Full Text Search
Loading...
Search Results “make to order”
Products
-
Locating pins / round, diamond-shaped / with collar / chamfered flat head / external thread
MISUMI
Shouldered and Tapered Type has been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 500 pcs., 5th day shipping is available.- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Locating pins / round, diamond-shaped / small, round head / press-fit spigot
MISUMI
For High Hardness Stainless Steel Sphere Small Head, the configurable range of dimensions has been further widened and the number of available alterations has been increased. For orders of up to 1,000 pcs., 7th day shipping is available.- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Zipper Tubing (Braided Shield / For Movable Parts)
MISUMI
Zipper sleeve, which combines flame-retardant PVC and shield mesh The shield has a mesh structure and is effective for use in movable parts. High mating strength can be obtained by using dedicated tools. Ideal for cable protection that requires a high sealing effect- Volume Discount
- Flame-Retardant
- Flex-Resistant
- EMI Countermeasure
Configure nowStarting from∗ ： 34.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 9 Days -
Shaft Collar - I.D. Selectable, Thickness/O.D. Configurable, Set Screw
MISUMI
[New Product in March 2022]
The thickness and outer diameter can be selected according to the mounting space.
Use this product to increase the tightening force and save space.- 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Configure now
Min. Shipping Days ： 20 Days -
GANTER
Levelling elements GN 355 are used for levelling and adjustment in machines and equipment.
They consist of a levelling screw, a cylinder screw with disk and a spherical washer. After making the adjustment using the assembly tools GN 355.1 available as accessory, the screw is tightened firmly causing the levelling screw and the spherical washer DIN 6319 underneath to spread and is so secured against twisting in the taphole.
The values for w and x given in the table and for the static load capacity are to be seen as reference values which may differ depending on the prevailing situation. In general, they do not constitute a warranty of condition. The user must determine whether the product is suitable for the intended purpose.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 16.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Lateral Load Resisting Cylinder, Low Friction, MQM Series
SMC
An air cylinder suitable for all driving ranges, from low pressure, low speed, uniform speed and low friction to high pressure, high speed and high-speed response (high frequency).
[Features]
· Covers a range of driving speeds and output controls not possible with standard cylinders thanks to its metal seal structure with minimal sliding resistance.
· Minimal sliding resistance allows low-pressure actuation at 0.005 MPa.
· Low- and uniform-speed actuation. Smooth, uniform-speed actuation ranges as low as 0.3 mm/s.
· Low sliding resistance allows output control in approx. 0.05 N increments. (Based on cylinder piston area × pressure accuracy)
· No increased sliding resistance after not operating for a long period of time.
· Long lifespan: Long service life of 10,000 km or 100 million full cycles.
· Lateral load resistance increased by built-in ball bushing.- 3D CAD data available
Configure nowStarting from∗ ： 366.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Threaded Lifting Pins, self-locking
HALDER
Heavy-duty lifting element for quick and easy use, with moveable shackle and locking stud to provide protection against unintentional unlocking. For lifting loads, the threaded lifting pin is inserted into a threaded hole. In contrast to a ringbolt, time-consuming screwing in and out is therefore unnecessary.
All versions are corrosion-protected. The version made from stainless steel is also resistant to corrosion and weathering, so it is also suitable for external use. In addition, the high-strength, precipitation-hardened pin makes extreme loads possible.
[Operation]
The threaded elements are unlocked by pressing the button.- 3D CAD data available
Configure nowStarting from∗ ： 181.45 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
- Promotional pricing
Set collars / aluminium / quick release / GN 704
GANTER
The force lock with the shaft is made in the GN 704 quick release set collars via an eccentric lever which allows the collars to be adjusted easily and quickly without tools. The aluminium design delivers low inertia values.
The specified tightening torque of the screw is a recommended value with which the collar clamped to a shaft (with closed eccentric lever) is capable of reaching the specified axial load capacity. The details on axial load capacity are non-binding guidance values and do not constitute a warranty of characteristics.
