Fitting（Type：Fitting Main Body）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Super 300 Type Pillar Fitting Male Connector
PILLAR
The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
◆ Reduction in tightening torque by updated sealing mechanism
Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
◆ Greatly enhanced workability due to simplified tightening control
The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
◆ Excellent sealing performance
Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
◆ Radical reduction in micro-bubble and liquid accumulation
Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
◆ high working pressure/temperature
The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.Configure nowStarting from∗ ： 42.42 € Min. Shipping Days ： 13 Days *Unit price with basic configuration
-
Super 300 Type Pillar Fitting Male Elbow
PILLAR
The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
◆ Reduction in tightening torque by updated sealing mechanism
Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
◆ Greatly enhanced workability due to simplified tightening control
The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
◆ Excellent sealing performance
Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
◆ Radical reduction in micro-bubble and liquid accumulation
Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
◆ high working pressure/temperature
The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.Configure nowStarting from∗ ： 46.58 € Min. Shipping Days ： 13 Days *Unit price with basic configuration
-
- Promotional pricing
LQ1H, High Purity Fluoropolymer Fitting, Threaded Connection - Connector Type
SMC
A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube size can be changed.
· Easy nut fastening.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 14.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
LQ1L, High Purity Fluoropolymer Fitting, Threaded Connection - Elbow Type
SMC
A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube size can be changed.
· Easy nut fastening.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 16.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Fluororesin Couplings / Threaded Connector / Bore Through Connector
MISUMI
No special tools are required for tightening. A full fluoropolymer fitting with high chemical resistance.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 13.10 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Female Elbow, Inch Size
SMC
A fluoropolymer female elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 27.95 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
- Promotional pricing
LQ1E, High Purity Fluoropolymer Fitting, Tubing Connection, Union Elbow
SMC
A union elbow with outstanding flow-through characteristics with minimized liquid pooling.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Male Elbow LQ3L-M Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A male elbow fluoropolymer fitting that can withstand thermal stress.
[Features]
· A flared collet structure.
· Triple-seal construction.
· Excellent assemblability.
· Excellent flow-through characteristics.
· Able to withstand thermal stress.
· For use at 200°C.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 17.40 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Fluoropolymer Pipe Fitting, LQ1 Series, Female Connector, Metric Size
SMC
A fluoropolymer female connector fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 23.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Female Connector, Inch Size
SMC
A fluoropolymer female connector fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 26.63 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
- Promotional pricing
LQ1L, High Purity Fluoropolymer Fitting, Threaded Connection - Elbow Type
SMC
A fluoropolymer male elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 16.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Fluoropolymer Pipe Fitting, LQ1 Series, Female Elbow, Metric Size
SMC
A fluoropolymer female elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 27.95 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
LQ1T, High Purity Fluoropolymer Fitting, Tubing Connection, Union Tee
SMC
A fluoropolymer union tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 25.27 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
LQ1T, High Purity Fluoropolymer Fitting, Tubing Connection, Union Tee
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· Shows strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· For use at 200°C. The trapezoidal thread prevents the angled insertion of nuts.
· The reducer system allows you to switch tube sizes without having to change the body itself.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 25.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Space Saving Union Tee, Metric Size
SMC
A fluoropolymer union tee fitting by SMC.
[Features]
· Metric size.
· The tube can be positioned freely.
· Quadruple-seal construction.
· Offers outstanding flow-through characteristics.
· For use at 200°C.
· Excellent at preventing loosening.
· Strong resistance to tube bending and deformation.
· Easy nut fastening.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 65.65 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ3 Series, Male Branch Tee, Metric Size
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 22.90 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Male Run Tee LQ3R-M Metric Size Fluoropolymer Fittings Hyper Fittings
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 25.00 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ3 Series, Female Run Tee, Metric Size
SMC
A fluoropolymer fitting with excellent flow-through characteristics thanks to its flare-type collet construction.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 30.89 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
LVN, High Purity Fluoropolymer Needle Valve
SMC
A fluoropolymer fitting with an integrated fitting construction.
[Features]
· Fluid adjustment range: 0 to 12 l/min.
· Integrated fitting construction: Hyper fitting, LQ2 series is used.
· Triple-seal construction.
· Nut locking mechanism.
· High flexural strength.
· Different tubing sizes can be selected.
