Adjuster
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Standard Receiver Type Adjuster D-A / D-B
DAIWARASHI
The most general standard type adjuster
[Features]
· The screw shaft rotates and tilts somewhat.
· A standard type that can be used as the adjustment bolt for any machinery.
· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
· D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 8.54 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Anchor Fixing, Screw Part Non-Shake D-J-E II
DAIWARASHI
An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 33.18 € Special price Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster with Bottom Part Rubber for Light Vibration-Proofing D-A III / D-A III FR / D-A III SI / D-B III / D-B III FR / D-B III SI
DAIWARASHI
An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
· A nylon washer is used between the receiver and bolt, and rotation is smooth.
· The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
· The SI type is white and is characterized by hardly leaving traces of rubber.
· Suitable for office equipment, etc.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 10.07 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Heavy Weights (Wide Receiver Type) D-C III /D-C III/S / D-C III-W
DAIWARASHI
A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver of the stainless steel D-C III is a forged item.
· D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 41.31 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster, Rubber Receiver Type D-G / D-G II
DAIWARASHI
An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."
[Features]
· A rubber cover is used for the entire receiver, and an iron core is included inside.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 35.85 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Level Adjuster (Anchor Type) (KAF)
IMAO CORPORATION
[Features] The stainless steel type has excellent corrosion resistance and water resistance. Approved load: 5 kN.- Volume Discount
Configure nowStarting from∗ ： 19.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Anchor Fixing D-E II /D-E II-ST
DAIWARASHI
A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
[Features]
· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
· Can easily be fixed using an anchor bolt.
· Please use an anchor bolt.
· Please use a 12 mm anchor bolt.
· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
· Note: The screw rotates and tilts somewhat.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 17.43 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster, Screw Part Non-Shake, Standard Receiver Type D-J-A
DAIWARASHI
A standard receiver type adjuster in which the horizontal shaking of the screw shaft part is completely locked.
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 14.95 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Slopes, for Anchor Fixing D-U-E II
DAIWARASHI
An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."
[Features]
· The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
· The spherical structure is divided into a sphere and a receiver.
· The receiver has undergone spherical processing to enable the sphere to moves smoothly.
· M12/M16/M20 bolts can be used.
· The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 28.14 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Heavy Weights D-C / D-C / S
DAIWARASHI
A standard type adjuster for heavy loads
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 19.14 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Heavy Weights with Rubber D-C-R
DAIWARASHI
A rubber equipped type adjuster for medium loads
[Features]
· Receiver features a chloroprene rubber coating.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 21.00 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Heavy Weights (Bearing Equipped) D-H
DAIWARASHI
An adjuster for heavy weights with a built-in thrust bearing
[Features]
· Suitable for the adjustment of heavy machinery.
· Stability is outstanding since a large diameter bolt is used.
· Smooth adjustments can be made even for non-heavy machinery.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 86.24 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S
DAIWARASHI
A long screw adjuster with a wide adjustment range
[Features]
· Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
A limited quantity of 500 mm total length products are available for M16 and M20.
· D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 33.35 € Special price Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster with Rubber for Heavy Weights (Thrust Bearing Equipped) WD-C-R
DAIWARASHI
A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling
[Features]
· Receiver features a chloroprene rubber coating.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 49.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster with Rubber for Heavy Weights (Wide Receiver Type) D-C III-R
DAIWARASHI
A wide base type adjuster for medium loads with rubber. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver features a chloroprene rubber coating and the rear side of the rubber has undergone groove processing to make it resistant to slipping.
· Has a larger outer diameter than D-C-R and feels more stable and heavy.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 37.47 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Standard Receiver Adjuster with Plastic D-A II /D-B II
DAIWARASHI
A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
[Features]
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 15.78 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Standard Receiver Adjuster, Small Diameter Type D-F / D-F-C
DAIWARASHI
An adjuster whose screw and base have small diameters
[Features]
· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
· A light load type with a receiver diameter that is also small.
· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 5.60 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjuster for Walls D-D I
DAIWARASHI
A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
[Features]
· A special adjuster for walls.
