BLICKLE Castors, Accessories（Page 10）

Search by sub-category

542

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less

?* Information on days to ship and prices

Stainless Steel Swivel Castor, LIX-VKHT Series

BLICKLE

Stainless Steel Swivel Castor, with Top Plate Fitting, Heat-Resistant, Blickle Templine® Wheel Special, with Solid Rubber Tyres, with Synthetic Rim, Heat-Resistant

Bracket: LIX series

high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
all parts including axle material are corrosion-resistant
double ball bearing in the swivel head
strong central kingpin
smooth rolling characteristic and low wear, increased service life
swivel head play is set specifically for high-temperature applications
grease-free as standard (“-OF”)

Wheel: VKHT series

tyre: highly heat-resistant solid rubber, hardness 85 Shore A, colour black
rim: highly heat-resistant nylon 6, impact resistant, colour black

Other features:

high chemical resistance to many aggressive substances, except oils
operating temperature: -30 °C to +260 °C
oven temperature temporarily up to +300 °C, wheel temperature must not exceed +260 °C
tyre flattening recovers when in motion under load

Starting from^∗ ：	142.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-ALB Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Aluminium Wheel Centre

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: ALB series

tread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	114.57 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-ALEV Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Aluminium Wheel Centre

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: ALEV series

tyre: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, colour black
wheel centre: die-cast aluminium

Other features:

high chemical resistance to many aggressive substances, except oils
operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C

Starting from^∗ ：	66.41 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-ALST Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Aluminium Wheel Centre

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: ALST series

tread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	87.06 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Synthetic Twin Wheel Swivel Castor, LKDB-PUA Series

BLICKLE

Synthetic Twin Wheel Swivel Castor, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre

Bracket: LKDB series

high-quality nylon 6, impact resistant
high-quality synthetic plain bore in the swivel head
colour black RAL 9005

Wheel: PUA series

tread: high-quality thermoplastic polyurethane (TPU), hardness 92 Shore A, colour black, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour black RAL 9005

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +80 °C, reduced load capacity over +30 °C
Castors are not approved for office chairs.

Starting from^∗ ：	9.88 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Blickle Synthetic Twin Castor Move, LKDGH-PATH Series

BLICKLE

Blickle Synthetic Twin Castor Move, with Special Mounting Height, Colour Silver Grey, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre

Bracket: LKDGH series

high-quality nylon 6, impact resistant
two grooved ball bearings in the swivel head sealed on both sides
bolt hole
colour silver grey RAL 7001
modern, appealing design
with special mounting height

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour silver grey RAL 7001

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, temporarily up to +80 °C, reduced load capacity over +30 °C

Starting from^∗ ：	46.53 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Blickle Synthetic Twin Castor Move, LKDG-PATH Series

BLICKLE

Blickle Synthetic Twin Castor Move, Colour Silver Grey, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre

Bracket: LKD series

high-quality nylon 6, impact resistant
two grooved ball bearings in the swivel head sealed on both sides
bolt hole
colour grey white RAL 9002
modern, appealing design

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour grey white RAL 9002

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, temporarily up to +80 °C, reduced load capacity over +30 °C

Starting from^∗ ：	45.73 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Synthetic Twin Wheel Swivel Castor, LKDG-PUA Series

BLICKLE

Synthetic Twin Wheel Swivel Castor, Colour Light Grey, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre

Bracket: LKDG series

high-quality nylon 6, impact resistant
high-quality synthetic plain bore in the swivel head
colour light grey RAL 7035

Wheel: PUA series

tread: high-quality thermoplastic polyurethane (TPU), hardness 92 Shore A, colour black, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour light grey RAL 7035

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +80 °C, reduced load capacity over +30 °C

Starting from^∗ ：	39.97 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Blickle Synthetic Twin Castor Move, LKDGXH-PATH Series

BLICKLE

Blickle Synthetic Twin Castor Move, with Special Mounting Height, Corrosion-Resistant, Colour Silver Grey, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre, LKDGXH-PATH Series

Bracket: LKDGXH series

high-quality nylon 6, impact resistant
two corrosion-resistant grooved ball bearings in swivel head sealed on both sides
bolt hole
colour silver grey RAL 7001
all parts including axle material are corrosion-resistant
modern, appealing design
with special mounting height

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour silver grey RAL 7001

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, temporarily up to +80 °C, reduced load capacity over +30 °C

Starting from^∗ ：	61.25 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Blickle Synthetic Twin Castor Move, LKDGX-PATH Series

BLICKLE

Blickle Synthetic Twin Castor Move, Corrosion-Resistant, Colour Silver Grey, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre

Bracket: LKDGX series

high-quality nylon 6, impact resistant
two corrosion-resistant grooved ball bearings in swivel head sealed on both sides
bolt hole
colour silver grey RAL 7001
all parts including axle material are corrosion-resistant
modern, appealing design

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour silver grey RAL 7001

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, temporarily up to +80 °C, reduced load capacity over +30 °C

