Chuck Mate (Part Numbers)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| P-6-14 |
| P-6-17 |
| P-8-17 |
| P-8-19 |
| P-8-20 |
| P-10-19 |
| P-10-20 |
| P-12N-25 |
| S7-17 |
| S9-19 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Compatible Chuck Nominal Size | Chuck Outer Diameter (mm) | Details Type | Compatible Chuck Outer Diameter (in.) | Pin Diameter (mm) | Outer Diameter (mm) | Maximum Machining Dimensions (mm) | Trusco Code | Mass (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
251.57 € | 1 | 6 Days | 6 | 152.4 | P Type (for Power Chuck) | 6 | 13.5 | 170 | 85 | 112-8388 | 1400 | ||
251.57 € | 1 | 6 Days | 6 | 152.4 | P Type (for Power Chuck) | 6 | 16.5 | 170 | 85 | 112-8396 | 1400 | ||
328.70 € | 1 | 6 Days | 8 | 203.2 | P Type (for Power Chuck) | 8 | 16.5 | 220 | 115 | 112-8418 | 2800 | ||
328.70 € | 1 | 6 Days | 8 | 203.2 | P Type (for Power Chuck) | 8 | 18.5 | 220 | 115 | 112-8426 | 2800 | ||
328.70 € | 1 | 6 Days | 8 | 203.2 | P Type (for Power Chuck) | 8 | 19.5 | 220 | 115 | 156-6679 | 2800 | ||
394.24 € | 1 | 6 Days | 10 | 254 | P Type (for Power Chuck) | 10 | 18.5 | 260 | 148 | 112-8451 | 3500 | ||
394.24 € | 1 | 6 Days | 10 | 254 | P Type (for Power Chuck) | 10 | 19.5 | 260 | 148 | 156-6687 | 3500 | ||
540.41 € | 1 | 6 Days | 12 | 304.8 | P Type (for Power Chuck) | 12 | 24.5 | 318 | 186 | 405-5853 | 5300 | ||
341.37 € | 1 | 6 Days | 7 | 177.8 | S type (for scroll chuck) | 7 | 16.5 | 230 | 115 | 103-2356 | 3100 | ||
412.94 € | 1 | 6 Days | 9 | 228.6 | S type (for scroll chuck) | 9 | 18.5 | 270 | 148 | 103-2364 | 3900 |
Loading...
Basic information
| Type | Soft Jaw Molding Jig / Soft Jaw Molding Holder | Features | Soft jaw forming setup is done within 1 minute. Processing also completes in a short time. Even inexperienced people can do centering with single-action. Core runout accuracy is within 10 microns. Caliper measurements can be made without installing permanent tooling. When using, open the chuck, insert 3 stop pins of chuck mate in the mounting hole of soft jaw, and then tighten the chuck. In the case of tension chuck, perform the reverse operation. | Application | For soft jaw molding holder with chucked workpieces. |
|---|
Configure
Basic Attributes
-
Compatible Chuck Nominal Size
-
Chuck Outer Diameter(mm)
-
Details Type
- P Type (for Power Chuck)
- S type (for scroll chuck)
-
Compatible Chuck Outer Diameter (in.)
- 6
- 7
- 8
- 9
- 10
- 12
-
Pin Diameter(mm)
- 13.5
- 16.5
- 18.5
- 19.5
- 24.5
-
Outer Diameter(mm)
- 170
- 220
- 230
- 260
- 270
- 318
-
Maximum Machining Dimensions(mm)
- 85
- 115
- 148
- 186
-
Trusco Code
-
Type
- P
- P-N
- S
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.