Clamping Knobs（Mounting Section Diameter d(mm) and/or Diameter：M10）

Shipping Days	All Same day 1 Day or Less 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less

?* Information on days to ship and prices

• • Recommendation

  

  Star Grip, Screw Included Stainless Steel

  HALDER

  [Features] Handle in the shape of an easy-grip knob. [Material] Stainless steel 1.4301 (corresponds to EN 1.4301 Equiv. (sintered)).

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.79 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024
  • Recommendation

  

  Star Grip DIN6336, Aluminum

  HALDER

  [Features] Easy-to-grip star-shaped knob. [Material] Aluminium.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Longhead Knurled Bolt DIN464

  HALDER

  [Features]
  · Machined from a single piece. Differing from DIN specifications, screw outer diameter is machined to the bottom of the neck but relief processing is performed at the end of the thread.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.35 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  VCT. - Lobe knobs -Technopolymer

  ELESA

  Five-lobe knobs.
  Glass-fibre reinforced polyamide based (PA) technopolymer or polypropylene based (PP) technopolymer.
  Coloured caps for customisation and aesthetics.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Star Grip Screw Included DIN6336, Plastic

  HALDER

  [Features]
  · Operating temperature range: maximum 110°C

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.05 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  B.193 - Knurled grip knobs -Duroplast

  ELESA

  Phenolic based duroplast knurled knob.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Flat Knurled Bolt DIN653

  HALDER

  [Features]
  · Machined from a single piece. Thread outer diameter machined up to the neck (DIN Type A).

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.65 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  VC.692 - Lobe knobs with solid section -Technopolymer easy cleaning

  ELESA

  Five-lobe knob with solid section.
  Glass-fibre reinforced polyamide based technopolymer.
  The exclusive five-lobe shape offers the operator's fingers a proper grip and prevents unhealthy residues from depositing thanks to its solid shape without cavities.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.97 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Knurled Thumb Knob TKS, TKN, TKS-sus, TKN-sus

  KONISHI MFG

  Knob with round knurl on the outer part of the knob. We have external threads and female threads, and are also nickel chrome plated and stainless steel products.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Longhead Knurled Nut DIN466

  HALDER

  [Features] Hand-tightened nut with anti-slip grooves. -Round type is cylindrical.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.98 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Knurled Thumb Knob (TKN, TKS)

  IMAO CORPORATION

  It is a knob with a flat side knurled shape and a slip resistant design.
  
  [Features]
  · Ideal for panel securing

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ball knobs smooth DIN 319 enhanced, Form C, with molded thread (K0159)

  KIPP

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · Form C: moulded thread
  
  · Different thread sizes

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.67 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  BT. - Fluted grip knobs -Technopolymer

  ELESA

  Polyamide based technopolymer fluted grip knob.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Stainless Steel Long Knob (LKN-SUS, LKS-SUS)

  IMAO CORPORATION

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Star Grip Stainless Steel, Machined

  HALDER

  [Features]
  · Shape without any places dust or filth to get caught and so is optimal for areas with stringent cleanliness conditions (for example foodstuff machinery).

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.25 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Palm Grip With Thrust Bearing

  HALDER

  [Features]
  · Through reduction of friction on the seat surface, double the tightening force achieved with the same size of lever.
  · No scratches formed on the applicable parts as the seat surface does not move.
  · High pretension force applied to the screw part so does not loosen readily.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.10 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Knurled screws, Steel / Stainless Steel

  GANTER

  Knurled screws DIN 464 are machined from solid bar.
  Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.
  The official standard sheet also provides for the sizes M1 / M1,2 / M1,6 / M2 and M2,5.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Seven Lobe Knob SLK-T

  KONISHI MFG

  It is made of matte black nylon (glass fiber reinforced) resin. Operating temperature max80° C min-20° C
  
  [Features]
  · Made of matte black nylon (glass fiber reinforced) resin.
  · Operating temperature is max80° C, min-20° C

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.90 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  T Grip

  HALDER

  [Features] Suitable for frequent donning and doffing. [Material] Aluminium.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.67 €
  	Special price
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Palm Grip DIN6335, Aluminum

  HALDER

  [Features] Cross-shaped knob with handle. [Material] Aluminium.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Palm Grip DIN6335, Plastic

  HALDER

  [Features] Operating temperature range up to 110°C. -The main body material is a thermosetting resin DIN7708 PF31.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Star Grip DIN6335, Stainless Steel, Precision Cast

  HALDER

  [Features] Easy to grip star-shaped knob. [Stainless steel.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  L.652 - T-Handles -Technopolymer

  ELESA

  T-Handles
  Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
  Tensile stress
  Brass boss, plain blind hole or threaded hole or with zinc-plated steel threaded stud.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.18 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  VCT-LP - Lobe knobs -with retaining chain technopolymer

  ELESA

  Five-lobe knobs with retaining chain.
  Polypropylene based technopolymer.
  Ball cable and coupling heads in acetal resin based technopolymer
  NERINOX treated stainless steel ring with two coils.
  The elastic fork, housed in the groove of the knob can turn freely.
  Suitable where it is necessary to prevent the loss of the knob.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.54 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Star Grip DIN6336, Cast Iron

  HALDER

  [Features]
  · Sandblasted or tumbled
  · Special specification such as additional hole sizes and surface treatment are provided.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Quick Clamp Knob_KQC

  NABEYA BI-TECH

  Even long screws can be tightened quickly.
  
