Retaining Rings

141

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

1
2
3
4
Next >>

Promotional pricing

Retaining Rings / External / C-Type

MISUMI

[Features] C-shaped snap ring, external. -The purchase unit is loose (available in quantities of 1 pc.). -The snap ring type is an outer ring type snap ring.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.66 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

DIN 471 Retaining rings

REYHER

Circlips; Safety rings; Safety washers

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.03 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Retaining Rings / External / E-Type

MISUMI

[Features] An E-type retaining ring, external. -The purchase unit is loose (available in quantities of 1 pc.). -The retaining ring type is an external ring retaining ring.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.14 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Retaining Rings / Internal / C-Type

MISUMI

[Features] One C-type retaining ring, internal. -The purchase unit is loose (available in quantities of 1 pc.). -The retaining ring type is an internal ring retaining ring.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.66 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SEEGER Snap Rings, Type SW for Shafts

SEEGER-ORBIS

[Specifications]
・Type: SW
・Engineering material: Spring steel

SEEGER circlips to DIN 9927 and DIN 9928 for shafts and bores are among the retaining systems with the smallest radial width. They have a rectangular cross section and are mainly used in needle bearings, needle cages and sealing rings.

[Features]
・Securing needle bearings, needle cages and sealing elements

[Applications]
・Gear systems
・Assembly of couplings
・Used as spacer elements

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SEEGER Snap Rings, Type SB for Bores

SEEGER-ORBIS

[Specifications]
・Type: SB
・Engineering material: Spring steel

SEEGER circlips to DIN 9927 and DIN 9928 for shafts and bores are among the retaining systems with the smallest radial width. They have a rectangular cross section and are mainly used in needle bearings, needle cages and sealing rings.

[Features]
・Securing needle bearings, needle cages and sealing elements

[Applications]
・Gear systems
・Assembly of couplings
・Used as spacer elements

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SEEGER V-Rings, Type JV for Bores

SEEGER-ORBIS

[Specifications]
・Type: JV
・Engineering material: Spring steel

The Seeger-V-rings have a smaller radial width than the standard Seeger rings and also form a concentric shoulder with respect to the axis of the shaft or housing.

[Features]
・Axial securing and serve as radial guide in shafts

[Applications]
・In designs with small radial mounting heights
・For securing needle bearings and seals
・Also for use based on optical considerations in shafts

Select to compare

Configure now
Min. Shipping Days ：	4 Days

DIN 472 Retaining rings

REYHER

Circlips; Safety rings; Safety washers

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.03 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

SEEGER Retaining Rings, DIN 471, Type a for Shafts

SEEGER-ORBIS

[Specifications]
・Type: A
・Engineering material: Spring steel
・Norm: DIN 471

SEEGER rings according to DIN 471 and DIN 472 are suited for a versatile range of applications and are among the most frequently used retaining rings for axial securing.

[Features]
・For axially securing shafts

[Applications]
・Mechanical engineering
・Automotive engineering
・Gear systems
・Electrical engineering
・Precision mechanics
・Apparatus engineering

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Promotional pricing

DIN 7993 Snap rings

REYHER

[Specifications]
・Type: Axial Mount (Internal)
・Material: Spring steel
・Shape: C Type Retaining Ring with Uniform Section
・DIN 7993

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.09 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SEEGER Retaining Rings, DIN 472, Type J for Bores

SEEGER-ORBIS

[Specifications]
・Type: J
・Engineering material: Spring steel
・Norm: DIN 472

SEEGER rings according to DIN 471 and DIN 472 are suited for a versatile range of applications and are among the most frequently used retaining rings for axial securing.

[Features]
・Axial securing in bores

[Applications]
・Mechanical engineering
・Automotive engineering
・Gear systems
・Electrical engineering
・Precision mechanics
・Apparatus engineering

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SEEGER Round-Wire Snap Rings, DIN 9925 (Old 7993 A), Type RW for Shafts

SEEGER-ORBIS

[Specifications]
・Type: RW
・Engineering material: Spring steel
・Norm: DIN 9925

SEEGER circular wire circlips to DIN 9925 and 9926 are manufactured from patented hardened wires with round cross-section. They are primarily used in semi-circular grooves in conjunction with quarter-circle coverage of the located machine component.

