Screw-Hole-Related Tools（work material：Quenched and tempered steel (25 to 35 HRC)）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Hand Tap HT (Cutting Tap)
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.- Volume Discount
- Stock
Configure nowStarting from∗ ： 6.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
SG Spiral Tap SGSP
NACHI(FUJIKOSHI)
[Features]
-Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.Configure nowStarting from∗ ： 30.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, for Difficult-to-Machine Material, CPM-POT
OSG
Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Configure nowStarting from∗ ： 9.49 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Groove-Free Tap Series X Performer S-XPF
OSG
When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.- Volume Discount
Configure nowStarting from∗ ： 19.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX
YAMAWA MFG
Suitable for tapping high carbon steel like S55C etc. Has undergone oxidation treatment.- Volume Discount
Configure nowStarting from∗ ： 11.36 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.- Volume Discount
Configure nowStarting from∗ ： 181.78 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT
OSG
Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Configure nowStarting from∗ ： 11.72 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Hand Tap Series, for Difficult-to-Machine Material, CPM-HT
OSG
Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Configure nowStarting from∗ ： 11.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.Configure nowStarting from∗ ： 27.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series VP New Roll VP-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowMin. Shipping Days ： 6 Days -
MMTS Micro Threading Tool
NS TOOL
Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken- Volume Discount
Configure nowStarting from∗ ： 100.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Flute Tap SP (N-SP)
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.- Volume Discount
Configure nowStarting from∗ ： 8.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Titanium coating point tab PO-V (N-PO-V)
YAMAWA MFG
Coated point tap suitable for low carbon steel to high carbon steel machining.
[Features]
· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
[Applications]
· Can process both synchronously and asynchronously.
· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).- Volume Discount
Configure nowStarting from∗ ： 25.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Plus Series Spiral Tap +SP (N+SP)
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).- Volume Discount
Configure nowStarting from∗ ： 17.48 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
Threading cutters that enable the high-speed stable processing are available at special prices- Volume Discount
Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.- Volume Discount
Configure nowStarting from∗ ： 222.23 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
TS Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
--Tungsten carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-
-It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
Configure nowStarting from∗ ： 181.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】
MISUMI
[Features]
-Multi-use tap for all materials from general steel, heat treated steel to stainless steel
-Efficient chip removal due to short thread form and special flute shape.- Volume Discount
Configure nowStarting from∗ ： 52.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
MT Series High-Speed Steel Spiral Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Configure nowStarting from∗ ： 7.81 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
MT Series High-Speed Steel Point Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Configure nowStarting from∗ ： 7.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
OSG
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin- Volume Discount
Configure nowStarting from∗ ： 139.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT
OSG
Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.
Tool material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Material: General steel / heat-treated steel
Coating: Surface treatment for steel.Configure nowStarting from∗ ： 17.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT
OSG
Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Configure nowStarting from∗ ： 84.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Tin Coated, TIN-HT
OSG
Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.- Volume Discount
Configure nowStarting from∗ ： 16.26 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Planet Cutter Series MC-Planet Cutters PNGT
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.Configure nowStarting from∗ ： 205.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC
OSG
By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.Configure nowStarting from∗ ： 165.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Ultra Synchronizing Taps, HS-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.- Volume Discount
Configure nowStarting from∗ ： 30.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.- Volume Discount
Configure nowStarting from∗ ： 21.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT
OSG
Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Configure nowStarting from∗ ： 40.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes TIN Coated TIN-TPT
OSG
TIN coating with excellent solvent resistance, abrasion resistance has been applied.- Volume Discount
Configure nowStarting from∗ ： 30.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT
OSG
TIN coating with excellent solvent resistance, abrasion resistance has been applied.- Volume Discount
Configure nowStarting from∗ ： 31.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT
OSG
Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Configure nowStarting from∗ ： 29.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT
OSG
Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Configure nowStarting from∗ ： 44.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT
OSG
Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forgingConfigure nowStarting from∗ ： 60.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel-Use SU Spiral-Type
SKC
[Specifications]
· Shape: Spiral tap
· Screw type: metric
· Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron (BsC) [○] /Bronze (PB) [○] /Aluminum Rolled Material (AL) [○] /Aluminum Alloy Casting (AC, ADC) [○] /Zinc Alloy Casting (ZDC) [○]
· Material Details: SKH- Volume Discount
Configure nowStarting from∗ ： 18.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel Hand-Type
SKC
Adds a rake angle for stainless steel to the conventional SKH tap along with oxidation treatment. The bite section is for medium taps only.- Volume Discount
Configure nowStarting from∗ ： 15.88 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP
YAMAWA MFG
Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on carbon steel and alloy steel, processing in vertical and horizontal directions.- Volume Discount
Configure nowStarting from∗ ： 36.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL
YAMAWA MFG
We have adopted the side through-hole shape by dry machining and ultra-high-speed machining.- Volume Discount
Configure nowStarting from∗ ： 36.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS
YAMAWA MFG
Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the vertical direction processing.- Volume Discount
Configure nowStarting from∗ ： 36.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP
YAMAWA MFG
Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the horizontal direction processing.- Volume Discount
Configure nowStarting from∗ ： 36.15 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
MC - Helical Cutter MC-HLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.Configure nowStarting from∗ ： 253.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel Hand Tap SU-HT
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 5 m/min or less is recommended.
