MAEDLER Bearing Lock Nuts / Shaft Nuts / Locknuts
Narrow search by specifying Type
-
-
-
Tooth Lock Washers -
Tool
?* Information on days to ship and prices
-
Locknuts GUK with Polyamide Insert, Self-locking, Stainless Steel
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.
Recommend tolerance for the shaft thread: 6g DIN ISO 965.
Temperature max. 100°C.- Volume Discount
Starting from∗ ： 3.23 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMT with Locking Pins
MAEDLER
Material: KMT: Steel.
Strength min. 350 N/mm2.
Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up to 0.005 mm. Slotnut-design. Up to size 15 with two additional wrench flats.- Volume Discount
Starting from∗ ： 21.47 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMK with Integral Locking Device
MAEDLER
Material: KMK: Steel.
Strength min. 350 N/mm2.
Reusable shaft nut with integrated locking device.
Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning.- Volume Discount
Starting from∗ ： 22.49 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts DIN 981, Steel
MAEDLER
Material: Steel.
Strength min. 350 N/mm2.
These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Starting from∗ ： 1.93 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Slotted Round Nuts DIN 1804, Type h
MAEDLER
Material: type h = steel, hardened with the exeption of the thread, faces ground.
At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.
From size M45x1.5, the nuts have 6 slots.- Volume Discount
Starting from∗ ： 5.36 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Lockwashers DIN 5406 for Locknuts DIN 981, Stainless Steel
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
Strength min. 350 N/mm2.
Safety plates for locknuts DIN 981.
A keyway is required on the shaft thread.- Volume Discount
Starting from∗ ： 2.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts UW with Locking Device, Steel
MAEDLER
Material: Steel.
Strength min. 350 N/mm2.
Locking insert: Stainless Steel.
With these slotted nuts no additional lock washers, keyways or washers are required. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965.- Volume Discount
Starting from∗ ： 13.59 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMV, Square Shape, with Locking Pins, Steel, Black Oxided
MAEDLER
Material: Steel, black oxided, contact surface ground.
Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.- Volume Discount
Starting from∗ ： 9.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMT-R with Locking Pins
MAEDLER
Material: KMT-R: Stainless steel 1.4301 (AISI 304).
Strength min. 350 N/mm2.
Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up to 0.005 mm. Slotnut-design. Up to size 15 with two additional wrench flats.- Volume Discount
Starting from∗ ： 24.60 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMTA with Locking Pins
MAEDLER
Material: Body of the nut steel, min. strength 350 N/mm2.
Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.- Volume Discount
Starting from∗ ： 39.50 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMMR, Single-Splitted, with Clamp Screw
MAEDLER
Material KMMR: Stainless steel 1.4301 (AISI 304).
Screw stainless steel A2-70.
Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Starting from∗ ： 13.08 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts DIN 981, Stainless Steel
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
Strength min. 350 N/mm2.
These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Starting from∗ ： 6.86 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Slotted Round Nuts DIN 1804, Type w
MAEDLER
Material: type w = steel, black oxide finish, unhardened, unground.
At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.
From size M45x1.5, the nuts have 6 slots.- Volume Discount
Starting from∗ ： 2.05 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Slotted Round Nuts DIN 1804, Type rf
MAEDLER
Material: type rf = stainless steel 1.4301 (AISI 304), unhardened, unground.
At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.
From size M45x1.5, the nuts have 6 slots.- Volume Discount
Starting from∗ ： 8.53 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts UW with Locking Device, Stainless Steel
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
Strength min. 350 N/mm2.
Locking insert: Stainless Steel.
With these slotted nuts no additional lock washers, keyways or washers are required. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965.- Volume Discount
Starting from∗ ： 56.43 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMK-R with Integral Locking Device
MAEDLER
Material: KMK-R: Stainless steel 1.4301 (AISI 304).
Strength min. 350 N/mm2.
Reusable shaft nut with integrated locking device.
Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning.- Volume Discount
Starting from∗ ： 29.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts DIN 70852, Steel, Zinc-plated
MAEDLER
Material: Steel, zinc-plated, hardness class 17 H.
