Insert（Screw Type：Metric (Coarse) Thread Page 2）

Search by sub-category

100

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Promotional pricing

Brass Bit Insert (Standard, One Sided) / HSB

HIROSUGI-KEIKI

[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.24 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Brass, Ensat, Screw Plastic Deformation, Type 305

KKV

Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.50 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Iron, Ensat Small Outside Three-Hole / Short 347 Type

KKV

Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TEC Sonic (TEC Type)

TEC Sonic (TEC Type)【1-500 Pieces Per Package】

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D 2.5D
[Length] B (mm) 3.9 5.7 8.2 9.5 12.7

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insertion Tool Tangless

SUNCO

[nominal size M] 2, 2.5, 3, 4, 5, 6, 8, 10, 12 [thread type] metric (coarse) thread

Select to compare

Configure now
Starting from^∗ ：	158.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lock Recoil

Lock Recoil【500 Pieces Per Package】

SUNCO

[Material] Stainless Steel
[Thread Size M] 2.5 3 4 5 6 8 10 12 14 16 18 20 22 24

Select to compare

Configure now
Starting from^∗ ：	431.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Nylon Nut Insert / NNI

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2.5/3/4/5/6/8
Main Body
[Material] Nylon 66
[Color] Milky White
[Heat Warping Temperature] 1.82 MPa: 75°C
[UL Standard] UL94V-2 (Materials)
Screw Part
[Material] Aluminum (A2011 Equivalent)
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.47 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Promotional pricing

Tangless Insert Metric Coarse

ACCURATE

An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.41 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Self Floating Fastener

Self Floating Fastener【1-1,000 Pieces Per Package】

SEL JAPAN

Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.48 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Dodge Bit Insert Standard SD (Brass Cadmium-Less)

Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】

TOKAI METAL INDUSTRY

Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

C-Lock (HCL Type)

C-Lock (HCL Type)【10-100 Pieces Per Package】

BOHSEI

Flange shape enables screws to be tightened without damaging plastics. Also prevents plastic burrs from forming when inserts are pressed in.

Select to compare

Configure now
Starting from^∗ ：	4.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Iron, Ensat, with Pin / Long Type 318

KKV

Select to compare

Configure now
Starting from^∗ ：	5.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Tangless Insert Metric Coarse Locking

ACCURATE

A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.71 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel Tangless Insert

SUNCO

[Nominal M] 2, 2.5, 2.6, 3, 4, 5, 6, , 8, 10, 12, 16, 20
[Material] Stainless Steel
[Surface Processing] Bare

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.70 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Brass Sonic Lock (SL Type)

SUNCO

[Nominal M] 2.5, 3, 4
[Material] Brass
[Surface Processing] Bare

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Stainless Steel Recoil

Stainless Steel Recoil【1-100 Pieces Per Package】

SUNCO

[Nominal M] 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
[Material] Stainless Steel
[Surface Processing] Bare

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.76 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Screw Reinforcement Tangless Insert

Screw Reinforcement Tangless Insert【10-20 Pieces Per Package】

KS SANGYO

Tangless insert screw.
[Features]
· This tangless insert drastically cuts down on work procedures and time, which increases work efficiency, making it possible to reduce costs.
· Insert work, which took 56 seconds in the past, was drastically shortened to 7 seconds by using a dedicated power tool.
· Tangless design means no tangs to break off and no concerns for missing pitches or damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.

Select to compare

Configure now
Starting from^∗ ：	14.81 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Sprue Insertion Tool INP M Thread

SUNCO

[Nominal M] 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 12, 14, 16, 18, 20, 22

Select to compare

Configure now
Starting from^∗ ：	64.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Brass Ultrasert II / HUD II

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.42 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

E-Sert Spiral Tap

TSUGAMI

A tap that includes a spiral blade groove (approx. 35°) for efficiently performing tapping and creating blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	32.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

E-Sert 2-Set Tap

TSUGAMI

This is a tap that was especially designed for E-sert (helisert) bottom holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Sel Locking Fastener SLN (Non-Lock)