· Please use together with D-D II.
· Please use accessories such as hex nuts, etc.
· The portion that makes contact with the wall is folded.
· As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
· In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
· Please refer to the drawings for use.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 24.51 € Special price Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Level Adjuster (KA)
IMAO CORPORATION
[Features] The stainless steel type has excellent corrosion and water resistance. Approved load: 3 kN, 5 kN.- Volume Discount
Configure nowStarting from∗ ： 8.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Adjusting Bolt Shape Type |
| Swivel Angle θ(deg) |
| Mounting Shape Type |
| Height Adjusting Handle |
| Thread Material |
| Thread Surface Treatment |
| Body Material |
| Main Body Surface Treatment |
| Bottom Rubber Material |
| Thread Length L1(mm) |
| Main Body Height h(mm) |
| Thread Nominal M(mm) |
| Properties |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | IMAO CORPORATION | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | IMAO CORPORATION |
| Product Series | Adjuster for Heavy Weights (Wide Receiver Type) D-C III /D-C III/S / D-C III-W | Adjuster, Screw Part Non-Shake, Standard Receiver Type D-J-A | Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S | Adjuster with Rubber for Heavy Weights (Thrust Bearing Equipped) WD-C-R | Adjuster with Rubber for Heavy Weights (Wide Receiver Type) D-C III-R | ||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Starting from∗ | 8.54 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 33.18 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 10.07 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 41.31 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 35.85 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 19.75 € *Unit price with basic configuration Volume Discount | 17.43 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 14.95 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 28.14 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 19.14 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 21.00 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 86.24 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 33.35 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 49.08 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 37.47 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 15.78 € *Unit price with basic configuration Volume Discount | 5.60 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 24.51 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.22 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | 5 Days | Same day | Same day | Same day | 6 Days | Same day | Same day | Same day | Same day | Same day | Same day | 5 Days | Same day | Same day | 5 Days | Same day | 5 Days | 6 Days |
| Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type |
| Adjusting Bolt Shape Type | Standard | Rubber Foot & Anchor Bolt Fixing Type | With Rubber Foot | Standard | With Rubber Foot | Standard | Rubber Foot & Anchor Bolt Fixing Type | Standard | Rubber Foot & Anchor Bolt Fixing Type | Standard | With Rubber Foot | Built-in Bearing | Standard | Built-in Bearing | With Rubber Foot | Standard | Standard | Anchor Bolt Fixing Type | Standard |
| Swivel Angle θ(deg) | - | - | - | - | - | - | - | - | 35 | - | - | - | - | - | - | - | - | - | - |
| Mounting Shape Type | - | - | - | - | - | Metal Mount Type | - | - | - | - | - | - | - | - | - | - | - | - | Metal Mount Type |
| Height Adjusting Handle | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Thread Surface Treatment | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others |
