HALDER Workpiece clamps (horizontal clamping direction)

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less

?* Information on days to ship and prices

Lateral Spring Plungers, with spring steel sheet

HALDER

To be used for positioning and applying pressure.

3D CAD data available

Starting from^∗ ：	16.47 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Sub-Part Clamp

HALDER

The sub-part clamp and the sub-part stop enable workpieces to be clamped on the front face. This allows the full area of the machine table to be used to clamp the workpiece.
- down-hold effect through an angled jaw face
- clamping of large workpieces on the whole of the machine table
- large clamping forces of up to 20 kN
- solid version made of vibration-eliminating ductile iron
- optimal adaption to the workpiece and material through the use of clamping inserts and interchangeable jaws
- force closure is possible with a fixed slot tenon EH 23110. in a T-slot
- minimum interference of clamping areas - even for large workpieces
- location holes at the sides for fastening of longitudinal stops if required

3D CAD data available

Starting from^∗ ：	335.24 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Taper Clamping Units

HALDER

Inserting the socket head screw moves the two clamping chucks outwards and presses the workpieces against a stop. Using the double taper, an additional vertical clamping force will be achieved. Stroke of taper clamping units with M 5 = ±0,5, M 8 = ±0,5, M 12 = ±1 and M 16 = ±1,5. Can be mounted in a threaded hole or with T-nuts for horizontal or vertical multiple clamping.

3D CAD data available

Starting from^∗ ：	44.20 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Push Plungers, with pin, protected against rotating

HALDER

The push plunger is suitable for easy and safe positioning of workpieces or components prior to clamping or assembly.
Locating pins of your own profile or design can be attached to our threaded pin types.

3D CAD data available

Starting from^∗ ：	27.31 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Double Edge Clamps

HALDER

Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop.

3D CAD data available

Starting from^∗ ：	28.77 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Double Edge Clamps, machinable chucks

HALDER

Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop.
The chucks can be machined to the needed workpiece contour. The locking plate is needed only for this machining, not for the workpiece clamping.

3D CAD data available

Starting from^∗ ：	62.58 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Locating Clamps

HALDER

Suitable for a simultaneous "positioning" and "clamping" of workpieces. The locating element is a precision element which can be assembled from either side. The clamping and locating part adapted to the workpiece is screwed to the cylindrical support. Clamping and locating parts are manufactured by the user according to the individual requirements.

3D CAD data available

Starting from^∗ ：	446.14 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stabilizing Clamping Jaws

HALDER

Due to the big clamping jaw, this clamping element is suitable for lateral clamping of high workpieces.
The clamping force acts forwards and downwards. Clamping plate is turnable, i.e. to the ground or ribbed side.

3D CAD data available

Starting from^∗ ：	331.07 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamping Vices / moveable jaw

HALDER

The clamping vice is a solid, compact clamping module with a horizontally acting clamping force and a robust mechanical spindle.
- clamping force up to max. 80 kN
- clamping stroke 25 mm via screw drive WS 36
- fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing 100 x 100 mm
- suitable clamping jaws 23231.0020 - .0033 are available

3D CAD data available

Starting from^∗ ：	1,277.99 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Standard Jaws, for vices

HALDER

[Specifications]
・Type: Side Push
・Material: Steel, Tool Steel
・Plunger: Heat-treated steel, induction hardened

3D CAD data available

Starting from^∗ ：	106.76 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Interchangeable Jaws, for vices, with pull-down effect

HALDER

The interchangeable jaws - held by 2 permanent magnets - can be inserted and exchanged with a manual handle.

3D CAD data available

Starting from^∗ ：	246.26 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Coverings, for taper clamping units

HALDER

Protects against damage from scales of wood and dirt.

Starting from^∗ ：	23.37 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Anti-Turn Locking Devices for Taper Clamping Units, for clamping bars

HALDER

Both versions prevent turning of the taper clamping unit on the clamping bar. The version "picture 2" additionally protects against damage from scales of wood and dirt.

Starting from^∗ ：	52.36 €
Min. Shipping Days ：	1 Day

*Unit price with basic configuration

Stop Plates for Taper Clamping Units, for clamping bars

HALDER

The stop plate is used when clamping only on one side of the taper clamping unit. One side of the taper clamping unit rests against the step of the stop plate and is thus fixed.

Starting from^∗ ：	154.40 €
Min. Shipping Days ：	1 Day

*Unit price with basic configuration

Stops

HALDER

With the stop a flexible stop for a workpiece can be realised.

Together with a grub screw (e.g. EH 22540.), a workpiece can be mounted and aligned.

The grub screw should be secured in position with a hexagon nut.

Suitable for clamping devices M 20 - M 24.

Starting from^∗ ：	225.38 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Max. Clamping Force(N)
Material
Type
Type
Applicable Tightening Force(N)
Stroke S(mm)
Attaching Portion Shape
Arm Height Type
Arm Height H(mm)
Arm Length Type
Arm Length L(mm)
Tip Bolt Type


Brand	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER
Product Series	Lateral Spring Plungers, with spring steel sheet	Sub-Part Clamp	Taper Clamping Units	Push Plungers, with pin, protected against rotating	Double Edge Clamps	Double Edge Clamps, machinable chucks	Locating Clamps	Stabilizing Clamping Jaws	Clamping Vices / moveable jaw	Standard Jaws, for vices	Interchangeable Jaws, for vices, with pull-down effect	Coverings, for taper clamping units	Anti-Turn Locking Devices for Taper Clamping Units, for clamping bars	Stop Plates for Taper Clamping Units, for clamping bars	Stops
CAD	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D
Starting from^∗	16.47 € *Unit price with basic configuration	335.24 € *Unit price with basic configuration	44.20 € *Unit price with basic configuration	27.31 € *Unit price with basic configuration	28.77 € *Unit price with basic configuration	62.58 € *Unit price with basic configuration	446.14 € *Unit price with basic configuration	331.07 € *Unit price with basic configuration	1,277.99 € *Unit price with basic configuration	106.76 € *Unit price with basic configuration	246.26 € *Unit price with basic configuration	23.37 € *Unit price with basic configuration	52.36 € *Unit price with basic configuration	154.40 € *Unit price with basic configuration	225.38 € *Unit price with basic configuration
Min. Shipping Days ：	Same day	3 Days	Same day	Same day	3 Days	3 Days	4 Days	4 Days	3 Days	3 Days	3 Days	2 Days	1 Day	1 Day	3 Days
Max. Clamping Force(N)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Material	Steel	Steel	Steel	Steel	Aluminum Alloy	Aluminum Alloy	Steel	Steel	Steel	Steel	Steel	-	Steel	Steel	Steel
Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Type	Side Push	Side Push	Side Push	Side Push	Side Push	Side Push	Side Push	Side Push	Side Push	Side Push	Side Push	-	-	-	-
Applicable Tightening Force(N)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Stroke S(mm)	1.5	-	-	6 ～ 10	-	-	-	-	-	-	-	-	-	-	65
Attaching Portion Shape	Flange Base	-	Straight Base	Straight Base	Straight Base	Straight Base	Straight Base	Straight Base	-	-	-	-	-	-	-
Arm Height Type	-	-	-	-	-	-	Standard	-	-	-	-	-	-	-	-
Arm Height H(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Arm Length Type	-	-	-	-	-	-	Standard	-	-	-	-	-	-	-	-
Arm Length L(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Bolt Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-