Screw-Hole-Related Tools（Page 2）

Search by sub-category

661

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Thread repair kit

STAHLWILLE

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	175.33 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Threaded flange

FEIN

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.52 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SANDVIK CoroTap 200 Cutting Tap with Spiral Point

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	181.78 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

MT Series High-Speed Steel Point Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.09 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT

OSG

Suitable for threading hardened steel up to 55 HRC.
Material: High hardness steel up to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

OSG

In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

Select to compare

Configure now
Starting from^∗ ：	28.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Tin Coated, TIN-SFT

OSG

The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, V Coated, V-SFT

OSG

Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.63 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT

OSG

Ideal for deep hole drilling of stainless steel beyond 2D.
Working material: Stainless steel / copper / resin
Coating: Surface treatment, steam oxide treatment.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.88 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Spatter Removal Tap Series, for Female Thread Repair / Removal of Weld Spatters, SR-HT

OSG

Ideal for removing weld spatter and cutting chips inside the internal thread.
Tool material: vanadium high-speed steel
Coating: surface treatment, uncoated
Number of threads on chamfer: 5P
Accuracy (grade) 0.06

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.39 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand Tap Series, Super Hard Hand Tap, OTT

OSG

Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.

Select to compare

Configure now
Starting from^∗ ：	60.78 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Super Planet DR-PNAC

OSG

A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity

Select to compare

Configure now
Starting from^∗ ：	295.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Tin Coated, TIN-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Select to compare

Configure now
Starting from^∗ ：	27.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Thin Plates, EX-SS-POT

OSG

Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT

OSG

Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tapered Tap Series For Pipes, For Stainless Steel Use EX-SUS-TPT

OSG

It can be used to machine female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.

Select to compare

Configure now
Starting from^∗ ：	24.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes Spiral Fluted SFT-TPT

OSG

It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.

Select to compare

Configure now
Starting from^∗ ：	24.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Parallel Tap Series for Pipes General Applications SPT

OSG

For use when machining parallel female pipe taper threads and female pipe parallel threads

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.96 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.89 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series X Performer S-XPF

OSG

When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.66 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series for Steel HRT

OSG

Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.41 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Groove-Free Tap Series Carbide New Roll Tap Long Shank OT-LT-NRT

OSG

Suitable for massive tapping of aluminum alloy/magnesium alloy/copper alloy by high precision automatic machine.

Select to compare

Configure now
Starting from^∗ ：	117.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Nut Tap Series Nut Tap NT

OSG

Primarily for thread cutting on nuts. Takes the workability of nuts into consideration with a long screw thread section and shank section and is capable of continuous operation until the nuts fill the shank section.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.21 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MMTS Micro Threading Tool

NS TOOL

Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	100.28 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap remover Plus (long size)

EIKOSHA

Dedicated drill for removing broken high speed steel taps

Select to compare

Configure now
Starting from^∗ ：	104.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

T shaped tap holder

TRUSCO NAKAYAMA

[Characteristics]
Features an easy-to-use T-shaped handle.
[Application]
For tap threading operations.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hexagonal Re-Threading Die For Gas Pipe (PS Screw)

TRUSCO NAKAYAMA

[Characteristics]
For bolt and screw clean out.
Used for screw thread repair.
Can be operated with adjustable spanner.
Replacement product for round dies used when repairing screw threads.
[Use]
- Fixing PS (Straight) threads.

Select to compare

Configure now
Starting from^∗ ：	81.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Electrodeposition Diamond Tool for Grinding Centering, Seratap, ED-PNT

OSG

[Features]
-The tool attached to the pilot hole shaft performs a self-rotating and orbital motion to grind a thread with a pitch.
-The X, Y and Z axes are fed simultaneously, so the requirement for use is that the machine is equipped with a 3-axis simultaneous control mechanism.

