Regulators, Pressure Boosting Valves（Applicable Fluid：Air）

?* Information on days to ship and prices

• • Recommendation

  

  ARG20(K)~40(K), Regulator w / Built-in Pressure Gauge

  SMC

  SMC's ARG20K, 30K, 40K Regulator With Built-In Pressure Gauge With Backflow Function.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · Built-in function to reliably exhaust air pressure from the outlet side to the inlet side.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	57.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Electro-Pneumatic Regulator ITV1000 / 2000 / 3000 Series

  SMC

  Electro-Pneumatic Regulator ITV1000/2000/3000 Series with 2 possible directions of cable entry.
  [Features]
  · Stepless control of air pressure in proportion to an electric signal.
  · Sensitivity: 0.2 kPa (100 kPa specification).
  · Linearity: within ±1% (F.S.)
  · Hysteresis: within 0.5% (F.S.)
  · Protective structure: IP65.
  · 2 possible directions of cable entry.
  · Grease-free specification (ITV1000 Series).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	375.39 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Regulator, AR20-B to AR60-B and Regulator with Backflow Function, AR20(K)-B to AR60(K)-B

  SMC

  SMC Regulator (With Backflow Function) AR20(K)-B To AR60(K)-B Series.
  [Features]
  · Specifications with a backflow function feature an inbuilt mechanism for quickly exhausting the air-pressure at the outlet side.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  IR1000-A~3000-A, Precision Regulator

  SMC

  The Precision Regulator IR1000-A/2000-A/3000-A Series boasts a high flow rate of approximately 2 times the previous series (at maximum).
  [Features]
  · Air consumption reduced by up to 90% (approx.)
  · Lightweight type with approximately 27% weight reduction.
  · Sensitivity: 0.2% (full span).
  · Repeatability: ±0.5% (full span).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	80.35 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Air Regulators / With Filter

  MISUMI

  [Features] Pressure reducing valve with air filter. -The pressure gauge is sold separately.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.44 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ITVX, High Pressure Electro-Pneumatic Regulator

  SMC

  High-pressure electro-pneumatic regulator that allows stepless control of air pressure in proportion to an electric signal.
  [Features]
  · Maximum supply pressure: 5.0 MPa.
  · Set pressure range: 0.01 to 3.0 MPa.
  · Maximum flow rate: 3,000 L/min (ANR).
  · Fluid-contact parts: fluorine grease.
  · Power consumption: 3W or less.
  · Digital pressure display.
  · RoHS compliant.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,742.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  SRH, Clean Regulator

  SMC

  SRH Series Clean Regulator with a pulsation suppression valve design.
  [Features]
  · Contamination-controlled stainless steel regulator.
  · Oil-free parts assembly.
  · Select between a PTFE (grade A) or fluororubber (grade B) diaphragm depending on the application.
  · Designed with an intake/exhaust port in the diaphragm compartment, facilitating flow.
  · Constructed with valve springs partitioned off by the diaphragm.
  · Pulsation-suppressing valve structure.
  · Cleaned, assembled, and inspected in a Class 100 environment and then packaged and sealed in double bags.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	243.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  AR10-40-A, Modular Style Regulator

  SMC

  SMC Regulator AR10-A to AR40-A.
  [Features]
  · Energy saving regulator.
  · Pressure drop amount: Improved by up to 50%.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.11 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Power Valve, Precision Regulator, VEX1*3 Series

  SMC

  A precision regulator from SMC.
  [Features]
  · A high precision, large capacity relief regulator.
  · A poppet-type, 3-port, large exhaust capacity regulator valve with nozzle flapper mechanism. Available as an air-operated or manual handle type.
  · Excellent pressure setting precision. Having a relief capacity equivalent to the supply capacity allows the regulator to respond quickly and set a precise secondary (outlet) pressure, even when the secondary (outlet) volume and the pressure fluctuations are large.
  · High precision.
  · Minimizes pressure fluctuations with its large-volume supply and exhaust capabilities, making it well suited to balancer applications. In addition it features high precision F.S. (full span) sensitivity within 0.2% and F.S. repeatability of within ±0.5%.
  · Manifold capable. VVEXB: 1/8 - up to 10 stations, VVEX2: 1/4 - up to 8 stations
  · Series with large product lineup. Port diameters available from M5 to 2 inches, ensuring that most flow rates and pipes can be accommodated.
  [VEX1A33/VEX1B33]
  · Minimum size.
  · Non-grease specification.
  · Available with sealing materials of NBR or FKM.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	130.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  6.0 MPa Direct Operated Regulator (Relieving type), VCHR Series