Keeping the friction surface of the eccentric lever slightly greased will help to prolong the useful service life.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 53.60 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locating pins / round / with flange / resilient, conical flat head / press-fit pin
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 62.01 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Miniature profiled rail guides / wide rail / material selectable / pin bore
MISUMI
MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.- Lead Time Reduction
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Configure now
Min. Shipping Days ： 7 Days -
Picsy / Scrap discharger without power supply / conveyor type
MISUMI
This product uses the vertical motion of the press machine to operate the belt conveyor.
It can be used for conveyance of press products such as ejecting scrap outside the die.
1. No power supply required (Reduced CO2 emissions also contribute to promoting ISO environmental measures.)
2. Reduces belt breakage eliminates product dents, scratches and die damage.
3. Reduces setup work
4. Prevents scrap pull-in
5. Slim design
6. Improves work environments- 3D CAD data available
Configure nowMin. Shipping Days ： 12 Days -
Plain bearing bushes / flange selectable / composite material / with housing
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 13.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locating pins, Centring pins / round / small, chamfered flat head / mounting variant selectable
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 3D CAD data available
Configure nowMin. Shipping Days ： 6 Days -
- Promotional pricing
Set collars / stainless steel, steel / slotted / counterbore
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 7.21 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
STEP EJECTOR SLEEVES -DIN ISO 8405 / 1.2344 equivalent+Nitrided / ◎0.08 / Dimensions configurable-
MISUMI
- DIN Standard
- New Product
- 3D CAD data available
Configure nowMin. Shipping Days ： 15 Days -
- Promotional pricing
Lubrication-Free Bushing Block Type Housing Unit, Tall / Compact Type
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 29.97 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Profile rail guideways / carriage dimensions selectable / dust protection
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Profile rail guideways, profile rails, carriage / carriage dimensions selectable
MISUMI
- Volume Discount
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Configure now
Min. Shipping Days ： 10 Days -
- Promotional pricing
Support pins / round / chamfered flat head / press-fit spigot / DIN 6321
GANTER
Headed dowels GN 6321.1can also be used as feet.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 5.28 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 10 Days -
- Promotional pricing
Linear ball bearings / flange selectable / steel / lubricating
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.35 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Corner hinges, plug-in / weldable / brass Spacer rings / steel / GN 128 / GANTER
GANTER
Hinges GN 128 are produced from drawn weldable profiled steel extrusions.
Types ST, STS and MS feature a hinge pin fixed in the lower half of hinge. Type STL with loose steel pin allows the easy installation when attaching several hinges in parallel or if the door is very heavy.
The upper half of Type STS hinge has an additional lubricating nipple DIN 71412-D which allows the hinges to be lubricated without dismantling the hinges.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 2.60 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
JAPAN AVIATION ELECTRONICS(JAE)
The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.
[Features]
[High-density implementation achieved with a large number of pins]
· These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.
[Mechanical lock structure ensures secure fitting]
· The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.
[Double locking structure reliably prevents loss of contact]
· Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.
· The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.
[Low insertion force structure with easy insertion and extraction]
· A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.
[Tin and gold plating are available for the contact finish]
· The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.
[Misconfiguration-prevention types also available]
· Pin headers (70-pin and 135-pin versions) and socket housings come in standard types as well as types with different mating part conformations in order to prevent incorrect configuration. Use of these types prevents incorrect fitting when two different pin headers with pins in the same positions are used next to each other.
· Crimping enables easy connection.- Volume Discount
Configure nowStarting from∗ ： 3.91 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flag hinges / conical countersunk / demountable / POM beech / extruded aluminium / MISUMI
MISUMI
[Features] A universal aluminium sliding hinge. [Material] Main body EN AW-6063 Equiv.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.84 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Corner hinges, plug-in / conical countersinks / stainless steel / barrel polished / B-1066 / TAKIGEN
TAKIGEN
For both left hand and right hand use.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel Lift-Off Hinge SHHPSL/SHHPSLC/SHHPSR/SHHPSRC
MISUMI
[Features] A universal stainless steel (EN 1.4301 Equiv. (sintered)) lift-off hinge.- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 6.48 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
Loading...
