Holding Tools for I.D. Tuning

402

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 12 Days or Less 14 Days or Less 23 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

SANDVIK Coromant Capto to Fine Boring Head Adaptor

SANDVIK

[Specifications]
・Type: Fine boring head
・Processing type: Finishing-bore tolerance IT6
・Minimum Machining Diameter: 3mm
・Cutting Direction: Neutral
・eClass-5.1: 21021105

Select to compare

Configure now
Starting from^∗ ：	1,245.23 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroTurn 111 Boring Bar for Back Boring

SANDVIK

[Specifications]
・Type: Boring bar
・Minimum Machining Diameter:21.59mm
・Cutting Direction: Right-hand
・Overall Length L1: 203.2mm
・Clearance angle: 11º
・eClass-5.1: 21010903

[Features]
・Positive insert shape
・Low cutting forces
・Excellent edge strength
・Screw clamping ensures stability and unobstructed chip flow
・Tools with high pressure coolant
・Insert geometries and grades for all materials

Select to compare

Configure now
Starting from^∗ ：	194.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroBore 826 XL Fine Boring Tool

SANDVIK

[Specifications]
・Minimum Machining Diameter: 148, 198, 248mm
・Cutting Direction: Neutral
・Overall Length L1: 90, 136mm
・Cooling lubricant: Yes - through center
・eClass-5.1: 21021105

[Features]
・CoroBore XL is the first choice for large-diameter fine boring.
・The tools can be adjusted radially in order to cover a certain diameter range with one tool.
・The tools allow precision adjustment in microns in order to achieve close hole tolerances
・CoroTurn 107 and CoroTurn 111 inserts with dedicated grades and geometries for all materials
・Excellent surface finish with wiper inserts
・Tool holders optimized for large-diameter boring
・Available with damped Silent Tools adapters for vibration-free boring in diameters 148–315 mm (5.827–12.402 inch), even at long overhangs
・Also available as lightweight tools: CoroBore lightweight boring tools reduce tool weight and tool change moment, enabling easier handling and larger diameters
・826

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Insert Holder For EWN Boring Head Replacement

BIG KAISER

[Features]
Combining the head and insert holder makes it possible to secure a cutting chip pocket.
Designed for improved cutting chip discharge.
For EWN head

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	65.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SCLCR / L-R

SANDVIK

[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.

Select to compare

Configure now
Starting from^∗ ：	362.20 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

CoroTurn HP SL Cutting Head PCLN

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	523.29 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SANDVIK Coromant Capto Reduction Adaptor

SANDVIK

[Specifications]
・Type: Reducing adapter, Reducing element
・Cutting Direction: Neutral
・Coolant: Yes-radial KSS, Yes-through center
・eClass-5.1: 21021105

[Features]
・Three systems in one
・High torque transmission
・High bending strength
・Quick change and automated tool change
・Advanced nozzle technology for process security even at low pressures
・Through-tool delivery of high-pressure coolant, from machine to cutting edge
・Balanced and concentric
・Self-centering

Select to compare

Configure now
Starting from^∗ ：	473.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroBore 825 Fine Boring Head

SANDVIK

[Specifications]
・Type: Fine boring head
・Processing type: Finishing-bore tolerance IT6
・Minimum Machining Diameter: 150mm
・eClass-5.1: 21021105

Select to compare

Configure now
Starting from^∗ ：	1,645.69 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK Coromant Capto Extension Adaptor

SANDVIK

[Specifications]
・Type: Extending element, Reducing element
・Cutting Direction: Neutral
・Coolant: Yes - through center
・eClass-5.1: 21021105

[Features]
・High torque transmission
・High bending strength
・Quick change and automated tool change
・Advanced nozzle technology for process security even at low pressures
・Through-tool delivery of high-pressure coolant, from machine to cutting edge
・Balanced and concentric
・Self-centering

Select to compare

Configure now
Starting from^∗ ：	469.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

A / S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

KYOCERA

[Features] Machining applications: Inside diameter, through hole; compatible insert shape: C (80° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw on (S).