· Material: New PFA.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 156.92 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Fluororesin Fitting F-UEA Union Elbow Adapter
NIHON PISCO
Achieves high pull-out strength and sealing performance. An impact ring holds the tube firmly.Configure nowStarting from∗ ： 44.37 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Fluororesin Couplings / Unions
MISUMI
No special tools are required for tightening. A fluoropolymer fitting with high chemical resistance.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 18.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Fluororesin Couplings / Union Tee
MISUMI
No special tools are required for tightening. An all-fluoropolymer fitting with high chemical resistance.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 24.94 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Fluororesin Couplings / 90 Deg. Elbow / Threaded
MISUMI
No special tools are required for tightening. A fluoropolymer fitting with high chemical resistance.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 23.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Fluororesin Couplings / 90 Deg. Elbow / Union
MISUMI
No special tools are required for tightening. A full fluoropolymer fitting with high chemical resistance.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 25.82 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Fluororesin Couplings / Stepped Unions
MISUMI
No special tools are required for tightening. An all-fluoropolymer fitting with high chemical resistance.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 20.02 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Fluoropolymer Pipe Fitting, LQ1 Series, Male Connector, Inch Size
SMC
A fluoropolymer male connector fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 14.92 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
LQ1R, High Purity Fluoropolymer Fitting, Threaded Connection - Run Tee Type
SMC
A fluoropolymer fitting with a quadruple-sealing construction.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C
· The trapezoidal thread allows for the application of high levels of torque. The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 33.97 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Male Run Tee, Inch Size
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· Strong resistance to tube bending and deformation.
· Easy nut fastening
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 33.97 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Female Run Tee, Metric Size
SMC
A fluoropolymer female run tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.60 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Female Run Tee, Inch Size
SMC
A fluoropolymer female run tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.27 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Male Branch Tee, Metric Size
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· Strong resistance to tube bending and deformation.
· Easy nut fastening
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 33.97 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Male Branch Tee, Inch Size
SMC
A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube size can be changed.
· Easy nut fastening.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 33.97 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Female Branch Tee, Metric Size
SMC
A fluoropolymer female branch tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.27 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Female Branch Tee, Inch Size
SMC
A fluoropolymer female branch tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.27 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
- Promotional pricing
LQ1E, High Purity Fluoropolymer Fitting, Tubing Connection, Union Elbow
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· Shows strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· For use at 200°C. The trapezoidal thread prevents the angled insertion of nuts.
· The reducer system allows you to switch tube sizes without having to change the body itself.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Fluoropolymer Pipe Fitting, LQ1 Series, Panel-Mount Union, Metric Size
SMC
A panel mount union with outstanding flow-through characteristics with minimized liquid pooling.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Easy nut fastening.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 21.27 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Fluoropolymer Pipe Fitting, LQ1 Series, Panel-Mount Union, Inch Size
SMC
A fluoropolymer panel mount union fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 21.73 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Union LQ1U Metric Size Fluoropolymer Fittings / Hyper Fittings
SMC
A union with outstanding flow-through characteristics with minimized liquid pooling.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Union LQ1U Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A fluoropolymer fitting with strong resistance to tube bending and deformation.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube size can be changed.
· Easy nut fastening.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Union Flange LQ1F Metric Size Fluoropolymer Fittings / Hyper Fittings
SMC
A metric size type fluoropolymer fitting with outstanding sealing performance and leakage-prevention reliability.
[Features]
· Quadruple-seal construction.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 176.47 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Union Flange LQ1F Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A fluoropolymer fitting with a trapezoidal thread that allows for the application of high levels of torque.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 176.40 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Union Elbow Reducing, Metric Size
SMC
A reducing type fluoropolymer union elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 65.29 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Union Elbow Reducing, Inch Size
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· The quadruple-sealing construction provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· Strong resistance to tube bending and deformation.
· Easy nut fastening
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 50.73 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Union Tee Reducing, Metric Size
SMC
A fluoropolymer fitting with outstanding sealing performance and leakage-prevention reliability.
