Carbide T-Slot Cutter 2 / 4-flute / Radius (Part Numbers)
Click on this image to zoom in.
Click on this image to zoom in.
-Corner radius shape effective for crack prevention when machining dovetail grooves
.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Shank Diameter d (mm) | Number of Flutes | Overall Length L (mm) | #2 | #3 | #4 | #5 | #6 | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 4 | 2 Flutes | 50 | 3 ～ 4 | 1 ～ 2 | 2 | 1.5 | 0.1 ～ 0.9 | ||
| 1 | 7 Days | 6 | 2 Flutes | 60 | 5 ～ 6 | 1 ～ 5 | 2 ～ 6 | 3 ～ 4 | 0.1 ～ 2.4 | ||
| 1 | 7 Days | 8 | 2 Flutes | 60 | 6.1 ～ 8 | 1 ～ 5 | 2 ～ 8 | 4 ～ 6 | 0.1 ～ 2.4 | ||
| 1 | 7 Days | 10 | 2 Flutes | 80 | 8.1 ～ 10 | 1 ～ 5 | 2 ～ 10 | 5 ～ 7 | 0.1 ～ 2.4 | ||
| 1 | 7 Days | 12 | 2 Flutes | 80 | 10.1 ～ 12 | 1 ～ 5 | 2 ～ 12 | 6 ～ 8 | 0.1 ～ 2.4 | ||
| 1 | 7 Days | 16 | 2 Flutes | 100 | 12.1 ～ 16 | 1 ～ 5 | 2 ～ 16 | 8 ～ 12 | 0.1 ～ 2.4 | ||
| 1 | 7 Days | 4 | 4 Flutes | 50 | 3 ～ 4 | 1 ～ 2 | 2 | 1.5 | 0.1 ～ 0.9 | ||
| 1 | 7 Days | 6 | 4 Flutes | 60 | 5 ～ 6 | 1 ～ 5 | 2 ～ 6 | 3 ～ 4 | 0.1 ～ 2.4 | ||
| 1 | 7 Days | 8 | 4 Flutes | 60 | 6.1 ～ 8 | 1 ～ 5 | 2 ～ 8 | 4 ～ 6 | 0.1 ～ 2.4 | ||
| 1 | 7 Days | 10 | 4 Flutes | 80 | 8.1 ～ 10 | 1 ～ 5 | 2 ～ 10 | 5 ～ 7 | 0.1 ～ 2.4 | ||
| 1 | 7 Days | 12 | 4 Flutes | 80 | 10.1 ～ 12 | 1 ～ 5 | 2 ～ 12 | 6 ～ 8 | 0.1 ～ 2.4 | ||
| 1 | 7 Days | 16 | 4 Flutes | 100 | 12.1 ～ 16 | 1 ～ 5 | 2 ～ 16 | 8 ～ 12 | 0.1 ～ 2.4 |
Loading...
Specification Table
| Model Number | Blade Diameter D 0.1 mm Unit Specification | Blade Width ℓ 0.1 mm Unit Specification | Neck Length ℓ1 1 mm Unit Specification | Neck Diameter* d1 0.1 mm Unit Specification | Corner R 0.05 mm Unit Specification | Overall Length L | |
| Shank diameter d | |||||||
| STSREM (2-flute) STSREMW (4-flute) | 4 | 3.0 to 4.0 | 1.0 to 2.0 | 2 | 1.5 | 0.10 ≤ R ≤ (ℓ-0.2)/2 | 50 |
| 6 | 5.0 to 6.0 | 1.0 to 5.0 | 2 to 6 | 3.0 to 4.0 | 60 | ||
| 8 | 6.1 to 8.0 | 1.0 to 5.0 | 2 to 8 | 4.0 to 6.0 | 60 | ||
| 10 | 8.1 to 10.0 | 1.0 to 5.0 | 2 to 10 | 5.0 to 7.0 | 80 | ||
| 12 | 10.1 to 12.0 | 1.0 to 5.0 | 2 to 12 | 6.0 to 8.0 | 80 | ||
| 16 | 12.1 to 16.0 | 1.0 to 5.0 | 2 to 16 | 8.0 to 12.0 | 100 |
*Note that if the neck diameter does not satisfy the condition "2 ≤ D −d1", products are not available.
Click here for the cutting conditions
Basic information
| Material | Ultrafine Particulate Carbide |
|---|
Configure
Basic Attributes
-
Shank Diameter d(mm)
- 4
- 6
- 8
- 10
- 12
- 16
-
Number of Flutes
- 2 Flutes
- 4 Flutes
-
Overall Length L(mm)
-
#2
-
#3
-
#4
-
#5
-
#6
-
Type
- STSREM
- STSREMW
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.