Select to compare

Configure now
Starting from^∗ ：	110.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroTurn XS Insert Bar for Turning CXS-..T098

SANDVIK

[Features]
CoroTurn XS, Insert Bar
Coating Carbide
Boring Bar for Small Diameter Machining
For lathe turning

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.55 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroTurn SL Coromant Capto Dampened Boring Tool Bit, C-570-3C

SANDVIK

[Features]
An interchangeable-head-type boring bit.
Includes a dampening function, ensuring minimal chatter even with long protrusions.
Has fewer tool points making inventory management easy and allowing the selection of multiple types of cutting unit.
For inner-diameter turning of all types of work material.

Select to compare

Configure now
Starting from^∗ ：	1,530.38 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

A-SVPC (B)-AE Type Excellent Bar (Undercutting and Profiling)

KYOCERA

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: V (35° with two bolts); compatible insert clearance angle: positive 5° (B), positive 7° (C); clamping method: screw-on (S).

Select to compare

Configure now
Starting from^∗ ：	169.79 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Cartridge CoroTurn 107 Screw Clamp STSCR / L

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	242.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroBore 825

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	1,163.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	1,326.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK Steel Blank with Coromant Capto Coupling

SANDVIK

[Specifications]
・Type: Blank, Molding blank
・Coolant: No
・Cutting Direction: Neutral
・eClass-5.1: 21021105, 21029112

Select to compare

Configure now
Min. Shipping Days ：	5 Days

EWN Boring Head Set (For Finishing / Insert Holder Type)

BIG KAISER

[Specifications]
・Applicable Tip Shape: T (Triangle)
・Application: Internal Diameter
・Compatible Tip: TP08, TC11
・Lubrication Hole Y/N: Available

[Features]
・The EWN single cutter boring tool program for fine boring covers a range of Ø 20-203 mm with only 7 fine boring heads
・Due to the optimized balance over the whole adjustment range, cutting speeds up to 1200 m/min are permitted

Select to compare

Configure now
Starting from^∗ ：	684.14 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

EZH-ST Sleeve

KYOCERA

Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.

Select to compare

Configure now
Starting from^∗ ：	117.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter / Inner Face Machining)

KYOCERA

[Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamping method: screw on (S).

Select to compare

Configure now
Starting from^∗ ：	340.36 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

A-SVZC (B)-AE Type Excellent Bar (Drawing)

KYOCERA

[Features] Machining applications: Inner diameter, through hole, drawing; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B), positive 7° (C); clamping method: screw-on (S).

Select to compare

Configure now
Starting from^∗ ：	196.40 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S...WWLN08 Type Excellent Bar (Profiling)

KYOCERA

[Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert clearance angle: negative 0 (N); clamping method: non-ISO standard.

Select to compare

Configure now
Starting from^∗ ：	297.59 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN

SANDVIK

First recommendation for general turning for medium to large parts
Inserts with crushers and materials for all machining areas.

Select to compare

Configure now
Starting from^∗ ：	354.09 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

T-Max U Fine Boring Unit

SANDVIK

Unique shape exhibits high performance

Select to compare

Configure now
Starting from^∗ ：	701.39 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L

SANDVIK

[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.

Select to compare

Configure now
Starting from^∗ ：	200.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Cartridge CoroTurn 107 Screw Clamp STFCR / L

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	242.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroTurn SL, Coromant Capto Adapter

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	547.63 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Coromant Capto Cutting Head For Inner-Diameter Turning SVQBR / L

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	581.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Sandvik COROMANT CAPTO Manual Clamp Holder

SANDVIK

[Features]
· Clamping unit.
· Features the high precision and rigidity of Coromant Capto. Can be used for quick changes.
[Applications]
· For any turning.