| Body Material | - | - | - | Stainless Steel | Synthetic Rubber (EPDM Synthetic Rubber) | Stainless Steel | - | - | - | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | - | - | Stainless Steel |
| Main Body Surface Treatment | Others | Others | Others | Others | Not Provided | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others |
| Bottom Rubber Material | - | - | Chloroprene Rubber / Ethylene Propylene Rubber / Silicone | - | - | - | - | - | - | - | Chloroprene Rubber | - | - | Chloroprene Rubber | Chloroprene Rubber | ABS Resin | ABS Resin | - | - |
| Thread Length L1(mm) | 50 ～ 200 | 100 ～ 150 | 50 ～ 180 | 100 ～ 200 | 130 | 100 ～ 200 | 50 ～ 200 | 100 ～ 150 | 150 | 50 ～ 200 | 50 ～ 200 | 150 ～ 200 | 200 ～ 300 | 150 | 100 | 100 ～ 180 | 50 ～ 100 | 130 ～ 150 | 50 ～ 180 |
| Main Body Height h(mm) | 15 ～ 18 | 17 | 13 ～ 17 | 22 | 25 | 125 ～ 230 | 17 | 15 ～ 18 | 17 | 17 | 22 | 29.5 ～ 31.5 | 17 ～ 22 | 22 | 27 | 18 ～ 22 | 12.5 ～ 13.5 | 18 | 69 ～ 211 |
| Thread Nominal M(mm) | 12 ～ 20 | 12 ～ 16 | 8 ～ 20 | 16 ～ 24 | 20 | 12 ～ 20 | 12 ～ 16 | 12 ～ 16 | 12 | 12 ～ 20 | 12 ～ 20 | 20 ～ 24 | 12 ～ 24 | 20 | 16 | 12 ～ 16 | 8 ～ 10 | 16 | 8 ～ 20 |
| Properties | Standard / Corrosion Resistance | Corrosion Resistance / Vibration Control | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Standard / Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance |
| Swivel Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
- Adjusting Bolt Type
- Mounting Type
- Precision Instrument Type
- With Automatic Height Adjusting Function
- Leg End
- Others
- Adjusting Screw with Rubber Grommet
-
Adjusting Bolt Shape Type
-
Swivel Angle θ(deg)
-
Mounting Shape Type
-
Height Adjusting Handle
-
Thread Material
-
Thread Surface Treatment
-
Body Material
-
Main Body Surface Treatment
-
Bottom Rubber Material
-
Thread Length L1(mm)
- 5
- 7
- 9
- 11
- 11.5
- 11.6
- 13.5
- 14
- 15
- 16
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 38.5
- 39.5
- 40
- 41
- 43
- 43.5
- 45
- 45.5
- 47
- 48.5
- 49
- 49.5
- 50
- 51
- 52
- 52.5
- 53
- 54
- 55
- 56
- 58
- 58.5
- 59.5
- 60
- 61
- 62
- 63
- 63.5
- 65
- 65.5
- 66
- 67
- 67.5
- 68
- 68.5
- 69
- 69.5
- 70
- 71
- 72
- 75
- 78
- 79
- 80
- 85
- 90
- 91
- 93.5
- 95
- 95.5
- 97
- 98
- 99
- 99.5
- 100
- 103.5
- 104
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 143.5
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 225
- 250
- 280
- 300
-
Main Body Height h(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 11.5
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 58~70
- 60
- 60.5
- 61
- 62
- 63
- 64
- 64.5
- 65
- 65~79
- 65.5
- 66
- 67
- 67.5
- 68
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 77
- 77.5
- 78
- 78.5
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 85.5
- 87
- 88
- 89
- 90
- 92
- 93
- 93.5
- 94
- 95
- 97
- 98
- 99
- 100
- 101
- 101.5
- 105
- 107
- 110
- 112
- 115
- 117.5
- 119
- 121
- 123
- 125
- 127
- 128
- 130
- 131
- 140
- 142
- 143
- 144
- 145
- 150
- 153
- 154
- 156
- 157
- 158
- 160
- 161
- 165
- 166
- 170
- 171
- 173
- 175
- 177
- 178
- 180
- 181
- 185
- 190
- 207
- 208
- 210
- 211
- 225
- 227
- 228
- 230
- 231
- 245
-
Thread Nominal M(mm)
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistant
- Electrical Conductivity
-
Swivel Mechanism
Brand
-
- MISUMI (0)
- DAIWARASHI (17)
- IMAO CORPORATION (2)
- ESCO (0)
- WOOJIN (0)
- RICH ENGINEERIN (0)
- EUROFLEX (0)
- GIFU SANKEN KOGYO (0)
- MAEDLER (0)
- AMF (0)
- IWATA MFG (0)
- SHIMIZU (0)
- 999SHIMANO (0)
- SUNCO (0)
- YAHATA NEJI (0)
- NANSIN (0)
- SUN FASTENER (0)
- GANTER (0)
- NABEYA (0)
- ELESA (0)
- TRUSCO NAKAYAMA (0)
- WAKISANGYO (0)
- KIPP (0)
- NORELEM (0)
- KURASHIKI KAKO (0)
- HALDER (0)
- OHNORUBBER (0)
- TAKIGEN (0)
- NABEYA BI-TECH (0)
CAD data type
-
- 2D
- 3D
Categories related to Adjuster
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.