Starting from^∗ ：	60.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Blickle Synthetic Twin Castor Move, LKDH-PATH Series

BLICKLE

Blickle Synthetic Twin Castor Move, with Special Mounting Height, Colour Grey White Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre

Bracket: LKDH series

high-quality nylon 6, impact resistant
two grooved ball bearings in the swivel head sealed on both sides
bolt hole
colour grey white RAL 9002
modern, appealing design
with special mounting height

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour grey white RAL 9002

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, temporarily up to +80 °C, reduced load capacity over +30 °C

Starting from^∗ ：	46.53 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Blickle Synthetic Twin Castor Move, LKD-PATH Series

BLICKLE

Blickle Synthetic Twin Castor Move, Colour Grey White, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre

Bracket: LKD series

high-quality nylon 6, impact resistant
two grooved ball bearings in the swivel head sealed on both sides
bolt hole
colour grey white RAL 9002
modern, appealing design

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour grey white RAL 9002

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, temporarily up to +80 °C, reduced load capacity over +30 °C

Starting from^∗ ：	45.73 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Blickle Synthetic Twin Castor Move, LKDXH-PATH Series

BLICKLE

high-quality nylon 6, impact resistant
two corrosion-resistant grooved ball bearings in swivel head sealed on both sides
bolt hole
colour silver grey RAL 7001
all parts including axle material are corrosion-resistant
modern, appealing design
with special mounting height

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour grey white RAL 9002

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, temporarily up to +80 °C, reduced load capacity over +30 °C

Starting from^∗ ：	61.25 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Blickle Synthetic Twin Castor Move, LKDX-PATH Series

BLICKLE

Blickle Synthetic Twin Castor Move, Corrosion-Resistant, Colour Grey White, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre

Bracket: LKDX series

high-quality nylon 6, impact resistant
two corrosion-resistant grooved ball bearings in swivel head sealed on both sides
bolt hole
colour grey white RAL 9002
all parts including axle material are corrosion-resistant
modern, appealing design

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour grey white RAL 9002

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, temporarily up to +80 °C, reduced load capacity over +30 °C

Starting from^∗ ：	60.45 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Blickle Synthetic Swivel Castor Flow, LKFG-TPA Series

BLICKLE

Blickle Synthetic Swivel Castor Flow, Colour Silver Grey, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre

Bracket: LKFG series

high-quality thermoplastic
colour silver grey RAL 7001
double ball bearing in the swivel head
bolt hole
modern, appealing design

Wheel: TPA series

tread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containing
wheel centre: high-quality polypropylene, impact resistant, colour silver grey RAL 7001

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +50 °C, reduced load capacity over +30 °C
tread contains oil, may stain sensitive surfaces

Starting from^∗ ：	25.45 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Blickle Synthetic Swivel Castor Flow, LKFGX-TPA Series

BLICKLE

Blickle Synthetic Swivel Castor Flow, Corrosion-Resistant, Colour Silver Grey, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre

Bracket: LKFGX series

high-quality thermoplastic
double corrosion-resistant ball bearing in the swivel head
bolt hole
colour silver grey RAL 7001
all parts including axle material are corrosion-resistant
modern, appealing design

Wheel: TPA series

tread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containing
wheel centre: high-quality polypropylene, impact resistant, colour silver grey RAL 7001

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +50 °C, reduced load capacity over +30 °C
tread contains oil, may stain sensitive surfaces

Starting from^∗ ：	30.03 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-G Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Cast Iron Wheel

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: G series

rugged grey cast iron, hardness 180–220 HB, grease nipple, lacquered, colour silver

Other features:

chemical resistance to many aggressive substances
consider the surface pressure on sensitive floors due to high point loads
to be lubricated according to the application temperature

Starting from^∗ ：	46.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-GSPO Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel Made of Compressed Cast Nylon

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: GSPO series

high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

Other features:

high chemical resistance to many aggressive substances
reduced moisture absorption
operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
consider the surface pressure on sensitive floors due to high point loads
Test in compliance with DIN 12530 with extended breaks to avoid thermal overloading

Starting from^∗ ：	109.57 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKPA-GSPO Series

BLICKLE

Light Duty Swivel Castor, with Top Plate Fitting, Heavy Duty Wheel Made of Compressed Cast Nylon, LKPA-GSPO Series

Bracket: LKPA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: GSPO series

high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

Other features:

high chemical resistance to many aggressive substances
reduced moisture absorption
operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
consider the surface pressure on sensitive floors due to high point loads
Test in compliance with DIN 12530 with extended breaks to avoid thermal overloading

Starting from^∗ ：	57.34 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKPA-PATH Series

BLICKLE

Light Duty Swivel Castor, with Top Plate Fitting Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre, LKPA-PATH Series

Bracket: LKPA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour silver grey

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

Starting from^∗ ：	26.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKPA-POA Series

