Clamping Knobs（Page 2）

1,175

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less

?* Information on days to ship and prices

Promotional pricing

Knurled screws, Steel / Stainless Steel

GANTER

Knurled screws DIN 464 are machined from solid bar.
Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.
The official standard sheet also provides for the sizes M1 / M1,2 / M1,6 / M2 and M2,5.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.10 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Star knobs with threaded bolt AISI 304

GANTER

The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
This form gives these grips an appealing look and additionally allows a high torque to be achieved.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	11.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Clamp Knob_KXM / KXF

NABEYA BI-TECH

Normally, the knob rotates free with no serration connected. If you hold down the knob, the serrations will engage and the screw can be adjusted.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	28.16 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Knurled Nut (Black Triclin Oxide Coating) KNTA-B, KNTB-B

KONISHI MFG

Knob with round knurl on the outer part of the knob. The surface treatment is black.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Longhead Knurled Nut DIN466

HALDER

[Features] Hand-tightened nut with anti-slip grooves. -Round type is cylindrical.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.53 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Star knobs with pivot

GANTER

Star knobs GN 6336.10 with brass or plastic thrust pad are used when indentations or damage is to be avoided.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.70 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Star knobs, Plastic

GANTER

Star knobs DIN 6336 with bore H7 are available under code GN 6336.1 and GN 6336.2.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.90 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Star knobs, plastic, with threaded bolt steel

GANTER

Star knobs GN 6336.4 comply with DIN 6336 type L.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.76 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Waist shaped knobs, Steel

GANTER

Waist shaped knobs GN 75 boast a compact and timeless design.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.62 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

VC.692 - Lobe knobs with solid section -Technopolymer easy cleaning

ELESA

Five-lobe knob with solid section.
Glass-fibre reinforced polyamide based technopolymer.
The exclusive five-lobe shape offers the operator's fingers a proper grip and prevents unhealthy residues from depositing thanks to its solid shape without cavities.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.12 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Mushroom knobs internal thread (K0250)

KIPP

· Can be used as a clamping, retaining and fastening element

· Application fields: machine, plant and fixture construction, toolmaking

· For manually adjusting assemblies, machines and aggregates

· Versions: steel, stainless steel or aluminium

· Different thread sizes

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.68 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stainless Steel Knobs / Round Knob

MISUMI

[Features] A stainless steel round knob. -The type of mounting part is a female thread.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.56 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

for Socket Head Cap Screws

for Socket Head Cap Screws【10 Pieces Per Package】

MISUMI

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	10.33 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Plastic Cross Knob_KJM / KJF

NABEYA BI-TECH

The shape can handle a lot of force.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.09 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Palm Grip With Thrust Bearing

HALDER

[Features]
· Through reduction of friction on the seat surface, double the tightening force achieved with the same size of lever.
· No scratches formed on the applicable parts as the seat surface does not move.
· High pretension force applied to the screw part so does not loosen readily.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.30 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Flat Knurled Nut DIN467

HALDER

[Features] Hand-tightened nut with anti-slip grooves. -The round type is cylindrical.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Screw (Urea Screw) EA949TP-132

Screw (Urea Screw) EA949TP-132【6 Pieces Per Package】

ESCO

【Product Specifications】
・Material-Knob： Urea resinScrew： Steel (trivalent chromate)
・Dim. (mm)…M3 x 8
・Color…White

Select to compare

Configure now
Starting from^∗ ：	4.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Quick release toggle nuts

GANTER

Quick release toggle nuts GN 6305.1 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
Plug the toggle nut onto the threaded bolt at an oblique angle. During the clamping action, it engages into the threads of the bolt.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	19.20 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tommy screws, with movable bar

GANTER

The thrust point of these screws DIN 6306 is designed to be used with or without the thrust pad for clamping.
The snap ring is a simple and quick method to connect the thrust pad to the tommy screw.
Instead of DIN 6311 a thrust pad GN 6311.1 can be used. In that case the tommy screw and the thrust pad have to be ordered separately.
The movable bar of the tommy screw DIN 6306 is held in any position by the pressure spring.
The end caps are pressed on to the bar and thus limit the bar travel, they can also be supplied separately should the bar be plated first.The official DIN standard sheets provides for steel rings at this point.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.00 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

