V Series Carbide Square End Mill, 4 Flutes (Part Numbers)
- Volume Discount
By using a carbide material, it has both high hardness and high elasticity, reducing wear on the cutting edge during machining.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Basic information
| work material | General Steel / Quenched and tempered steel | Number of flutes(sheet) | 4 | Type | Square |
|---|---|---|---|---|---|
| Coating | TiAlN | Overall Length (L)(mm) | 50 | Torsion Angle (θ) | High Helix (45˚ to 60˚) |
| Torsion Angle Details (θ)(°) | 45 | Blade tip tolerance(mm) | 0~-0.02 | Notes | Be careful as tools may shoot out or fall when removing from the case. Do not touch the cutting blades with bare hands. Never touch a tool that is being used. Check tools for scratches, cracks, etc., and ensure that they are properly placed in the holder. In case of abnormal vibrations while using a tool, immediately stop the machine and fix the problem. Always use in a safe environment by wearing protective gear such as safety goggles. There is a potential risk of fire due to heat or scraps resulting from sparks or damage during cutting work. |
| Supplement | Reduced blade tip wear during machining. |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.