  SMC

  · Process Industry and PET machine builder's requests for both 2 and 3 port, pilot operated, solenoid valves, with high pressure performance are now answered with the launch of SMC's latest Series VCH range.
  · Designed for use with air or inert gas, these new valves can operate up to a maximum pressure of 5.0 MPa thereby substantially exceeding SMC's existing VXH high pressure series.
  · With large flow passages, and ISO1179-1 conforming port thread sizes of G1/2 to G1, high flow rates are ensured and due to a reduction in the overall volume of the pilot chamber their responsiveness can now only be measured in milliseconds.
  · Additionally, the VCH range offers enclosure protection equivalent to IP65 and a DIN type electrical connector as standard and due to its unique collision-less armature construction, with rubber buffers and urethane diaphragm, early indications have confirmed that the valves operation life time will exceed 10 million cycles.
  · Currently the VCH Series is available in four different valve configurations; 2 port valve normally closed - VCH41, 2 port valve normally open - VCH 42, our 3 port option - VCH410, plus a check valve – VCHC40.

  Select to compare

  Configure now
  Starting from∗ ：	1,204.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Separated Type Regulator

  CKD

  Standard type regulator series that includes low pressure versions.
  Over 30 model numbers including various options can be selected from our website.
  
  [Features]
  · Adjuster screw: turning the adjuster screw clockwise will increase the output pressure.
  · Relief valve: Prevents abnormal increases in output pressure by the valve stem and diaphragm separating when the output pressure exceeds the set pressure, allowing air pressure to vent to the atmosphere through the relief valve.
  · Diaphragm: Provides stable air pressure output by opening and closing the valve system based on the force (output pressure) that the pressure regulating spring strikes the bottom of the diaphragm.
  · The large 2215 regulators use a piston to balance the pressure regulating spring.
  · Valve system: Only allows the required amount to pass from input to output when there is an imbalance between the diaphragm and pressure regulating spring.
  · Excellent flow amount due to its wide radius valve openings.
  · Gauge port: Accurately measures output pressure due to the center of the gauge port being located near the output side.
  · Two gauge ports.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	118.93 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  ARX20, Regulator for 2MPa

  SMC

  The ARX20 Series is a piston-type, small-sized regulator for 2.0 MPa.
  [Features]
  · A compact type (face-to-face dimensions: 35 mm / overall length: 80 mm).
  · 3 handy out-ports added convenience.
  · Features a user-friendly handle shape.
  · Ideal for adjusting the discharge pressure on small compressors.
  · Ideal for pressure adjustment as part of air blowing applications.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pressure Control Valve AP100

  SMC

  Pressure Control Valve AP100 discharges pressure to the atmosphere when the pressure exceeds the set value.
  [Features]
  · A pressure control valve that helps maintain a constant pressure within pipes.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  ITV00**, Compact Electro-Pneumatic Regulator

  SMC

  ITV0000 Series Compact Electro-Pneumatic Regulator realizes space savings and reduction of weight for manifold use.
  [Features]
  · DIN rail mount design lets you easily add or remove stations.
  · Compact (15 mm) and lightweight (100 g).
  · 2 types of cable connectors are available: straight type and right-angle type.
  · Built-in single-action fitting.
  · With error indication LED.
  · 2 types of brackets are available: flat brackets and L-shaped brackets.
  · IP65 equivalent enclosure protection.
  · Linearity: within ±1% (full span).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	295.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  ARJ310, Miniature Regulator Series

  SMC

  The Miniature Regulator ARJ310 Series is both compact and lightweight (main unit weight: 65 g).
  [Features]
  · Supports shorter mounting pitches.
  · Accommodates 2 types of thread.
  · Built-in one-touch fitting.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Air Regulator

  MISUMI

  [Features] Pressure reducing valve that can adjust the pressure. -It comes with a pressure gauge and a bracket.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.91 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Modular Regulator Standard White Series

  CKD

  [Features]
  · Built in pressure meter.
  · No tools needed pressure adjustment.
  · Can easily be panel mounted

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.59 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Regulator Single Unit Type, ARM10 Series