MBT. - Diamond cut knurled knobs -Technopolymer

ELESA

Diamond cut knurled knob in high-resilience polypropylene based (PP) technopolymer.
Technopolymer coloured centre cap in Elecolors colours.
The fine pitch knurling on the outside rim of the knob, allows a safe and comfortable grip, offering the operator the possibility of operating under the most different working conditions in a sensitive and ergonomic way and simplifying the adjustment of the knob during rapid rotation without any unpleasant angular work for the hand and wrist.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.09 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

VB.639 - Three-arm knobs -Technopolymer

ELESA

Three-arm knob.
Glass-fibre reinforced polyamide based (PA) technopolymer or glass-fibre reinforced polypropylene based (PP) technopolymer.
Designed for heavy duty work for a firmer clamping action.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.54 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

VCR.192 - Shortened lobe knobs -Duroplast square hole

ELESA

Shortened five-lobe knob in phenolic-based duroplast with square pass-through hole with brass insert.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.70 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

VCRT. - Shortened lobe knobs -Technopolymer square or threaded hole

ELESA

Shortened five-lobe knob with square through hole with brass reinforcement or brass boss.
Glass-fibre reinforced polyamide based technopolymer.
On request, polypropylene-based technopolymer CA.VCT boss cap, in Elecolors colours, press-fit assembly.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.18 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Hand knobs, casting only

GANTER

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.82 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Ball knobs smooth DIN 319 enhanced, Form C, with molded thread (K0159)

KIPP

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Knurled torque knobs external thread (K0277)

KIPP

· Can be used as a clamping, retaining and fastening element

· Application fields: machine, plant and fixture construction, toolmaking

· For manually adjusting assemblies, machines and aggregates

· The NOVO grip product range represents an attractive design and an easy-to-grip form

· The setscrew sets the torque

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	32.71 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Knurled Knobs / Straight Cut

MISUMI

[Features] A knurled round knob. -The knobs are available in black and white.

Volume Discount

Order quantities extended (D-JIT)
Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.33 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Large Diameter Knurled Knobs

MISUMI

[Features] A large diameter round knurled screw. [Material] Nylon 6 (matt black).

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.90 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Super Knobs

MISUMI

[Features] This is a polygonal super knob. -The type of mounting part is a round hole.

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Knurled Knobs / Flat Head Screwdriver

MISUMI

[Features] A round knurled knob. -As an additional feature, it is slotted.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Plastic Ball_PB / PC

NABEYA BI-TECH

Two color variations. It is made of thermosetting resin. It has excellent durability.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.69 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel Hand Knob_KSH

NABEYA BI-TECH

It is made of stainless steel and has excellent corrosion resistance.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	23.98 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Plastic Wing Knob_KEM / KEF

NABEYA BI-TECH

Plastic T-shaped knob.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.37 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel Long Knob (LKN-SUS, LKS-SUS)

IMAO CORPORATION

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.50 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

T Grip

HALDER

[Features] Suitable for frequent donning and doffing. [Material] Aluminium.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	10.69 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Palm Grip DIN6335, Cast Iron, Resin Coating

HALDER

[Features] Grip-type, cross-shaped knob. [Material] Grey cast iron EN-JL 1030 Equiv...

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.91 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Flat Knurled screws, Stainless Steel

GANTER

All Stainless Steel-Flat knurled screws DIN 653 are produced from one piece and threaded over its full length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.48 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hand knobs, Aluminum

GANTER

Hand knobs, Aluminum

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.36 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hand knobs, Aluminum with Stainless Steel-Threaded bolt

GANTER

Hand knobs, Aluminum with Stainless Steel-Threaded bolt

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	13.52 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Knurled screws with recessed stud for loss prevention

GANTER

Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.22 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Star knobs with loss protection

GANTER

Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Star knobs with stainless steel insert

GANTER

Star knobs with stainless steel insert

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.10 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs, Aluminum

