V Belt（Page 2）

?* Information on days to ship and prices

• 

  V Belt Red (C Type)

  BANDO

  Uses synthetic rubber for excellent heat and oil resistance. With antistatic performance.

  Select to compare

  Configure now
  Starting from∗ ：	46.65 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 11MS, Composite Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 11
  ・Height(mm): 7
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 11MS, Composite Belt

  Select to compare

  Configure now
  Starting from∗ ：	113.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Powerband, Quad-Power II

  GATES

  · Energy efficiencies up to 98%
  · Less downtime
  · Fewer replacements
  · Higher performance
  · Wider temperature range
  · Halogen-free belt
  · A clear branding for ease of identification
  · Perfect fit on standard ISO/DIN V-pulleys and 3VX/5VX for RMA pulley grooves
  · REACH and RoHS 2 compliant
  · Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX
  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · Temperature range: -50°C to +130°C

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	26.00 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, Polyflex

  GATES

  · Design freedom and space savings which are not possible with conventional rubber construction belts
  · Low maintenance cost as belt needs less re-tensioning
  · Long belt life on compact drives
  · Available on demand as Matched sets. Contact Customer Service for details
  · Temperature range: -54°C up to +85°C

  Select to compare

  Configure now
  Starting from∗ ：	13.65 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  e-POWER Belt, Raw Edge Cogged AX Type

  MITSUBOSHI BELTING

  Excellent bend tolerance. Less power loss due to bending compared to conventional standard V-belts results in energy-saving effect.

  Select to compare

  Configure now
  Starting from∗ ：	22.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  MaxStar Wedge V-Belt 8V Type

  MITSUBOSHI BELTING

  Unique V-belt with narrow shape and high transmission capability.
  
  [Features]
  · Provides energy saving, compact design.
  · Up to 40 m / sec high-speed operation possible.
  · Excellent heat resistance and static electricity prevention.
  · Belt with good dimensional stability, "set-free" effective for all multi runners.
  · The wedge pulley is a standardized bushing type for easy installation.

  Select to compare

  Configure now
  Starting from∗ ：	489.24 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Maxstar Multi-Wedge V-Belt, 8V Type

  MITSUBOSHI BELTING

  Unique V-belt with narrow shape and high transmission capabilities. Saves energy, enables compact design. Excellent heat resistance and static electricity prevention.

  Select to compare

  Configure now
  Starting from∗ ：	777.36 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  V-Belt Red (A Type)

  BANDO

  Uses synthetic rubber for excellent heat and oil resistance. With antistatic performance.
  
  [Features]
  · Low cost per horsepower transmission
  · Commercially available.
  · Easy handling.
  · Powerful, low elongation polyester cord employed, with special synthetic rubber formulation, giving power increase of about 60% compared to standard.
  · Electrical resistance (anti-static performance) is 0.05 to 0.2 MΩ (within the V-belt 216 mm), and US RMA standard approved (rated 6 MΩ or less) flame retardant, with excellent heat, oil, and chemical-resistance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Orange Label V-Belt, RLB Type

  MITSUBOSHI BELTING

  Particularly well-suited to use in agricultural machinery. Thin belt designed to withstand harsher operating conditions than general industrial belts, such as large shocks, small pulley diameters, reverse bending and high temperatures. Excellent heat resistance, flexibility and crack resistance.

  Select to compare

  Configure now
  Starting from∗ ：	20.00 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Twin V-Belt - Profile CC

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 22
  ・Height(mm): 17
  ・Standard: DIN 7722
  
  ConCar Double V-belts are used mainly with agricultural machinery. Due to the edge angles on both sides, several pulleys can be driven in the counter-direction in one drive system. The reference lengths given correspond to the average length.

  Select to compare

  Configure now
  Starting from∗ ：	92.48 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile JPU

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Height(mm): 3.5
  ・Rib spacing(mm): 2.34
  
  Ribbed belts – also known as Poly-V belts – are a mixture consisting of flat belts and V-belts, and combine the advantages of both. Essentially, this combination produces the flexibility of a flat belt and the favourable power transfer of a V-belt.

  Select to compare

  Configure now
  Starting from∗ ：	7.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile PH

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 3
  ・Rib spacing(mm): 1.6
  ・Standard: DIN 7867

  Select to compare

  Configure now
  Starting from∗ ：	15.34 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Super HC Powerband

  GATES

  · Better resistance to vibrations
  · High stability and smooth running on the toughest drives
  · Important design economies possible
  · Savings in drive space and weight due to high transmission efficiency
  · Available on demand in Matched sets.Contact Customer Service for details
  · REACH and RoHS 2 compliant
  · Temperature range: -30°C to +60°C

  Select to compare

  Configure now
  Starting from∗ ：	78.32 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Twin Power

  GATES

  · High loading capacity
  · Twin Power™ can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides - provided the sum of the loads does not exceed the maximum capacity
  · Non-slip positive drive
  · Running at low noise
  · Free of lubrication and maintenance
  · Temperature range: -30°C to +100°C