Sel Locking Fastener SLN (Non-Lock)【1-1,000 Pieces Per Package】

SEL JAPAN

Optimal nut for preventing looseness of vibrating parts, etc. For mounting, press in and tighten with a normal screwdriver. No special tools required.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lock Sprue

Lock Sprue【1-100 Pieces Per Package】

NIPPON SPREW

This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.93 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Ultrasert 4 FUIV, Flange Type (Brass, Cadmium-Free)

Ultrasert 4 FUIV, Flange Type (Brass, Cadmium-Free)【1-1,000 Pieces Per Package】

TOKAI METAL INDUSTRY

Offers the strongest tension and other strengths over other inserts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.45 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Dodge Insert Flange Type (Brass Cadmium-Less)

Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】

TOKAI METAL INDUSTRY

Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.51 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

C TEC (CT Type)

C TEC (CT Type)【100 Pieces Per Package】

BOHSEI

Verification work on the embedded direction is not necessary because both ends have the same shape, which allows for faster work. Recommended when considering the use of parts feeders for automation.

Select to compare

Configure now
Starting from^∗ ：	20.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Recoil-Free Specialized Size

RECOIL

Recoil, threaded insert, non-recoil special size. [Thread type]Coarse. " Material: EN 1.4301 Equiv. (sintered)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.76 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Iron, Ensat Small Outside Three-Hole / Long348 Type

KKV

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Tool for Inserts Manual Processing 610-Type

KKV

A manual work tool for inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	73.67 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Flat Head Sparrow (Type HSR)

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 5 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.55 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

B-Lock Model N41

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, with notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D
[Length] B (mm) 3.9 4.7 7.9 9.5 12.7

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.13 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

B-Lock Model N42

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, with notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 6, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Press Lock (Type PLK)

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw length (after insertion)
[L](D = screw diameter M) 2D with notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 5
[Length] B (mm) 5.8 8.2 9.5

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Fin Lock (Type FL)

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D
[Length] B (mm) 4.8 8.0

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tangless Insert Metric Coarse Taping Packaging

ACCURATE

We prevent incorrect quantities by shipping using tape and packaging. Aims to improve efficiency through using electric tools in combination.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.07 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Brass Flat Head Sonic Lock (SHK Type)

SUNCO

[Nominal M] 3
[Material] Brass
[Surface Processing] Bare

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.31 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Stainless Steel E-Sert Hemlock-Made

Stainless Steel E-Sert Hemlock-Made【1-100 Pieces Per Package】

SUNCO

[Nominal M] 2, 2.2, 2.5, 2.6, 7, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42
[Material] Stainless Steel
[Surface Processing] Bare

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Male Screw Repair Coil Thread -R

Male Screw Repair Coil Thread -R【20 Pieces Per Package】

KS SANGYO

Insert screw that can be inserted and removed easily and smoothly.
[Features]
· Ready-to-use screw insert, compatible with the tools you have at hand.
· The sampling notch makes it unnecessary to forcibly pull out to avoid damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.

Select to compare

Configure now
Starting from^∗ ：	16.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Sprue Tongue Creasing Tool

SUNCO

It is a tool that folds the tang after inserting the sprue.
Press the tip against the tang and lightly hit the head with a hammer to easily break off at the notch.
In addition, the snapped-off tang attaches to the magnet for confirmation on the spot.

[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20
[Nominal W] #2-56, #4-40, #5-40, #6-32, #8-32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

E-Sert Bending and Extracting Tool for M Threads

SUNCO

[Nominal M] 2.5, 2.6, 3, 3.5, 4, 5, 6, 7, 8, 10, 14, 16, 18, 22, 24, 27, 30, 33, 36, 39, 42, 52
[Nominal W] #2-56, #4-40, #6-32, #8-32, #10-24, 1/4, 5/16, 3/8, 7/16, 1/2, 6/16, 5/8, 3/4, 1-8

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Sprue 2 pcs. Set Tap for M Thread