Select to compare

Configure now
Starting from^∗ ：	115.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Screw Cutting Die Series, Tapered Screw Cutting Round Dies for Pipes, TPD-H-PT

OSG

Select to compare

Configure now
Starting from^∗ ：	136.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

IT-Toughlet C Coated

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.28 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

T Type Tap Holder

ISHIHASHI

For tap threading

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Pg Conduit Thread Tap (German Standard)

SKC

It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency

Select to compare

Configure now
Starting from^∗ ：	102.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Gas Pipe Solid Die Taper NPT

SKC

[Features]
Threads (dies) for machining external threads for American pipes in gas pipelines.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.48 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Use SU Spiral-Type

SKC

[Specifications]
· Shape: Spiral tap
· Screw type: metric
· Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron (BsC) [○] /Bronze (PB) [○] /Aluminum Rolled Material (AL) [○] /Aluminum Alloy Casting (AC, ADC) [○] /Zinc Alloy Casting (ZDC) [○]
· Material Details: SKH

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.77 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hand Tap - Whitworth Screw for Coarse Thread (55° Angle)

SKC

Used for General Tapping

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.37 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

21 PCS Tap & Die Set

H & H

Uses high-carbon steel material with excellent durability. For professional use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.14 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hand Tap / Drill Set

Hand Tap / Drill Set【21 Pieces Per Package】

ISHIHASHI

Set of 14 Medium Hand Taps and 7 Pilot Hole Drills in Case

Select to compare

Configure now
Starting from^∗ ：	149.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737

GUHRING

[Features]
· Threading is performed with helical cutting.
· If the pitch is the same, one unit can process threads with different diameters.
· Both right-handed and left-handed female threads can be machined.

Select to compare

Configure now
Starting from^∗ ：	254.77 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Stainless Steel Hand Tap SU-HT

YAMAWA MFG

Hand tap suitable for machining extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 5 m/min or less is recommended.
[Applications]
Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.89 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap for Titanium Alloy ZET-B

YAMAWA MFG

A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Plus Series Point Tap +PO (N+PO)

YAMAWA MFG

* N+SP will be replaced with +SP as soon as there is no more in stock.

Select to compare

Configure now
Starting from^∗ ：	11.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Shank Spiral Tap LS-SP(LS-N-SP)