Filter
Stock
-
- Show only stock items
Filter search by category
-
- Locating Pins / Positioning Pins / Centring Pins (127)
- Detachable Hinges (106)
- Board Heaters / Heat Sinks (45)
- Linear Bushings / Linear Ball Bearings / Linear Ball Bushings (44)
- Set Collars / Clamping Rings (43)
- Linear Rail Guides / Profile Rail Guides (42)
- Oil Free Bushings / Plain Bushings (38)
- Other Cylinders (33)
- Single Hooks (22)
- Ball Lock Pins, Threaded Lock Pins (16)
- Shoulder Bolts / Reamer Bolts (11)
- Data Measurement Equipment (10)
- Ball Bearings (9)
- Distance Elements / Spacers (Hexagonal / Square / Cylindrical) (9)
- Pneumatic Slide Cylinders (9)
- AEX Corner Gussets (8)
- Handles / Bow handles / Cup handles / Trough handles / Carrying handles (8)
- Vertical Hold-Down Toggle Clamps (7)
- Large Curtains / Hanger Rails (7)
- Flat Head Screws (7)
- Digital Position Indicators (6)
- Stop Pins / Stopper Bolts (6)
- Thread Inserts (6)
- Relays (5)
- Universal Joints (5)
- Rack Gears / Toothed Racks (5)
- Pipe Stand-off Clamps (5)
- Square Connectors (4)
- General Purpose Panels (4)
- Ejector sleeves, cylindrical (4)
- Baffle Boards (4)
- Cable Carriers (4)
- Angle Plates / Angle Brackets (4)
- General Purpose Cylinders (4)
- Valves for various applications (4)
- Tap Holders (4)
- Stack Lights (3)
- Controllers (3)
- Control Boxes (with Hole Drilling Alternations) (3)
- Cavity Inserts for Gas Release (3)
- Cantilever Shafts / Fulcrum Axle Bolts (3)
- Magnetic Transmission (3)
- Fixed Type (3)
- Trims (3)
- Adjustable Feet (3)
- Rectangular Shims (3)
- Tubes (3)
- Lifting Eyebolts (3)
- Drills for Concrete (3)
- Wheels with Shafts (3)
- Hexalobular Wrenches (3)
- Emergency Stop Switches / Safety Switches (2)
- Heat shrinkable tubing (2)
- Exterior Parts (2)
- General Purpose Panels (with Hole Drilling Alternations) (2)
- Ejector sleeves, 1-fold stepped (2)
- Side Mounting Type (2)
- Microscopes, tool ranges (2)
- Toothed Belts / Timing Belts (2)
- Rollers / Carrying Rollers (2)
- Levelling Feet (2)
- Pipe Frames (2)
- Cylinders with Guides (2)
- Rotary Actuators (2)
- Clamp Cylinders (2)
- Pressure Sensors, Flow Rate Sensors (2)
- Corner C (Customized Straight Blades) (2)
- Tooling (2)
- Clamping Parts (for Manual Tightening) (2)
- Hex Wrenches (2)
- Nippers (Pneumatic Tools) (2)
- Lifters / Hand Pallets (2)
- Selector Switches (1)
- Board-To-Board Connectors (1)
- Caps (1)
- Crimp Terminals (Options, Others) (1)
- Sheet-Type Tubes (1)
- General Purpose Tubes (1)
- Ducts (1)
- Screws/Spacers (1)
- Boards/Cabinets/Boxes (1)
- Aluminum/Plastic Boxes (with Hole Drilling Alternations) (1)
- Self-Standing Board Boxes (with Hole Drilling Alternations) (1)
- Board Handles (1)
- Fans (Options, Others) (1)
- Switching Power Supplies (1)
- Electrodes (1)
- Single Axis Actuators (1)
- Indexing Plungers (1)