[Features]
・Securing shafts with semi-circular grooves axially

[Applications]
・Securing gudgeon pins
・Gear systems
・Automotive engineering
・Fittings Industry
・Used as mounting aid component

Select to compare

Configure now
Starting from^∗ ：	0.06 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

C Type Retaining Ring (C Ring) (for Shaft)

C Type Retaining Ring (C Ring) (for Shaft)【1-100 Pieces Per Package】

TAIYO STAINLESS SPRING

Use as a retaining ring in shafts with a groove cut around the circumference (dedicated jig required).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.40 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

C-Shaped Retaining Ring (for Shaft)

C-Shaped Retaining Ring (for Shaft)【1-2,000 Pieces Per Package】

OCHIAI

Inserts into the groove that is machined in the shaft to prevent retained parts such as bearings from coming out in the direction of thrust (parallel to the shaft).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.06 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SEEGER V-Rings, Type AV for Shafts

SEEGER-ORBIS

[Specifications]
・Type: AV
・Engineering material: Spring steel

The Seeger-V-rings have a smaller radial width than the standard Seeger rings and also form a concentric shoulder with respect to the axis of the shaft or housing.

[Features]
・Axial securing and serve as radial guide in bores

[Applications]
・In designs with small radial mounting heights
・For securing needle bearings and seals
・Also for use based on optical considerations in shafts

Select to compare

Configure now
Starting from^∗ ：	0.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SEEGER Round-Wire Snap Rings, DIN 9926 (Old 7993 B), Type RB for Bores

SEEGER-ORBIS

[Specifications]
・Type: RB
・Engineering material: Spring steel
・Used as mounting aid component

SEEGER circular wire circlips to DIN 9925 and 9926 are manufactured from patented hardened wires with round cross-section. They are primarily used in semi-circular grooves in conjunction with quarter-circle coverage of the located machine component.

[Features]
・Axial securement in bores with semi-circular grooves

[Applications]
・Securing gudgeon pins
・Gear systems
・Automotive engineering
・Fittings Industry

Select to compare

Configure now
Starting from^∗ ：	0.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

DIN 6799 Retaining washers

REYHER

[Specifications]
・Type: Radial Mounting
・Shape: Retaining Rings-E Type
・Material: Spring steel
・DIN 6799

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SEEGER Retaining Rings, DIN 471, Type AS for Shafts, Reinforced Version

SEEGER-ORBIS

[Specifications]
・Type: AS
・Engineering material: Spring steel
・Norm: DIN 471

SEEGER rings according to DIN 471 and DIN 472 are suited for a versatile range of applications and are among the most frequently used retaining rings for axial securing.

[Features]
・Transmitting very high axial forces
・For use on spline shafts

Select to compare

Configure now
Starting from^∗ ：	0.25 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

C-Shaped Retaining Ring (for Hole)

C-Shaped Retaining Ring (for Hole)【1-2,000 Pieces Per Package】

OCHIAI

Inserts into the groove that is machined in the hole to prevent retained parts such as bearings from coming out in the direction of thrust (parallel to the shaft).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.07 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SEEGER K-Rings, DIN 983, Type AK for Shafts

SEEGER-ORBIS

[Specifications]
・Type: AK
・Engineering material: Spring steel
・Norm: DIN 983

SEEGER-K-Rings have several tabs uniformly distributed over their circumference. SEEGER K-Rings are suitable for concealed assembly.

[Features]
・For axially securing shafts

[Applications]
・Securing machine components with large edge spacings, chamfers or rounded contours
・Serve as spacers between pipes in heat exchangers

Select to compare

Configure now
Starting from^∗ ：	0.29 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

SEEGER Serrated Rings, Type ZA for Shafts

SEEGER-ORBIS

[Specifications]
・Type: ZA
・Engineering material: Spring steel

SEEGER circular self-locking rings have a concentric fit and a low radial height and can be used on shafts and in bores without a groove. The material of the shaft or housing must be softer than the ring‘s material.