SUNCO

[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, 36

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Sprue Point Tap

SUNCO

[nominal size M] 2,2.5,2.6,3,4,5,6,8,10,12 "thread type" metric (coarse) thread

Select to compare

Configure now
Starting from^∗ ：	42.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Sprue Spiral Tap

SUNCO

[Nominal M] 2, 2.5, 2.6, 3, 4, 5, 6, 8, 12, 14, 16, 18, 20

Select to compare

Configure now
Starting from^∗ ：	24.95 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tangless 2 Piece Set Tap

SUNCO

[nominal size M] 2,5,3,4,5,6,8,10 "thread type" metric (coarse) thread

Select to compare

Configure now
Starting from^∗ ：	57.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Sprue Removal Tool

SUNCO

It is used to pull the sprue from the internal thread of the threaded slot of the base material.

Select to compare

Configure now
Starting from^∗ ：	27.32 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Type
Application
Material
Screw Type
Screw Dia. M (after insertion)(mm)
Thread Dia. (After inserted), Unified(inch)
Length L (after insertion) (D = Thread Dia. M)
Notch
Shape
Sales Unit

	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing
Brand	HIROSUGI-KEIKI	KKV	KKV	JAPAN DRIVE-IT	SUNCO	SUNCO	HIROSUGI-KEIKI	ACCURATE	SEL JAPAN	TOKAI METAL INDUSTRY	BOHSEI	KKV	ACCURATE	SUNCO	SUNCO	SUNCO	KS SANGYO	SUNCO	HIROSUGI-KEIKI	TSUGAMI	TSUGAMI	SEL JAPAN	NIPPON SPREW	TOKAI METAL INDUSTRY	TOKAI METAL INDUSTRY	BOHSEI	RECOIL	KKV	KKV	JAPAN DRIVE-IT	JAPAN DRIVE-IT	JAPAN DRIVE-IT	JAPAN DRIVE-IT	JAPAN DRIVE-IT	ACCURATE	SUNCO	SUNCO	KS SANGYO	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO
Product Series	Brass Bit Insert (Standard, One Sided) / HSB	Brass, Ensat, Screw Plastic Deformation, Type 305	Iron, Ensat Small Outside Three-Hole / Short 347 Type	TEC Sonic (TEC Type)【1-500 Pieces Per Package】	Insertion Tool Tangless	Lock Recoil【500 Pieces Per Package】	Nylon Nut Insert / NNI	Tangless Insert Metric Coarse	Self Floating Fastener【1-1,000 Pieces Per Package】	Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】	C-Lock (HCL Type)【10-100 Pieces Per Package】	Iron, Ensat, with Pin / Long Type 318	Tangless Insert Metric Coarse Locking	Stainless Steel Tangless Insert	Brass Sonic Lock (SL Type)	Stainless Steel Recoil【1-100 Pieces Per Package】	Screw Reinforcement Tangless Insert【10-20 Pieces Per Package】	Sprue Insertion Tool INP M Thread	Brass Ultrasert II / HUD II	E-Sert Spiral Tap	E-Sert 2-Set Tap	Sel Locking Fastener SLN (Non-Lock)【1-1,000 Pieces Per Package】	Lock Sprue【1-100 Pieces Per Package】	Ultrasert 4 FUIV, Flange Type (Brass, Cadmium-Free)【1-1,000 Pieces Per Package】	Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】	C TEC (CT Type)【100 Pieces Per Package】	Recoil-Free Specialized Size	Iron, Ensat Small Outside Three-Hole / Long348 Type	Tool for Inserts Manual Processing 610-Type	Flat Head Sparrow (Type HSR)	B-Lock Model N41	B-Lock Model N42	Press Lock (Type PLK)	Fin Lock (Type FL)	Tangless Insert Metric Coarse Taping Packaging	Brass Flat Head Sonic Lock (SHK Type)	Stainless Steel E-Sert Hemlock-Made【1-100 Pieces Per Package】	Male Screw Repair Coil Thread -R【20 Pieces Per Package】	Sprue Tongue Creasing Tool	E-Sert Bending and Extracting Tool for M Threads	Sprue 2 pcs. Set Tap for M Thread	Sprue Point Tap	Sprue Spiral Tap	Tangless 2 Piece Set Tap	Sprue Removal Tool
CAD								2D / 3D
Starting from^∗	0.24 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.50 € *Unit price with basic configuration Volume Discount	1.20 € *Unit price with basic configuration Volume Discount	0.34 € *Unit price with basic configuration Volume Discount	158.73 € *Unit price with basic configuration	431.75 € *Unit price with basic configuration	0.47 € *Unit price with basic configuration	0.41 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.48 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.47 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	4.15 € *Unit price with basic configuration	5.73 € *Unit price with basic configuration	0.71 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.70 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.36 € *Unit price with basic configuration Volume Discount	0.76 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.81 € Special price *Unit price with basic configuration Promotional pricing	64.29 € *Unit price with basic configuration	0.42 € *Unit price with basic configuration	32.35 € *Unit price with basic configuration Volume Discount	42.36 € *Unit price with basic configuration Volume Discount	1.79 € *Unit price with basic configuration Volume Discount	0.93 € *Unit price with basic configuration Volume Discount	0.45 