BLICKLE

Light Duty Swivel Castor, with Top Plate Fitting, Nylon Wheel, LKPA-POA Series

Bracket: LKPA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POA series

high-quality nylon 6, impact resistant, hardness 70 Shore D, colour black

Other features:

high chemical resistance to many aggressive substances
operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

Starting from^∗ ：	19.40 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKPA-POES Series

BLICKLE

Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with 'Blickle Softmotion' Soft Rubber Tyre, with Nylon Wheel Centre, Non-Marking, Grey, with Synthetic Thread Guard

Bracket: LKPA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POES series

tyre: high-quality elastic solid rubber "Blickle SoftMotion", hardness 55 Shore A, colour grey, non-marking
wheel centre: high-quality nylon 6, impact resistant, colour black

Other features:

with synthetic thread guard, large
high chemical resistance to many aggressive substances, except oils
operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +35 °C

Starting from^∗ ：	44.59 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKPA-TPA Series

BLICKLE

Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre, LKPA-TPA Series

Bracket: LKPA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: TPA series

tread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containing
wheel centre: high-quality polypropylene, impact resistant, colour silver grey

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
tread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

Starting from^∗ ：	22.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKPA-VPA Series

BLICKLE

Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Solid Rubber Tyres, with Synthetic Rim, LKPA-VPA Series

Bracket: LKPA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: VPA series

tyre: high-quality solid rubber, hardness 80 Shore A, colour grey, non-marking, non-staining
rim: high-quality nylon 6 or polypropylene in the electrically conductive version "-EL", impact resistant, colour black

Other features:

high chemical resistance to many aggressive substances, except oils
operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

Starting from^∗ ：	23.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKPA-VSTH Series

BLICKLE

Light Duty Swivel Castor, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Steel Wheel Centre, LKPA-VSTH Series

Bracket: LKPA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: VSTH series

tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
wheel centre: steel

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	44.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-PO Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Nylon Wheel

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: PO series

high-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural white

Other features:

high chemical resistance to many aggressive substances
operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

Starting from^∗ ：	34.11 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-POEV Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Nylon Wheel Centre

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POEV series

tyre: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, colour black
wheel centre: high-quality nylon 6, impact resistant, colour black

Other features:

high chemical resistance to many aggressive substances, except oils
operating temperature: -25 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +35 °C

Starting from^∗ ：	51.50 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-POTH Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Wheel, with Thermoplastic Polyurethane Tread, with Heavy Duty Nylon Wheel Centre

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POTH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour natural white

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

Starting from^∗ ：	50.19 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-POTHS Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Wheel, with Soft Thermoplastic Polyurethane Tread, with Heavy Duty Nylon Wheel Centre

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POTHS series

tread: high-quality thermoplastic polyurethane (TPU), hardness 80 Shore A, colour blue, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour natural white

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

Starting from^∗ ：	57.20 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-POW Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Nylon Wheel, with Rubber Damping Ring, Low Noise, with Synthetic Thread Guard

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POW series

high-quality nylon 6, impact resistant, hardness 70 Shore D, colour white
low-noise operation (-10 decibels) with elastic cushion layer made from elastic solid rubber, colour red

Other features:

with synthetic thread guard, large
high chemical resistance to many aggressive substances
operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C

Starting from^∗ ：	51.41 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Stainless Steel Light Duty Swivel Castor, LKPXA-PATH Series

BLICKLE

Stainless Steel Light Duty Swivel Castor, with Top Plate Fitting Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre

Bracket: LKPXA series

high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
all parts including axle material are corrosion-resistant
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: PATH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour silver grey

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

Starting from^∗ ：	71.72 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Stainless Steel Light Duty Swivel Castor, LKPXA-PO Series

BLICKLE

Stainless Steel Light Duty Swivel Castor, with Top Plate Fitting, Nylon Wheel, LKPXA-PO Series

Bracket: LKPXA series

high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
all parts including axle material are corrosion-resistant
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: PO series

high-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural white

Other features:

high chemical resistance to many aggressive substances
operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

Starting from^∗ ：	69.47 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Stainless Steel Light Duty Swivel Castor, LKPXA-VPA Series

BLICKLE

Stainless Steel Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Solid Rubber Tyres, with Synthetic Rim, LKPXA-VPA Series

Bracket: LKPXA series

high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
all parts including axle material are corrosion-resistant
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: VPA series

tyre: high-quality solid rubber, hardness 80 Shore A, colour grey, non-marking, non-staining
rim: high-quality nylon 6 or polypropylene in the electrically conductive version "-EL", impact resistant, colour black

Other features:

high chemical resistance to many aggressive substances, except oils
operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

Starting from^∗ ：	69.24 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKRA-GSPO Series

BLICKLE

Light Duty Swivel Castor, with Bolt Hole Fitting, Heavy Duty Wheel Made of Compressed Cast Nylon, LKRA-GSPO Series

Bracket: LKRA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: GSPO series

high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

Other features:

high chemical resistance to many aggressive substances
reduced moisture absorption
operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
consider the surface pressure on sensitive floors due to high point loads
Test in compliance with DIN 12530 with extended breaks to avoid thermal overloading