Select to compare

Configure now
Starting from^∗ ：	1,954.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTurn 107 Boring Bar for Back Boring

SANDVIK

[Specifications]
・Type: Boring bar
・Cutting Direction: Right-hand, Left-handm
・For back boring
・eClass-5.1: 21010903

Select to compare

Configure now
Starting from^∗ ：	247.69 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK Coromant Capto to Weldon Adaptor

SANDVIK

[Specifications]
・Type: Adapter
・Cutting Direction: Neutral
・Coolant: Yes-through center
・eClass-5.1: 21021105

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK Boring Adaptor

SANDVIK

[Specifications]
・Type: Miller mandrel holder
・Processing type: Rough machining-bore tolerance IT9
・Minimum Machining Diameter: 99mm
・eClass-5.1: 21021101

Select to compare

Configure now
Min. Shipping Days ：	Quote

SANDVIK Coromant Capto to Quick Change Tapping Chuck

SANDVIK

[Specifications]
・Type: Adapter
・Cutting Direction: Neutral
・Shank diameter : 19, 31, 48mm
・eClass-5.1: 21021105

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK T-Max P Boring Bar for Turning

SANDVIK

[Specifications]
・Type: Boring bar
・Internal or external machining: Boring bar for internal machining
・Coolant: Yes
・For turning
・eClass-5.1: 21010903

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK Coromant Capto to CoroTurn SL Damped Adaptor

SANDVIK

[Specifications]
・Type: Boring bar, Vibration-damped boring bar
・Cutting Direction: Right-hand, Left-hand, Neutral
・Minimum Machining Diameter: 20-80mm
・Overall Length L1: 125-968mm
・eClass-5.1: 21021105

[Features]
・Modular system of adapters and cutting heads
・For internal turning, grooving, threading, boring and multi-task machining
・For hole diameters down to 20 mm
・For machining in turning centers, lathes and multi-task machines
・CoroTurn SL cutting heads feature precision coolant nozzles for improved chip control and process security
・Quick change cutting heads as an option – easy-to-adjust cutting head for more flexible production

Select to compare

Configure now
Starting from^∗ ：	1,468.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroBore 825 XL Fine Boring Tool

SANDVIK

[Specifications]
・Cutting Direction: Neutral
・Processing type: Finishing - bore tolerance IT6
・Cooling lubricant: Yes - through center
・eClass-5.1: 21021105

[Features]
・CoroBore XL is the first choice for large-diameter fine boring. The tools can be adjusted radially in order to cover a certain diameter range with one tool. The tools allow precision adjustment in microns in order to achieve close hole tolerances
・CoroTurn 107 and CoroTurn 111 inserts with dedicated grades and geometries for all materials
・Excellent surface finish with wiper inserts
・Tool holders optimized for large-diameter boring
・Available with damped Silent Tools adapters for vibration-free boring in diameters 148–315 mm (5.827–12.402 inch), even at long overhangs
・Also available as lightweight tools: CoroBore lightweight boring tools reduce tool weight and tool change moment, enabling easier handling and larger diameters

Select to compare

Configure now
Starting from^∗ ：	3,851.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroThread 266 Boring Bar for Thread Turning

SANDVIK

[Specifications]
・Type: Boring bar
・Cutting Direction: Right-hand, Left-hand
・Bracket: Clamping technology: Screw clamping system
・External or internal machining: Internal machining
・eClass-5.1: 21010903

[Features]
・Highly rigid external and internal thread turning
・Optimize your tool path
・iLock interface
・Precision coolant solution

Select to compare

Configure now
Starting from^∗ ：	247.00 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK Cylindrical Shank to CoroTurn SL Damped Adaptor

SANDVIK

[Specifications]
・Type: Boring bar
・Cutting Direction: Neutral
・eClass-5.1: 21021105

[Features]
・CoroTurn SL cutting heads feature precision coolant nozzles for improved chip control and process security
・Quick change cutting heads as an option – easy-to-adjust cutting head for more flexible production