GANTER

Star knobs GN 5336 are forged, therefore a close grain structure is maintained providing a high tensile strength and a smooth surface.
Original ELESA design, now produced in metal in agreement with ELESA s.p.a.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.76 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Star knobs, Aluminum with Stainless Steel-Threaded bolt

GANTER

Star knobs, Aluminum with Stainless Steel-Threaded bolt

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	13.52 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

B.193 - Knurled grip knobs -Duroplast

ELESA

Phenolic based duroplast knurled knob.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Main Body Type
Mounting Section Type
Mounting Section Diameter d(mm) and/or Diameter
Mounting Section Length L(mm)
Round Type Category
Side Machining
Polygon, type
T Shaped Kind
Additional Function
Male Tip Machining
Female Thread, Round hole processing
Set Screw Thread Machining
Main Body Material
Main Body Surface Treatment
Mounting Section Material
Mounting Section Surface Treatment

	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing
Brand	GANTER	GANTER	NABEYA BI-TECH	KONISHI MFG	HALDER	GANTER	GANTER	GANTER	GANTER	ELESA	KIPP	MISUMI	MISUMI	NABEYA BI-TECH	HALDER	HALDER	ESCO	GANTER	GANTER	ELESA	ELESA	ELESA	ELESA	GANTER	KIPP	KIPP	MISUMI	MISUMI	MISUMI	MISUMI	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	IMAO CORPORATION	HALDER	HALDER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	ELESA
Product Series	Knurled screws, Steel / Stainless Steel	Stainless Steel-Star knobs with threaded bolt AISI 304	Clamp Knob_KXM / KXF	Knurled Nut (Black Triclin Oxide Coating) KNTA-B, KNTB-B	Longhead Knurled Nut DIN466	Star knobs with pivot	Star knobs, Plastic	Star knobs, plastic, with threaded bolt steel	Waist shaped knobs, Steel	VC.692 - Lobe knobs with solid section -Technopolymer easy cleaning	Mushroom knobs internal thread (K0250)	Stainless Steel Knobs / Round Knob	for Socket Head Cap Screws【10 Pieces Per Package】	Plastic Cross Knob_KJM / KJF	Palm Grip With Thrust Bearing	Flat Knurled Nut DIN467	Screw (Urea Screw) EA949TP-132【6 Pieces Per Package】	Quick release toggle nuts	Tommy screws, with movable bar	MBT. - Diamond cut knurled knobs -Technopolymer	VB.639 - Three-arm knobs -Technopolymer	VCR.192 - Shortened lobe knobs -Duroplast square hole	VCRT. - Shortened lobe knobs -Technopolymer square or threaded hole	Stainless Steel-Hand knobs, casting only	Ball knobs smooth DIN 319 enhanced, Form C, with molded thread (K0159)	Knurled torque knobs external thread (K0277)	Knurled Knobs / Straight Cut	Large Diameter Knurled Knobs	Super Knobs	Knurled Knobs / Flat Head Screwdriver	Plastic Ball_PB / PC	Stainless Steel Hand Knob_KSH	Plastic Wing Knob_KEM / KEF	Stainless Steel Long Knob (LKN-SUS, LKS-SUS)	T Grip	Palm Grip DIN6335, Cast Iron, Resin Coating	Flat Knurled screws, Stainless Steel	Hand knobs, Aluminum	Hand knobs, Aluminum with Stainless Steel-Threaded bolt	Stainless Steel-Knurled screws with recessed stud for loss prevention	Star knobs with loss protection	Star knobs with stainless steel insert	Star knobs, Aluminum	Star knobs, Aluminum with Stainless Steel-Threaded bolt	B.193 - Knurled grip knobs -Duroplast
CAD		2D / 3D	2D / 3D	2D	3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	3D	3D		2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	3D	3D			2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D
