Conduit（Color：Gray）

?* Information on days to ship and prices

• 

  Duct Hose Metal Duct (MD18)

  KANAFLEX CORPORATION

  Uses a reinforced core of aluminum foil, glass cross, and SPTE. A lightweight and flexible duct for easy stowing, storage, and transportation.

  Select to compare

  Configure now
  Starting from∗ ：	137.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Duct Hose - Duct EE Type

  KANAFLEX CORPORATION

  [Features]
  ▪ Low internal resistance and high transportability.
  · Easy to bend, lightweight, and work-efficient.
  · Easy cutting and mounting facilitates easy piping.

  Select to compare

  Configure now
  Min. Shipping Days ：	9 Days

• 

  Duct Hose, Duct Oil Resistance

  KANAFLEX CORPORATION

  Has little internal resistance, therefore allowing for substantial transport capacity. Made from special oil-resistant vinyl chloride for excellent resistance to lubricating oil, cutting oil, and other oils. Cutting and mounting are easy and piping work can be performed easily.

  Select to compare

  Configure now
  Min. Shipping Days ：	16 Days

• 

  Bellows Duct

  TOTAKU INDUSTRIES

  Features large diameter opening yet is lightweight and can be freely shortened or elongated and can be stored compactly at approximately 1/3 of its full size. Can be used for ventilation, exhaust and dust collection applications in various areas such as construction areas inside manholes or tunnels.
  
  [Features]
  Can be freely shortened or elongated and can be stored compactly at approximately 1/3 of its full size.
  Features large diameter opening yet is lightweight and is easy to transport

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  Duct Hose Duct N.S.D.

  KANAFLEX CORPORATION

  The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
  
  [Features]
  · The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
  · Easy to carry to increase work efficiency.
  · The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
  · In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
  · The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Duct Pipe Hose - Rigid Duct N.S.

  KANAFLEX CORPORATION

  [Features]
  · PVC Product.
  · Excellent heat resistance.
  · Structure has less bends due to temperature change.
  · Flexible bendable hose.
  · At least 10% lighter than existing hard ducts.
  · Up to 50% elastic so as not to damage the airtightness.
  · Aperture will change just by twisting the opening of the duct.
  · Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
  · Cutting and mounting are easy and piping work can be performed easily.

  Select to compare

  Configure now
  Min. Shipping Days ：	56 Days

• 

  Duct Hose - D Model

  KANAFLEX CORPORATION

  [Features]
  · A general-purpose duct hose with abundant applications and excellent quality and reliability.
  · Easy cutting and mounting facilitates easy piping.

  Select to compare

  Configure now
  Min. Shipping Days ：	16 Days

• 

  Duct Hose Metal Duct (MD25)

  KANAFLEX CORPORATION

  [Features]
  · Employs a reinforcing core containing a stainless steel plate (SUS304) and specially coated glass cloth.
  · Lightweight and flexible ducting which makes storing and transportation easy.
  · Specially coated glass cloth which is used is highly elastic and flame resistant.
  · Cutting and mounting are easy and piping work can be performed easily

  Select to compare

  Configure now
  Starting from∗ ：	329.71 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TAC Duct D

  TOTAKU INDUSTRIES

  Used for transmission and exhaust in facilities and equipment. Bends easily, is lightweight, and was developed to be labor-saving.
  
  [Features]
  Achieves labor savings due to bendability and low weight.
  · Cutting and mounting are easy and piping work can be performed easily.

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Duct EE

  TOTAKU INDUSTRIES

  A popular type of TAC DUCT-D. Less internal resistance compared with DUCT-D, and good transportability is obtained.

  • Volume Discount

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Rigid Duct PP

  TOTAKU INDUSTRIES

  Duct hose for spot coolers. Can be bent freely, and is able to sustain bent states. Furthermore, the opening diameter can be changed by twisting.
  
  [Features]
  · 10 to 20% lighter than conventional (PVC) products .
  · Can be bent freely, and is furthermore able to sustain bent states (please use indoors and note that as use temperatures increase, the product’s ability to keep its shape declines).
  · The opening diameter can be changed by twisting the opening.
  · Can be cut with knives etc.
  · Ducts can be connected easily by screwing their openings together (please wrap joints with vinyl tape after connecting ducts).
  · Ducts may be incinerated after use.