[Features]
· Quadruple-seal construction.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 54.87 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Fluoropolymer Pipe Fitting, LQ1 Series, Union Tee Reducing, Inch Size
SMC
A reducing type fluoropolymer union tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 54.87 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Main Body Material |
| Connection Type |
| Thread-to-Pipe Connection Type |
| Thread-to-Pipe Multipoint Connection Type |
| Pipe-to-Pipe Same Diameter Connection Type |
| Pipe-to-Pipe Reducer Connection Type |
| Pipe/Tube-protruded Connection Type |
| Type of Related Component |
| Compatible Tube Outer Diameter (mm) D (D1) |
| Compatible Tube Outer Diameter (mm) D2 |
| Compatible Tube Outer Diameter (mm) D3 |
| Compatible Tube Outer Diameter (inch) D (D1) |
| Compatible Tube Outer Diameter (inch) D2 |
| Compatible Tube Outer Diameter (inch) D3 |
| Compatible Tube Inner Diameter(mm) |
| Connection Screw Type M (M1) |
| Connection Screw Nominal M (M1) |
| Maximum Operating Temperature(℃) |
| Tube Size Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | PILLAR | PILLAR | SMC | SMC | MISUMI | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | NIHON PISCO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC |
| Product Series | LQ1H, High Purity Fluoropolymer Fitting, Threaded Connection - Connector Type | LQ1L, High Purity Fluoropolymer Fitting, Threaded Connection - Elbow Type | Fluororesin Couplings / Threaded Connector / Bore Through Connector | Fluoropolymer Pipe Fitting, LQ1 Series, Female Elbow, Inch Size | LQ1E, High Purity Fluoropolymer Fitting, Tubing Connection, Union Elbow | Male Elbow LQ3L-M Inch Size Fluoropolymer Fittings / Hyper Fittings | Fluoropolymer Pipe Fitting, LQ1 Series, Female Connector, Metric Size | Fluoropolymer Pipe Fitting, LQ1 Series, Female Connector, Inch Size | LQ1L, High Purity Fluoropolymer Fitting, Threaded Connection - Elbow Type | Fluoropolymer Pipe Fitting, LQ1 Series, Female Elbow, Metric Size | LQ1T, High Purity Fluoropolymer Fitting, Tubing Connection, Union Tee | LQ1T, High Purity Fluoropolymer Fitting, Tubing Connection, Union Tee | Fluoropolymer Pipe Fitting, LQ1 Series, Space Saving Union Tee, Metric Size | Fluoropolymer Pipe Fitting, LQ3 Series, Male Branch Tee, Metric Size | Male Run Tee LQ3R-M Metric Size Fluoropolymer Fittings Hyper Fittings | Fluoropolymer Pipe Fitting, LQ3 Series, Female Run Tee, Metric Size | Fluoropolymer Pipe Fitting, LQ1 Series, Male Connector, Inch Size | LQ1R, High Purity Fluoropolymer Fitting, Threaded Connection - Run Tee Type | Fluoropolymer Pipe Fitting, LQ1 Series, Male Run Tee, Inch Size | Fluoropolymer Pipe Fitting, LQ1 Series, Female Run Tee, Metric Size | Fluoropolymer Pipe Fitting, LQ1 Series, Female Run Tee, Inch Size | Fluoropolymer Pipe Fitting, LQ1 Series, Male Branch Tee, Metric Size | Fluoropolymer Pipe Fitting, LQ1 Series, Male Branch Tee, Inch Size | Fluoropolymer Pipe Fitting, LQ1 Series, Female Branch Tee, Metric Size | Fluoropolymer Pipe Fitting, LQ1 Series, Female Branch Tee, Inch Size | LQ1E, High Purity Fluoropolymer Fitting, Tubing Connection, Union Elbow | Fluoropolymer Pipe Fitting, LQ1 Series, Panel-Mount Union, Metric Size | Fluoropolymer Pipe Fitting, LQ1 Series, Panel-Mount Union, Inch Size | Union LQ1U Metric Size Fluoropolymer Fittings / Hyper Fittings | Union LQ1U Inch Size Fluoropolymer Fittings / Hyper Fittings | Union Flange LQ1F Metric Size Fluoropolymer Fittings / Hyper Fittings | Union Flange LQ1F Inch Size Fluoropolymer Fittings / Hyper Fittings | Fluoropolymer Pipe Fitting, LQ1 Series, Union Elbow Reducing, Metric Size | Fluoropolymer Pipe Fitting, LQ1 Series, Union Elbow Reducing, Inch Size | Fluoropolymer Pipe Fitting, LQ1 Series, Union Tee Reducing, Metric Size | Fluoropolymer Pipe