Starting from^∗	1.10 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	11.94 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	28.16 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.38 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.53 € *Unit price with basic configuration	2.70 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.76 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.62 € *Unit price with basic configuration Volume Discount	1.12 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	4.68 € *Unit price with basic configuration	7.56 € *Unit price with basic configuration Volume Discount	10.33 € *Unit price with basic configuration	3.09 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	16.30 € *Unit price with basic configuration	0.42 € Special price *Unit price with basic configuration Promotional pricing	4.25 € *Unit price with basic configuration	19.20 € *Unit price with basic configuration Volume Discount	18.00 € *Unit price with basic configuration Volume Discount	2.09 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	4.54 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.70 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	2.18 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.82 € *Unit price with basic configuration Volume Discount	0.43 € *Unit price with basic configuration	32.71 € *Unit price with basic configuration	2.33 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.38 € Special price *Unit price with basic configuration Promotional pricing	3.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.69 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	23.98 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.37 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.50 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.69 € Special price *Unit price with basic configuration Promotional pricing	5.91 € Special price *Unit price with basic configuration Promotional pricing	2.48 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.36 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	13.52 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.22 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.30 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	2.10 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.76 € *Unit price with basic configuration Volume Discount	13.52 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.56 € Special price *Unit price with basic configuration Promotional pricing Volume Discount
Min. Shipping Days	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	4 Days	Same day	Same day	Same day	Same day	Same day	6 Days	7 Days	7 Days	Same day	Same day	Same day	Same day	7 Days	4 Days	4 Days	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	7 Days	Same day	Same day
Specifications												Order quantities extended (D-JIT)	Order quantities extended (D-JIT)														Order quantities extended (D-JIT) Stock	Order quantities extended (D-JIT)	Order quantities extended (D-JIT)
Main Body Type	Round shape	-	Polygon	Round shape	Round shape	-	-	-	-	-	-	Round shape	Round shape	Polygon	Butterfly Shaped	Round shape	-	-	-	-	-	-	-	-	-	-	Round shape	Round shape	Polygon	Round shape	Round shape	Polygon	T-Shaped	Round shape	T-Shaped	Butterfly Shaped	-	-	-	-	-	-	-	-	-