Starting from^∗ ：	56.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LKR-ALBS Series

BLICKLE

Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Aluminium Wheel Centre

Bracket: LKR series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: ALBS series

tread: high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, colour blue, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	113.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LKR-ALTH Series

BLICKLE

Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel Centre

Bracket: LKR series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: ALTH series

tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
wheel centre: die-cast aluminium, colour silver grey

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	95.16 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKRA-POA Series

BLICKLE

Light Duty Swivel Castor, with Bolt Hole Fitting, Nylon Wheel, LKRA-POA Series

Bracket: LKRA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POA series

high-quality nylon 6, impact resistant, hardness 70 Shore D, colour black

Other features:

high chemical resistance to many aggressive substances
operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

Starting from^∗ ：	18.70 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKRA-POES Series

BLICKLE

Light Duty Swivel Castor, with Bolt Hole Fitting, Wheel, with 'Blickle Softmotion' Soft Rubber Tyre, with Nylon Wheel Centre, Non-Marking, Grey, with Synthetic Thread Guard

Bracket: LKRA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POES series

tyre: high-quality elastic solid rubber "Blickle SoftMotion", hardness 55 Shore A, colour grey, non-marking
wheel centre: high-quality nylon 6, impact resistant, colour black

Other features:

with synthetic thread guard, large
high chemical resistance to many aggressive substances, except oils
operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +35 °C

Starting from^∗ ：	43.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Light Duty Swivel Castor, LKRA-VPA Series

BLICKLE

Light Duty Swivel Castor, with Bolt Hole Fitting, Wheel, with Solid Rubber Tyres, with Synthetic Rim, LKRA-VPA Series

Bracket: LKRA series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: VPA series

tyre: high-quality solid rubber, hardness 80 Shore A, colour grey, non-marking, non-staining
rim: high-quality nylon 6 or polypropylene in the electrically conductive version "-EL", impact resistant, colour black

Other features:

high chemical resistance to many aggressive substances, except oils
operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

Starting from^∗ ：	23.27 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LK-RD Series

BLICKLE

Pressed Steel Swivel Castor, Heavy Duty Design, Wheel, with 'Blickle Comfort' Two-Component Solid Rubber Tyres, with Pressed Steel Rim

Bracket: LK series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin (from wheel Ø 125x50 mm)
swivel head seal
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: RD series

tyre: two-component solid rubber "Blickle Comfort", hardness 56 Shore A, colour grey
rim: pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-free

Other features:

chemical resistance to many aggressive substances, except oils
operating temperature: -25 °C to +80 °C, reduced load capacity over +60 °C

Starting from^∗ ：	51.15 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LKR-POES Series

BLICKLE

Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Wheel, with 'Blickle Softmotion' Soft Rubber Tyre, with Nylon Wheel Centre, Non-Marking, Grey, with Synthetic Thread Guard

Bracket: LER series

pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POES series

tyre: high-quality elastic solid rubber "Blickle SoftMotion", hardness 55 Shore A, colour grey, non-marking
wheel centre: high-quality nylon 6, impact resistant, colour black

Other features:

with synthetic thread guard, large
high chemical resistance to many aggressive substances, except oils
operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +35 °C

Starting from^∗ ：	68.18 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LKR-POEV Series

BLICKLE

Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Nylon Wheel Centre

Bracket: LKR series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POEV series

tyre: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, colour black
wheel centre: high-quality nylon 6, impact resistant, colour black

Other features:

high chemical resistance to many aggressive substances, except oils
operating temperature: -25 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +35 °C

Starting from^∗ ：	67.67 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LKR-POTH Series

BLICKLE

Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Wheel, with Thermoplastic Polyurethane Tread, with Heavy Duty Nylon Wheel Centre

Bracket: LKR series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: POTH series

tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
wheel centre: high-quality nylon 6, impact resistant, colour natural white

Other features:

very high chemical resistance to many aggressive substances
operating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

Starting from^∗ ：	66.92 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LKR-SPO Series

BLICKLE

Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Nylon Heavy Duty Wheel

Bracket: LKR series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: SPO series

high-quality nylon 6, impact resistant, hardness 70 Shore D, extremely robust heavy-duty version, colour natural white

Other features:

high chemical resistance to many aggressive substances
operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

Starting from^∗ ：	57.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressed Steel Swivel Castor, LKR-VSTH Series

BLICKLE

Pressed Steel Swivel Castor, Medium Heavy Duty Brackets, with Bolt Hole Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Steel Wheel Centre

Bracket: LKR series

strong pressed steel, zinc-plated, blue-passivated, Cr6-free
double ball bearing in the swivel head
strong central kingpin
minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

