Screw-Hole-Related Tools（work material：Medium carbon steel (carbon content 0.25 to 0.45%)）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
For Tapered Screw for Pipe (Short Screw Type Spiral) SP-S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes- Volume Discount
Configure nowStarting from∗ ： 39.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Taper Tap Series for Pipes General Applications TPT
OSG
For use when machining tapered female threads for pipes. Long threaded type used primarily for connecting pipe-shaped items- Volume Discount
Configure nowStarting from∗ ： 17.00 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, for General, EX-POT
OSG
Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference- Volume Discount
Configure nowStarting from∗ ： 7.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hand Tap HT (Cutting Tap)
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.- Volume Discount
- Stock
Configure nowStarting from∗ ： 18.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP
YAMAWA MFG
Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.- Volume Discount
Configure nowStarting from∗ ： 15.61 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap Series, General Purpose EX-SFT
OSG
Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.- Volume Discount
- Stock
Configure nowStarting from∗ ： 7.97 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 10.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series Point Tap Long Shank A-LT-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.Configure nowStarting from∗ ： 23.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Hand Tap Series, for General, HT
OSG
High speed steel hand tap.
Working material: magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible.- Volume Discount
Configure nowStarting from∗ ： 8.29 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Groove-Free Tap Series, Tin Coated, TIN-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.- Volume Discount
Configure nowStarting from∗ ： 17.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Hand Tap - Metric Fine Thread Screw
SKC
[Features]
It can be used for engraving thread grooves of fine threads.
[Features]
For right-hand threads.- Volume Discount
Configure nowStarting from∗ ： 13.92 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.Configure nowStarting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Trapezoidal Thread Cutting Tap _TMB 29100
WALTER PROTOTYP
HSS-E, Cutting Blade 24 x P, 5° Left Torsion, 200 to 900 N/mm² Work Material or 28 HRC, for Long- and Short-Chipping Work MaterialConfigure nowStarting from∗ ： 693.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap for Nickel Base Alloy ZEN-B
YAMAWA MFG
A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.- Volume Discount
Configure nowStarting from∗ ： 21.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SG Spiral Tap SGSP
NACHI(FUJIKOSHI)
[Features]
-Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.Configure nowStarting from∗ ： 53.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】
MISUMI
[Features]
-Can be used for through hole machining
-Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.
-Excellent abrasion resistance and resistance to chip welding due to TiN coating
-Long shank, ideal for drilling deep tapped holes (G-LS-POT).- Volume Discount
Configure nowStarting from∗ ： 14.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
[Features]
A general purpose hand tap made from uncoated high speed steel
High versatility, suitable for a wide range of applications and materials such as aluminium and general steel.- Volume Discount
Configure nowStarting from∗ ： 34.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.Configure nowStarting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Hexagonal Re-Threading Die
SKC
Nut used to rethread bolts. Attaches to a wrench for hex nuts.- Volume Discount
Configure nowStarting from∗ ： 14.12 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
A Tap Series for Pipes Point Tap A-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.- Volume Discount
Configure nowStarting from∗ ： 15.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
A Tap Series, Spiral Tap, A-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.- Volume Discount
Configure nowStarting from∗ ： 16.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Point Tap PO(N-PO)
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.- Volume Discount
Configure nowStarting from∗ ： 15.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX
YAMAWA MFG
Suitable for tapping high carbon steel like S55C etc. Has undergone oxidation treatment.- Volume Discount
Configure nowStarting from∗ ： 11.36 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Short Spiral Tap for Deep Holes S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.- Volume Discount
