Holding Tools for I.D. Tuning（Page 5）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Configure nowStarting from∗ ： 317.92 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR / L
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Configure nowStarting from∗ ： 841.09 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn SL Shank Adapter 570-NG
SANDVIK
[Features]
An interchangeable-head-type turning bit.
Has fewer tool points making inventory management easy and allowing the selection of multiple types of cutting unit.
For outer diameter turning of all types of work material.Configure nowStarting from∗ ： 233.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Turning CXS-..T090
SANDVIK
[Features]
CoroTurn XS Insert Bar
Solid-carbide coating
Boring bit for small-diameter machining
For turningConfigure nowStarting from∗ ： 53.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 56.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 58.03 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Profiling CXS-..TE98 Profiling
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For profilingConfigure nowStarting from∗ ： 59.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 74.48 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Grooving CXS-..G
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For grooving
Groove width: 1.5 mmConfigure nowStarting from∗ ： 59.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Profiling CXS-..R
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For grooving
Full R
R: 2.0 mmConfigure nowStarting from∗ ： 69.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Face Grooving CXS-..F
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For face grooving
Groove width: 1.0 mmConfigure nowStarting from∗ ： 76.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Inner Diameter Chamfering CXS-..GX
SANDVIK
For inner diameter precision machining of small accessories The positioning pin allows precise positioning of carbide boring tool bits in the adapterConfigure nowStarting from∗ ： 64.92 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-STFCL
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner-diameter turning.
The low cutting resistance ensures stable machining operations.
For inner-diameter turning (bore cutting) operations.Configure nowStarting from∗ ： 437.82 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-SVUCR/L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner-diameter turning.
The low cutting resistance ensures stable machining operations.
For inner-diameter turning (bore cutting) operations.Configure nowStarting from∗ ： 401.49 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 310.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 590.40 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 441.44 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
T-Max S Boring Tool Bit For Turning S..CTFPR / L
SANDVIK
A boring tool bit for turning that achieves high productivity, high quality, and high efficiencyConfigure nowStarting from∗ ： 199.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 964.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 550.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 647.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 647.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 550.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 647.31 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 355.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 191.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 191.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 183.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 546.81 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 566.17 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 568.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 568.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn HP SL Cutting Head TR-SL-V13LBR / L-HP
SANDVIK
CoroTurnSL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of itemsConfigure nowStarting from∗ ： 566.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 247.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,055.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,055.76 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn SL 570-R / L / N
