Rod End Bearings, Spherical Bearings（Lubricating Method：Lubrication）

?* Information on days to ship and prices

• • Recommendation

  

  Link Ball, Male Threaded Holder, BL

  THK

  The holder is perpendicular to the ball shank.
  With grease pockets on the top and bottom of the spherical area, this model has high lubricity and high wear resistance.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.46 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ball joint heads with female thread

  GANTER

  Ball joint heads GN 648.1 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ball joint heads with threaded bolt, Stainless Steel

  GANTER

  Stainless Steel-Ball joint heads GN 648.6 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ball joint heads with female thread, Stainless Steel

  GANTER

  Stainless Steel-Ball joint heads GN 648.5 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Female Threaded Type PHS Type

  THK

  Highly rigid with superior abrasion and corrosion resistance.
  The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
  
  [Features]
  · Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
  · Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.67 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Joint Bearing

  SKF

  [Specifications]
  ・I.D. D(mm): 4~220
  ・Outer diameter(mm): 12~320
  ・Width(mm): 5~135

  Select to compare

  Configure now
  Starting from∗ ：	11.10 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  GN 648.2 Ball joint heads with threaded bolt

  GANTER

  Ball joint heads GN 648.2 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Link Ball, Male Threaded Holder, RBI

  THK

  The mounting bolt and holder are arranged on the same axis, allowing this model to bear an axial load.
  The boot contains grease, providing high lubricity and high abrasion resistance.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Male Threaded Type POS

  THK

  This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
  * The rod end shown in the photo is a representative product.
  Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spherical Bearing PB Type

  THK

  A highly rigid spherical bearing with superior corrosion and abrasion resistance. The sliding surface of the bearing can be thoroughly lubricated from the oil groove and lubrication hole on the outer ring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  L-Ball

  IKO

  [Features]
  · Grease filled part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Universal (Metal Rod End Fitting) Ball Joint

  AIRTAC

  Universal (metal rod end fitting) ball joint manufactured by AirTAC, a company highly rated for its low prices and high quality.· Lubricated type universal ball joint

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pillow Ball

  IKO

  [Features]
  · Contains an oil groove and one oil hole on the outer ring.
  · Does not contain grease.
  · Use with sufficient lubrication.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.07 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Spherical Slide Bearing

  IKO

  [Features]
  · Contains an oil groove and two oil holes on both the inner and outer rings.
  · Does not contain grease.
  · Use with sufficient lubrication.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Female Thread Type PHS Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End, Male Thread Type POS Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spherical Plain Bearing SB

  THK

  The most widely used series in Japan. It is used for heavy loads since the spherical contact area has a large width.
  The outer ring is split at two points to accommodate the inner ring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearing, Standard Type, Female Thread (Copper Alloy) [PTLHS]

  STRUENING

  A standard female threaded type rod end bearing. SB is a Taiwanese manufacturer that was established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ELGES Rod End Bearings, Spherical Bearings / Male thread, Female thread, Welding end, Threaded clamping device

  ELGES

  [Specifications]
  ・I.D. D(mm): 15~110
  ・Connection screw direction: Right Screw, Left Screw
  ・Outer diameter(mm): 30~180
  ・Width(mm): 14~115
  ・Thread type: Male thread, Female thread, Welding end, Threaded clamping device

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• • Promotional pricing

  

  Spherical Plain Bearing SA1

  THK

  [Structure and Features]
  · The spherical plain bearing is a self-aligning plain bearing designed for heavy loads. The inner and outer rings are made from high-carbon chromium bearing steel that is hardened, ground, phosphate-coated and seized with molybdenum disulfide (MoS2). The SA1 model can bear large radial loads and thrust loads in both directions. Furthermore, as it is highly impact resistant, the spherical plain bearing is most suited for low speed, heavy load rocking components such as the cylinder clevises or hinges of construction and civil engineering machinery, truck suspensions, and train bolster anchors.
  [Types and Features]
  · The SA1 model of the series is popular in Europe. The outer ring is split at one point and is narrower and thinner than the SB model, so it can be used in small spaces. Models with dust seals on both sides (SA1-UU) are also available. These seals are highly effective at keeping out dust.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearing, Right Female Thread, Metal Type 4 Piece PR

  MINEBEA

  Also referred to as "Insert type," the construction features two insert pieces that are press-fitted in the body head end face from both sides. Assembly of the 4 piece rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. The body is made from S48C equivalent, providing relatively high tensile strength of 568N/mm┣sup┫2┣/sup┫ and a copper alloy insert offers resistance to seizure. This rod end bearing is widely used for construction and general industrial machinery.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Ball, Insert Type PBI Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.45 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  TRUSCO Rod End, Lubricated Type, Male Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  TRUSCO Rod End, Lubricated Type, Female Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  None Open Bearing Rod ends E Series / Male thread, Female thread

  SKF

  [Specifications]
  ・Thread type: Male thread, Female thread
  ・Seal: None open bearing
  
  None Open Bearing Rod ends E Series

  Select to compare

  Configure now
  Starting from∗ ：	32.47 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  None Open Bearing Rod ends ES Series / Male thread, Female thread, Welding end

  SKF

  [Specifications]
  ・Seal: None open bearing
  ・Thread type: Male thread, Female thread, Welding end

  Select to compare

  Configure now
  Starting from∗ ：	49.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ELGES Rod ends DO Series / Female thread, Threaded clamping device

  ELGES

  [Specifications]
  ・Thread type: Female thread, Threaded clamping device
  ・Seal: None open bearing

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• • Promotional pricing

  

  Rod End Bearing, Right Male Thread, Metal Type 4 Piece PR-E

  MINEBEA

  Also referred to as "Insert type," the construction features two insert pieces that are press-fitted in the body head end face from both sides. Assembly of the 4 piece rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. The body is made from S48C equivalent, providing relatively high tensile strength of 568N/mm┣sup┫2┣/sup┫ and a copper alloy insert offers resistance to seizure. This rod end bearing is widely used for construction and general industrial machinery.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearing, Standard Type, Male Thread (Copper Alloy) [PTLOS]

  STRUENING

  MISUMI-VONA provides carefully chosen products from fast-growing Asian manufacturers to meet our customers' needs. Select a product to suit your applications. A Taiwanese manufacturer established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-DO-2TS, DIN ISO 12 240-1, sealing with 3 lips made of PTFE with steel reinforcement on both sides

  INA

  [Specifications]
  ・Type: Spherical Bearing
  ・Spherical Bearing Type: Standard
  ・Main Body Material: Steel

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...