Configure nowStarting from∗ ： 12.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultrafine particle carbide and new type three-layer PVD coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.- Volume Discount
Configure nowStarting from∗ ： 181.78 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
MT Series High-Speed Steel Point Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Configure nowStarting from∗ ： 7.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, TIN-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Configure nowStarting from∗ ： 16.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap Series, V Coated, V-SFT
OSG
Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.- Volume Discount
Configure nowStarting from∗ ： 17.63 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, Tin Coated, TIN-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Configure nowStarting from∗ ： 15.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.Configure nowStarting from∗ ： 27.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Spiral Fluted SFT-TPT
OSG
It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.Configure nowStarting from∗ ： 24.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Parallel Tap Series for Pipes General Applications SPT
OSG
For use when machining parallel female pipe taper threads and female pipe parallel threads- Volume Discount
Configure nowStarting from∗ ： 14.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 19.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Groove-Free Tap Series X Performer S-XPF
OSG
When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.- Volume Discount
Configure nowStarting from∗ ： 19.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Groove-Free Tap Series for Steel HRT
OSG
Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris- Volume Discount
Configure nowStarting from∗ ： 8.41 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Nut Tap Series Nut Tap NT
OSG
Primarily for thread cutting on nuts. Takes the workability of nuts into consideration with a long screw thread section and shank section and is capable of continuous operation until the nuts fill the shank section.- Volume Discount
Configure nowStarting from∗ ： 27.21 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
MMTS Micro Threading Tool
NS TOOL
Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken- Volume Discount
Configure nowStarting from∗ ： 100.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
IT-Toughlet C Coated
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.- Volume Discount
Configure nowStarting from∗ ： 38.28 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Pg Conduit Thread Tap (German Standard)
SKC
It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiencyConfigure nowStarting from∗ ： 102.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Gas Pipe Solid Die Taper NPT
SKC
[Features]
Threads (dies) for machining external threads for American pipes in gas pipelines.- Volume Discount
Configure nowStarting from∗ ： 31.48 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel-Use SU Spiral-Type
SKC
[Specifications]
· Shape: Spiral tap
· Screw type: metric
· Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron (BsC) [○] /Bronze (PB) [○] /Aluminum Rolled Material (AL) [○] /Aluminum Alloy Casting (AC, ADC) [○] /Zinc Alloy Casting (ZDC) [○]
· Material Details: SKH- Volume Discount
Configure nowStarting from∗ ： 18.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Hand Tap - Whitworth Screw for Coarse Thread (55° Angle)
SKC
Used for General Tapping- Volume Discount
Configure nowStarting from∗ ： 11.37 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel Hand Tap SU-HT
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 5 m/min or less is recommended.
[Applications]
Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.- Volume Discount
Configure nowStarting from∗ ： 8.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plus Series Point Tap +PO (N+PO)
YAMAWA MFG
* N+SP will be replaced with +SP as soon as there is no more in stock.Configure nowStarting from∗ ： 11.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | OSG | SKC | OSG | WALTER PROTOTYP | YAMAWA MFG | NACHI(FUJIKOSHI) | MISUMI | MISUMI | OSG | SKC | OSG | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | CARMEX | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | NS TOOL | TANOI MFG | SKC | SKC | SKC | SKC | YAMAWA MFG | YAMAWA MFG |
