Screw-Hole-Related Tools（work material：Stainless Steel (JIS-SUS)）

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

• • Promotional pricing

  

  Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

  YAMAWA MFG

  Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spiral Tap Series, for Stainless EX-SUS-SFT

  OSG

  Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.81 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spiral Tap for Stainless Steel SU+SP / SU-SP

  YAMAWA MFG

  Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
  [Features]
  · For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
  · Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
  · Stable scrap is ejected and a good finish is realized.
  · Capable of machining both synchronously and asynchronously.
  · Machining speed of 10 m/min or less is recommended.
  [Applications]
  Optimal for machining extremely viscous or work-hardened work material.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  A Tap Series Point Tap Long Shank A-LT-POT

  OSG

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

  Select to compare

  Configure now
  Starting from∗ ：	23.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Groove-Free Tap Series, Tin Coated, TIN-NRT

  OSG

  Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

  OSG

  Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

  Select to compare

  Configure now
  Starting from∗ ：	24.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap for Nickel Base Alloy ZEN-B

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  SG Spiral Tap SGSP

  NACHI(FUJIKOSHI)

  [Features]
  -Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.

  Select to compare

  Configure now
  Starting from∗ ：	53.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】

  MISUMI

  [Features]
  -Can be used for through hole machining
  -Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.
  -Excellent abrasion resistance and resistance to chip welding due to TiN coating
  -Long shank, ideal for drilling deep tapped holes (G-LS-POT).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High-Speed Steel Hand Tap【10 Pieces Per Package】

  MISUMI

  [Features]
  A general purpose hand tap made from uncoated high speed steel
  High versatility, suitable for a wide range of applications and materials such as aluminium and general steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	34.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand Tap Series, for Stainless Steel, EX-SUS-HT

  OSG

  Suited for machining stainless steel, heat-resistant steel, and nickel manganese steel. Cut carbon steel and alloy steel as well.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT

  OSG

  Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

  Select to compare

  Configure now
  Starting from∗ ：	24.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  A Tap Series for Pipes Point Tap A-POT

  OSG

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  A Tap Series, Spiral Tap, A-SFT

  OSG

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Short Spiral Tap for Stainless Steel SU-S-SP

  YAMAWA MFG

  [Features]
  · For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.

  Select to compare

  Configure now
  Starting from∗ ：	17.85 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Short Spiral Tap for Deep Holes S-SP

  YAMAWA MFG

  Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters

  CARMEX

  For both internal and external threading
  
  [Features]
  · Ultrafine particle carbide and new type three-layer PVD coating

  Select to compare

  Configure now
  Starting from∗ ：	208.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

  MISUMI

  [Features]
  -Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
  -Reduced cutting load due to short flute length (3 webs)
  -Enables effective thread cutting right into the corners of blind holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	181.78 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  MT Series High-Speed Steel Point Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
  The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
  [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spiral Tap Series, Tin Coated, TIN-SFT

  OSG

  The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spiral Tap Series, V Coated, V-SFT

  OSG

  Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT

  OSG

  Ideal for deep hole drilling of stainless steel beyond 2D.
  Working material: Stainless steel / copper / resin
  Coating: Surface treatment, steam oxide treatment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Point Tap Series, Tin Coated, TIN-POT

  OSG

  Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.45 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

  OSG

  Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

  Select to compare

  Configure now
  Starting from∗ ：	27.13 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Point Tap Series, for Thin Plates, EX-SS-POT

  OSG

  Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT

  OSG

  Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.40 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tapered Tap Series For Pipes, For Stainless Steel Use EX-SUS-TPT

  OSG

  It can be used to machine female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.

  Select to compare

  Configure now
  Starting from∗ ：	24.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

  OSG

  Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.89 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Groove-Free Tap Series X Performer S-XPF

  OSG

  When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
  * M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Groove-Free Tap Series for Steel HRT

  OSG

  Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MMTS Micro Threading Tool

  NS TOOL

  Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	100.28 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  IT-Toughlet C Coated

  TANOI MFG

  Rise tap with a correct bite without pitch or angle errors.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	38.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Use SU Spiral-Type

  SKC

  [Specifications]
  · Shape: Spiral tap
  · Screw type: metric
  · Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron (BsC) [○] /Bronze (PB) [○] /Aluminum Rolled Material (AL) [○] /Aluminum Alloy Casting (AC, ADC) [○] /Zinc Alloy Casting (ZDC) [○]
  · Material Details: SKH

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel Hand Tap SU-HT

  YAMAWA MFG

  Hand tap suitable for machining extremely viscous or work-hardened work material.
  [Features]
  Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
  · 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
  · Capable of machining both synchronously and asynchronously.
  · Machining speed of 5 m/min or less is recommended.
  [Applications]
  Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.89 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thread Cutting Tool (for Unified Threads) MMTU

  NS TOOL

  [Features]
  ・ Adopts a blade shape with an emphasis on sharpness, improving machining precision.
  ・ Adopts MUGEN Coating Premium for the realization of a long life.
  ・ For Unified Standard threads
  

  Select to compare

  Configure now
  Starting from∗ ：	108.22 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

  MISUMI

  Threading cutters that enable the high-speed stable processing are available at special prices

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	112.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

  MISUMI

  The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	222.23 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  TS Coated Carbide Threading Cutter, for Internal Metric Threads

  MISUMI

  [Features]
  --Tungsten carbide thread cutter for stable high speed machining
  -Can be used for both blind holes and through holes
  -
  -It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	181.83 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】

  MISUMI

  [Features]
  -Used for tapping that produces no chips
  -Suitable for a wide range of materials, from general steel to non-ferrous alloys
  -Excellent abrasion resistance and chip weld resistance due to TiN coating.

  Select to compare

  Configure now
  Starting from∗ ：	56.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

  MISUMI

  [Features]
  -Multi-use tap for all materials from general steel, heat treated steel to stainless steel
  -Efficient chip removal due to short thread form and special flute shape.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	52.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】

  MISUMI

  The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  MT Series High-Speed Steel Spiral Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
  The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
  [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Taflet for Steel TFST

  NACHI(FUJIKOSHI)

  Suitable for thread rolling of mild steel, stainless steel below 20HRC of hardness.

  Select to compare

  Configure now
  Starting from∗ ：	22.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  G Spiral Tap for Deep Holes in Stainless Steel GSPS

  NACHI(FUJIKOSHI)

  Suited for stainless steel and materials that produce a lot of swarf.

  Select to compare

  Configure now
  Starting from∗ ：	34.33 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

  OSG

  Allows internal threading of stainless steel with a water soluble cutting fluid.
  Tool material: Vanadium high speed steel
  Hole type: For blind holes
  Material: General steel/stainless steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...