Select to compare

Configure now
Starting from^∗ ：	1,853.23 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroBore 820 XL Lightweight Rough Boring Tool

SANDVIK

[Specifications]
・Type: Assembly with bridge. Slide body and blade holder
・Minimum Machining Diameter: 148, 198, 248mm
・Overall Length L1: 102mm
・Shank diameter: 40mm
・eClass-5.1: 21010901

[Features]
・CoroBore 111 four-edged standard inserts with optimized grade selection for rough boring applications
・CoroTurn 107 and T-Max P inserts with optimized grades and geometries for all materials
・Reliable system with rigid interfaces between head and cartridge for stable and vibration-free boring
・Large assortment of different cartridges available for a wide range of applications, such as the CoroBore XL cartridge specifically targeting rough boring in complex materials.
・Also available as lightweight tools: CoroBore lightweight boring tools reduce tool weight and tool change moment, enabling easier handling and larger diameters
・Also available with damped Silent Tools adapters for vibration-free boring in diameters 148–300 mm (5.827–11.811 inch), even at long overhangs

Select to compare

Configure now
Min. Shipping Days ：	5 Days

EWN Boring Head Set (For Finishing / Round Bit Type)

BIG KAISER

[Specifications]
・Applicable Tip Shape: T (Triangle)
・Application: Internal Diameter
・Minimum Machining Diameter: 1
・L(mm): 28.5, 36, 45
・Lubrication Hole Y/N: Available

[Features]
・Fine boring head in integral, modular, and screw-on execution for the precise machining of bores

Select to compare

Configure now
Starting from^∗ ：	440.00 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

SW Boring Head (Rough Highly Rigid Type)

BIG KAISER

[Features] They can be used for BBT/BT shafts with double contact. [Features] They are a high rigidity type for roughing and can also be used for machining flat bearing surfaces.

Select to compare

Configure now
Starting from^∗ ：	327.00 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

EZB-HP (Internal Diameter Processing)

KYOCERA

Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.

Select to compare

Configure now
Starting from^∗ ：	26.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

EZH-CT Sleeve

KYOCERA

Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.

Select to compare

Configure now
Starting from^∗ ：	223.16 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

EZH-HP Sleeve

KYOCERA

Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.

Select to compare

Configure now
Starting from^∗ ：	158.53 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

VNB-S Type (Inner Diameter Machined) [Corner R (rε) Flathead Tolerance]

KYOCERA

[Features] Machining applications: Inner diameter, through hole; compatible insert shape: non-ISO standard; compatible insert relief angle: positive 7° (C); clamping method: non-ISO standard, screw-on (S).

Select to compare

Configure now
Starting from^∗ ：	31.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Applicable Tip Shape
Minimum Machining Diameter
Application
Cutting Direction
Clamp Shape
Overall Length L1
Clearance angle
Shank diameter
Protrusion length (L/D)
Lubrication Hole Y/N