| Product Series | For Tapered Screw for Pipe (Short Screw Type Spiral) SP-S-PT | Spiral Tap Series, General Purpose Sewing Machine (SM) Screw, EX-SFT-SM | TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】 | Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT | ||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 39.87 € *Unit price with basic configuration | 17.00 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.45 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 18.10 € *Unit price with basic configuration | 15.61 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.97 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 10.88 € *Unit price with basic configuration Volume Discount | 23.65 € *Unit price with basic configuration | 8.29 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 17.52 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 13.92 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 24.43 € *Unit price with basic configuration | 693.66 € *Unit price with basic configuration | 21.37 € *Unit price with basic configuration Volume Discount | 53.56 € *Unit price with basic configuration | 14.00 € *Unit price with basic configuration Volume Discount | 34.59 € *Unit price with basic configuration Volume Discount | 24.43 € *Unit price with basic configuration | 14.12 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 15.94 € *Unit price with basic configuration Volume Discount | 16.04 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 15.26 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 11.36 € *Unit price with basic configuration Volume Discount | 12.65 € *Unit price with basic configuration Volume Discount | 208.52 € *Unit price with basic configuration | 181.78 € *Unit price with basic configuration Volume Discount | 7.09 € *Unit price with basic configuration Volume Discount | 16.04 € *Unit price with basic configuration Volume Discount | 17.63 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 15.45 € *Unit price with basic configuration Volume Discount | 27.13 € *Unit price with basic configuration | 24.17 € *Unit price with basic configuration | 14.96 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 19.89 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 19.66 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 8.41 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 27.21 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 100.28 € *Unit price with basic configuration Volume Discount | 38.28 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 102.74 € *Unit price with basic configuration | 31.48 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 18.77 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 11.37 € Special price *Unit price with basic configuration Promotional pricing | 8.89 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 11.11 € *Unit price with basic configuration |
| Min. Shipping Days | 8 Days | Same day | Same day | 6 Days | Same day | Same day | 6 Days | 6 Days | Same day | Same day | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 6 Days | Same day | 6 Days | Same day | Same day | 8 Days | 6 Days | 5 Days | 7 Days | 5 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | Same day | Same day | Same day | Same day | 6 Days | Same day | 6 Days | Same day | Same day | Same day | Same day | 6 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Screw Types | Taper for Pipe | Taper for Pipe | Meter / Unified / Whitworth / Sewing Machine | Unified | Meter | Meter / Unified | Sewing Machine | Meter | Meter / Unified / Whitworth / Sewing Machine | Meter / Unified | Meter | Meter / Unified | Trapezoid | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Meter / Unified | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Parallel for Pipes | Meter / Unified | Meter | Meter | Meter | Other | Meter | Other | - | Meter | Whitworth | Meter | Meter |
| Screw size (Nominal) | 1´-11 ～ 3/4-14 | R1 ～ R7/8 | No0UN ～ M48 | No.10-24UNC | M3 ～ M16 | 1UN ～ M56 | SM1/4 ～ SM15/64 | M2 ～ M24 | No0UN ～ M35 | No0UN ～ M20 | M5 ～ M36 | M1 ～ M12 | Tr8 ～ Tr18 | M3 ～ M12 | M8 ～ M12 | M3 ～ M10 | M3 ～ M10 | M3 ～ M12 | M3 ～ M24 | 1/2-20UNF ～ M24 | 1-8UNC ～ M56 | No.10-32UNF ～ M24 | M3 ～ M12 | M2 ～ M30 | - | M1.4 ～ M20 | M2 ～ M24 | M1.4 ～ M16 | M2 ～ M16 | M1.4 ～ M42 | M3 ～ M30 | R1 ～ R3/8 | G1 ～ G7/8 | M1 ～ No6UN | M1 ～ M45 | M1 ～ M4 | M6 ～ M12 | S0.1 ～ S1.4 | M1 ～ M10 | PG7 ～ PG13.5 | NPT1/2 ～ NPT1/8 | M4 | W1/2 | M3 ～ M6 | M3 ～ M6 |
| Pitch (P), Number of Threading(mm) | - | 11 ～ 28 | 0.25 ～ 80 | - | 0.5 ～ 2 | 0.25 ～ 48 | 20 ～ 56 | 0.25 ～ 3 | 0.25 ～ 80 | 0.25 ～ 80 | 0.5 ～ 2 | 0.25 ～ 56 | 1.5 ～ 4 | 0.5 ～ 1.75 | 0.75 ～ 1.5 | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 0.5 ～ 1.75 | 0.5 ～ 3 | 0.25 ～ 3 | 0.25 ～ 5.5 | 0.75 ～ 2 | 0.5 ～ 1.75 | 0.4 ～ 3.5 | - | 0.3 ～ 2.5 | 0.4 ～ 3 | 0.3 ～ 2 | 0.4 ～ 2 | 0.3 ～ 4.5 | 0.5 ～ 3.5 | 11 ～ 28 | 11 ～ 28 | 0.25 ～ 56 | 0.2 ～ 4.5 | 0.25 ～ 0.7 | 0.5 ～ 1 | 0.025 ～ 0.3 | 0.2 ～ 1.5 | 18 ～ 20 | 14 ～ 27 | 0.7 | 12 | 0.5 ～ 1 | 0.5 ～ 1 |