- Spring Plungers (1)
- Guide Elements (1)
- Workpiece clamps (horizontal clamping direction) (1)
- Rods, Rod Stands (1)
- Spur Gears (1)
- Belt Conveyors, Plastic Chain Conveyors (1)
- Adjustable (1)
- Clamping Levers (1)
- Compact Cylinders (1)
- Hands, Grippers (1)
- Welding Flanges (1)
- Sanitary Pipes (1)
- Sight Glasses (1)
- Floor Through Metal Fittings (1)
- Hex Bolts (1)
- Lock Nuts (1)
- Scrap Discharge Equipment (1)
- Button Dies Extracting Tools (1)
- Long Neck Square End Mills (Carbide) (1)
- Square (Customized Straight Blades) (1)
- Taper Balls (Customized Straight Blades) (1)
- Taper Radius (Customized Straight Blades) (1)
- Taper Corner C (Customized Straight Blades) (1)
- Replaceable Blade Type Chamfering Tools/Tips/Blades (1)
- Surface Roughness Testers (1)
- Electric Discharge Jigs (1)
- Wrenches / Offset Wrenches / Ratchet Wrenches (1)
- Balance and Balance-Related Items (1)
Filter search by shipping / manufacturer / CAD data type
-
Shipping Days
- All
- Same day
- 1 Day or Less
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
-
Brands
- MISUMI (402)
- TAKIGEN (59)
- SMC (48)
- GANTER (27)
- HALDER (26)
- NORELEM (22)
- TRUSCO NAKAYAMA (21)
- KIPP (19)
- SIEMENS (15)
- MITUTOYO (14)
- FISCHER ELEKTRONIK (12)
- OMRON (11)
- RITTAL (9)
- ELESA (7)
- MIZUMOTO MACHINE MFG (7)
- SBC (6)
- TAKACHI ELECTRONICS ENCLOSURE (6)
- AMF (5)
- ACE STOSSDAEMPFER (4)
- ESCO (4)
- EATON (4)
- FESTO (4)
- HIROSE ELECTRONIC (4)
- IGUS (4)
- SKF (4)
- WIHA (4)
- DESTACO (3)
- ICHIGUCHI (3)
- KATO MFG (3)
- LSI Cooler (3)
- HINAKA (3)
- NITTOUVALV (3)
- AKAGI (2)
- IFM ELECTRONIC (2)
- MIYOSHI KIKAI (2)
- PATLITE (2)
- VESSEL (2)
- WEIDMUELLER (2)
- A&D (1)
- GEDORE (1)
- BOPLA (1)
- CKD (1)
- CHIYODA TSUSHO (1)
- BIG KAISER (1)
- FEC (1)
- HAZET (1)
- HILOGIK (1)
- JAPAN AVIATION ELECTRONICS(JAE) (1)
- KONISHI MFG (1)
- KS SANGYO (1)
- MAHR (1)
- NICHIFU TERMINAL INDUSTRIES (1)
- NACHI(FUJIKOSHI) (1)
- NOGAJAPAN (1)
- NSK (1)
- NTN (1)
- ORIENTAL MOTOR (1)
- RECOIL (1)
- SEIWA ELECTRIC (1)
- SCHNEIDER ELECTRIC (1)
- SANKO TECHNO (1)
- SURUGA SEIKI (1)
- SUPER TOOL (1)
- SHOWA CORPORATION (1)
- THK (1)
- MAEDAKINNZOKU (1)
- TOK BEARING (1)
- UNIKA (1)
- YUTAKA MAKE (1)
-
CAD
- 2D
- 3D
Categories
-
Linear Shafts
-
Shaft Supports
-
Locating Pins
-
Bushings for Fixtures
-
Hinge Pins
-
Hinge Bases, Hinge Plates, Hinge Bolt
-
Stripper Bolts / Reamer Bolts / Shoulder Bolts
-
Space Saving Bolts
-
Threaded Stopper Blocks / Brackets for Stopper Screws
-
Pushers
-
Axles / Rotary Shafts
-
Bearings with Housings
-
Timing Pulleys, Idlers
-
Flat Belt Pulleys, Idlers
-
Distance elements (hexagonal, square, cylindrical)
-
Urethane, Rubber, Sponge, Felt - Round Shape
-
Non-Metal Washers, Collars
-
Shim Rings
Loading...
Brands
Loading...
Technical Information
Loading...
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.