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of itemsConfigure nowStarting from∗ ： 634.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 572.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Applicable Tip Shape |
| Minimum Machining Diameter |
| Application |
| Cutting Direction |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank diameter |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | CoroTurn XS Insert Bar For Turning With Chip Breaker CXS-..T098 | CoroTurn XS Insert Bar For Inner Diameter Chamfering CXS-..GX | CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-SVUCR/L | Cartridge T-Max P Lever Clamp For Negative Inserts PCLNR / L | Cartridge T-Max P Lever Clamp For Negative Inserts PTFNR / L | Cartridge T-Max P Lever Clamp For Negative Inserts PTGNR / L | Cartridge T-Max P Lever Clamp For Negative Inserts PTSNR / L | Cartridge T-Max P Lever Clamp For Negative Inserts PTTNR / L | Cartridge - Round Shank Boring Tool Bit For Positive Inserts, R / L140 | Cartridge Round Shank Boring Tool Bit For Positive Inserts R / L141 | Cartridge Round Shank Boring Tool Bit For Positive Inserts R / L142 | ||||||||||||||||||||||||||||||||||
| Starting from∗ | 317.92 € *Unit price with basic configuration | 841.09 € *Unit price with basic configuration | 233.14 € *Unit price with basic configuration | 53.87 € *Unit price with basic configuration | 56.57 € *Unit price with basic configuration | 58.03 € *Unit price with basic configuration | 59.21 € *Unit price with basic configuration | 74.48 € *Unit price with basic configuration | 59.94 € *Unit price with basic configuration | 69.36 € *Unit price with basic configuration | 76.70 € *Unit price with basic configuration | 64.92 € *Unit price with basic configuration | 437.82 € *Unit price with basic configuration | 401.49 € *Unit price with basic configuration | 310.65 € *Unit price with basic configuration | 590.40 € *Unit price with basic configuration | 441.44 € *Unit price with basic configuration | 199.20 € *Unit price with basic configuration | 964.75 € *Unit price with basic configuration | 550.43 € *Unit price with basic configuration | 647.31 € *Unit price with basic configuration | 647.31 € *Unit price with basic configuration | 550.43 € *Unit price with basic configuration | 647.31 € *Unit price with basic configuration | 355.47 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 191.98 € *Unit price with basic configuration | 191.98 € *Unit price with basic configuration | 183.72 € *Unit price with basic configuration | 546.81 € *Unit price with basic configuration | 566.17 € *Unit price with basic configuration | 568.60 € *Unit price with basic configuration | 568.60 € *Unit price with basic configuration | 566.17 € *Unit price with basic configuration | 247.67 € *Unit price with basic configuration | 1,055.76 € *Unit price with basic configuration | 1,055.76 € *Unit price with basic configuration | 634.01 € *Unit price with basic configuration | 572.23 € *Unit price with basic configuration |
| Min. Shipping Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days |
| Applicable Tip Shape | T (Triangle) | T (Triangle) | - | - | - | - | - | - | - | - | - | - | T (Triangle) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | T (Triangle) | W (Hexagonal Type) | S (Rectangular) | S (Rectangular) | S (Rectangular) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | D (55° Diamond-Shape) | T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | - | - | - | - | - |
| Minimum Machining Diameter | 8.5 ～ 20 | 13 ～ 16 | - | 5.2 | 5.2 ～ 7.2 | 5.2 ～ 7.2 | 4.2 ～ 6.2 | 1.95 ～ 7.2 | 4.2 ～ 7.2 | 4.2 ～ 7.2 | 6.2 | 5.2 | 40 ～ 50 | 32 ～ 37 | 150 | - | - | 20 ～ 32 | - | 25 ～ 63 | 32 ～ 63 | 32 ～ 63 | 28 ～ 32 | 32 | - | 60 ～ 70 | 50 ～ 70 | 55 ～ 100 | 50 ～ 70 | 50/75 ～ 70/90 | 50 ～ 55 | 50/75 | 8 ～ 20 | 8 ～ 20 | 8 ～ 20 | 38 ～ 56 | 40 ～ 50 | 40 ～ 50 | 45 ～ 50 | 40 ～ 50 | - | - | - | - | - |
| Application | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter |
| Cutting Direction | Right-hand / Left-hand | Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | - | Right-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand |
| Clamp Shape | Screw-on | Screw-on | - | - | - | - | - | - | - | - | - | - | Screw-on | Screw-on | - | Clamp-on | Clamp-on | Clamp-on | Pin Lock | Lever lock | Lever lock | Lever lock | Lever lock | Lever lock | - | Lever lock | Lever lock | Lever lock | Lever lock | Lever lock | Lever lock | Lever lock | Screw-on | Screw-on | Screw-on | Lever lock | Lever lock | Screw-on | Screw-on | Screw-on | - | - | - | - | - |
| Overall Length L1 | 100 ～ 200 | 150 ～ 180 | 103 ～ 152 | 32.25 ～ 42.25 | 37.25 ～ 62.25 | 32.25 ～ 62.25 | 37.26 ～ 52.25 | 52.25 | 27.3 ～ 57.8 | 32.3 ～ 52.7 | 37.3 | 3 ～ 37.3 | - | 15 ～ 20 | - | 200 ～ 300 | 400 | 200 ～ 300 | 44.3 ～ 45.3 | 200 ～ 350 | 300 ～ 350 | 300 ～ 350 | 200 ～ 300 | 300 | - | 63 ～ 70 | 55.3 ～ 70.3 | 63 ～ 100 | 55 ～ 70 | 55 ～ 70 | 57.2 ～ 63.2 | 55 | 30 ～ 128 | 30 ～ 128 | 30 ～ 128 | 32 ～ 36 | 35 | 38 | 22 ～ 27 | 38 ～ 40 | 134 ～ 135.65 | - | - | - | - |
| Clearance angle | 7° | 7° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 11° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank diameter | 6 ～ 16 | 10 ～ 12 | 25 ～ 40 | 5 | 5 ～ 7 | 5 ～ 7 | 4 ～ 6 | 5 ～ 7 | 4 ～ 7 | 4 ～ 7 | 6 | 5 | 32 ～ 40 | 20 ～ 25 | - | - | 40 | 16 ～ 25 | 22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 ～ 40 | 32 ～ 40 | 32 ～ 40 | 32 ～ 40 | 32 ～ 40 | 32 ～ 40 | - | - | - | - |
| Protrusion length (L/D) | 36 ～ 64 | 100 ～ 120 | - | - | - | - | - | - | - | - | - | - | 32 | 20 | - | 80 ～ 100 | 80/160 | 32.5～64 ～ 49～100 | - | 34 ～ 45 | 36 ～ 40 | 34 ～ 40 | 30 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lubrication Hole Y/N | Available | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | Available | - | - | - | N/A | N/A | Available | Available | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Applicable Tip Shape
-
Minimum Machining Diameter
- 0.3
- 0.5
- 0.6
- 0.6 1.0 2.0 2.8 3.0 4.0 5.0
- 0.9
- 1
- 1.5
- 1.95
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 5
- 5.2
- 5.5
- 6
- 6.0 6.6 8.0
- 6.0 6.6 8.0 8.8 11.0
- 6.0 6.8 7.0
- 6.2
- 6.5
- 6.604
- 7
- 7.2
- 7.5
- 8
- 8.2042
- 8.5
- 8.6868
- 9
- 10
- 10.2108
- 10.4902
- 11
- 12
- 12.192
- 12.5
- 12.7
- 13
- 14
- 15
- 15.1892
- 16
- 16.3068
- 17
- 17.2974
- 18
- 18.4912
- 18.9992
- 19
- 19.6088
- 19.9898
- 20
- 20/30
- 20.1
- 20.5
- 20.62
- 21
- 21.59
- 22
- 23
- 23.5966
- 24.892
- 24.9
- 24.99
- 24.9936
- 24.994
- 25
- ø25
- 25/37
- 25.4
- 25.7048
- 26
- 26.01
- 26.6954
- 27
- 28
- 30
- 30.505
- 30.5054
- 31
- 31.496
- 31.5
- 31.801
- 32
- ø32
- 32.004
- 32.5
- 32.512
- 32.9946
- 32.995
- 33
- 34
- 35
- 35.45
- 36.45
- 37
- 37.287
- 37.2872
- 37.313
- 37.45
- 38
- 38.1
- 38.45
- 38.913
- 39
- 39.45
- 40
- 40/55
- 40.005
- 40.01
- 40.1
- 40.1066
- 40.132
- 40.45
- 41
- 41.45
- 41.5
- 42.0
- 42.45
- 43.307
- 43.45
- 44
- ø44
- 44.45
- 44.704
- 45
- 45.0088
- 45.45
- 46
- 46.45
- 46.99
- 47
- 47.45
- 48
- 48.45
- 49
- 49.3014
- 49.45
- 50
- 50/75
- 50.01
- 50.0126
- 50.038
- 50.45
- 50.8
- 51
- 51.45
- 52
- 52.45
- 53
- 53.45
- 54.0004
- 54.45
- 54.99
- 55
- 55.35
- 56
- 56.35
- 57
- 57.35
- 58
- 58.35
- 59.35
- 59.99
- 60
- 60/75
- 60.35
- 61.01
- 61.011
- 61.35
- 62
- ø62
- 62.35
- 62.992
- 63
- 63.35
- 63.5
- 63.98
- 64
- 64.35
- 64.7954
- 65
- 65.35
- 66.35
- 67.35
- 67.894
- 68
- 68.35
- 69
- 69.35
- 70
- 70/90
- 70.35
- 71.35
- 72
- 72.35
- 73.35
- 74.35
- 75
- 75.01
- 75.35
- 76.35
- 77.013
- 77.35
- 78.35
- 79
- 79.35
- 80
- 80.01
- 80.35
- 81.35
- 82.35
- 82.499
- 83
- 83.35
- 84.35
- 85
- 85.35
- 86
- 86.35
- 87.35
- 88
- ø88
- 88.35
- 89
- 89.35
- 90
- 90.35
- 98
- 99
- 99.9998
- 100
- 101
- 105
- 106
- 109
- 111.35
- 115
- 119.9896
- 120
- 123
- ø125
- 130
- 132.35
- 135
- 136
- 139.7
- 140
- 145
- 148
- 150
- 153.35
- 166
- 170
- 172.72
- 175
- 188
- 198
- 212
- 220
- 223.52
- 228
- 248
- 250
- 258
- 275
- 279.4
- 298
- 378
- 458
- 538
- 778
- 1018
-
Application
-
Cutting Direction
-
Clamp Shape
-
Overall Length L1
-
Clearance angle
-
Shank diameter
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Brand
CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for I.D. Tuning
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.