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	SANDVIK	SANDVIK	SANDVIK	BIG KAISER	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KYOCERA	SANDVIK	SANDVIK	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	BIG KAISER	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	BIG KAISER	BIG KAISER	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product Series	SANDVIK Coromant Capto to Fine Boring Head Adaptor	SANDVIK CoroTurn 111 Boring Bar for Back Boring	SANDVIK CoroBore 826 XL Fine Boring Tool	Insert Holder For EWN Boring Head Replacement	Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SCLCR / L-R	CoroTurn HP SL Cutting Head PCLN	SANDVIK Coromant Capto Reduction Adaptor	SANDVIK CoroBore 825 Fine Boring Head	SANDVIK Coromant Capto Extension Adaptor	A / S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	CoroTurn XS Insert Bar for Turning CXS-..T098	CoroTurn SL Coromant Capto Dampened Boring Tool Bit, C-570-3C	A-SVPC (B)-AE Type Excellent Bar (Undercutting and Profiling)	Cartridge CoroTurn 107 Screw Clamp STSCR / L	CoroBore 825	CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC	SANDVIK Steel Blank with Coromant Capto Coupling	EWN Boring Head Set (For Finishing / Insert Holder Type)	EZH-ST Sleeve	E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter / Inner Face Machining)	A-SVZC (B)-AE Type Excellent Bar (Drawing)	S...WWLN08 Type Excellent Bar (Profiling)	T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN	T-Max U Fine Boring Unit	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L	Cartridge CoroTurn 107 Screw Clamp STFCR / L	CoroTurn SL, Coromant Capto Adapter	Coromant Capto Cutting Head For Inner-Diameter Turning SVQBR / L	Sandvik COROMANT CAPTO Manual Clamp Holder	SANDVIK CoroTurn 107 Boring Bar for Back Boring	SANDVIK Coromant Capto to Weldon Adaptor	SANDVIK Boring Adaptor	SANDVIK Coromant Capto to Quick Change Tapping Chuck	SANDVIK T-Max P Boring Bar for Turning	SANDVIK Coromant Capto to CoroTurn SL Damped Adaptor	SANDVIK CoroBore 825 XL Fine Boring Tool	SANDVIK CoroThread 266 Boring Bar for Thread Turning	SANDVIK Cylindrical Shank to CoroTurn SL Damped Adaptor	SANDVIK CoroBore 820 XL Lightweight Rough Boring Tool	EWN Boring Head Set (For Finishing / Round Bit Type)	SW Boring Head (Rough Highly Rigid Type)	EZB-HP (Internal Diameter Processing)	EZH-CT Sleeve	EZH-HP Sleeve	VNB-S Type (Inner Diameter Machined) [Corner R (rε) Flathead Tolerance]
Starting from^∗	1,245.23 € *Unit price with basic configuration	194.38 € *Unit price with basic configuration	-	65.54 € *Unit price with basic configuration Volume Discount	362.20 € *Unit price with basic configuration	523.29 € *Unit price with basic configuration	473.54 € *Unit price with basic configuration	1,645.69 € *Unit price with basic configuration	469.15 € *Unit price with basic configuration	110.99 € *Unit price with basic configuration	49.55 € *Unit price with basic configuration	1,530.38 € *Unit price with basic configuration	169.79 € *Unit price with basic configuration	242.34 € *Unit price with basic configuration	1,163.14 € *Unit price with basic configuration	1,326.11 € *Unit price with basic configuration	-	684.14 € *Unit price with basic configuration	117.40 € *Unit price with basic configuration	340.36 € *Unit price with basic configuration	196.40 € *Unit price with basic configuration	297.59 € *Unit price with basic configuration	354.09 € *Unit price with basic configuration	701.39 € *Unit price with basic configuration	200.41 € *Unit price with basic configuration	242.34 € *Unit price with basic configuration	547.63 € *Unit price with basic configuration	581.45 € *Unit price with basic configuration	1,954.35 € *Unit price with basic configuration	247.69 € *Unit price with basic configuration	-	-	-	-	1,468.85 € *Unit price with basic configuration	3,851.15 € *Unit price with basic configuration	247.00 € *Unit price with basic configuration	1,853.23 € *Unit price with basic configuration	-	440.00 € *Unit price with basic configuration	327.00 € *Unit price with basic configuration	26.64 € *Unit price with basic configuration	223.16 € *Unit price with basic configuration	158.53 € *Unit price with basic configuration	31.92 € *Unit price with basic configuration