Fitting, LQ1 Series, Union Tee Reducing, Inch Size | |||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Starting from∗ | 42.42 € *Unit price with basic configuration | 46.58 € *Unit price with basic configuration | 14.90 € Special price *Unit price with basic configuration Promotional pricing | 16.45 € Special price *Unit price with basic configuration Promotional pricing | 13.10 € *Unit price with basic configuration | 27.95 € *Unit price with basic configuration | 19.52 € Special price *Unit price with basic configuration Promotional pricing | 17.40 € *Unit price with basic configuration | 23.44 € Special price *Unit price with basic configuration Promotional pricing | 26.63 € *Unit price with basic configuration | 16.45 € Special price *Unit price with basic configuration Promotional pricing | 27.95 € Special price *Unit price with basic configuration Promotional pricing | 25.27 € Special price *Unit price with basic configuration Promotional pricing | 25.68 € Special price *Unit price with basic configuration Promotional pricing | 65.65 € *Unit price with basic configuration | 22.90 € *Unit price with basic configuration | 25.00 € *Unit price with basic configuration | 30.89 € *Unit price with basic configuration | 156.92 € *Unit price with basic configuration | 44.37 € *Unit price with basic configuration | 18.77 € *Unit price with basic configuration Volume Discount | 24.94 € *Unit price with basic configuration | 23.42 € *Unit price with basic configuration Volume Discount | 25.82 € *Unit price with basic configuration Volume Discount | 20.02 € *Unit price with basic configuration | 14.92 € Special price *Unit price with basic configuration Promotional pricing | 33.97 € Special price *Unit price with basic configuration Promotional pricing | 33.97 € *Unit price with basic configuration | 46.60 € *Unit price with basic configuration | 42.27 € *Unit price with basic configuration | 33.97 € *Unit price with basic configuration | 33.97 € *Unit price with basic configuration | 42.27 € *Unit price with basic configuration | 42.27 € *Unit price with basic configuration | 19.45 € Special price *Unit price with basic configuration Promotional pricing | 21.27 € Special price *Unit price with basic configuration Promotional pricing | 21.73 € Special price *Unit price with basic configuration Promotional pricing | 19.06 € Special price *Unit price with basic configuration Promotional pricing | 19.52 € Special price *Unit price with basic configuration Promotional pricing | 176.47 € *Unit price with basic configuration | 176.40 € *Unit price with basic configuration | 65.29 € *Unit price with basic configuration | 50.73 € *Unit price with basic configuration | 54.87 € *Unit price with basic configuration | 54.87 € *Unit price with basic configuration |
| Min. Shipping Days | 13 Days | 13 Days | Same day | Same day | Same day | 26 Days | Same day | 7 Days | Same day | 26 Days | Same day | Same day | Same day | Same day | 26 Days | 26 Days | 26 Days | 26 Days | 7 Days | 12 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | Same day | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | Same day | Same day | Same day | Same day | Same day | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days |
| Type | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body | Fitting Main Body |
| Main Body Material | PTFE / PFA | PTFE / PFA | PFA | PTFE / PFA | PTFE | PFA | PFA | PFA | PFA | PFA | PTFE / PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PTFE | PTFE | PTFE | PTFE | PTFE | PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA |
| Connection Type | Thread-to-Tube | Thread-to-Tube | Thread-to-Tube | Thread-to-Tube | Thread-to-Tube | Thread-to-Tube | Pipe-to-Pipe Equal Dia. Connection | Thread-to-Tube | Thread-to-Tube | Thread-to-Tube | Thread-to-Tube | Thread-to-Tube | Pipe-to-Pipe Equal Dia. Connection / Pipe-to-Pipe Unequal Dia. Connection | Pipe-to-Pipe Equal Dia. Connection / Pipe-to-Pipe Unequal Dia. Connection | Pipe-to-Pipe Equal Dia. Connection | Thread-to-Tube, Branch | Thread-to-Tube, Branch | Thread-to-Tube, Branch | - | Others | Pipe-to-Pipe Equal Dia. Connection | Pipe-to-Pipe Equal Dia. Connection | Thread-to-Tube | Pipe-to-Pipe Equal Dia. Connection | Pipe-to-Pipe Unequal Dia. Connection | Thread-to-Tube | Thread-to-Tube, Branch | Thread-to-Tube, Branch | Thread-to-Tube, Branch | Thread-to-Tube, Branch | Thread-to-Tube, Branch | Thread-to-Tube, Branch | Thread-to-Tube, Branch | Thread-to-Tube, Branch | Pipe-to-Pipe Equal Dia. Connection / Pipe-to-Pipe Unequal Dia. Connection | Pipe-to-Pipe Equal Dia. Connection / Pipe-to-Pipe Unequal Dia. Connection | Pipe-to-Pipe Equal Dia. Connection / Pipe-to-Pipe Unequal Dia. Connection | Pipe-to-Pipe Equal Dia. Connection / Pipe-to-Pipe Unequal Dia. Connection | Pipe-to-Pipe Equal Dia. Connection | Pipe-to-Pipe Equal Dia. Connection | Pipe-to-Pipe Equal Dia. Connection | Pipe-to-Pipe Unequal Dia. Connection | Pipe-to-Pipe Unequal Dia. Connection | Pipe-to-Pipe Unequal Dia. Connection | Pipe-to-Pipe Unequal Dia. Connection |
| Thread-to-Pipe Connection Type | Threaded Straight (Barb) | Male Threaded Elbow | Male Threaded Straight | Male Threaded Elbow | Male Threaded Straight | Female Elbow | - | Male Threaded Elbow | Tapped, Straight | Tapped, Straight | Male Threaded Elbow | Female Elbow | - | - | - | - | - | - | - | - | - | - | Male Threaded Elbow | - | - | Male Threaded Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread-to-Pipe Multipoint Connection Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Male Threaded, Branch Tees | Male Threaded, Run Tees | Female Threaded, Run Tees | - | - | - | - | - | - | - | - | Male Threaded, Run Tees | Male Threaded, Run Tees | Female Threaded, Run Tees | Female Threaded, Run Tees | Male Threaded, Branch Tees | Male Threaded, Branch Tees | Female Threaded, Branch Tees | Female Threaded, Branch Tees | - | - | - | - | - | - | - | - | - | - | - |
| Pipe-to-Pipe Same Diameter Connection Type | - | - | - | - | - | - | Union Elbows | - | - | - | - | - | Union Tees | Union Tees | Union Tees | - | - | - | - | - | Union Straight | Union Tees | - | Union Elbows | - | - | - | - | - | - | - | - | - | - | Union Elbows | Panel Mount Union | Panel Mount Union | Cross | Cross | - | - | - | - | - | - |
| Pipe-to-Pipe Reducer Connection Type | - | - | - | - | - | - | - | - | - | - | - | - | Reducing Union Tees | Reducing Union Tees | - | - | - | - | - | - | - | - | - | - | Reducing Union | - | - | - | - | - | - | - | - | - | Reducing Union Elbow | Reducing Union | Reducing Union | Reducing Union | - | - | - | Reducing Union Elbow | Reducing Union Elbow | Reducing Union Tees | Reducing Union Tees |
| Pipe/Tube-protruded Connection Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type of Related Component | Nut | Nut | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Others | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Tube Outer Diameter (mm) D (D1) | 6 ～ 25 | 6 ～ 25 | 3 ～ 25 | - | 4 ～ 10 | - | - | - | 3 ～ 25 | - | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | - | 6 ～ 19 | 4 ～ 19 | 4 ～ 19 | 3 ～ 19 | 4 ～ 12 | 6 ～ 25.4 | 4 ～ 10 | 4 ～ 10 | 4 ～ 10 | 4 ～ 10 | 6 ～ 12 | - | 3 ～ 19 | - | 4 ～ 25 | - | 3 ～ 25 | - | 4 ～ 25 | - | 3 ～ 25 | 3 ～ 25 | - | 3 ～ 25 | - | 10 ～ 25 | - | 12 ～ 25 | - | 6 ～ 25 | - |
| Compatible Tube Outer Diameter (mm) D2 | 4 ～ 22 | 4 ～ 22 | - | - | - | - | - | - | - | - | - | - | 4 ～ 19 | - | - | - | - | - | 6 | - | - | - | - | - | - | - | 4 ～ 10 | - | 4 | - | 4 ～ 6 | - | - | - | 4 ～ 19 | 4 ～ 10 | 4 | 3 ～ 19 | - | - | - | 4 ～ 12 | - | 6 ～ 19 | - |
| Compatible Tube Outer Diameter (mm) D3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 25 | - |
