Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model (Part Numbers)

Click on this image to zoom in.

Volume Discount

MISUMI

Significantly reduces the roughing time of aluminum

Non-Coated
Aluminum
3 Flutes
R (Regular)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
Part Numbers
Specification and price
Features and examples

Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model:Related Image

Data to be displayed: 30; 45; 60

Part Number
SEC-ALRFR5
SEC-ALRFR6
SEC-ALRFR8
SEC-ALRFR10
SEC-ALRFR12
SEC-ALRFR16
SEC-ALRFR20
SN-SEC-ALRFR6-[20-39/1]-15
SN-SEC-ALRFR8-[25-48/1]-20
SN-SEC-ALRFR10-[30-42/1]-25
SN-SEC-ALRFR12-[35-70/1]-30
SN-SEC-ALRFR16-[50-68/1]-40
SN-SEC-ALRFR20-[55-62/1]-45

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Additional Classification	Tolerance of OD (mm)	Figure	● Inventory Product □ Manufacturer Product
48.89 €	1	Available	5 Days	5	15	6	57	-	Stocked Product	0 ~ -0.048	1	●
44.16 €	1	Available	5 Days	6	15	6	57	-	Stocked Product	0 ~ -0.058	2	●
57.85 €	1	Available	5 Days	8	20	8	72	-	Stocked Product	0 ~ -0.058	2	●
88.08 €	1	Available	5 Days	10	25	10	72	-	Stocked Product	0 ~ -0.070	2	●
112.84 €	1	Available	5 Days	12	30	12	100	-	Stocked Product	0 ~ -0.070	2	●
190.53 €	1	Available	5 Days	16	40	16	100	-	Stocked Product	0 ~ -0.070	2	●
166.82 €	1	Available	5 Days	20	45	20	100	-	Stocked Product	0 ~ -0.084	2	●
-	1		8 Days	6	15	6	57	20 ～ 39	Standard Neck Relief	0 ~ -0.058	2	□
-	1		8 Days	8	20	8	72	25 ～ 48	Standard Neck Relief	0 ~ -0.058	2	□
-	1		8 Days	10	25	10	72	30 ～ 42	Standard Neck Relief	0 ~ -0.070	2	□
-	1		8 Days	12	30	12	100	35 ～ 70	Standard Neck Relief	0 ~ -0.070	2	□
-	1		8 Days	16	40	16	100	50 ～ 68	Standard Neck Relief	0 ~ -0.070	2	□
-	1		8 Days	20	45	20	100	55 ～ 62	Standard Neck Relief	0 ~ -0.084	2	□

Specifications

Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model:Related Image

Model Number		Flute Length ℓ	Overall Length L	Shank Diameter d	Figure
	Outer Diameter D
	Outer Diameter D
SEC-ALRFR	5	15	57	6	1
	6	15	57	6	2
	8	20	72	8	2
	10	25	72	10	2
	12	30	100	12	2
	16	40	100	16	2
	20	45	100	20	2

For Cutting Conditions, Refer to >>Click here.

More Information

● The wide pitch and shallow nicks allow the time taken for the rough machining of aluminum to be reduced.
● It has a 3-flute structure for wider chip pockets which discharges chips better, allowing for high-efficiency aluminum machining.

Basic information

Work Material	Aluminum Alloy / Copper Alloy	Number of Flutes(sheet)	3	Model	Roughing
Coating	Non-Coated	Processing Applications	Flat Surface / Side Surface / Groove / Inclined Cutting	Geometry	Ultra-Small R
Torsion Angle (θ)	Standard Helix (30 to 40°)