  Select to compare

  Configure now
  Starting from∗ ：	76.19 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Twin Power GT2

  GATES

  · High loading capacity
  · Twin Power™ can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides - provided the sum of the loads does not exceed the maximum capacity
  · Non-slip positive drive
  · Running at low noise
  · Free of lubrication and maintenance
  · Temperature range: -30°C to +100°C

  Select to compare

  Configure now
  Starting from∗ ：	141.47 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Double V-belt HAA2000 Series

  OPTIBELT

  · Polyester or aramid cord
  · Outstanding flexibility
  · Excellent running properties
  · High transverse strength
  · Ideally suited for serpentine designs
  · Electrically conductive
  · Temperature range -35°C to +85°C

  Select to compare

  Configure now
  Starting from∗ ：	48.30 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Wrapped V-belt RP Series / ISO 1813 / SPZ3000 RP

  OPTIBELT

  · Maintenance-free
  · Powerful
  · Cost-effective
  · S=C Plus usable in sets
  · Environmentally friendly
  · Electrically conductive according to ISO 1813
  · Oil-resistant
  · Heat-resistant
  · Dust-protected as standard

  Select to compare

  Configure now
  Starting from∗ ：	34.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  V-belt / Mixture of Elastomer

  GATES

  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · Excellent price/performance ratio
  · Trusted Gates quality that equals peace of mind
  · Made to run in all your standard industry drives
  · REACH and RoHS 2 compliant
  · Available in all popular sections and belt lengths
  · Specified to operate in a temperature range from -30°C to +70°C

  Select to compare

  Configure now
  Starting from∗ ：	19.00 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, VulcoPower

  GATES

  [Specifications]
  ・Length(mm): 980
  ・Height(mm): 8
  ・Width(mm): 13
  
  Gates V-belts are engineered to run maintenance-free to keep your vehicles moving without the need for lubrication or retensioning. V-belts are wear, corrosion, and heat resistance with OE quality fit and construction for reliable, long-lasting performance.

  Select to compare

  Configure now
  Starting from∗ ：	35.18 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, FO Advance

  CONTITECH

  [Specifications]
  ・Material: Mixture of elastomer
  ・FO Advance
  ・Height(mm): 8, 9, 13
  ・Width(mm): 9.7, 12.7, 16.3

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.38 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  V-belt, FO Pioneer

  CONTITECH

  [Specifications]
  ・Material: Mixture of elastomer
  ・FO Pioneer
  ・Height(mm): 8, 9, 13
  ・Width(mm): 9.7, 12.7, 16.3

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.57 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Pluriband

  MEGADYNE

  Banded version of Megadyne V-Belt, PLURIBAND eliminates belt whip and twist on wedge-type drives. They ensure smoothest and strongest operation.

  Select to compare

  Configure now
  Starting from∗ ：	504.51 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Power Belt, Pluriband

  MEGADYNE

  Classical Wrapped Belts, Oleostatic Gold B Section.

  Select to compare

  Configure now
  Starting from∗ ：	726.72 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Wide V-belt, Varisect

  MEGADYNE

  [Specifications]
  ・Width: 22, 28
  ・Length(mm): 1060, 1700
  ・Height(mm): 8
  
  V-belts are a variety of drive belts that feature tapered sides designed to fit into pulleys with side guides. Their unique shape, which features a trapezoidal cross-section, allows them to tightly wedge into grooved pulleys or sheaves and transmit power as tensions rise.

  Select to compare

  Configure now
  Starting from∗ ：	244.43 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt DIN 7753 (22071)

  NORELEM

  · Antistatic
  
  · Endless design
  
  · With polyester tension cords
  
  · Equal length
  
  · More efficient than classic V-belts.

  Select to compare

  Configure now
  Starting from∗ ：	9.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Energy Saving Power Ace (3V)

  BANDO

  V-belt allows for reduction of power of factory equipment. Narrow width V-belt type can save energy.
  
  [Features]
  · Reduce torque loss and improve transmission efficiency.
  · Allows energy conservation & CO2 reduction. No need to change the pulleys, and can be used simply by changing the belt. Reduction in belt bending rigidity and suppression of self-heating achieved, for stable lifetime performance exceeding power ace.

  Select to compare

  Configure now
  Starting from∗ ：	28.34 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Orange Label V-Belt, RLA Type

  MITSUBOSHI BELTING

  Particularly well-suited to use in agricultural machinery. Thin belt designed to withstand harsher operating conditions than general industrial belts, such as large shocks, small pulley diameters, reverse bending and high temperatures. Excellent heat resistance, flexibility and crack resistance.

  Select to compare

  Configure now
  Starting from∗ ：	13.62 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Orange Label V-Belt, RLC Type

  MITSUBOSHI BELTING

  Particularly well-suited to use in agricultural machinery. Thin belt designed to withstand harsher operating conditions than general industrial belts, such as large shocks, small pulley diameters, reverse bending and high temperatures. Excellent heat resistance, flexibility and crack resistance.

