Automatic Drain (Part Numbers)
Condensates collected by filtration or separation equipment throughout the network should be removed often to avoid contaminating the entire system or damage to pneumatic tools.
Drains are an effective solution to remove condensates and contaminates.
The proper drain choice is dependent on the overall size of the system, the location to be equipped and the accessibility of the air line.
Drains are an effective solution to remove condensates and contaminates.
The proper drain choice is dependent on the overall size of the system, the location to be equipped and the accessibility of the air line.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PDE 100
- Product data
- CAD data not available
Basic information
| Temperature(°C) | +1 to +60 | Description | Repair kit for PDE 100 automatic drain | ID Passage | 4.5 |
|---|---|---|---|---|---|
| Drain opening | 0.5 - 10 sec | Drain cycle | 0.5 - 45 min | Operating pressure(bar) | 0 to 16 bar |
| Outlet ⌀(mm) | 8 | Inlet BSPT male thread | R 1/2 | Protection rating | IP 65 |
| Removal capacity(l/h) | 5 | Supply voltage | 230 V AC |
This page is Automatic Drain, part number PDE 100.
You can find the detail information about specifications and dimensions on part number PDE 100.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.