Joints for Pipe Frames（Type：Accessories Page 3）

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

• 

  Inner Urethane Cap GAP-4R-BK

  TMEH

  An inner urethane cap (made of urethane) for mounting to pipe ends.
  [Features]
  · The tip shape of the cap is hemispherical.
  · Depending on the type of pipe, some objects might be difficult to install. In such a case, try knocking it in with a plastic hammer, etc.
  · Thicker than other type of cap, allowing it to take heavier loads without breaking.
  · Compatible with 2807 Series ECO, SUH and resin‑coated pipes.
  · Use a hammer to install resin‑coated pipes.
  [Applications]
  · For caps at points at which large loads or impact are applied to the pipe tip.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.62 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Sleeve GAP-44

  TMEH

  Long sleeve for sliding.
  [Features]
  · An integrally molded (cylindrical) type product.
  · Compared to the GAP-12, it is cylindrical and wide, making it suitable for sliding applications.
  · Compatible with GA-12, GA-17, GA-22S, GA-24S and GA-25S metal joints.
  *Slide the pipe through the sleeve before using.
  [Applications]
  · Ideal for creating sliding mechanisms for lightweight objects with pipes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Plastic Cap For Swaged Pipes GAP-4F-BK

  TMEH

  Dedicated end cap for SW09-201 Swaged Pipe.
  [Features]
  · Install by striking the cap or bushing with a plastic hammer, etc.
  [Applications]
  · Mounting to the narrowed tip of a swaged pipe.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.67 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Plastic Parts GAP-6B

  TMEH

  Label case holder.
  [Features]
  · Stops label cases from coming away so easily, even when pulled downward.
  · To install onto a pipe, press in from the front (the GAP-06 was conventionally mounted from below).
  · Prevents label cases from coming away as easily when moved as the GAP-06.
  [Applications]
  · Use together with a label case in places and applications in which labeling is required.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.90 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Plastic Parts GAP-8FN

  TMEH

  A plastic spacer for eliminating height differentials with the joint section when mounting shelf boards in pipe rack systems.
  [Features]
  · As well as eliminating height differentials, the flat section also sits onto the surface below, allowing it to receive ever wider surface areas.
  · Available in ivory (color) or gray.
  [Applications]
  · As a spacer for mounting boards and other flat objects.
  · Preventing middle pieces from bending or warping when mounting shelf boards and top shelf boards.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.70 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Box Stopper BS-01

  TMEH

  A box stopper whose stopper mechanism can be released by pushing the dolly cart or other type of vehicle to which it is installed.
  [Features]
  · The stopper component moves up and down via the action of the spring.
  · Makes loading containers and the like from slide racks and conveyors onto dolly carts much easier and less time consuming.
  [Applications]
  · For applications where containers are transferred from slide racks onto dolly carts, etc.
  · For stoppers that release when connecting to a slide rack from a dolly cart.

  Select to compare

  Configure now
  Starting from∗ ：	94.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Safety Cap For ARG-4030BL

  TMEH

  A protective cap for use at the cut end of aluminum workpiece guide.
  [Features]
  · Mount on the cut end of the ARG-4030BL aluminum workpiece guide to protect against injury.
  · Two ASC-V30 and one ASC-H42L / ASC-H42R are required at both ends of a single workpiece guide.
  [Applications]
  · Ideal when using the ARG-4030BL.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Tool Cap TC-28

  TMEH

  An urethane cap with drill hole for mounting to pipe ends.
  [Features]
  · Features a 19-mm drill hole at the center of the urethane cap.
  · Can be mounted to all pipes with a diameter of ø28.
  · Covers the cut end of the pipe to help protect against injury.
  [Applications]
  · Ideal when inserting tools or markers into pipes.
  · Ideal for preventing damage to cords or other objects when passing them through pipes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Holder for Impact Screwdriver

  TMEH

  A holder for impact drivers.
  [Features]
  · Mount to a pipe rack system using the GA-1S Metal Joint to hold your impact driver.
  · Simply insert your impact driver to hold it. This also makes it easy to take out.
  · Available either in a cylindrical shape or in a cut-away shape. Also available in nylon or steel.
  · Some impact drivers from certain manufacturers may not be held stably.
  [Applications]
  · Used when you want to hold impact drivers in a manner that makes them easy to retrieve.
  · Used by mounting to tool or storage benches.

  Select to compare

  Configure now
  Starting from∗ ：	10.16 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hanging Hook L PH-D

  TMEH

  A straight hook for hanging tools with hook holes in them.
  [Features]
  · Can be easily mounted to pipe racks and its position and mounting position fixed.
  · The hook is made of stainless steel and so does not easily rust, even in places where water is ever present.
  [Applications]
  · Used to hang and manage items such as tools on structures built using a pipe rack system.
  · Insert numbered cards and the like to store them.

  Select to compare

  Configure now
  Starting from∗ ：	6.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hanging Hook U PH-C

  TMEH

  A U-shaped hook for hanging tools that have cords.
  [Features]
  · Can be easily mounted to pipe racks and its position and mounting position fixed.
  · The hook is made of stainless steel and so does not easily rust, even in places where water is ever present.
  [Applications]
  · Ideal for hanging and managing items such as cleaning tools on racks built using a pipe rack system.

  Select to compare

  Configure now
  Starting from∗ ：	6.92 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Step-Adjusting Fixture DK-5

  TMEH

  A ladder-shaped fixture for adjusting the height of steps/stages.
  [Features]
  · Change the height of steps/stages by mounting 4 of these fixtures (2 at the back and 2 at the front).
  · The height can be raised or lowered at a pitch of 50 mm.
  · Inclines can be applied by changing the height individually at the front or back respectively.
  · To mount a single Step-Adjusting Fixture, 4 pcs of G-7AS, 2 sets of BN06 and 4 pcs of M8 nuts are required.
  [Applications]
  · Used when you want to have an easy way to change the height of work benches or shelves.

  Select to compare

  Configure now
  Starting from∗ ：	28.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...