Min. Shipping Days	5 Days	5 Days	5 Days	5 Days	8 Days	8 Days	5 Days	5 Days	5 Days	6 Days	6 Days	8 Days	8 Days	6 Days	6 Days	6 Days	5 Days	5 Days	6 Days	8 Days	8 Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	5 Days	5 Days	Quote	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	7 Days	6 Days	8 Days	6 Days	6 Days
Applicable Tip Shape	-	-	-	T (Triangle)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	-	-	-	C (80° Diamond-Shape)	-	-	V (35° Diamond-Shaped)	T (Triangle)	-	T (Triangle)	-	T (Triangle)	-	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	W (Hexagonal Type)	C (80° Diamond-Shape)	-	V (35° Diamond-Shaped)	T (Triangle)	-	V (35° Diamond-Shaped)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Minimum Machining Diameter	3	21.59	148 ～ 248	-	10	34 ～ 56	-	150	-	5 ～ 27	0.3 ～ 7.2	20 ～ 50	14 ～ 40	20 ～ 50	-	19 ～ 136	-	20 ～ 100	-	14 ～ 27	16 ～ 40	28 ～ 40	20 ～ 63	-	22	20 ～ 55	-	22 ～ 63	-	26.6954 ～ 40.1066	-	99	-	20 ～ 82.499	20 ～ 80	148 ～ 1018	20 ～ 63	19.9898 ～ 80.01	148 ～ 248	1	20 ～ 148	2 ～ 6	-	-	1 ～ 4
Application	-	-	-	Internal Diameter	Internal Diameter	Internal Diameter	-	-	-	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Inner diameter profiling	Internal Diameter / Inner diameter profiling	-	Internal Diameter	-	Internal Diameter	-	Internal Diameter	Pull	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter / Inner diameter profiling	-	-	-	-	-	-	-	-	-	-	-	Internal Diameter	Internal Diameter	-	-	-	Internal Diameter
Cutting Direction	IKOU	Right-hand	IKOU	-	Right-hand / Left-hand	Right-hand / Left-hand	IKOU	-	IKOU	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand / Left-hand	-	-	IKOU	-	-	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	IKOU	-	IKOU	Right-hand / Left-hand	Right-hand / Left-hand / IKOU	IKOU	Right-hand / Left-hand	IKOU	IKOU	-	-	Right-hand	-	-	Right-hand
Clamp Shape	-	-	-	-	Screw-on	Lever lock	-	-	-	Screw-on	-	-	Screw-on	Screw-on	-	Screw-on	-	-	-	Screw-on	Screw-on	Wedge Lock	Lever lock	-	Screw-on	Screw-on	-	Screw-on	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Overall Length L1	48 ～ 85	203.2	90 ～ 136	-	125	28 ～ 42	90 ～ 110	-	-	100 ～ 250	27.25 ～ 72.25	-	140 ～ 250	25.5 ～ 57.2	-	-	60 ～ 200	-	80 ～ 135	90 ～ 300	150 ～ 250	250	200 ～ 350	24.1 ～ 62.7	200	25 ～ 63	-	-	-	250 ～ 304.8	-	-	-	200 ～ 400.101	125 ～ 968	90 ～ 218	125 ～ 406.4	199.898 ～ 849.12	102	-	-	32 ～ 66.1	120 ～ 135	100 ～ 135	26.5 ～ 39.8
Clearance angle	-	-	-	-	7°	-	-	-	-	7°	-	-	5°	-	-	-	-	-	-	11°	5° / 7°	-	0°	-	7°	-	-	5°	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank diameter	-	15.88	33	-	8	25 ～ 40	-	-	-	8 ～ 25	4 ～ 7	-	10 ～ 32	-	-	-	32 ～ 160	-	-	12 ～ 25	12 ～ 32	25 ～ 32	16 ～ 50	16 ～ 32	16	-	-	-	-	19.05 ～ 31.75	6 ～ 50	-	19 ～ 48	15.88 ～ 63.5	16 ～ 60	33 ～ 40	15.88 ～ 50.8	15.88 \| 16 ～ 60 \| 63.5	40	-	-	2 ～ 6	-	-	-
Protrusion length (L/D)	-	-	-	-	48	-	-	-	-	～5.5	-	-	～5.5	-	-	-	-	-	-	~7	～5.5	Up to 5	64 ～ 200	-	24～64	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lubrication Hole Y/N	-	-	-	-	Available	Available	-	-	-	Available / N/A	N/A	Available	Available	N/A	Available	Available	-	Available	-	Available	Available	N/A	Available	N/A	Available	N/A	Available	Available	-	-	-	-	-	-	-	-	-	-	-	Available	Available	-	-	-	-

