Carbide B&F Drill CBFD (Part Numbers)

Click on this image to zoom in.

[Features]
· In non-ferrous hole drilling, achieves a hole diameter precision and surface precision comparable to conventional reamer machining without the need for pilot holes.
· Effectively reduces machining time by making more use of a limited number of tools in machining, etc.
· Tip angle: 120°

(i)Remark

Select lower cutting speeds and feed speeds for small diameter sizes. Use step feeding to discharge chips with deep hole drilling (exceeding 5D.) Use water-insoluble cutting oil in order to increase the finishing surface roughness. When machining by rotating the workpiece, carry out concentric machining with the main shaft that is chucking the workpiece. In the case of coring, etc., limit pilot hole misalignment to a maximum of 0.5 mm. With thin workpieces, the hole may shrink after machining and the hole diameter may take on a minus value.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
CBFD6012
CBFD6020
CBFD6033
CBFD6039
CBFD6079
CBFD6085

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Hole diameter (drill diameter) D (mm)	Overall Length L (mm)	Blade diameter tolerance	Flute length (mm)
89.42 €	1	8 Days	1.2	45	0 to 0.003	20
68.69 €	1	8 Days	2	50	0 to 0.003	25
94.60 €	1	8 Days	3.3	60	0 to 0.003	30
103.94 €	1	8 Days	3.9	70	0 to 0.003	35
161.17 €	1	8 Days	7.9	90	0 to 0.005	50
166.36 €	1	8 Days	8.5	90	0 to 0.005	50

Basic information

work material	Cast Iron / Aluminum / Copper	Tool Material Type	Carbide	Shank Type	Straight Shank
Coating Y/N	N/A	With/without Oil Hole	N/A	Torsion angle(°)	Straight