CHUO PRECISION INDUSTRIAL Holder

?* Information on days to ship and prices

• 

  Groove Type Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A holder for mirrors and charts, etc. Insert the corresponding item into the groove and fix in place with a clamp screw.
  · Duracon® is inserted at the tip of the clamp screw and a fluoropolymer sheet is attached to the other side in order to avoid scratching of the clamped item.
  "Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.

  2D CAD data available

  Starting from∗ ：	67.44 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Camera Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · HC-T3 and HC-T4 are products in which a ø12 mm shaft is attached to a free camera platform with tripod threads (nominal size 1/4).
  · HC-T2N is a product in which a ø12 mm shaft is attached to a single-handle camera platform with tripod threads (nominal size 1/4).

  2D CAD data available

  Starting from∗ ：	122.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Kinematic Round Mirror Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A three-point support type mirror holder.
  · The sample is fixed using set screws and a pad (round and square types only).
  · The set screw can be turned using a straight slot flathead screwdriver (not included). The round mirror holder is for circular optical devices. The tilt can be adjusted in the two axial directions.
  · The square mirror holder if for square optical devices. The tilt can be adjusted in the two axial directions.
  · The grooved mirror holder is for rectangular optical devices. The tilt can be adjusted in the two axial directions (square optical devices can also be used).

  2D CAD data available

  Starting from∗ ：	169.41 €
  Min. Shipping Days ：	16 Days

  *Unit price with basic configuration

• 

  Simple Mirror Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The mirror holder fixes optical devices by affixing them. As such, it can be used with both circular and rectangular shaped objects.
  · A kinematic type in which the tilt can be adjusted using the inclined fulcrum (right-top) as a guide.
  · Available with a shaft (ø8 mm, length 60 mm) or with a base plate (long hole for M6 screws).

  • Volume Discount

  2D CAD data available

  Starting from∗ ：	112.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adapter

  CHUO PRECISION INDUSTRIAL

  [Features]
  · For changing the aperture to fit the holder when using a lens that does not fit

  2D CAD data available

  Starting from∗ ：	46.97 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  V-Type Lens Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The HL-C30, HL-C70, and HL-C100 are lens holders with grooves for fixing lenses. There are three products available depending on the maximum size of the object that can be fixed.

  • Volume Discount

  2D CAD data available

  Starting from∗ ：	108.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cylindrical Lens Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A lens holder with a groove for fixing cylindrical lenses.

  2D CAD data available

  Starting from∗ ：	121.97 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Lens Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A holder for circular lenses (can also be used with mirrors).
  · Metal frame and shaft only. Does not include a tilt adjustment function.

  2D CAD data available

  Starting from∗ ：	130.25 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Polarizing Element Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The POH-30, POH-50 hold polarizing plates and wave plates and is used for the adjustment of polarizing surfaces, etc.
  · For devices such as Glan-Thompson prisms and wave plates with small external shapes, combine with an adapter for polarizer element holders.
  · When the coarse movement clamp is loosened, it can move coarsely over 360°. When the coarse movement clamp is tightened, it can perform fine adjustments on the micrometer head.
  · Since the scale ring moves independently, the zero point can be set to any angle.
  · The C-301- (1) is a holder for holding cube type prisms. It does not include a tilt adjustment function, etc.

  Starting from∗ ：	357.03 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  Press Ring Set

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A Duracon® ring set consisting of a press ring and cushioning material.
  "Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.

  2D CAD data available

  Starting from∗ ：	26.80 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Ring Wrench

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A ring wrench that uses bits.
  · Can be used with products that have slits in the press ring such as adapters, mirror holders, and lens holders.
  · The MHZ-1 is a fixed bit type. The range of use for the MHZ-2 can be increased by changing the position of the bit.

  2D CAD data available

  Starting from∗ ：	40.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Small and Thin Y Type Rail

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A Y type aluminum rail.
  · Carriers (the C-211(- 1)P and C-211(- 2)P) can be used for X type rails as is.
  · Can be used with a lower optical axis than X types.
  · The spacing between the M6 counterbore holes for attaching to surface plates is 100 mm.
  · With a lever type magnet stand mounted using the M4 counterbore holes, it is possible to magnetically attach and fix to surface plates, etc.
  · Includes memory with scale.

  2D CAD data available

  Starting from∗ ：	347.90 €
  Min. Shipping Days ：	20 Days

  *Unit price with basic configuration

• 

  Small X Type Rail

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An X type aluminum rail.
  · Slides using a dedicated carrier.
  · Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
  · Includes memory with scale.
  · Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws, and M4 screws, etc.
  · X type rails can be fixed and retained using rail stands or T type carriers.

  2D CAD data available

  Starting from∗ ：	148.06 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  X Type Rail Stand

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An X type aluminum rail.
  · Slides using a dedicated carrier.
  · Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
  · Includes memory with scale.
  · Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws and M4 screws, etc.
  · X type rails can be fixed and retained using rail stands or T type carriers.

  2D CAD data available

  Starting from∗ ：	236.73 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  Mini-Rail Carrier

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Rails with a cross-section of 20 mm × 10 mm. Used in the configuration of systems such as those for small optical parts and small equipment etc.
  · Use M6 screws to fix to surface plates etc.
  · There are two types of dedicated rail carrier available; large and small. Can be used with M6 and M2 screws, etc.

  2D CAD data available

  Starting from∗ ：	40.31 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  X Type Rail Carrier

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An X type aluminum rail.
  · Slides using a dedicated carrier.
  · Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
  · Includes memory with scale.
  · Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws, and M4 screws, etc.
  · X type rails can be fixed and retained using rail stands or T type carriers.

  2D CAD data available

  Starting from∗ ：	102.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tilting / Rotating Prism Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The IR-P1 tilting/rotating prism holder can be used with prisms up to 25 mm in size.
  · The IR-P1 tilting/rotating prism holder is a prism holder that features dual-axis tilt adjustment and single-axis rotation adjustment capabilities. It also features less protrusion from the main body than conventional types and can be used to install prisms without taking up space.

  Starting from∗ ：	339.41 €
  Min. Shipping Days ：	21 Days

  *Unit price with basic configuration

Loading...