Wheel: VSTH series

tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
wheel centre: steel

Other features:

high chemical resistance to many aggressive substances
operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Starting from^∗ ：	137.60 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Caster Type
Type
Mounting Height H(mm)
Load Range(daN)
Stopper
Wheel Material
Wheel Characteristics
Fitting Material
Mounting Hole Type
Mounting Hole Pitch, Long Length Direction L1(mm)
Mounting Hole Pitch, Short Length Direction W1(mm)
Thread Dia.
Wheel Dia. D(mm)
Mounting Hole Pitch Circular Diameter(mm)


Brand	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE	BLICKLE
Product Series	Stainless Steel Swivel Castor, LIX-VKHT Series	Pressed Steel Swivel Castor, LK-ALB Series	Pressed Steel Swivel Castor, LK-ALEV Series	Pressed Steel Swivel Castor, LK-ALST Series	Synthetic Twin Wheel Swivel Castor, LKDB-PUA Series	Blickle Synthetic Twin Castor Move, LKDGH-PATH Series	Blickle Synthetic Twin Castor Move, LKDG-PATH Series	Synthetic Twin Wheel Swivel Castor, LKDG-PUA Series	Blickle Synthetic Twin Castor Move, LKDGXH-PATH Series	Blickle Synthetic Twin Castor Move, LKDGX-PATH Series	Blickle Synthetic Twin Castor Move, LKDH-PATH Series	Blickle Synthetic Twin Castor Move, LKD-PATH Series	Blickle Synthetic Twin Castor Move, LKDXH-PATH Series	Blickle Synthetic Twin Castor Move, LKDX-PATH Series	Blickle Synthetic Swivel Castor Flow, LKFG-TPA Series	Blickle Synthetic Swivel Castor Flow, LKFGX-TPA Series	Pressed Steel Swivel Castor, LK-G Series	Pressed Steel Swivel Castor, LK-GSPO Series	Light Duty Swivel Castor, LKPA-GSPO Series	Light Duty Swivel Castor, LKPA-PATH Series	Light Duty Swivel Castor, LKPA-POA Series	Light Duty Swivel Castor, LKPA-POES Series	Light Duty Swivel Castor, LKPA-TPA Series	Light Duty Swivel Castor, LKPA-VPA Series	Light Duty Swivel Castor, LKPA-VSTH Series	Pressed Steel Swivel Castor, LK-PO Series	Pressed Steel Swivel Castor, LK-POEV Series	Pressed Steel Swivel Castor, LK-POTH Series	Pressed Steel Swivel Castor, LK-POTHS Series	Pressed Steel Swivel Castor, LK-POW Series	Stainless Steel Light Duty Swivel Castor, LKPXA-PATH Series	Stainless Steel Light Duty Swivel Castor, LKPXA-PO Series	Stainless Steel Light Duty Swivel Castor, LKPXA-VPA Series	Light Duty Swivel Castor, LKRA-GSPO Series	Pressed Steel Swivel Castor, LKR-ALBS Series	Pressed Steel Swivel Castor, LKR-ALTH Series	Light Duty Swivel Castor, LKRA-POA Series	Light Duty Swivel Castor, LKRA-POES Series	Light Duty Swivel Castor, LKRA-VPA Series	Pressed Steel Swivel Castor, LK-RD Series	Pressed Steel Swivel Castor, LKR-POES Series	Pressed Steel Swivel Castor, LKR-POEV Series	Pressed Steel Swivel Castor, LKR-POTH Series	Pressed Steel Swivel Castor, LKR-SPO Series	Pressed Steel Swivel Castor, LKR-VSTH Series
Starting from^∗	142.90 € *Unit price with basic configuration	114.57 € *Unit price with basic configuration	66.41 € *Unit price with basic configuration	87.06 € *Unit price with basic configuration	9.88 € *Unit price with basic configuration	46.53 € *Unit price with basic configuration	45.73 € *Unit price with basic configuration	39.97 € *Unit price with basic configuration	61.25 € *Unit price with basic configuration	60.45 € *Unit price with basic configuration	46.53 € *Unit price with basic configuration	45.73 € *Unit price with basic configuration	61.25 € *Unit price with basic configuration	60.45 € *Unit price with basic configuration	25.45 € *Unit price with basic configuration	30.03 € *Unit price with basic configuration	46.05 € *Unit price with basic configuration	109.57 € *Unit price with basic configuration	57.34 € *Unit price with basic configuration	26.46 € *Unit price with basic configuration	19.40 € *Unit price with basic configuration	44.59 € *Unit price with basic configuration	22.62 € *Unit price with basic configuration	23.98 € *Unit price with basic configuration	44.20 € *Unit price with basic configuration	34.11 € *Unit price with basic configuration	51.50 € *Unit price with basic configuration	50.19 € *Unit price with basic configuration	57.20 € *Unit price with basic configuration	51.41 € *Unit price with basic configuration	71.72 € *Unit price with basic configuration	69.47 € *Unit price with basic configuration	69.24 € *Unit price with basic configuration	56.98 € *Unit price with basic configuration	113.46 € *Unit price with basic configuration	95.16 € *Unit price with basic configuration	18.70 € *Unit price with basic configuration	43.95 € *Unit price with basic configuration	23.27 € *Unit price with basic configuration	51.15 € *Unit price with basic configuration	68.18 € *Unit price with basic configuration	67.67 € *Unit price with basic configuration	66.92 € *Unit price with basic configuration	57.45 € *Unit price with basic configuration	137.60 € *Unit price with basic configuration