YAMAWA MFG

* LS-N-SP will switch to LS-SP as soon as the stock runs out.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare
Brand	STAHLWILLE	FEIN	SANDVIK	SANDVIK	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	EIKOSHA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	OSG	OSG	TANOI MFG	ISHIHASHI	SKC	SKC	SKC	SKC	H & H	ISHIHASHI	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Thread repair kit	Threaded flange	SANDVIK CoroTap 200 Cutting Tap with Spiral Point	SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes	TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads	MT Series High-Speed Steel Point Tap	Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT	Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT	Spiral Tap Series, Tin Coated, TIN-SFT	Spiral Tap Series, V Coated, V-SFT	Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT	Spatter Removal Tap Series, for Female Thread Repair / Removal of Weld Spatters, SR-HT	Hand Tap Series, Super Hard Hand Tap, OTT	Planet Cutter Series Super Planet DR-PNAC	Point Tap Series, Tin Coated, TIN-POT	Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT	Point Tap Series, for Thin Plates, EX-SS-POT	Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT	Tapered Tap Series For Pipes, For Stainless Steel Use EX-SUS-TPT	Taper Tap Series for Pipes Spiral Fluted SFT-TPT	Parallel Tap Series for Pipes General Applications SPT	Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT	Groove-Free Tap Series X Performer S-XPF	Groove-Free Tap Series for Steel HRT	Groove-Free Tap Series Carbide New Roll Tap Long Shank OT-LT-NRT	Nut Tap Series Nut Tap NT	MMTS Micro Threading Tool	Tap remover Plus (long size)	T shaped tap holder	Hexagonal Re-Threading Die For Gas Pipe (PS Screw)	Electrodeposition Diamond Tool for Grinding Centering, Seratap, ED-PNT	Screw Cutting Die Series, Tapered Screw Cutting Round Dies for Pipes, TPD-H-PT	IT-Toughlet C Coated	T Type Tap Holder	Pg Conduit Thread Tap (German Standard)	Gas Pipe Solid Die Taper NPT	Stainless Steel-Use SU Spiral-Type	Hand Tap - Whitworth Screw for Coarse Thread (55° Angle)	21 PCS Tap & Die Set	Hand Tap / Drill Set【21 Pieces Per Package】	Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737	Stainless Steel Hand Tap SU-HT	Spiral Tap for Titanium Alloy ZET-B	Plus Series Point Tap +PO (N+PO)	Long Shank Spiral Tap LS-SP(LS-N-SP)
Starting from^∗	175.33 € *Unit price with basic configuration Volume Discount	9.52 € *Unit price with basic configuration Volume Discount	-	-	181.78 € *Unit price with basic configuration Volume Discount	7.09 € *Unit price with basic configuration Volume Discount	83.34 € *Unit price with basic configuration Volume Discount	28.34 € *Unit price with basic configuration	16.04 € *Unit price with basic configuration Volume Discount	17.63 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.88 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	8.39 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	60.78 € *Unit price with basic configuration	295.75 € *Unit price with basic configuration	15.45 € *Unit price with basic configuration Volume Discount	27.13 € *Unit price with basic configuration	7.61 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	29.40 € *Unit price with basic configuration Volume Discount	24.17 € *Unit price with basic configuration	24.17 € *Unit price with basic configuration	14.96 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	19.89 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	19.66 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	8.41 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	117.30 € *Unit price with basic configuration	27.21 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	100.28 € *Unit price with basic configuration Volume Discount	104.74 € *Unit price with basic configuration	18.43 € *Unit price with basic configuration	81.43 € *Unit price with basic configuration	115.92 € *Unit price with basic configuration	136.50 € *Unit price with basic configuration	38.28 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.42 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	102.74 € *Unit price with basic configuration	31.48 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.77 