| Compatible Tube Outer Diameter (inch) D (D1) | 1/2 ～ 1/4 | 1/2 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | 1 ～ 3/8 | 1 ～ 3/8 | - | 1 ～ 3/8 | - | - | - | 1 ～ 3/8 | - | - | - | - | 1/4 ～ 3/8 | 1 ～ 3/8 | - | - | - | - | - | 1 ～ 3/8 | - | 1/2 ～ 3/8 | - | 1/2 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 |
| Compatible Tube Outer Diameter (inch) D2 | 3/8 ～ 5/32 | 1/4 ～ 5/8 | - | - | - | - | - | - | - | - | - | - | 1/4 | 1/2 ～ 3/8 | - | - | - | - | 1/8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/4 | 1/4 | 1/4 ～ 3/4 | 1/2 ～ 3/8 | - | - | - | - | 1/2 ～ 3/8 | - | 1/2 ～ 3/8 |
| Compatible Tube Outer Diameter (inch) D3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 3/8 |
| Compatible Tube Inner Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3.95 ～ 22.2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Screw Type M (M1) | R / NPT (Male) | R / NPT (Male) | R / NPT (Male) | R / NPT (Male) | R | Rc / NPT (Tapped) | - | R / NPT (Male) | Rc / NPT (Tapped) | Rc / NPT (Tapped) | R / NPT (Male) | Rc / NPT (Tapped) | - | - | - | R / NPT (Male) | R / NPT (Male) | Rc / NPT (Tapped) | - | - | - | - | R | - | - | R / NPT (Male) | R / NPT (Male) | R / NPT (Male) | Rc / NPT (Tapped) | Rc / NPT (Tapped) | R / NPT (Male) | R / NPT (Male) | Rc / NPT (Tapped) | Rc / NPT (Tapped) | - | - | - | - | - | - | - | - | - | - | - |
| Connection Screw Nominal M (M1) | 1/2B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1/2B ～ 3/8B | 1B ～ 3/8B | - | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | - | - | - | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/4B ～ 3/8B | - | - | - | - | 1/2B ～ 3/8B | - | - | 1B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/4B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1/2B ～ 3/8B | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Operating Temperature(℃) | 200 | 200 | 200 | 200 | - | 200 | 200 | 150 ～ 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 150 ～ 200 | 150 ～ 200 | 150 ～ 200 | - | 200 | - | - | - | - | - | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
| Tube Size Standard | - | - | - | - | - | - | Imperial | - | - | - | - | - | Metric | Imperial | - | - | - | - | Metric / Imperial | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Metric | Metric | Imperial | Metric | Imperial | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
- Fitting Main Body
- Related Components
-
Main Body Material
- PTFE
- PFA
-
Connection Type
- Thread-to-Tube
- Thread-to-Tube, Branch
- Pipe-to-Tube Protrusion
- Pipe-to-Pipe Equal Dia. Connection
- Pipe-to-Pipe Unequal Dia. Connection
- Others
-
Thread-to-Pipe Connection Type
- Male Threaded Straight
- Tapped, Straight
- Male Threaded Elbow
- Female Elbow
- Threaded Straight (Barb)
-
Thread-to-Pipe Multipoint Connection Type
- Male Threaded, Run Tees
- Female Threaded, Run Tees
- Male Threaded, Branch Tees
- Female Threaded, Branch Tees
-
Pipe-to-Pipe Same Diameter Connection Type
- Union Straight
- Union Elbows
- Union Tees
- Panel Mount Union
- Cross
-
Pipe-to-Pipe Reducer Connection Type
- Reducing Union
- Reducing Union Elbow
- Reducing Union Tees
-
Pipe/Tube-protruded Connection Type
- Tube-protruded, Union Elbows
- Tube-protruded, Union Tees
-
Type of Related Component
- Nut
- Sleeve
- Others
-
Compatible Tube Outer Diameter (mm) D (D1)
-
Compatible Tube Outer Diameter (mm) D2
-
Compatible Tube Outer Diameter (mm) D3
-
Compatible Tube Outer Diameter (inch) D (D1)
-
Compatible Tube Outer Diameter (inch) D2
-
Compatible Tube Outer Diameter (inch) D3
-
Compatible Tube Inner Diameter(mm)
-
Connection Screw Type M (M1)
-
Connection Screw Nominal M (M1)
-
Maximum Operating Temperature(℃)
-
Tube Size Standard
- Metric
- Imperial
Brand
CAD data type
-
- 2D
- 3D
Categories related to Fitting
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.