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.51 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	20.74 € *Unit price with basic configuration	1.76 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	73.67 € *Unit price with basic configuration Volume Discount	0.55 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.13 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.21 € *Unit price with basic configuration Volume Discount	2.10 € *Unit price with basic configuration Volume Discount	0.37 € *Unit price with basic configuration Volume Discount	1.07 € *Unit price with basic configuration Volume Discount	0.31 € *Unit price with basic configuration Volume Discount	8.85 € *Unit price with basic configuration Volume Discount	16.59 € *Unit price with basic configuration	22.89 € *Unit price with basic configuration Volume Discount	20.99 € *Unit price with basic configuration Volume Discount	42.73 € *Unit price with basic configuration Volume Discount	42.17 € *Unit price with basic configuration	24.95 € *Unit price with basic configuration	57.21 € *Unit price with basic configuration	27.32 € Special price *Unit price with basic configuration Promotional pricing
Min. Shipping Days	Same day	Same day	6 Days	6 Days	6 Days	6 Days	12 Days	Same day	Same day	Same day	6 Days	6 Days	Same day	Same day	6 Days	Same day	Same day	6 Days	12 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	Same day	Same day	Same day	Same day	Same day	6 Days	6 Days	6 Days	5 Days	6 Days	6 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day
Specifications																													Stock
Type	Press Fit	Self-Tapping	Self-Tapping	Press Fit	Tool	Standard	Press Fit	Tangless	Swaged	Standard	Press Fit	Self-Tapping	Tangless	Tangless	Press Fit	Standard	Tangless	Tool	Press Fit	Tool	Tool	Swaged	Standard	Standard	Standard	Press Fit	Standard	Self-Tapping	Tool	Press Fit	Press Fit	Press Fit	Press Fit	Press Fit	Tangless	Press Fit	Standard	Standard	Tool	Tool	Tool	Tool	Tool	Tool	Tool
Application	Light Metal	-	-	-	-	-	Resin General	Light Metal / Cast Iron / Resin General	Light Metal	Resin General	Resin General	-	Light Metal / Cast Iron / Resin General	-	-	-	Light Metal / Cast Iron / Resin General	-	Light Metal	-	-	Light Metal	Light Metal	Resin General	Resin General	Resin General	Light Metal	-	-	-	-	-	-	-	Light Metal / Cast Iron / Resin General	-	-	Light Metal / Cast Iron / Resin General	-	-	-	-	-	-	-
Material	Brass	Brass	Steel	Brass	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Nylon	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Brass	Steel	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	-	Brass	Steel	Steel	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Brass	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Steel	Steel	Brass	Brass	Brass	Brass	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	-	-	-	-	-	-	-
Screw Type	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread
Screw Dia. M (after insertion)(mm)	1.4 ～ 5	3 ～ 6	4 ～ 16	2 ～ 8	2 ～ 12	8	2.5 ～ 8	2 ～ 24	3 ～ 4	2.6 ～ 8	3 ～ 6	4 ～ 16	2.5 ～ 12	2 ～ 20	2.5	2 ～ 16	2 ～ 12	2.2 ～ 20	2.6 ～ 8	3 ～ 8	3 ～ 12	3 ～ 4	4 ～ 10	3 ～ 8	2.6 ～ 8	3	3 ～ 10	4 ～ 12	2.5 ～ 16	3 ～ 8	2 ～ 4	3 ～ 6	3 ～ 5	3 ～ 4	2.5 ～ 5	3	2.2 ～ 30	3 ～ 6	2 ～ 16	2.5 ～ 24	2 ～ 36	2	2 ～ 16	2.5 ～ 10	2.5 ～ 5
Thread Dia. (After inserted), Unified(inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Length L (after insertion) (D = Thread Dia. M)	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D	-	-	1.5D / 2D	-	2D	2.5D / 3D	1D / 1.5D / 2D	-	1D / 1.5D / 2D / 2.5D / 3D	-	-	1D / 1.5D / 2D	1D / 1.5D / 2D	-	1D / 1.5D / 2D / 2.5D / 3D / 0.5D	1D / 1.5D / 2D	-	1.5D / 2D / 2.5D	-	-	-	1D / 1.5D / 2D / 3D	1.5D / 2D	1.5D / 2D / 2.5D	-	0.5D / 0.8D	-	-	1.5D / 2D	2D	1.5D / 2D	2D	1.5D / 2D	1D / 1.5D / 2D	-	1D / 1.5D / 2D / 2.5D / 3D	1D / 1.5D / 2D	-	-	-	-	-	-	-
Notch	Not Provided	-	-	Not Provided	-	Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	-	Provided	Not Provided	Provided	Provided	-	Not Provided	-	-	Not Provided	Provided	Not Provided	Not Provided	-	Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Provided	Provided	-	-	-	-	-	-	-
Shape	Standard	Standard	Small O.D. 3-Hole Type	Standard	-	-	Standard	-	-	Standard	Standard	With Pin Type	-	Standard	Standard	Standard	Standard	-	Standard	-	-	-	-	Standard	Standard	Standard	-	Small O.D. 3-Hole Type	-	Standard	Standard	Standard	Standard	Standard	-	Standard	Standard	Standard	-	-	-	-	-	-	-
Sales Unit	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	-	-	Low Quantity (Available beginning with 1 pc.)	Box, Pkg.	Box, Pkg.	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	-	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.)	-	-	-	-	-	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)