[Applications]
Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.- Volume Discount
Configure nowStarting from∗ ： 8.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap for Titanium Alloy, for Through Hole ZET-P
YAMAWA MFG
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.- Volume Discount
Configure nowStarting from∗ ： 21.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap for Titanium Alloy ZET-B
YAMAWA MFG
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.- Volume Discount
Configure nowStarting from∗ ： 21.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap for Nickel Base Alloy ZEN-B
YAMAWA MFG
A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.- Volume Discount
Configure nowStarting from∗ ： 21.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | NACHI(FUJIKOSHI) | OSG | OSG | YAMAWA MFG | MISUMI | OSG | OSG | OSG | OSG | NS TOOL | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SKC | SKC | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | Point Tap Series, for Difficult-to-Machine Material, CPM-POT | Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | TS Coated Carbide Threading Cutter, for Internal Metric Threads | Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】 | Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC | Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT | Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT | Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC | Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT | Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT | Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT | Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT | Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT | Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT | HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP | HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL | HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS | HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP | |||||||||||||||||||||||
| Starting from∗ | 6.44 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 30.24 € *Unit price with basic configuration | 9.49 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 19.66 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 11.36 € *Unit price with basic configuration Volume Discount | 181.78 € *Unit price with basic configuration Volume Discount | 11.72 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 11.08 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 27.13 € *Unit price with basic configuration | - Volume Discount | 100.28 € *Unit price with basic configuration Volume Discount | 8.94 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 25.02 € *Unit price with basic configuration Volume Discount | 17.48 € *Unit price with basic configuration Volume Discount | 110.87 € *Unit price with basic configuration Volume Discount | 222.23 € *Unit price with basic configuration Volume Discount | 181.83 € *Unit price with basic configuration Volume Discount | 52.15 € *Unit price with basic configuration Volume Discount | 7.81 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.00 € *Unit price with basic configuration Volume Discount | 139.70 € *Unit price with basic configuration Volume Discount | 17.33 € *Unit price with basic configuration | 84.11 € *Unit price with basic configuration Volume Discount | 16.26 € *Unit price with basic configuration Volume Discount | 205.83 € *Unit price with basic configuration | 165.90 € *Unit price with basic configuration | 30.20 € *Unit price with basic configuration Volume Discount | 21.73 € *Unit price with basic configuration Volume Discount | 40.05 € *Unit price with basic configuration Volume Discount | 30.48 € *Unit price with basic configuration Volume Discount | 31.88 € *Unit price with basic configuration Volume Discount | 29.98 € *Unit price with basic configuration Volume Discount | 44.76 € *Unit price with basic configuration Volume Discount | 60.18 € *Unit price with basic configuration | 18.77 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 15.88 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 253.22 € *Unit price with basic configuration | 8.89 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 21.37 € *Unit price with basic configuration Volume Discount | 21.37 € *Unit price with basic configuration Volume Discount | 21.37 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | 6 Days | Same day | Same day | 8 Days | 7 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 8 Days | 5 Days | 7 Days | 5 Days | 5 Days | Same day | 5 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | Same