[Features]
・For securing smooth shafts axially

[Applications]
・Use on shafts and bores without grooves or with grooves of a low depth
・Used in designs with a small radial mounting height
・For securing lenses and disks in optical devices
・For securing seals

Select to compare

Configure now
Starting from^∗ ：	0.11 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Snap Ring (for Shaft)

Snap Ring (for Shaft)【1-90 Pieces Per Package】

TRUSCO NAKAYAMA

The snap ring is provided with tabs (holes for pliers) for easy removal.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Circlips for shafts DIN 471 (07330)

NORELEM

· Axially mounted elements for shafts

· Transfers high axial forces

· Version: steel or stainless steel

Select to compare

Configure now
Starting from^∗ ：	0.15 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

SEEGER Lock Washers, DIN 6799, Type RA for Shafts

SEEGER-ORBIS

[Specifications]
・Type: RA
・Engineering material: Spring steel
・Norm: DIN 6799

In the radial installation, SEEGER retaining rings are installed in large quantities, especially with small bolt diameters, and enclose the groove with three tabs.

[Features]
・For axially securing shafts

[Applications]
・Alternative to standard rings if axial access is not possible
・Automotive engineering
・Electrical engineering
・Office machines
・Precision mechanics
・Optics industry

Select to compare

Configure now
Starting from^∗ ：	0.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SEEGER K-Rings, DIN 984, Type JK for Bores

SEEGER-ORBIS

[Specifications]
・Type: JK
・Engineering material: Spring steel
・Norm: DIN 984

SEEGER-K-Rings have several tabs uniformly distributed over their circumference. SEEGER K-Rings are suitable for concealed assembly.

[Features]
・Axial securing in bores

[Applications]
・Securing machine components with large edge spacings, chamfers or rounded contours
・Serve as spacers between pipes in heat exchangers

Select to compare

Configure now
Starting from^∗ ：	0.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SEEGER Retaining Rings, DIN 472, Type JS for Bores, Reinforced Version

SEEGER-ORBIS

[Specifications]
・Type: JS
・Engineering material: Spring steel
・Norm: DIN 472

SEEGER rings according to DIN 471 and DIN 472 are suited for a versatile range of applications and are among the most frequently used retaining rings for axial securing.

[Features]
・Transmitting very high axial forces
・Use in wedge bores (or multiple disc clutches)

Select to compare

Configure now
Starting from^∗ ：	0.32 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

E Type Retaining Ring (E Ring) JIS Standard, Stainless Steel (SUS304)

E Type Retaining Ring (E Ring) JIS Standard, Stainless Steel (SUS304)【1-5,000 Pieces Per Package】

TAIYO STAINLESS SPRING

[Features]
· Installed in a radial direction into a groove of a shaft to use as a removal prevention. Each standard can be selected according to the shaft size and outer diameter size. (Automatic insert type stack products are also available as per size).
· Size is compliant with JIS standard. Material can be selected depending on the compatibility with the mating shaft and operating environment.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.25 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Steel C Type Retaining Ring (for Shaft) (JIS Standard) Made by Iwata Denko Co., Ltd.

Steel C Type Retaining Ring (for Shaft) (JIS Standard) Made by Iwata Denko Co., Ltd.【1-1,000 Pieces Per Package】

IWATA DENKO

This is a high quality, high precision retaining ring engineered with advanced manufacturing technology under strict quality controls.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.33 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Round R-Shaped Retaining Ring (for Hole)

OCHIAI

Designed for shafts requiring a smaller inner diameter (outer diameter) clearance than the retaining ring, reducing interference with the retained part.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.14 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Retaining Ring Pliers

MISUMI

[Features] Circlip pliers. -Available in quantities of 1 piece. [Material] Steel.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	31.64 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

U Shaped Retaining Ring

OCHIAI

Enables higher thrust load due to more parts which contact the retaining ring in the groove.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Concentric Retaining Ring for Shaft (with Holes) (JIS Standard)

HEIWA HATSUJYO

[Type] Thrust direction-mounted (for shaft)
[Shape] C-shaped concentric retaining ring
[Material] Steel
[Sales unit] Sold individually (a single piece is available for purchase) applicable E ring size none
[Surface treatment] Parker
[Nominal] 50 55 56 60 70 75 85 90 shaft or hole applications d1 (ref.) (mm) 50 55 56 60 70 75 85 90 shaft or hole applications d2 (ref.) (mm) 47 52 53 60 67 72 81.5 86.5 internal diameter (d3) 46.3 51.3 52.3 56.3 66.0 71 80.1 85.1 thickness (t) 2 2.5