Min. Shipping Days ：	5 Days	7 Days	5 Days	5 Days	5 Days	23 Days	5 Days	5 Days	23 Days	5 Days	23 Days	5 Days	23 Days	7 Days	23 Days	23 Days	5 Days	5 Days	7 Days	5 Days	5 Days	7 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	7 Days	7 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	23 Days	5 Days	5 Days	5 Days	7 Days
Caster Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type	Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type
Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Height H(mm)	202	130 ～ 245	130 ～ 262	110 ～ 262	66 ～ 245	103 ～ 135	103 ～ 130	121	103 ～ 135	103 ～ 130	103 ～ 135	103 ～ 130	103 ～ 135	103 ～ 161	130 ～ 161	130 ～ 202	73 ～ 245	111	111 ～ 136	73 ～ 185	130 ～ 155	155	111 ～ 161	73 ～ 185	130	108 ～ 262	110 ～ 262	108 ～ 262	130 ～ 245	111 ～ 161	111 ～ 161	161	110 ～ 155	110 ～ 130	130 ～ 155	133 ～ 136	70 ～ 185	133 ～ 161	70 ～ 185	88 ～ 245	130	110 ～ 155	108 ～ 155	88 ～ 136	136
Load Range(daN)	80.01 to 140.00	320.01 to 485.00 / 485.01 to 750.00	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	35.01 to 80.00 / 80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	320.01 to 485.00	140.01 to 220.00	80.01 to 140.00	80.01 to 140.00	80.01 to 140.00	35.01 to 80.00 / 80.01 to 140.00	35.01 to 80.00 / 80.01 to 140.00	140.01 to 220.00	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	140.01 to 220.00	80.01 to 140.00	80.01 to 140.00	35.01 to 80.00 / 80.01 to 140.00	140.01 to 220.00	220.01 to 320.00 / 320.01 to 485.00	140.01 to 220.00 / 320.01 to 485.00	80.01 to 140.00	80.01 to 140.00	35.01 to 80.00 / 80.01 to 140.00	80.01 to 140.00 / 220.01 to 320.00 / 320.01 to 485.00	80.01 to 140.00	140.01 to 220.00 / 220.01 to 320.00	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00	220.01 to 320.00 / 320.01 to 485.00	220.01 to 320.00
Stopper	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Wheel Material	Engineering Plastics	Aluminum	Aluminum	Aluminum	Engineering Plastics / Others	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Others	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Steel	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Aluminum	Aluminum	Engineering Plastics	Engineering Plastics	Engineering Plastics	Steel	Engineering Plastics	Engineering Plastics	Engineering Plastics	Engineering Plastics	Steel
Wheel Characteristics	-	-	Antistatic / Conductivity	Antistatic	Conductivity	Conductivity	Conductivity	Conductivity	Conductivity	Conductivity	Conductivity	Conductivity	Conductivity	Conductivity	-	-	Conductivity	-	Conductivity	-	Conductivity	Conductivity	Conductivity	Conductivity	Conductivity	Conductivity	Antistatic / Conductivity	-	Conductivity	Conductivity	Conductivity	Conductivity	Antistatic	-	Antistatic	-	-	Conductivity	Conductivity	-	-	-	-	-	-
Fitting Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Hole Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Hole Pitch, Long Length Direction L1(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Hole Pitch, Short Length Direction W1(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Thread Dia.	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Wheel Dia. D(mm)	160	100 ～ 200	100 ～ 200	80 ～ 200	50 ～ 200	100 ～ 125	100 ～ 125	100	100 ～ 125	100 ～ 125	100 ～ 125	100 ～ 125	100 ～ 125	100 ～ 125	100 ～ 125	100 ～ 160	50 ～ 200	80	80 ～ 100	50 ～ 150	100 ～ 125	125	80 ～ 125	50 ～ 150	100	75 ～ 200	80 ～ 200	75 ～ 200	100 ～ 200	80 ～ 125	80 ～ 125	125	80 ～ 125	80 ～ 100	100 ～ 125	100	50 ～ 150	100 ～ 125	50 ～ 150	65 ～ 200	100	80 ～ 125	75 ～ 125	65 ～ 100	100
Mounting Hole Pitch Circular Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Narrow search by specifying spec./dim.