day | 8 Days | 8 Days | 8 Days | 7 Days | 8 Days | Same day | 6 Days | 6 Days | 6 Days |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Screw Types | Meter / Unified / Sewing Machine | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Other | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | No.0-80UNF ～ M48 | M2 ～ M24 | M1.4 ～ M48 | M1 ～ M45 | M3 ～ M16 | M1.4 ～ M20 | M1.4 ～ M48 | M3 ～ M48 | M3 ～ M30 | M1 ～ M12 | S0.1 ～ S1.4 | M3 ～ M12 | M3 ～ M12 | M2.2 | M3 ～ M20 | M2 ～ M12 | M3 ～ M12 | M2 ～ M12 | M2 ～ M24 | M2 ～ M24 | - | M3 ～ M12 | M16 | M2 ～ M24 | - | - | M3 ～ M14 | M3 ～ M14 | M8 ～ M12 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | M4 ～ M14 | M4 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | 1015 ～ 32506N300M | M3 ～ M6 | M3 ～ M20 | M3 ～ M20 | M3 ～ M20 |
| Pitch (P), Number of Threading(mm) | 0.2 ～ 7 | 0.25 ～ 3 | 0.3 ～ 5 | 0.2 ～ 4.5 | 0.5 ～ 2 | 0.3 ～ 2.5 | 0.3 ～ 5 | 0.5 ～ 5 | 0.5 ～ 3.5 | 0.25 ～ 56 | 0.025 ～ 0.3 | 0.5 ～ 1.25 | 0.5 ～ 1.75 | 0.45 | 0.5 ～ 2.5 | 0.4 ～ 1.75 | 0.5 ～ 1.75 | 0.4 ～ 1.75 | 0.4 ～ 3 | 0.4 ～ 3 | 0.4 ～ 32 | 0.5 ～ 1.75 | 2 | 0.4 ～ 3 | 1 ～ 19 | 0.5 ～ 3 | 0.5 ～ 2 | 0.5 ～ 2 | 1.25 ～ 1.75 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 19 | 11 ～ 28 | 0.7 ～ 2 | 0.7 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | - | 0.5 ～ 1 | 0.5 ～ 2.5 | 0.5 ～ 2.5 | 0.5 ～ 2.5 |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 2.5 | 5P | 2P ～ 4P | 2.5P | - | 3P | 2P ～ 5P | 6P | 2P ～ 4P | - | 2.5P | 5P | 2.5P | - | - | - | 2.5 P | 2.5 P | 5 P | - | 2.5P | 3P | 1.5P ～ 5P | - | - | 6P | 5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | - | 5P | 2.5P | 5P | 2.5P | 2.5P | - | 1.5P ～ 4P | 5P | 3P | 3P |
| Tool Material Type | High-speed steel | Alloy HSS | Powder high-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | High-speed steel | Carbide | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Carbide | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Cobalt HSS | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | - | - | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | High-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel |
| work material | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] |
| Tap Type | Hand Tap | Spiral Tap | Point tap | Roll tap | Spiral Tap | Thread cutter | Spiral Tap | Hand Tap | Point tap | Roll tap | Thread cutter | Spiral Tap | Point tap | Spiral Tap | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Spiral Tap | Point tap | Thread cutter | Spiral Tap | Spiral Tap | Hand Tap | Thread cutter | Thread cutter | Point tap | Point tap | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Spiral Tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Thread cutter | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For blind hole | - | For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | For through hole / For blind hole | For through hole | For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole | For blind hole | For blind hole |
| Coating Y/N | N/A | Available | N/A | Available | N/A | Available | N/A | N/A | Available | Available | Available | N/A | Available | N/A | Available | Available | Available | N/A | N/A | N/A | Available | Available | N/A | Available | Available | Available | Available | Available | N/A | Available | Available | N/A | N/A | N/A | - | - | Available | Available | Available | Available | Available | N/A | N/A | N/A | N/A |
| Coating Type | - | TiCN | Non-Coated | TiCN | - | TiAlN | Non-Coated | Non-Coated | TiN | TiCN | TiAlN | - | TiN | - | TiAlN | TiAlN | For High Hardness (Silicon Group) | - | Non-Coated | Non-Coated | For High Hardness (Silicon Group) / Other | TiCN | Non-Coated | TiN | TiN | TiAlN | TiN | TiN | Non-Coated | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | - | - | TiCN | TiCN | TiCN | TiCN | TiN | - | - | - | - |
| Overall Length (L)(mm) | 36 ～ 185 | 40 ～ 120 | 34 ～ 185 | 30 ～ 220 | 46 ～ 95 | 39 ～ 105 | 34 ～ 185 | 46 ～ 185 | 100 ～ 200 | 30 ～ 82 | 45 | 46 ～ 82 | 46 ～ 82 | 42 | 57 ～ 115 | 58 ～ 73 | 48 ～ 74 | 40 ～ 82 | 40 ～ 120 | 40 ～ 120 | 40 | 46 ～ 82 | 150 | 40 ～ 120 | 80 ～ 210 | 60 ～ 120 | 46 ～ 88 | 46 ～ 88 | 150 | 55 ～ 95 | 55 ～ 95 | 55 ～ 95 | 62 ～ 95 | 120 ～ 150 | - | 52 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 70 ～ 200 | 46 ～ 62 | 46 ～ 105 | 46 ～ 105 | 46 ～ 105 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- YAMAWA MFG (34)
- OSG (23)
- NACHI(FUJIKOSHI) (4)
- CARMEX (2)
- NS TOOL (2)
- SKC (2)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- TANOI MFG (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GUHRING (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.