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.37 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

JIS Concentric Retaining Ring for Hole

JIS Concentric Retaining Ring for Hole【1-100 Pieces Per Package】

HEIWA HATSUJYO

[Type] Thrust direction-mounted (for hole)
[Shape] C-shaped concentric retaining ring
[Material] SWRH57 to 82A or its B equivalent retaining ring
[Type] Inner retaining ring mounting procedure
[Type] Standard product
[Type] Retaining ring
[Sales unit] Sold individually (a single piece is available for purchase) box/pack
[Shaft/hole/groove nominal diameter (reference) (mm)]26 37 52 55 56 62 68 72 75 80 90 100
[Groove width] 1.35 1.75 2.2 2.7 3.2

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	0.84 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Push Nut (for Shaft)

OCHIAI

The push nut is engineered with a series of angled prongs on its inner circumference whose edges catch onto the outer circumference of a shaft. Due to the shape of the prongs, the nut will not come off even if it is pushed from behind.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SEEGER Half Rings, Type H for Shafts

SEEGER-ORBIS

[Specifications]
・Type: H
・Engineering material: Spring steel
・Shaft diameter d1(mm): 3-40

SEEGER crescent rings are the only radially installed retaining rings designed in accordance with the classic SEEGER principle. SEEGER crescent rings are manufactured for shaft diameters up to 50 mm.

[Features]
・Radially installed ring for axially securing shafts

[Applications]
・Alternative to standard rings if axial access is not possible
・Universal-joint propeller shaft
・Internally securing the needle bushes
・For securing in flat link articulated chains

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SEEGER Serrated ring, type ZJ for Bores

SEEGER-ORBIS

[Specifications]
・Type: ZJ
・Engineering material: Spring steel

SEEGER circular self-locking rings have a concentric fit and a low radial height and can be used on shafts and in bores without a groove. The material of the shaft or housing must be softer than the ring‘s material.

[Features]
・Axial securing on bores

[Applications]
・Use on shafts and bores without grooves or with grooves of a low depth
・Used in designs with a small radial mounting height
・For securing lenses and disks in optical devices
・For securing seals

Select to compare

Configure now
Starting from^∗ ：	0.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Concentric Retaining Ring (for Shaft)

OCHIAI

[Type] Thrust direction-mounted (for shaft)
[Shape] C-shaped concentric retaining ring
[Material] Steel
[Surface treatment] None outer diameter (D/d3) 5.6 13.1 16 21.7 26.5 35.2 39.8 44.8 49.8 52.6 57.6 60.6 62.6 72.4 82 87 92 97 101.7 111.7 116.7 121.7 126.7 131.6 136.6 146.6 156.6 171.6 175.6 185.6 195.6 235.6 thickness: t 0.7 1.2 1.5 2.5 3

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.44 €
	Special price
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

SEEGER Snap Rings, DIN 5417, Type SP for Roller Bearings

SEEGER-ORBIS

[Specifications]
・Type: SP
・Engineering material: Spring steel
・Norm: DIN 5417

SEEGER circlips to DIN 5417 for shafts are designed for securing roller bearings in whose outer race a groove has been cut. Roller bearings to DIN 616 are mass-produced by manufacturers.

[Features]
・Securing roller bearings to DIN 616

[Applications]
・Roller bearing housings can be drilled through smoothly
・Roller bearing housings with short axial mounting length

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Circlips for bores DIN 472 (07331)

NORELEM

· Securing elements for holes

· Transfers high axial forces

· Version: steel or stainless steel

Select to compare

Configure now
Starting from^∗ ：	0.15 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Small Diameter C Type Retaining Ring (C Ring) for Hole

TAIYO STAINLESS SPRING

Used as a retaining ring in a hole with a circumferential groove on the inner diameter side of the hole (dedicated jig is required).
*CAD data for this series is being revised. Data will be made available as soon as modifications are complete.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.34 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

E-Type Retaining Ring (E-Ring) IWT

E-Type Retaining Ring (E-Ring) IWT【300 Pieces Per Package】

SUNCO

[Material] Steel "Nominal" NO.6.4. [Shape] Type E Retaining Ring

Select to compare

Configure now
Starting from^∗ ：	30.45 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Steel C Type Ring (for Shaft) (Iwata Standard) Made by Iwata Denko Co., Ltd.