  [Features]
  · It can be tightened quickly, even with long screws.
  · Please screw in the screw vertically straight into a hole and tighten it.
  · If the tightening length (A) of the screw is shorter than the extension height (H), you can not achieve sufficient tightness.
  · When designing, please ensure the screw tightening length (A) is not less than the total height (H) of the knob

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tomy Screw DIN6304, With Securing Lever

  HALDER

  [Features]
  · Bar is press fit.
  [Applications]
  · Tomy screw that matches the thrust pad DIN6311 shape S, EH22560.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  VC.192 - Lobe knobs -Duroplast easy cleaning

  ELESA

  Duroplast Five-lobe knobs.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.93 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Stainless Steel Cross Knob (CK-SUS)

  IMAO CORPORATION

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Grill Knob GK

  KONISHI MFG

  It is a beautiful knob with a small square cut. Matte black nylon resin made male screw. Operating temperature max80° C min-20° C

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.07 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Palm Grip Screw Included DIN6335, Plastic

  HALDER

  [Features]
  · Operating temperature range: maximum 110°C

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.70 €
  	Special price
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  EKK. - Knurled grip knobs -Technopolymer

  ELESA

  Knurled knobs
  Glass-fibre reinforced polyamide based (PA) technopolymer.
  Brass boss, threaded blind hole or zinc-plated steel threaded stud.
  Ergostyle colours, matte finish.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.29 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  T-grips stainless steel (K1203)

  KIPP

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · Advantage: high manual tightening forces
  
  · Stainless steel 1.4308, abrasive blasted or electropolished

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Knurled Knob_KNM / KNF

  NABEYA BI-TECH

  Standardized steel and stainless steel product.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Knurled Knob with Steps

  TRUSCO NAKAYAMA

  ● It is a stepped type knurled knob.
  ● Knurled processing makes it hard to slip and it tightens quickly.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.01 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tomy Screw DIN6306, With Movable Lever

  HALDER

  [Features]
  · Bar is movable; stopped by spring pressure.
  [Applications]
  · Tomy screw that matches the thrust pad DIN6311 shape S, EH22560.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.01 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Star Grip Stainless Steel, Weldable Type

  HALDER

  [Features] Handle in the form of an easy-to-grip knob. [Material] Stainless steel 1.4301 (corresponds to EN 1.4301 Equiv. (sintered)).

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.88 €
  	Special price
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  B.259 - Knurled grip knobs -Duroplast

  ELESA

  Phenolic based duroplast knurled knob.
  B.259-CLEAN knob, thanks to its white colour and glossy finish, is particularly suitable for applications on medical and hospital equipment and on food processing machines whose parts, for hygienic reasons, must be frequently cleaned.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  EWNM-SST - Wing nuts -Stainless steel

  ELESA

  AISI 304 stainless steel wing nut, sandblasted matte finish.
  The slightly concave marks on the wings help to position the fingers in order to apply the maximum force when tightening.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  I.280 - Cylindrical handles -Duroplast

  ELESA

  Cylindrical handles.
  Phenolic based (PF) Duroplast, black colour, glossy finish.
  Threaded blind hole or zinc-plated steel threaded stud.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  VC.254 - Lobe knobs -Duroplast

  ELESA

  Duroplast Five-lobe knobs.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.72 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• 

  Mushroom knobs internal thread (K0250)

  KIPP

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · Versions: steel, stainless steel or aluminium
  
  · Different thread sizes

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Mushroom knobs male thread with high head for Hygienic USIT sealing and shim washer Freudenberg Process Seals (K1309)

  KIPP

  · Particularly suitable for the hygienic sector
  
  · Ideal for manual pull and push movements
  
  · High-gloss polished surface (Ra 0.8 µm) ensures easy cleaning
  
  · Perfect sealing in combination with the disc (K1326)
  
  · Material: stainless steel 1.4404, very good corrosion resistance

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Star grips similar to DIN 6336, internal thread with cap, Form K (K0155)

  KIPP

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · Form K: internal thread with cap
  
  · Cap in various colour combinations

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.79 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Clamp Knob_KXM / KXF

  NABEYA BI-TECH

  Normally, the knob rotates free with no serration connected. If you hold down the knob, the serrations will engage and the screw can be adjusted.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.99 €
  	Special price
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

Loading...