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Heat-Resistant Duct MD-25 (Free Piping)

  TOTAKU INDUSTRIES

  [Features]
  · Uses specially coated glass cloth and a stainless steel plate (SUS304) reinforcing core, and can be used at 250°C or below.
  · Flexible and easy to store and transport.
  · The specially coated glass cloth used for the product has excellent flame retardant properties (product passed level 1 fireproofing testing)

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  Duct Hose GL Type

  TIGERS POLYMER

  Features a smooth inner surface and little ventilation loss. Exhaust feed hose for woodworking machinery, dusters, and general dust collectors.
  
  [Features]
  · Lightweight and portable.
  · Highly flexible.
  · Features superior chemical resistance against acids, alkali materials, etc.
  · High transport capacity is achieved due to low airflow resistance

  Select to compare

  Configure now
  Min. Shipping Days ：	9 Days

• 

  Duct Hose N Type

  TIGERS POLYMER

  Metal wire is used for reinforcement, and since thermal deformation is reduced, the hose has good flexibility.
  
  [Features]
  · Lightweight and portable.
  ・It has high flexibility.
  · It has superior chemical resistance properties for acids and alkaline etc.
  ・Metal wires in the core wires reduce heat deformation

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Tiflex Hose, AP Type

  TIGERS POLYMER

  Flexible and lightweight hose with an allowable continuous service temperature of 100℃ and below. Airtight.
  
  [Features]
  ･ Heat-resistant flexible hose made from olefin resin and aluminum foil from a special laminating process.
  ･ The special laminated aluminum foil is inserted in an inner-outer surface of an olefin resin for superior airtightness.
  · Flexible, lightweight with superior workability.
  · The allowable continuous service temperature is 100˚C or less

  Select to compare

  Configure now
  Starting from∗ ：	91.76 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tie Flex Hose V Shaped PAL Type

  TIGERS POLYMER

  Lightweight and telescopes freely, can be used continuously at a temperature of 130°C or less.
  
  [Features]
  Flexible hose for heat resistance configured from special laminated aluminum foil and a zinc-plated steel plate.
  Because it is lightweight and telescopes freely, it is easy to stow, store, and transport.
  · The allowable continuous operating temperature is 130˚C or less.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	70.53 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tie Flexible Hose V Model FP Type

  TIGERS POLYMER

  The hose is flexible and the material used for the product is a flameproof Grade 1 material as stipulated in JIS A 1322.
  
  [Features]
  · Made of special coating glass cloth and stainless steel plate (SUS304).
  · Easy to stow, store and transport because it can be extended or retracted as and when required.
  · The allowable continuous operating temperature is 250°C or less.
  · Can be used at higher temperatures than PAL, AG types.
  · The material used, which is a specially coated glass cloth, is a flameproof Grade 1 materials as per JISA1322.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	237.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tie Flexible Hose, V Type, SUS Type

  TIGERS POLYMER

  Uses all stainless steel (SUS304). Continuous operating temperature of up to 400℃.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	116.37 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  TiFlex NH-1 Type

  TIGERS POLYMER

  Excellent expansion/contraction, bending, and thermal insulation. Non-combustible material certified by the Japan Ministry of Land, Infrastructure, Transport and Tourism.

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Zinc Plating Steel Plate Flexible (Iron-Flex) Compact Type

  KURIMOTO

  Thin zinc plating steel plate flexible duct. It has been compressed to 1 m: Extend it before use. [Please study the safety precautions in the catalog.] Sold individually, starting from one unit.

  Select to compare

  Configure now
  Starting from∗ ：	31.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Duct Hose

  SHINSUNG

  [Features]
  · Soft and lightweight
  · The inner surface is flat and smooth.
  · Features excellent chemical resistance.
  · Applicable liquids: powder, air and oil mists.

  Select to compare

  Configure now
  Starting from∗ ：	111.36 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Hose for Air Conditioning and Dust Collection AD-2 Type

  KURARAYPLASTICS

  [Features]
  ・ Lightweight and highly flexible
  ・ Easy to cut and easy to handle
  ・ A hose with a smooth inner surface, low internal resistance, and high transport efficiency
  [Applications]
  ・ For air conditioning of houses and buildings, dust collection for woodworking machines, polishing machines, etc. For sending/exhausting in mines/tunnels, for transporting powders/particles, for sending/exhausting at construction sites, and for general dust collection and sending/exhausting

  Select to compare

  Configure now
  Min. Shipping Days ：	9 Days

• 

  Hose for Air Conditioning and Dust Collection AD-4 Type

  KURARAYPLASTICS

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

Loading...