| Chamfer threads (Lcf) | 2.5P | 2.5P | 5P | 5P | 3P | 2.5P ～ 3P | 2.5P | 5P | 1.5P ～ 9P | 2P ～ 4P | 1.5P ～ 9P | 2P ～ 4P | - | 3P | 2.5 | 5 P | 1.5 P ～ 9 P | 2P ～ 4P | - | 5P | 1.5P ～ 2.5P | 5P | 2.5P | 2.5P | - | - | 5 P | 2.5P | 2.5P | 5P | 6P | 2.5P | 1.5P ～ 4P | 1P | 2P ～ 4P | 2.5P | - | - | 1P ～ 4P | - | - | - | 5P | 1.5P ～ 4P | 5P |
| Tool Material Type | High-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | - | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Alloy HSS | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | - | Powder high-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Cobalt HSS | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Powder high-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | - | - | - | High-speed steel | High-speed steel |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] |
| Tap Type | Tap for pipes | Tap for pipes | Point tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Hand Tap | Roll tap | Hand Tap | Roll tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Hand Tap | Roll tap | Die | Point tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Thread cutter | Thread cutter | Point tap | Spiral Tap | Spiral Tap | Point tap | Point tap | Tap for pipes | Tap for pipes | Roll tap | Roll tap | Roll tap | Thread-Cutting-Related Tool | Thread cutter | Roll tap | Tap for pipes | Die | Spiral Tap | Hand Tap | Hand Tap | Point tap |
| Hole type | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | - | For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole | For blind hole | For blind hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | - | - | - | - | - | - | - | For through hole / For blind hole | For blind hole |
| Coating Y/N | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | Available | - | Available | N/A | N/A | Available | Available | N/A | Available | - | Available | Available | N/A | N/A | N/A | Available | Available | N/A | Available | Available | Available | Available | N/A | N/A | Available | Available | N/A | N/A | Available | Available | - | - | - | - | N/A | N/A |
| Coating Type | - | Non-Coated | Non-Coated | - | - | Non-Coated | Non-Coated | Other | Non-Coated | TiN | - | TiCN | Non-Coated | - | TiCN | TiN | - | TiN | - | Other | Other | - | - | - | Nitriding Treatment | TiAlN | Non-Coated | TiN | Other | TiN | TiN | Non-Coated | Non-Coated | TiCN | TiCN | Non-Coated | Non-Coated | TiAlN | Other | - | - | - | - | - | - |
| Overall Length (L)(mm) | 55 ～ 95 | 55 ～ 170 | 30 ～ 185 | 60 | 46 ～ 95 | 30 ～ 205 | 42 ～ 65 | 80 ～ 200 | 30 ～ 145 | 30 ～ 105 | - | 60 ～ 200 | 90 ～ 225 | 46 ～ 82 | 82 | 46 ～ 150 | 46 ～ 75 | 80 ～ 150 | - | 34 ～ 120 | 34 ～ 250 | 60 ～ 120 | 46 ～ 82 | 42 ～ 135 | 39 ～ 58 | 39 ～ 105 | 40 ～ 120 | 34 ～ 95 | 40 ～ 95 | 34 ～ 175 | 100 ～ 200 | 55 ～ 95 | 55 ～ 170 | 30 ～ 62 | 30 ～ 220 | 30 ～ 52 | 120 ～ 140 | 45 | 30 ～ 75 | 85 ～ 105 | - | - | 85 | 46 ～ 62 | 46 ～ 62 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- NO.12-28UNF
- NO.12-24UNC
- S0.2
- NO.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- S0.3
- NO.3-56UNF
- NO.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- S0.5
- NO.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- S0.8
- NO.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- G1"-3"
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- UNC 3
- UNF 3
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- M3 - M18
- SM3/32
- M3.5
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- UNC 5
- №5-40UNC
- 5/8UN
- G5/8
- G 5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- M5 - M12
- M5～13
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- M5.5
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- UNC 6
- UNF 6
- UNJC 6
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8UN
- G7/8
- G 7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- 7/16-20UNF
- 7/16-14UNC
- SM7/32
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- SM9/64
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- Tr10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- SM11/32
- SM11/64
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- Tr12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- M15
- SM15/64
- M16
- MF16
- Mf16
- Tr16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- M19
- M20
- MF20
- Mf20
- M20 x 1.5
- M21
- M22
- MF22
- M23
- M24
- MF24
- M25
- MF25
- Mf25
- M25 x 1.5
- M26
- MF26
- M27
- MF27
- M28
- MF28
- M30
- MF30
- M32
- Mf32
- M33
- M34
- M35
- M36
- M37
- M38
- M39
- M40
- M42
- M45
- M48
- M52
- M56
- M64
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- OSG (68)
- YAMAWA MFG (36)
- CARMEX (31)
- SKC (18)
- NACHI(FUJIKOSHI) (6)
- TRUSCO NAKAYAMA (3)
- NS TOOL (2)
- TANOI MFG (2)
- WALTER PROTOTYP (1)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GUHRING (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.