Keyless Bushing (Fastening Fittings)（Page 3）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Taper Bushes 1610
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Configure nowStarting from∗ ： 8.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 2517
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Configure nowStarting from∗ ： 17.42 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 3020
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Configure nowStarting from∗ ： 22.50 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Welding Hubs for Taper Bushes
MAEDLER
Material: Steel (St52 or comparable), good weldable.
Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft.
Taper bush and chain plate wheel have to be ordered separately.
Recommended bore tolerance: H8.
Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat.- Volume Discount
Configure nowStarting from∗ ： 11.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TOK Version B
MAEDLER
Material Version B: Steel with corrosion protection (inner bush and nut nickel-plated, outer bush zinc-plated).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 14.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TMK Version A
MAEDLER
Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• With a second hexagon to hold against while tightening the nut.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 15.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Bushes MSD
MAEDLER
Material: Steel.
The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted.
Concentricity: ≈ 0.03 - 0.06 mm.
Tolerance: Shaft h8 - k6 (for Prod. No. 615 215 00 only h7), Hub H7.
Temperature range: -30 °C to 85 °C.
PW ≈ 90N/mm² PN ≈ 70N/mm132- Volume Discount
Configure nowStarting from∗ ： 199.10 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shrink discs Form B (23382)
NORELEM
· To connect a hollow shaft to a shaft
· Suitable for static, dynamic and shock loads
· For very high torques
· No shift of axial shaft/hub during assembly
· Self-centringConfigure nowStarting from∗ ： 37.22 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications
ISEL
Nut tightening shortens tightening time. Electroless nickel plated product.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 90.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing, Self-Aligning Type SDS
Save & Secure
Self-centering type of keyless bushing. Abundant variations to choose from, with allowable torque from 6.2 to 13000N·m. The SS company manufactures a 20% share of the couplings in Taiwan. The company's are centered on China and Southeast Asia, and is trying to expand both its domestic and foreign shares.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 24.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
SP Bushing
EVER-ON CORPORATION
[Features]
● Shaft hole machining and QA machining not required.
● Conforms to new JIS key specifications.
[Applications]
● For connecting shafts to their appropriate pulleys.- Volume Discount
Configure nowStarting from∗ ： 32.67 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tapered Clamping Bush 1108 with Inch Drill
CONCAR
[Specifications]
・Type: 1108
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 10.91 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 1210 with Inch Drill
CONCAR
[Specifications]
・Type: 1210
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 14.54 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 1210 with Metric Drill
CONCAR
[Specifications]
・Type: 1210
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 7.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 1310 with Metric Drill
CONCAR
[Specifications]
・Type: 1310
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 9.08 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 1610 with Inch Drill
CONCAR
[Specifications]
・Type: 1610
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 17.45 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 1615 with Inch Drill
CONCAR
[Specifications]
・Type: 1615
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 18.17 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 1615 with Metric Drill
CONCAR
[Specifications]
・Type: 1615
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 9.08 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 2012 with Inch Drill
CONCAR
[Specifications]
・Type: 2012
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 21.45 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 2517 with Inch Drill
CONCAR
[Specifications]
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Tapered Clamping Bush 2517 with Inch DrillConfigure nowStarting from∗ ： 18.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 3020 with Metric Drill
CONCAR
[Specifications]
・Type: 3020
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 18.54 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 3030 with Inch Drill
CONCAR
[Specifications]
・Type: 3030
・Body Material: Cast Iron
・Bore diameter(mm): 76.2
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 92.34 € Min. Shipping Days ： 17 Days *Unit price with basic configuration
-
Tapered Clamping Bush 3030 with Metric Drill
CONCAR
[Specifications]
・Type: 3030
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 25.80 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 3525 with Metric Drill
CONCAR
[Specifications]
・Type: 3525
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 46.17 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 3535 with Inch Drill
CONCAR
[Specifications]
・Type: 3535
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 87.25 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 3535 with Metric Drill
CONCAR
[Specifications]
・Type: 3535
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 43.62 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 4040 with Metric Drill
CONCAR
[Specifications]
・Type: 4040
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 61.43 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 4545 with Metric Drill
CONCAR
[Specifications]
・Type: 4545
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 78.15 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 5050 with Metric Drill
CONCAR
[Specifications]
・Type: 5050
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 125.06 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Locking Assemblies 7003
RINGFEDER
Universal clamping set for small installation space. Self-centering and easy to install for medium to high torques.- 3D CAD data available
Configure nowStarting from∗ ： 11.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies 7004
RINGFEDER
Universal clamping set for a wide range of applications. Self centering and mounting friendly at medium to high torques.- 3D CAD data available
Configure nowStarting from∗ ： 12.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies 7006
RINGFEDER
Universal clamping set for small installation space and axial stop ring. Self-centering and easy to install for medium to high torques.- 3D CAD data available
Configure nowStarting from∗ ： 12.43 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies 7007
RINGFEDER
Universal clamping set for a wide range of applications. Self centering and mounting friendly at medium to high torques. No axial displacement through stop ring.Configure nowStarting from∗ ： 14.23 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies 7014
RINGFEDER
Clamping set for very high torques. The design allows maximum torques and axial forces to be transmitted with a clamping set.- 3D CAD data available
Configure nowStarting from∗ ： 423.17 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies 7070
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.- 3D CAD data available
Configure nowStarting from∗ ： 45.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies 7075
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.- 3D CAD data available
Configure nowStarting from∗ ： 121.17 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies 7080
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity. The clamping set is additionally nickel-plated.- 3D CAD data available
Configure nowStarting from∗ ： 80.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies Stainless Steel 7012 SST
RINGFEDER
Clamping set with small design made of stainless steel. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves. High-strength clamping screws allow a higher performance range.- 3D CAD data available
Configure nowStarting from∗ ： 61.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies Stainless Steel 7110 SST
RINGFEDER
Specially small dimensioned self-centering Locking Assembly without axial displacement. As the locking screws are located out of the actual clamping area and the pressures are relatively low, the hub can be designed economically small. Through high-quality materials, the transmission of higher torques possible.- 3D CAD data available
Configure nowStarting from∗ ： 14.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Shrink Disc Stainless Steel 4061 SST
RINGFEDER
Shrink disc made of stainless steel for high torques. Compensation of smaller tolerances possible with simple assembly and disassembly. Due to special high-strength materials with increased performance range.- 3D CAD data available
Configure nowStarting from∗ ： 41.82 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adaptors for Taper Bushes
MAEDLER
Material: Grey Cast Iron GG25.
Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø da (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.- Volume Discount
Configure nowStarting from∗ ： 7.07 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Bolt-on Hubs for Taper Bushes
MAEDLER
Material: Grey Cast Iron GG25. Product No. 14090147: from steel.
Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.- Volume Discount
Configure nowStarting from∗ ： 14.46 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-A, QPQ-Coated
MAEDLER
Material: Steel.
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For medium high torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 20.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-A, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For low torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 51.84 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-AS
MAEDLER
Material: Steel.
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For medium high torques. Like COM-A, but with slotted rings.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 12.73 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(mm) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(mm) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | NORELEM | ISEL | Save & Secure | EVER-ON CORPORATION | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications | ||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||
| Starting from∗ | 8.19 € *Unit price with basic configuration Volume Discount | 17.42 € *Unit price with basic configuration Volume Discount | 22.50 € *Unit price with basic configuration Volume Discount | 11.88 € *Unit price with basic configuration Volume Discount | 14.88 € *Unit price with basic configuration Volume Discount | 15.88 € *Unit price with basic configuration Volume Discount | 199.10 € *Unit price with basic configuration Volume Discount | 37.22 € *Unit price with basic configuration | 90.75 € *Unit price with basic configuration | 24.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 32.67 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 10.91 € *Unit price with basic configuration | 14.54 € *Unit price with basic configuration | 7.26 € *Unit price with basic configuration | 9.08 € *Unit price with basic configuration | 17.45 € *Unit price with basic configuration | 18.17 € *Unit price with basic configuration | 9.08 € *Unit price with basic configuration | 21.45 € *Unit price with basic configuration | 18.00 € *Unit price with basic configuration | 18.54 € *Unit price with basic configuration | 92.34 € *Unit price with basic configuration | 25.80 € *Unit price with basic configuration | 46.17 € *Unit price with basic configuration | 87.25 € *Unit price with basic configuration | 43.62 € *Unit price with basic configuration | 61.43 € *Unit price with basic configuration | 78.15 € *Unit price with basic configuration | 125.06 € *Unit price with basic configuration | 11.38 € *Unit price with basic configuration | 12.95 € *Unit price with basic configuration | 12.43 € *Unit price with basic configuration | 14.23 € *Unit price with basic configuration | 423.17 € *Unit price with basic configuration | 45.20 € *Unit price with basic configuration | 121.17 € *Unit price with basic configuration | 80.83 € *Unit price with basic configuration | 61.87 € *Unit price with basic configuration | 14.00 € *Unit price with basic configuration | 41.82 € *Unit price with basic configuration | 7.07 € *Unit price with basic configuration Volume Discount | 14.46 € *Unit price with basic configuration Volume Discount | 20.26 € *Unit price with basic configuration Volume Discount | 51.84 € *Unit price with basic configuration Volume Discount | 12.73 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | Same day | Same day | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 17 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Type | - | - | - | - | - | - | - | Straight | Nut Tightening | Flanged | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Centering | - | - | - | - | Provided | Provided | Provided | - | Provided | Provided | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Not Provided | Not Provided | Not Provided |
| Body Material | - | - | - | - | - | - | - | Steel | Steel | Steel | Steel | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | Grey Iron | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft Bore Dia. d(mm) | - | - | - | - | - | - | - | 18 ～ 80 | 8 ～ 35 | 20 | 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque Range(N•m) | - | - | - | - | - | - | - | 2.0 to 20.0 ～ 50.1 to 70.0 | 20.1 to 50.0 ～ 300.1 to 500.0 | 300.1 to 500.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | - | - | - | - | - | - | - | - | Electroless Nickel Plating | Not Provided | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Hub Dia. D1(mm) | - | - | - | - | - | - | - | 44 ～ 141 | 14 ～ 48 | 47 | 85.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Structure | - | - | - | - | - | - | - | - | Tapered Sleeve Type | Single Cone Type | Single Cone Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Method | - | - | - | - | - | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque(N•m) | - | - | - | - | - | - | - | 12 ～ 70 | 29.4 ～ 461 | 320 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Centering
- Provided
- Not Provided
-
Body Material
-
Shaft Bore Dia. d(mm)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(mm)
- 8
- 9
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 50
- 52
- 53
- 54
- 55
- 56
- 57
- 59
- 60
- 62
- 64
- 65
- 67
- 68
- 70
- 71
- 72
- 73
- 75
- 77
- 78
- 80
- 82
- 84
- 85
- 85.70
- 87
- 90
- 95
- 97
- 100
- 106
- 110
- 112
- 115
- 120
- 125
- 130
- 135
- 138
- 140
- 141
- 145
- 155
- 165
- 180
- 190
- 200
- 210
- 225
- 235
- 250
- 260
- 285
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Keyless Bushing (Fastening Fittings)
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.