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	11.37 € Special price *Unit price with basic configuration Promotional pricing	42.14 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	149.56 € Special price *Unit price with basic configuration Promotional pricing	254.77 € *Unit price with basic configuration	8.89 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	21.54 € *Unit price with basic configuration Volume Discount	11.11 € *Unit price with basic configuration	25.00 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	3 Days	8 Days	5 Days	5 Days	7 Days	5 Days	6 Days	6 Days	6 Days	Same day	Same day	Same day	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	Same day	Same day	Same day	Same day	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	Same day	Same day	Same day	Same day	Same day	8 Days	Same day	6 Days	6 Days	6 Days
Screw Types	-	-	Meter / Unified / Whitworth	Meter / Unified / Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Taper for Pipe	Parallel for Pipes	Meter / Unified	Meter	Meter	Meter	Meter	Other	-	-	-	Other	Taper for Pipe	Meter	Meter	Other	-	Meter	Whitworth	-	-	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	-	-	G 1" ～ MF30	G 1" ～ M64	M1.4 ～ M20	M2 ～ M24	M3 ～ M12	M8	M1.4 ～ M16	M2 ～ M16	M2.5 ～ M10	M5 ～ M12	M1.4 ～ M20	M6 ～ M12	M1.4 ～ M42	M3 ～ M30	M1.4 ～ M12	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	G1 ～ G7/8	M1 ～ No6UN	M1 ～ M45	M1 ～ M4	M3 ～ M12	M6 ～ M12	S0.1 ～ S1.4	M3 ～ M12	M4～6	R1/2	-	R1 ～ R3/8	M1 ～ M10	M6	PG7 ～ PG13.5	NPT1/2 ～ NPT1/8	M4	W1/2	-	-	M6 ～ M20	M3 ～ M6	M3 ～ M16	M3 ～ M6	M8 ～ M16
Pitch (P), Number of Threading(mm)	-	-	-	-	0.3 ～ 2.5	0.4 ～ 3	0.5 ～ 1.75	1.25	0.3 ～ 2	0.4 ～ 2	0.45 ～ 1.5	0.8 ～ 1.25	0.3 ～ 2.5	1 ～ 1.75	0.3 ～ 4.5	0.5 ～ 3.5	0.3 ～ 1.75	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	0.25 ～ 56	0.2 ～ 4.5	0.25 ～ 0.7	0.5 ～ 1.75	0.5 ～ 1	0.025 ～ 0.3	-	-	14	0.5 ～ 2	11 ～ 28	0.2 ～ 1.5	-	18 ～ 20	14 ～ 27	0.7	12	-	-	1 ～ 2.5	0.5 ～ 1	0.5 ～ 2	0.5 ～ 1	1 ～ 2
Chamfer threads (Lcf)	-	-	-	-	-	5 P	2.5P ～ 5P	5P	2.5P	2.5P	2.5P	5P	1.5P ～ 3P	-	5P	6P	5P	2.5P	2.5P	2.5P	1.5P ～ 4P	1P	2P ～ 4P	2.5P	2P	-	-	-	-	-	-	-	1P ～ 4P	-	-	-	-	5P	-	-	-	1.5P ～ 4P	3P	5P	2.5P
Tool Material Type	-	-	-	-	Carbide	Cobalt HSS	Carbide	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	-	High-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel / Vanadium High-Speed Steel	High-speed steel	Carbide	High-speed steel	Carbide	Carbide	-	Alloy HSS	-	High-speed steel	High-speed steel	-	High-speed steel	-	-	-	-	-	Carbide	High-speed steel	Powder high-speed steel	High-speed steel	High-speed steel
work material	-	-	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Quenched and tempered steel (45 to 55 HRC)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	-	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]
Tap Type	-	-	-	-	Thread cutter	Point tap	Hand Tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Modification/removal Tool	Hand Tap	Thread cutter	Point tap	Point tap	Point tap	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Roll tap	Roll tap	Thread-Cutting-Related Tool	Thread cutter	Modification/removal Tool	Tap wrench	Die	Thread-Cutting-Related Tool	Die	Roll tap	Tap wrench	Tap for pipes	Die	Spiral Tap	Hand Tap	Thread-Cutting-Related Tool	Thread-Cutting-Related Tool	Thread cutter	Hand Tap	Spiral Tap	Point tap	Spiral Tap
Hole type	-	-	-	-	For through hole / For blind hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole
Coating Y/N	-	-	-	-	Available	N/A	Available	Available	Available	Available	N/A	N/A	N/A	Available	Available	Available	N/A	N/A	N/A	N/A	N/A	Available	Available	N/A	N/A	N/A	Available	Available	-	-	-	N/A	Available	N/A	-	-	-	-	N/A	N/A	Available	N/A	N/A	N/A	N/A
Coating Type	-	-	-	-	TiAlN	Non-Coated	TiCN	Other	TiN	Other	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiN	TiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	TiAlN	Other	-	-	-	Non-Coated	Other	Non-Coated	-	-	-	-	Non-Coated	Non-Coated	TiCN	-	-	-	-
Overall Length (L)(mm)	-	-	40 ～ 224	16 ～ 315	39 ～ 105	40 ～ 120	46 ～ 82	70	34 ～ 95	40 ～ 95	44 ～ 75	60 ～ 80	34 ～ 105	62 ～ 89	34 ～ 175	100 ～ 200	34 ～ 82	55 ～ 95	55 ～ 95	55 ～ 95	55 ～ 170	30 ～ 62	30 ～ 220	30 ～ 52	100 ～ 150	120 ～ 140	45	40 ～ 80	61	-	50 ～ 80	-	30 ～ 75	-	85 ～ 105	-	-	85	-	-	54 ～ 102	46 ～ 62	46 ～ 95	46 ～ 62	100 ～ 200