Steel C Type Ring (for Shaft) (Iwata Standard) Made by Iwata Denko Co., Ltd.【1-1,000 Pieces Per Package】

IWATA DENKO

This is a high quality, high precision retaining ring engineered with advanced manufacturing technology under strict quality controls.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.55 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

E Type Retaining Ring (E Ring) JIS Standard, Stainless Steel (EN 1.4401 Equiv.)

E Type Retaining Ring (E Ring) JIS Standard, Stainless Steel (EN 1.4401 Equiv.)【2,000 Pieces Per Package】

TAIYO STAINLESS SPRING

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.88 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Round S-Shaped Retaining Ring (for Shaft)

OCHIAI

Designed for shafts requiring a smaller inner diameter (outer diameter) clearance than the retaining ring, reducing interference with the retained part.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.08 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Steel C Type Ring (for Hole) (JIS Standard) Made by Iwata Denko Co., Ltd.

Steel C Type Ring (for Hole) (JIS Standard) Made by Iwata Denko Co., Ltd.【1-1,000 Pieces Per Package】

IWATA DENKO

This is a high quality, high precision retaining ring engineered with advanced manufacturing technology under strict quality controls.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Type
Shape
Nominal
Material
Sales Unit
Retaining Ring Type
Mounting Method Type
Product Type