Filter by:

Stock

- Show only stock items
Clear

Type
- Standard
- Tangless
- Self-Tapping
- Tool
- Swaged
- Press Fit
Images

Clear

Application
- Light Metal
- Cast Iron
- Resin General
Clear

Material
- Steel
- Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)
- Stainless (EN 1.4401 Equiv.)
- Stainless Steel (EN 1.4016 Equiv.)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
- Stainless steel
- Stainless Steel
Clear

Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
Clear

Screw Dia. M (after insertion)(mm)
1.4

1.6

1.7

2

2.2

2.5

2.6

3

3.5

4

5

6

6a

7

8

M 8

9

10

M 10

11

12

M 12

14

15

16

M 16

18

20

22

24

27

30

33

36

39

42
Drawing

Clear

Thread Dia. (After inserted), Unified(inch)
1"-12

1"-8

1/2

1/2"

1/2-20

1/2-13

1/4

1/4"

1/4-28

1/4-20

2

#2-56

3/4-16

3/4-10

3/8

3/8"

3/8-24

3/8-16

4

#4-48

#4-40

#5-40

5/8

5/8"

5/8-18

5/8-11

5/16

5/16-24

5/16-18

6

#6-40

#6-32

7/8-14

7/8-9

7/16"

7/16-20

7/16-14

8

No. 8

#8-36

#8-32

9/16-18

10

No. 10

#10-32

#10-24

#12-24
Clear