  SMC

  Regulator - Single Unit Type, ARM10 Series; available with a variety of one-touch fitting types and sizes.
  [Features]
  · Select the most appropriate type and size for the given installation conditions.
  · Backflow function equipped as standard.
  · Compatible with units with a digital pressure switch.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  ARM11B Series Individual Supply Type Manifold Regulator

  SMC

  ARM11B Series Individual Supply Type Manifold Regulator compatible with digital pressure switches.
  [Features]
  · Select the most appropriate type and size for the given installation conditions.
  · Types and sizes of the single-action fittings can be changed.
  · Backflow function equipped as standard.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  IR1200-A~3200-A, Regulator

  SMC

  IR1200-A/2200-A/3200-A Series high-flow-rate regulator that handles up to about twice the flow rate of conventional products.
  [Features]
  · Air consumption: 0 bleed air.
  · Lightweight type with approximately 27% weight reduction.
  · Repeatability: ±1% (full span).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	62.98 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Pressure Regulating Valve - Pressure Controller Elbow

  NIHON PISCO

  Reduces pressure by outputting flow through the coupling side when load flow is applied to the screw side

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Separated Type Dial Regulator

  CKD

  Equipped with dial for easy pressure adjustment. Even high flow regulation is easy.
  
  [Features]
  · Equipped with pilot port for setting pressure, remote operation capable

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	96.79 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  AR*25 / 35, Pilot Operated Regulator

  SMC

  [Features] It is a relief controller with internal pilot method.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	146.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  ARP20 / 30 / 40, Direct Operated Precision Regulator

  SMC

  Direct-Operated Precision Regulator, Modular Type (With Backflow Function) with sensitivity within 0.2% F.S.
  [Features]
  · Repeatability: Within ±1% F.S. (or within ±3 kPa).
  · Energy saving and air consumption reduced by 80%.
  · Type with the backflow function (ARP20K/30K/40K) can be installed between solenoid valves and cylinders.
  · Specifications with a backflow function feature an inbuilt mechanism for quickly and reliable exhausting the air-pressure at the outlet side.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	57.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ARM2500 / 3000, Modular Style, Regulator Manifold Series

  SMC

  Modular type manifold regulator optimal for central pressure control. Modular Type ARM2500/3000 Series.
  [Features]
  · A modular type that can be freely mounted on a manifold station.
  · Featuring a new knob with a single-action lock system.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	86.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  VEX1*0, Power Valve, Regulator Valve

  SMC

  The Power Valve: Regulator Valve VEX1 Series is a large capacity relief type regulator valve.
  [Features]
  · Wide range of sizes available.
  · Connection port size: 1/8 to 2.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	93.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Manifold Regulator, Centralized Supply Type, ARM5A Series

  SMC

  Manifold regulator with selectable single-action fitting size.
  [Features]
  · Centralized air supply type.
  · 2 mounting types can be selected: direct mounting and DIN rail mounting.
  · Backflow function equipped as standard.
  · Stations: 1 to 10.
  · Centralized supply (IN) piping position: bottom (1), top (2).
  · With/without pressure gauge.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	71.31 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  ARM1000 / 2000, Regulator Manifold Series

  SMC

  Manifold regulator with 4 connection methods.
  [Features]
  · Small size pressure gauge ø15 (diameter 15 mm).
  · Standard models are equipped with a backflow function.
  · Space saving.
  · Fluid: air.
  · Guaranteed pressurance resistance: 1.2 MPa.
  · Maximum operating pressure: 0.8 MPa.
  · Set pressure range (standard): 0.05 to 0.7 MPa.
  · Set pressure range (0.2 MPa setting): 0.05 to 0.2 MPa.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Pressure Reducing Valve With Filter, IW Series

  SMC

  [Features]
  · 2 types of set pressure regulating valve type and fixed type are available.
  · For low- and high-temperature use, Copper-free external parts can be selected.
  · Connecting direction of pressure gauge: 2 directions (front, back).

  Select to compare

  Configure now
  Starting from∗ ：	61.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Regulator Air-Saving Type RPE Series

  CKD

  Air consumption decreased by 70%. An environmentally friendly, new type of precision regulator. * CAD data for this series is presently under revision. Stand by until the correction is completed.