	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing
Brand	MISUMI	REYHER	MISUMI	MISUMI	SEEGER-ORBIS	SEEGER-ORBIS	SEEGER-ORBIS	REYHER	SEEGER-ORBIS	REYHER	SEEGER-ORBIS	SEEGER-ORBIS	TAIYO STAINLESS SPRING	OCHIAI	SEEGER-ORBIS	SEEGER-ORBIS	REYHER	SEEGER-ORBIS	OCHIAI	SEEGER-ORBIS	SEEGER-ORBIS	TRUSCO NAKAYAMA	NORELEM	SEEGER-ORBIS	SEEGER-ORBIS	SEEGER-ORBIS	TAIYO STAINLESS SPRING	IWATA DENKO	OCHIAI	MISUMI	OCHIAI	HEIWA HATSUJYO	HEIWA HATSUJYO	OCHIAI	SEEGER-ORBIS	SEEGER-ORBIS	OCHIAI	SEEGER-ORBIS	NORELEM	TAIYO STAINLESS SPRING	SUNCO	IWATA DENKO	TAIYO STAINLESS SPRING	OCHIAI	IWATA DENKO
Product Series	Retaining Rings / External / C-Type	DIN 471 Retaining rings	Retaining Rings / External / E-Type	Retaining Rings / Internal / C-Type	SEEGER Snap Rings, Type SW for Shafts	SEEGER Snap Rings, Type SB for Bores	SEEGER V-Rings, Type JV for Bores	DIN 472 Retaining rings	SEEGER Retaining Rings, DIN 471, Type a for Shafts	DIN 7993 Snap rings	SEEGER Retaining Rings, DIN 472, Type J for Bores	SEEGER Round-Wire Snap Rings, DIN 9925 (Old 7993 A), Type RW for Shafts	C Type Retaining Ring (C Ring) (for Shaft)【1-100 Pieces Per Package】	C-Shaped Retaining Ring (for Shaft)【1-2,000 Pieces Per Package】	SEEGER V-Rings, Type AV for Shafts	SEEGER Round-Wire Snap Rings, DIN 9926 (Old 7993 B), Type RB for Bores	DIN 6799 Retaining washers	SEEGER Retaining Rings, DIN 471, Type AS for Shafts, Reinforced Version	C-Shaped Retaining Ring (for Hole)【1-2,000 Pieces Per Package】	SEEGER K-Rings, DIN 983, Type AK for Shafts	SEEGER Serrated Rings, Type ZA for Shafts	Snap Ring (for Shaft)【1-90 Pieces Per Package】	Circlips for shafts DIN 471 (07330)	SEEGER Lock Washers, DIN 6799, Type RA for Shafts	SEEGER K-Rings, DIN 984, Type JK for Bores	SEEGER Retaining Rings, DIN 472, Type JS for Bores, Reinforced Version	E Type Retaining Ring (E Ring) JIS Standard, Stainless Steel (SUS304)【1-5,000 Pieces Per Package】	Steel C Type Retaining Ring (for Shaft) (JIS Standard) Made by Iwata Denko Co., Ltd.【1-1,000 Pieces Per Package】	Round R-Shaped Retaining Ring (for Hole)	Retaining Ring Pliers	U Shaped Retaining Ring	Concentric Retaining Ring for Shaft (with Holes) (JIS Standard)	JIS Concentric Retaining Ring for Hole【1-100 Pieces Per Package】	Push Nut (for Shaft)	SEEGER Half Rings, Type H for Shafts	SEEGER Serrated ring, type ZJ for Bores	Concentric Retaining Ring (for Shaft)	SEEGER Snap Rings, DIN 5417, Type SP for Roller Bearings	Circlips for bores DIN 472 (07331)	Small Diameter C Type Retaining Ring (C Ring) for Hole	E-Type Retaining Ring (E-Ring) IWT【300 Pieces Per Package】	Steel C Type Ring (for Shaft) (Iwata Standard) Made by Iwata Denko Co., Ltd.【1-1,000 Pieces Per Package】	E Type Retaining Ring (E Ring) JIS Standard, Stainless Steel (EN 1.4401 Equiv.)【2,000 Pieces Per Package】	Round S-Shaped Retaining Ring (for Shaft)	Steel C Type Ring (for Hole) (JIS Standard) Made by Iwata Denko Co., Ltd.【1-1,000 Pieces Per Package】
CAD	2D / 3D		2D / 3D	2D / 3D																										2D / 3D
Starting from^∗	0.66 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.03 € *Unit price with basic configuration Volume Discount	0.14 € *Unit price with basic configuration Volume Discount	0.66 € *Unit price with basic configuration Volume Discount	-	-	-	0.03 € *Unit price with basic configuration Volume Discount	-	0.09 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	-	0.06 € *Unit price with basic configuration	0.40 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.06 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.46 € *Unit price with basic configuration	0.05 € *Unit price with basic configuration	0.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.25 € *Unit price with basic configuration	0.07 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.29 € *Unit price with basic configuration	0.11 € *Unit price with basic configuration	9.30 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.15 € *Unit price with basic configuration	0.02 € *Unit price with basic configuration	0.20 € *Unit price with basic configuration	0.32 € *Unit price with basic configuration	0.25 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.33 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.14 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	31.64 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.03 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	2.37 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.84 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	-	0.08 € *Unit price with basic configuration	0.44 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	-	0.15 € *Unit price with basic configuration	0.34 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	30.45 € *Unit price with basic configuration	0.55 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.88 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.08 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.47 € Special price *Unit price with basic configuration Promotional pricing Volume Discount