Mounting Section Type	Male thread (stepped)	-	Male thread / Female Thread	Female Screw (Stepped)	Female Thread	-	-	-	-	-	-	Female Thread	Press Fitting Type	Male thread / Female Thread	Male thread / Female Thread	Female Thread	-	-	-	-	-	-	-	-	-	-	Male thread / Male thread (stepped) / Female Thread / Female Screw (Stepped)	Male thread / Female Thread / Round Hole	Round Hole	Male thread	Female Thread	Male thread / Female Thread / Round Hole	Male thread / Female Thread	Male thread / Female Thread	Female Thread / Round Hole	Female Thread / Round Hole	-	-	-	-	-	-	-	-	-
Mounting Section Diameter d(mm) and/or Diameter	M2 ～ M10	-	M6 ～ M10	M5 ～ M12	M3 ～ M12	-	M 4 ～ M 16	-	-	M4 ～ M12	M2 ～ M10	4 ～ 8	3 ～ 8	M6 ～ M12	M6 ～ M12	M3 ～ M12	-	-	-	5 ～ M14	6 ～ M16	-	M8 ～ M16	-	M4 ～ M12	M5 ～ M8	3 ～ 8	5 ～ 12	6 ～ 12	3 ～ 6	M6 ～ M12	8 ～ M12	M4 ～ M8	M3 ～ M10	6 ～ M10	8 ～ M16	-	-	-	-	-	-	-	-	M3 ～ M12
Mounting Section Length L(mm)	4 ～ 40	20 ～ 50	11 ～ 50	7 ～ 14	-	10 ～ 55	-	10 ～ 70	-	6 ～ 70	-	-	-	10 ～ 40	15 ～ 50	-	-	-	40 ～ 90	10 ～ 50	20 ～ 40	-	-	-	-	-	10 ～ 25	10 ～ 50	-	6 ～ 30	10 ～ 18	15 ～ 50	10 ～ 32	6 ～ 40	-	-	-	-	20 ～ 55	15 ～ 42	-	-	-	20 ～ 55	6 ～ 40
Round Type Category	Cylindrical	-	-	Clamp Shape	Cylindrical	-	-	-	-	-	-	Cylindrical	Cylindrical	-	-	Cylindrical	-	-	-	-	-	-	-	-	-	-	Cylindrical	Cylindrical	-	Cylindrical	Ball	-	-	Cylindrical	-	-	-	-	-	-	-	-	-	-	-
Side Machining	Knurled	-	-	Knurled	-	-	-	-	-	-	-	N/A	Knurled	-	-	-	-	-	-	-	-	-	-	-	-	-	Knurled	Knurled	-	Knurled	-	-	-	Knurled	-	-	-	-	-	-	-	-	-	-	-
Polygon, type	-	-	Pentagon	-	-	-	-	-	-	-	-	-	-	Cross Shape	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Triangle / Pentagon	-	-	Pentagon	-	-	-	-	-	-	-	-	-	-	-	-	-
T Shaped Kind	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Wing	-	Wing	-	-	-	-	-	-	-	-	-	-
Additional Function	N/A	-	Other	N/A / Thread-Locker	-	-	-	-	-	-	-	N/A	N/A	N/A	-	-	-	-	-	-	-	-	-	-	-	-	N/A	N/A	N/A	With slotting	N/A	N/A	N/A	N/A	-	-	-	-	-	-	-	-	-	-	-
Male Tip Machining	N/A	-	N/A	-	-	-	-	-	-	-	-	-	-	N/A	N/A	-	-	-	-	-	-	-	-	-	-	-	N/A	N/A	-	N/A	-	N/A	N/A	N/A	-	-	-	-	-	-	-	-	-	-	-
Female Thread, Round hole processing	-	-	Blind Hole	Through	-	-	-	-	-	-	-	Blind Hole	-	Blind Hole	-	-	-	-	-	-	-	-	-	-	-	-	Blind Hole	Blind Hole	Through	-	Blind Hole	Blind Hole / Reamer Finish	Blind Hole	Blind Hole / Through	Blind Hole / Through	Blind Hole	-	-	-	-	-	-	-	-	-
Set Screw Thread Machining	N/A	-	-	N/A / Yes (1 Place)	-	-	-	-	-	-	-	N/A	-	-	-	-	-	-	-	-	-	-	-	-	-	-	N/A	N/A	N/A	-	-	N/A	-	-	-	-	-	-	-	-	-	-	-	-	-
Main Body Material	Stainless Steel / Steel	-	Nylon	Steel	Stainless Steel / Steel	-	Polypropylene	-	-	Stainless Steel / Polyamide	Stainless Steel / Steel / Aluminum	Stainless Steel	Polyacetal	Nylon	Nylon	Stainless Steel / Steel	-	Steel	-	Polyamide	Stainless Steel / Polyamide	Phenol	Polyamide	-	Other	Other	Nylon / ABS	Nylon	Nylon	Stainless Steel / Steel	Phenol / Melamine Resin	Stainless Steel	Nylon	Stainless Steel	Aluminum	Steel	Stainless Steel	Aluminum	-	Stainless Steel	-	Polypropylene	-	-	Stainless Steel / Phenol
Main Body Surface Treatment	Shot Blasted / Other	-	N/A	Black Oxide	Black Oxide / Sand blasted	-	-	-	-	-	-	Electrolytic Polishing	-	N/A	-	Black Oxide / Sand blasted	-	-	-	-	-	-	-	-	-	-	-	-	-	Trivalent Chromate / Brushed	N/A	Barrel Polishing	N/A	N/A	Paint	Paint	-	-	-	-	-	-	-	-	-
Mounting Section Material	Stainless Steel / Steel	-	Steel	Steel	-	-	-	-	-	-	-	-	-	Steel	-	-	-	-	-	-	-	-	-	-	-	-	Stainless Steel / Steel / Brass	Steel	-	-	Phenol / Brass / Other	Stainless Steel	Brass	Stainless Steel	-	-	-	-	-	-	-	-	-	-	-
Mounting Section Surface Treatment	Shot Blasted / Zinc Plating / Other	-	N/A / Black Oxide	Black Oxide	-	-	-	-	-	-	-	-	-	N/A / Trivalent Chromate	-	-	-	-	-	-	-	-	-	-	-	-	N/A / Trivalent Chromate	Trivalent Chromate / Black Oxide	-	-	N/A	N/A	N/A / Trivalent Chromate	N/A	-	-	-	-	-	-	-	-	-	-	-