1
2
3
4
5
Next >>

Filter by:

Stock

- Show only stock items
Clear

Applicable Tip Shape
Images

Clear

Minimum Machining Diameter
0.3

0.5

0.6

0.9

1

1.5

1.95

2

2.5

3

3.2

3.5

4

4.2

4.5

5

5.0 mm

5.2

5.5

6

6.0 mm

6.2

6.5

6.604

7

7.2

7.5

8

8.0 mm

8.2042

8.5

8.6868

9

10

10.0 mm

10.2108

10.4902

11

12

12.0 mm

12.192

12.7

13

14

14.0 mm

15

15.1892

16

16.3068

17

17.2974

18

18.0 mm

18.4912

18.9992

19

19.6088

19.9898

20

20/30

20.1

20.62

21

21.59

22

23

23.5966

24.892

24.9

24.99

24.9936

24.994

25

ø25

25/37

25.4

25.7048

26

26.01

26.6954

27

28

29

30

30.505

30.5054

31

31.496

31.5

31.801

32

ø32

32.004

32.512

32.9946

32.995

33

33 mm

34

35

35.45

36.45

37

37.287

37.2872

37.313

37.45

38

38.1

38.45

38.913

39.45

40

40/55

40.005

40.01

40.1

40.1066

40.132

40.45

41

41.45

41.5

42.45

43

43.307

43.45

44

ø44

44.45

44.704

45

45.0088

45.45

46

46.45

46.99

47

47.45

48

48.45

49.3014

49.45

50

50 mm

50/75

50.01

50.0126

50.038

50.45

50.8

51

51.45

52

52.45

53

53.45

54

54.0004

54.45

54.99

55

55.35

56

56.35

57

57.35

58.35

59.35

59.99

60

60/75

60.35

61.01

61.011

61.35

62

ø62

62.35

62.992

63

63.35

63.5

63.98

64

64.35

64.7954

65

65.35

66.35

67.35

67.894

68

68.35

69

69.35

70

70/90

70.35

71.35

72

72.35

73.35

74.35

75

75.01

75.35

76.35

77.013

77.35

78.35

79.35

80

80.01

80.35

81.35

82.35

82.499

83

83.35

84.35

85

85.35

86

86.35

87.35

ø88

88.35

89

89.35

90

90.35

98

99

99.9998

100

105

106

109

111.35

115

119.9896

120

123

ø125

130

132.35

135

136

139.7

140

145

148

150

153.35

166

170

172.72

188

198

212

220

223.52

228

248

250

258

275

279.4

298

378

458

538

778

1018
Clear

Application
Clear

Cutting Direction
Clear

Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Lever lock
- Wedge Lock
- Other
Clear