Min. Shipping Days	Same day	Same day	Same day	Same day	5 Days	5 Days	4 Days	3 Days	5 Days	Same day	5 Days	5 Days	Same day	Same day	5 Days	5 Days	Same day	5 Days	Same day	4 Days	5 Days	Same day	4 Days	5 Days	5 Days	5 Days	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	5 Days	5 Days	7 Days	5 Days	4 Days	Same day	7 Days	Same day	Same day	Same day	Same day
Specifications	Order quantities extended (D-JIT)		Order quantities extended (D-JIT)	Order quantities extended (D-JIT)																													Stock
Type	Axial Mount (External)	Axial Mount (External)	Radial Mounting	Axial Mount (Internal)	-	-	-	Axial Mount (Internal)	-	Axial Mount (Internal)	-	-	Axial Mount (External)	Axial Mount (External)	-	-	Radial Mounting	-	Axial Mount (Internal)	-	-	Axial Mount (External)	-	-	-	-	Radial Mounting	Axial Mount (External)	Axial Mount (Internal)	Retaining Ring Pliers	Radial Mounting	Axial Mount (External)	Axial Mount (Internal)	Axial Mount (External)	-	-	Axial Mount (External)	-	-	Axial Mount (Internal)	Radial Mounting	Axial Mount (External)	Radial Mounting	Axial Mount (External)	Axial Mount (Internal)
Shape	C Type Retaining Ring for Hole	C Type Retaining Ring for Shaft	Retaining Rings - E Type	C Type Retaining Ring for Hole	-	-	-	C Type Retaining Ring for Hole	-	C Type Retaining Ring with Uniform Section	-	-	C Type Retaining Ring for Shaft	C Type Retaining Ring for Shaft	-	-	Retaining Rings - E Type	-	C Type Retaining Ring for Hole	-	-	C Type Retaining Ring for Shaft	C Type Retaining Ring for Shaft	-	-	-	Retaining Rings - E Type	C Type Retaining Ring for Shaft	R Type Retaining Ring	-	Retaining Rings - U Type	C Type Retaining Ring with Uniform Section	C Type Retaining Ring with Uniform Section	Push Nuts (External)	-	-	C Type Retaining Ring with Uniform Section	-	C Type Retaining Ring for Hole	C Type Retaining Ring for Hole	Retaining Rings - E Type	C Type Retaining Ring for Shaft	Retaining Rings - E Type	Retaining Rings - S Type	C Type Retaining Ring for Hole
Nominal	3 ～ 80	3 ～ 400	1.2 ～ 9	10 ～ 80	-	-	-	8 ～ 360	-	4 ～ 70	-	-	10 ～ 200	3 ～ 300	-	-	0.8 ～ 24	-	6 ～ 290	-	-	5 ～ 50	-	-	-	-	0.8 ～ 24	10 ～ 100	10 ～ 90	-	3.2 ～ 8	70	26 ～ 100	1.2 ～ 12	-	-	47	-	-	6.4 ～ 9.5	E-64	3 ～ 130	1.2 ～ 10	6 ～ 75	10 ～ 125
Material	Stainless Steel ～ Steel	Stainless Steel ～ Steel	Stainless Steel ～ Steel	Stainless Steel ～ Steel	-	-	-	Stainless Steel ～ Steel	-	Steel	-	-	Stainless Steel	Steel	-	-	Stainless Steel ～ Steel	-	Steel	-	-	Stainless Steel ～ Steel	Stainless Steel ～ Steel	-	-	-	Stainless Steel	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel ～ Steel	-	-	Steel	-	Stainless Steel ～ Steel	Stainless Steel	Steel	Steel	Stainless Steel	Steel	Steel
Sales Unit	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	-	-	-	-	-	-	-	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	-	-	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	-	-	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	-	-	-	-	-	Low Quantity (Available beginning with 1 pc.)	Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.
Retaining Ring Type	Retained with Outer Ring	-	Retained with Outer Ring	Retained with Inner Ring	-	-	-	-	-	-	-	-	Retained with Outer Ring	Retained with Outer Ring	-	-	-	-	Retained with Inner Ring	-	-	Retained with Outer Ring	-	-	-	-	Retained with Outer Ring	Retained with Outer Ring	Retained with Inner Ring	Retained with Outer Ring / Retained with Inner Ring	Retained with Outer Ring	-	Retained with Inner Ring	Retained with Outer Ring	-	-	-	-	-	Retained with Inner Ring	-	Retained with Outer Ring	Retained with Outer Ring	Retained with Outer Ring	Retained with Inner Ring
Mounting Method Type	Standard	-	Snap-in (Longitudinal Insertion)	Standard	-	-	-	-	-	-	-	-	Standard	Standard	-	-	-	-	Standard	-	-	Standard	-	-	-	-	Snap-in (Longitudinal Insertion)	Standard	Standard	Standard	Snap-in (Longitudinal Insertion)	-	Standard	Push-in (Widthways Insertion)	-	-	-	-	-	Standard	-	Standard	Snap-in (Longitudinal Insertion)	Standard	Standard
Product Type	Retaining Ring	-	Retaining Ring	Retaining Ring	-	-	-	-	-	-	-	-	Retaining Ring	Retaining Ring	-	-	-	-	Retaining Ring	-	-	Retaining Ring	Retaining Ring	-	-	-	Retaining Ring	Retaining Ring	Retaining Ring	Pliers	Retaining Ring	-	Retaining Ring	Retaining Ring	-	-	-	-	Retaining Ring	Retaining Ring	Retaining Ring	Retaining Ring	Retaining Ring	Retaining Ring	Retaining Ring