  Select to compare

  Configure now
  Starting from∗ ：	94.64 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ARM5S, Regulator Single Unit Type

  SMC

  Regulator - Single Unit Type, ARM5S Series; available with a variety of one-touch fittings.
  [Features]
  · Width: 14 mm.
  · 2 mounting methods are available (direct mounting and DIN rail mounting).
  · Backflow function equipped as standard.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.61 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  AMR3000-6000 Series MR Unit (Regulator With Mist Separator)

  SMC

  MR Unit (Regulator with Mist Separator) that integrates a mist separator and regulator.
  [Features]
  · Filtration: 0.3 μm.
  · Helps save on space, and requires less piping.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	203.35 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  ARJ210, Miniature Regulator Series

  SMC

  SMC Regulator.
  [Features]
  · The body is made of lightweight aluminum (60 g)
  · 2 types of IN side piping connection: male thread and female thread (M5)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ITVH2000 Series 3.0 MPa High-Pressure Electro-Pneumatic Regulator

  SMC

  High-pressure electro-pneumatic regulator that supports a maximum supply pressure of 3.0 MPa.
  [Features]
  · RoHS compliant.
  · Set pressure range: 0.2 to 2.0 MPa.
  · Stability: ±1% F.S. or less.
  · Power consumption: 3W or less.
  · Maximum flow rate: 3,000 L/min (ANR).
  · Fluid-contact parts: fluorine grease.
  · Digital pressure display.
  · Linearity: ±1% F.S. or less / Hysteresis: 1% F.S. or less / Repeatability: ±1% F.S. or less.

  Select to compare

  Configure now
  Starting from∗ ：	1,658.97 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Regulators / Elbows

  MISUMI

  [Features] Regulator that can adjust the pressure. -With a relief mechanism, when the inlet pressure is introduced from the threaded side, the pressure is reduced and flows out from the fitting side.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Regulators / Unions

  MISUMI

  [Features] Regulator that can adjust the pressure. -This is a regulator with a union nut.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pressure Regulating Valve - Pressure Controller Straight

  NIHON PISCO

  Reduces pressure by outputting flow through the coupling side when load flow is applied to the screw side

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.98 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Relief valve B6061 / 6062 Series

  CKD

  Maintains set pressure by releasing compressed air when pressure rises. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Maintains set pressure by releasing compressed air when pressure rises

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Regulator with Push Lock Type Handle

  NIHON PISCO

  [Features]
  · Can lock handle with one touch of the push lock type handle

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	57.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ARG20(K)~40(K), Regulator w / Built-in Pressure Gauge

  SMC

  Regulator With Built-In Pressure Gauge ARG20/30/40 allows for one-touch installation and removal of the pressure gauge cover.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  · Pressure gauge anti-rotation mechanism.
  · Panel-cut for pressure gauge not necessary.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	57.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Manifold Regulator, Common Supply Type, ARM11A Series

  SMC

  SMC Manifold Regulator, Common Supply Type, ARM11A Series.
  [Features]
  · Select the most appropriate type and size for the given installation conditions.
  · Available with a variety of one-touch fitting types and sizes.
  · Backflow function equipped as standard.
  · Compatible with units with a digital pressure switch.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Clean Regulator, SRP Series

  SMC

  The SRP Series Precision Clean Regulator is a high-precision, low-flow-consumption stainless steel regulator.
  [Features]
  · Bleed volume of 0.5 L/min (ANR) or less (downstream pressure at 0.2 MPa).
  · Setting sensitivity: 0.3% F.S.
  · Repeatability: 1% F.S.
  [Applications]
  · Pressure feed of chemicals.
  · N2 blow.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	256.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ARJ1020, Miniature Regulator with One-touch Fitting

  SMC

  The Miniature Regulator ARJ1020F Series is both compact and lightweight (16 g).
  [Features]
  · Low cracking pressure 0.02 MPa.
  · Standard specification equipped with backflow function.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Electro-Pneumatic E-P HYREG VY1 Series

  SMC

  The Electro-Pneumatic E-P HYREG VY1 Series is a hybrid regulator combining a regulator and a solenoid valve.
  [Features]
  · Stepless controls via electric signals.
  · Simple circuit configuration.
  · Easy to handle.
  · Manifold capable.
  [Applications]
  · Cylinder thrust control.
  · Drive and thrust control.
  · Flow control of various fluids / Pressure control of tanks / Air flow control for nozzles.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,069.24 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  E-P HYREG Manifold Specification

  SMC

  SMC's Manifold Base Manifold Specification VVEX Series.
  [Features]
  · Using the VVEXB/2/4 Series, a manifold with up to 10 stations is possible.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.03 €
  Min. Shipping Days ：	98 Days

  *Unit price with basic configuration

Loading...