Caster Type
- Plate Type Swivel
- Plate Type Fixed
- Screw-In Type
- With Shock Absorber
- With Leveling Mounts
- Plug-In Type
- Resin
- Through Hole Type
- Angle Type
- Others
- Related Components
- Corner Caster
- Dual Wheels
- Plate Type Ball Caster
- Rotation Type
- Rotation Brake Type
Images

Clear

Type
- Caster
Clear

Mounting Height H(mm)
12.5

21

23.5

26

30

32

34

35

36

39

40

42

42.5

43

43.5

44

44.5

45

46

46.5

47

48

49

50

50.5

51

51.5

52

53

54

54.5

55

56

57

57.5

58

58.5

59

59.5

60

61

62

63

63.5

64

65

65.5

66

67

68

68.5

69

70

70.5

71

72

72.5

73

74

74.5

75

76

77

77.5

78

79

79~72

79.5

80

81

82

83

84

84.5

85

86

87

87~75

87.5

88

89

89~77

90

91

92

92.5

93

94

95

96

96.5

97

98

99

100

101

102

102~95

102.5

103

104

104~99

105

106

107

108

109

110

111

111.5

112

112~100

112.5

113

114

114~102

115

117

117.5

118

119

120

121

122

123

124

124.5

125

126

126.5

127

127~120

128

129

129~122

130

130.5

132

133

133.5

134

135

136

137

137~125

138

139

139~127

140

141

142

143

143~135

144

145

146

147

148

150

151

152

152.5

153

153~145

153.5

154

155

156

157

158

159

160

161

162

162.5

163

164

165

165(142)

166

167

168

168.5

170

171

171~148

171~154

171~158

172

173

174

175

176

177

178

178.5

179

180

181

182

183

184

184.5

185

185 to 205

185.5

186(161)

186.6

187

188

189

190

191

192

193~167

193~173

193~177

193 to 183

194

195

196

196.6

197

198

199

199.5

200

202

203

205

209

210

210~198

212

213

214

215

217

217.5~337.5

218

219

220

223

225

230

230 to 250

233

235

236

237

239

240

241

242

243

245

246

246 to 236

247.3

250

250~235

251

252

255

256

257

260

260~250

262

264

265

267

270

272~392

275

275~255

275~260

280

285

287

289

290

292

293

295

300

302

304

305

306

307

308

311

312

314

315

317

318

320

325

330

350

355

358

360

365

367

370

371

374

375

378.5

380

390

394

395

420

430

450

458

470

473

475

478

480

495

500

518

520

530

580

600

618

623

630

675

710

730
Drawing

Clear

Load Range(daN)
Clear

Stopper
- Not Provided
- With Rotation Stopper
- With Swivel Stopper
- With Double Stopper (Rotation + Swivel)
Clear

Wheel Material
- Synthetic Rubber
- Nylon
- Urethane
- Polyurethane
- Phenol
- Engineering Plastics
- Steel
- Others
- Stainless Steel
- Rubber
- Elastomer
- Aluminum
Clear

Wheel Characteristics
- Abrasion Resistance
- Gasoline Resistant (including Light Oil)
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Low Temp. Resistance
- Antistatic
- Not Provided
- Conductivity
Details

Clear

Fitting Material
- Steel
- Stainless Steel
- Others
- Aluminum
- Steel
- Zinc
Clear

Mounting Hole Type
- Round Hole
- Slotted Hole
- Round holes (two holes)
- Round Holes (3 Holes)
Clear

Mounting Hole Pitch, Long Length Direction L1(mm)
12

14

19

25.4

26

28

29

30

32

36

38(48)

38.5(44)

38.5(48)

39.5(48)

40

42

43

44

45

45(60)

46

47

48

49

50

50(55)

51

52

52(62)

53

53(55)

54

54(55)

55

55(65)

56

58

59(80)

60

60(45)

60(66)

60(71)

62

63

63(78)

64

65

65(60)

66

67 (74)

67(74)

68

68 (71)

68(71)

68(73)

69

70

70(73)

70(80)

71

71(90)

72

72$68$69$70$71$73$74$67

72(82)

73

73(85)

73(87)

73.5

74

75

75$76$77$78$79$80$82$81

75(80)

75 (82)

75(82)

75(90)

76

76(80)

76(87)

76(92)

76.5(83)

77

78

78(80)

79

79(82)

80

80(84)

80(88)

80 (90)

80(90)

81

82

82(79)

83

84

85

86

87

87(93)

87 (94)

87(94)

88

89

90

90(100)

90(105)

91

91$87$88$89$90$94$92$93

93

93(103)

94

94(102)

95

95(100)

96

98(108)

100

100(112)

100(115)

101

102

103

103(113)

104

105

105(110)

105(112)

105 (115)

105(115)

105 (120)

105(120)

106

106(112)

107

107(112)

108

109

110

110(112)

111

112

112(100)

112(119)

112(120)

112 (140)

114

115

115(105)

116

120

121

122

124

125

125 (133)

125(133)

125.5(133.5)

127

128

130

133

133(148)

133(155)

134(144)

134(155)

135

135(145)

136

140

145

148

150

150(165)

152

155

160

162

163

165

166

167

168

170

172

173

174

175

180

183

184

185

192

194

215
Drawing

Clear

Mounting Hole Pitch, Short Length Direction W1(mm)
5

6

9

11

15

20

23

23(28)

