	-	-	-	-	-	-	Steel / Aluminum	Aluminum	Steel / Aluminum	Steel / Aluminum	-	Steel	Steel	Steel	Steel	Steel	-	-	Steel	Steel / Grey Iron	Grey Iron	Grey Iron	Aluminum	Steel / Aluminum	-	-	Steel	Steel / Aluminum	Steel	Steel	Steel	Steel	Steel	Aluminum	Steel	Steel	-	-	-	-	Aluminum	Grey Iron	Aluminum	Steel / Aluminum
Surface Treatment	N/A / Clear Anodized Aluminum	-	-	-	-	-	-	-	-	N/A / Black Oxide / Clear Anodized Aluminum / Electroless Nickel Plating	Black Oxide / Clear Anodized Aluminum / Hard Anodized Aluminum / Electroless Nickel Plating	-	N/A	N/A	-	N/A	N/A / Black Oxide / Electroless Nickel Plating	-	-	-	-	-	-	-	Black Oxide / Clear Anodized Aluminum / Hard Anodized Aluminum / Electroless Nickel Plating	-	-	N/A	N/A	-	-	N/A	N/A	N/A / Black Oxide / Electroless Nickel Plating	N/A / Clear Anodized Aluminum	N/A / Black Oxide / Electroless Nickel Plating	N/A / Black Oxide / Electroless Nickel Plating	-	-	-	-	-	-	-	N/A / Black Oxide / Clear Anodized Aluminum / Hard Anodized Aluminum / Electroless Nickel Plating

Filter by:

Stock

- Show only stock items
Clear

Belt-shaped
1.5GT

2GT

P2M

S2M

MR2(for PowerGrip® GT®3)

T2.5

3GT

P3M

S3M

MR3(for PowerGrip® GT®3)

5GT

5M

AT5

P5M

S5M

T5

MR5(for PowerGrip® GT®3)

8M

8YU

P8M

S8M

AT10

T10

14M

S14M

H

L

MXL

XL
Details

Clear

Belt Width Used(mm)
3

4

4 and 6

4.8

5

6

6.35

6.4

7

7.9

9

9.5

9.53

10

12

12.7

14

15

16

18

19

19.05

19.1

20

21

25

25.4

26

27

28

30

31

32

36

37

037

38.1

40

50

050

50.8

55

60

62

68

075

76.2

80

85

90

100

115

125
Clear

Operating belt width(Inch)
0.19

0.25

0.31

0.37

0.5

0.75

1

1.5

2

3
Clear

The Number of Teeth
10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

62

64

65

66

68

69

70

71

72

75

80

82

84

90

94

96

100

106

112

116

118

120

136

140

144

168

192
Clear

Pulley Shape
- Shape A
- B Type
- C Type
- W Shaped
- Shape E
- F Type
Images

Clear

Material
- Steel
- Aluminum
- Stainless Steel
- Resin
- Grey Iron
Clear

Surface Treatment
Clear

Brand

- MISUMI (54)
- Cost Efficient Products ()
Clear

CAD data type

- 2D
- 3D
Clear

Standard shipping days

All

Same day

3 Days or Less

4 Days or Less

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less

11 Days or Less
Clear