Overall Length L1
3

10

10.2

11

11.2

13

13.2

14

15

15.9

18

18.3

20

20.3

22

22.3

24

24.1

24.2

24.9936

25

25.15

25.5

26.5

27

27.25

27.26

27.3

27.4

28

28.1

29.9974

30

30.8

31

32

32.25

32.26

32.3

32.4

32.5

32.9

33.7

33.8

34

34.1

34.8

35

36

37.25

37.26

37.3

37.5

37.6

38

38.9

39

39.5

39.8

39.9

40

40.005

42

42.25

42.3

42.5

43

43.26

43.3

44.3

45

45.0088

45.3

47

47.25

47.3

47.6

47.9

48

48.8

49

49.8

49.9872

50

50.1

51

51.9

52.2

52.25

52.3

52.7

54.4

55

55.3

56

57.2

57.25

57.3

57.8

58

58.1

58.2

59.9948

60

60.8

61.3

62

62.25

62.3

62.7

63

63.2

65

66

66.1

66.2

67.25

68

70

70.3

72

72.25

73.1

73.7

74.2

75

75.0062

76

78

80

80 mm

81

82

82.499

82.55

83

83.1

85

87

88

89

90

90 mm

91

93

95

96

97

98

99.009

100

100 mm

100.00 - 104.00

101

101.6

102

103

104.648

105

106

106.934

110

110 mm

111

112

113

113.65

114

115

117

118

119

119.9896

120

120 mm

121

122

124

124.993

125

125 mm

125.5

127

128

129.1

130

131

132

132.08

133

134

134.0612

134.3914

135

135.65

136

137.1

139.7

140

143

145

147

150

150 mm

150.012

150.0124

152

152.4

154

154.7876

156

156.6926

158

159.4612

159.7914

160

164

165

167

170

175

177

180

180 mm

180.0098

185

189.992

190

195

198

199.898

200

203.2

203.962

204.6

205.0034

218

220

221.996

224

225

230

240

250

254

254.9906

255

255.194

260

260.096

270

273.05

275

280

285

288

300

300 mm

304.8

310

312.2

313

315

320

325

329.9968

330

332

335.534

340

350

350 mm

355.6

360

365

368

373.888

378.9934

380

381

393

400

400.1

400.101

406.4

410

412.496

420

430

435.991

448

468

475.996

480

502.92

510

518.92

526.796

544

559.9938

560

608

620

658.62

666.496

671.32

678.942

688

755

760

768

849.12

861

880

920

955

968

1040

1100

1200

1240

1400

1500

1560

1760

1900

2000

2200

2400

2600

2800

3200

3450

4000
Drawing

Clear

Clearance angle
- 5°
- 7°
- 20°
- 0°
- 11°
Clear

Shank diameter
1.7

1.8

2

2.5

3

3.5

4

4.78

5

6

6.35

7

7.92

8

9.5

9.53

10

11.6 | 80

12

12.7

14

15.875 mm

15.88

15.88 | 16

16

18

19

19.05

19.05 mm

19.05 | 20

19.1

20

20 mm

ø20 mm

22

22 mm

22.2

23 mm

23.2 | 80

24

25

25.0 mm

25.4

25.4 mm

25.4 | 25

27

31

31.75

31.75 | 32

31.8

32

32 | 40

32 | 50

32 | 63

33

34

38.1

38.1 | 32

38.1 | 40

40

40 | 44.45

40 | 50

40 | 50.8

40 | 60

40 | 63

40 | 63.5

40 | 80

40 | 100

42

45

48

50

50 | 50.8

50.01

50.8

54

60

60 | 63.5

62.99

63

63 | 70

63.5

64

65 | 80

70

70 | 100

75

76.2 | 80

80

80 | 100

80 | 120

80 | 127

80 | 130

80 | 140

80 | 150

80 | 152.4

80 | 160

80 | 180

80 | 200

80 | 220

80 | 250

80 | 254

82

90

95

100

110

120

130

145

160
Clear

Protrusion length (L/D)
Up to 3

Up to 4

Up to 5

Minimum: 5; Maximum: 18

～5.5

Minimum: 6.3; Maximum: 19.5

~7

7.5～20

Minimum: 7.5; Maximum: 21

Minimum: 8.8; Maximum: 24.5

9 to 24

Minimum: 10; Maximum: 28

11

12～32

Minimum: 12.5; Maximum: 35

15–40

18～48

20

24

24～64

30

30~80

32

32.5～64

34

35

36

37

37.5～100

38

40

42

45

48

48～128

49～100

60

60–100

60～160

64

72

80

80/160

96

100

120

128

135

150

160

165

200

225

240

285

330
Clear