24

25

25.4

26

27

28

29

30

32

34

35

36

38(48)

38.5(44)

38.5(48)

39.5(48)

40

40(45)

41

42

42(44)

43

44

45

45(50)

46

47

48

49

49(55)

50

50(55)

50(56)

50(58)

50 (63)

51

52

52(58)

52(62)

53

53(55)

53(56)

53(57)

54

54(64)

55

55(60)

55(63)

55(65)

56

56(50)

56(53)

56(63

57(60)

58

59

60

60(45)

60(63)

60(66)

60(71)

62

62(85)

62(85.5)

62 (86)

63

63(56)

63(78)

64

65

65(60)

67 (74)

67(74)

67(76)

68

68 (71)

68(71)

68(73)

69

70

70(73)

70(80)

71

71(90)

72

72$68$69$70$71$73$67$74

72(82)

73

75

75$76$77$78$79$80$81$82

75(80)

75 (82)

75(82)

75(85)

75(90)

76

76(64)

76.5(83)

77

78

78(80)

79

79(82)

80

80 (90)

80(90)

82(79)

85

85(104)

86

86(105)

87

87(93)

87 (94)

87(94)

90

90$94$88$87$89$91$92$93

90(100)

90(105)

94

95

100

100(12)

100(111)

100(112)

100(115)

102

104

105

105(105)

105(110)

105(112)

105 (115)

105(115)

105 (120)

105(120)

106(112)

107

110

112

112(63)

112(120)

115

115(105)

116

120

121

121(105)

122

125

128

130

133

134(144)

136

140

148

150

150(165)

151

155

160

165

167

170
Drawing

Clear

Thread Dia.
UNF1

UNF1/2

W3/4

UNC3/8

UNF3/8

W3/8

UNC5/16

M6

M8

M10

M12

M12(P1.75)

M14

M16

M20

M24
Drawing

Clear

Wheel Dia. D(mm)
13

15

15.875

18

19.05

20

22

25

25.4

30

32

35

36

37

38

39

40

41

42

45

47

48

50

51

52

54

55

57

58

60

61

61.5

62

63

64

65

68

70

72

73

74

75

76

78

80

82

84

85

90

92

98

100

100/125

101

102

105

108

117

120

124

125

125/145

126

127

130

137

138

140

150

150/175

152

153

157

160

175

180

181

185

186

197

200

200/230

203

210

218

220

225

230

245

246

247

248

250

251

253

254

257

260

280

286

290

293

294

295

300

305

306

350

360

400

405

415

420

455

460

500

520

525

536

600

620
Drawing

Clear

Mounting Hole Pitch Circular Diameter(mm)
6.3x10

28

34

35

40

48

51

53

54.5

68

80

100

144

198
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (65)
- Cost Efficient Products ()
- BLICKLE (542)
- ESCO (261)
- TORWEGGE (227)
- TOKAI CASTER (138)
- TAKIGEN(HAMMER CASTER) (117)
- NANSIN (103)
- YUEI CASTER (103)
- TAKIGEN (93)
- NORELEM (70)
- KIPP (70)
- GIFU SANKEN KOGYO (69)
- SISIKU ADDKREIS (67)
- BS ROLLEN (65)
- TRUSCO NAKAYAMA (55)
- UCHIMURA (53)
- OKAMOTO KOKI (33)
- TOSHIN CASTER (26)
- YODONO (25)
- TOSEI SHARYO (21)
- TOUHOKU SHARYO (19)
- ELESA (17)
- INOAC (14)
- SONRIN (12)
- SAMSONG (11)
- OHINDUSTRIAL (10)
- PARTS SEIKO (9)
- IMAO CORPORATION (7)
- SPACIO (6)
- HIKARI (5)
- HILOGIK (4)
- SUEHIRO(KATSUYAMA KIKAI) (3)
- EASTERN SEIKO (2)
- KYOMACHI (2)
- PREVOST (1)
- HAION (1)
- KURASHIKI KAKO (1)
- MAKITECH (1)
- NABEYA (1)
- ORII AND MEC (1)
- SUNCO (1)
- YAHATA NEJI (1)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

BLICKLE Castors, Accessories（Page 10）

Search by sub-category

Filter by:

Narrow search by specifying spec./dim.

Caster Type

Type

Mounting Height H(mm)

Load Range(daN)

Stopper

Wheel Material

Wheel Characteristics

Fitting Material

Mounting Hole Type

Mounting Hole Pitch, Long Length Direction L1(mm)

Mounting Hole Pitch, Short Length Direction W1(mm)

Thread Dia.

Wheel Dia. D(mm)

Mounting Hole Pitch Circular Diameter(mm)

Narrow search by specifying Brand

Narrow search by specifying CAD data type

Categories related to Castors, Accessories

Método de pago

Fabricación bajo demanda

Cambiar de vista

Certificados

MISUMI en todo el mundo

Redes sociales

Nota Legal