  Select to compare

  Configure now
  Starting from∗ ：	40.13 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile 5V

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 15
  ・Height(mm): 13
  ・Standard: USA Standard RMA/MPTA
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	17.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile SPA / AV 13

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 12.7
  ・Height(mm): 10
  ・Standard: DIN 7753
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	7.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile SPZ / AV 10

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 9.7
  ・Height(mm): 8
  ・Standard: DIN 7753
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	5.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile XPB / 5VX

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 16.3
  ・Height(mm): 13
  ・Standard: DIN 7753
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Select to compare

  Configure now
  Starting from∗ ：	19.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile 5V / 15J

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 15.1
  ・Rib spacing(mm): 17.5
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Select to compare

  Configure now
  Starting from∗ ：	99.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile SPC

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 22.6
  ・Rib spacing(mm): 25.5
  ・Standard: DIN 7753
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Select to compare

  Configure now
  Starting from∗ ：	303.66 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 13 / A

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 13
  ・Height(mm): 8
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	7.04 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile X17 / BX

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 17
  ・Height(mm): 11
  ・Standard: DIN 2215
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Select to compare

  Configure now
  Starting from∗ ：	11.83 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  GardenPower - Profile 4L

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 12.7
  ・Height(mm): 7.9
  ・Standard: RMA IP23
  
  GardenPower coupling belt with aramid cord, suitable for use e.g. in garden and agricultural appliances, are extremely durable thanks to their highly rigid structure. The aramid cord means that these belts are particularly dimensionally stable and low-stretch. The special textile wrapping ensures an even drive and enables slippage during coupling. They are used mainly in areas of application with high performance requirements, such as riding mowers, standard lawnmowers, shredders, snow blowers and other appliances subject to high loads.

  Select to compare

  Configure now
  Starting from∗ ：	17.07 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Power Twist Plus

  CONCAR

  [Specifications]
  ・Type: without metal rivets
  ・Material: Polyurethane with fabric inserts
  ・Colour: Red
  ・Roll length(m): 10 or 2 (short length)
  
  Link belts are the ideal solution for areas of use under difficult conditions. Power Twist Plus (red), Nu-T-Link (orange) and Super-T-Link (blue) are available in rolls by length; the surcharge for cutting to length is 10 %. In some cases, short lengths are also available.

  Select to compare

  Configure now
  Starting from∗ ：	52.94 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  PU V-Belt - DVL

  CONCAR

  [Specifications]
  ・Type: not serrated
  ・Material: Polyurethane
  ・Shore hardness(°): 80 Shore A
  ・Colour: Brown
  ・Width(mm): 13
  ・Height(mm): 8
  
  With its large selection of PU V-belts, ConCar offers solution options for all sectors for your conveyance and transport applications. PU V-belts are available in many different profiles, hardness degrees (colours), with and without tension members, and are largely FDA / USDA approved. The range is rounded off by corresponding welding tools, with which you can easily weld these belts. The tools are also available individually.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  V-Belt - Profile 47 x 13

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 47
  ・Height(mm): 13
  ・Angle(°): 28
  ・Standard: DIN 7719 / ISO 1604
  
  ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

  Select to compare

  Configure now
  Starting from∗ ：	79.26 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile PM

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 13
  ・Rib spacing(mm): 9.4
  ・Standard: DIN 7867
  
  ConCar PolyRib ribbed belts – also known as Poly-V belts – are a mixture consisting of flat belts and V-belts, and combine the advantages of both. Essentially, this combination produces the flexibility of a flat belt and the favourable power transfer of a V-belt.

  Select to compare

  Configure now
  Starting from∗ ：	120.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 11M, Single Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 11
  ・Height(mm): 7
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 11M, Single Belt

  Select to compare

  Configure now
  Starting from∗ ：	55.46 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Delta Narrow, V-belt

  GATES

  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · Excellent price/performance ratio
  · Trusted Gates quality that equals peace of mind
  · Made to run in all your standard industry drives
  · REACH and RoHS 2 compliant
  · Available in all popular sections and belt lengths
  · Specified to operate in a temperature range from -30°C to +70°C

  Select to compare

  Configure now
  Starting from∗ ：	57.25 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, Quad-Power 4

  GATES

  · Energy efficiencies up to 98%
  · Less downtime
  · Fewer replacements
  · Higher performance
  · Wider temperature range
  · Halogen-free belt
  · A clear branding for ease of identification
  · Perfect fit on standard ISO/DIN V-pulleys and 3VX/5VX for RMA pulley grooves
  · REACH and RoHS 2 compliant
  · Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX
  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · Temperature range: -50°C to +130°C

  Select to compare

  Configure now
  Starting from∗ ：	9.27 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  V-belt, Truflex

  GATES

  [Specifications]
  ・Material: mixture of elastomer
  ・Length(mm): 737
  ・Height(mm): 3.175
  ・Width(mm): 6.35
  
  Light-duty Sheaves-bored-to-size, Light-duty Sheaves-bushed, Light-duty Sheaves-vaniable Pitch

  Select to compare

  Configure now
  Starting from∗ ：	29.75 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

Loading...