These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread).
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Starting from∗ ： 2.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts DIN 70852, Steel
MAEDLER
Material: Steel, hardness class 17 H
These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread).
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Starting from∗ ： 2.38 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Internal Tab Washers DIN 462 for Slotted Round Nuts DIN 1804, Steel
MAEDLER
Material: Steel, bright.
Lockwashers (safety plates) for locknuts DIN 1804.
A keyway is required on the shaft thread.
After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut.- Volume Discount
Starting from∗ ： 0.99 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Lockwashers DIN 5406 for Locknuts DIN 981, Steel
MAEDLER
Material: Steel.
Strength min. 350 N/mm2.
Safety plates for locknuts DIN 981.
A keyway is required on the shaft thread.- Volume Discount
Starting from∗ ： 0.58 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Lockwashers DIN 5406 for Locknuts DIN 981, Steel, Zinc-plated
MAEDLER
Material: Steel, zinc-plated.
Strength min. 350 N/mm2.
Safety plates for locknuts DIN 981.
A keyway is required on the shaft thread.- Volume Discount
Starting from∗ ： 0.58 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMV, Square Shape, with Locking Pins, Steel, Nickel-plated
MAEDLER
Material: Steel, nickel-plated, contact surface ground.
Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.- Volume Discount
Starting from∗ ： 10.29 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMM, Single-Splitted, with Clamp Screw
MAEDLER
Material KMM:Steel, zinc-plated, hardness class 14 H.
Screw steel 12.9, zinc-plated.
Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Starting from∗ ： 7.36 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts GUK with Polyamide Insert, Self-locking, Steel, Zinc-plated
MAEDLER
Material: Steel, zinc-plated, hardness class 14 H.
These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.
Recommend tolerance for the shaft thread: 6g DIN ISO 965.
Temperature max. 100°C.- Volume Discount
Starting from∗ ： 1.28 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts DIN 981, Steel, Zinc-plated
MAEDLER
Material: Steel, zinc-plated.
Strength min. 350 N/mm2.
These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Starting from∗ ： 2.38 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts DIN 70852, Stainless Steel
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread).
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Starting from∗ ： 4.16 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Thread Nominal M |
| Shape |
| Material |
| Surface Treatment |
| Screw Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Locknuts GUK with Polyamide Insert, Self-locking, Stainless Steel | Locknuts KMV, Square Shape, with Locking Pins, Steel, Black Oxided | Internal Tab Washers DIN 462 for Slotted Round Nuts DIN 1804, Steel | Lockwashers DIN 5406 for Locknuts DIN 981, Steel, Zinc-plated | Locknuts KMV, Square Shape, with Locking Pins, Steel, Nickel-plated | Locknuts GUK with Polyamide Insert, Self-locking, Steel, Zinc-plated | ||||||||||||||||||||
| Starting from∗ | 3.23 € *Unit price with basic configuration Volume Discount | 21.47 € *Unit price with basic configuration Volume Discount | 22.49 € *Unit price with basic configuration Volume Discount | 1.93 € *Unit price with basic configuration Volume Discount | 5.36 € *Unit price with basic configuration Volume Discount | 2.88 € *Unit price with basic configuration Volume Discount | 13.59 € *Unit price with basic configuration Volume Discount | 9.88 € *Unit price with basic configuration Volume Discount | 24.60 € *Unit price with basic configuration Volume Discount | 39.50 € *Unit price with basic configuration Volume Discount | 13.08 € *Unit price with basic configuration Volume Discount | 6.86 € *Unit price with basic configuration Volume Discount | 2.05 € *Unit price with basic configuration Volume Discount | 8.53 € *Unit price with basic configuration Volume Discount | 56.43 € *Unit price with basic configuration Volume Discount | 29.96 € *Unit price with basic configuration Volume Discount | 2.88 € *Unit price with basic configuration Volume Discount | 2.38 € *Unit price with basic configuration Volume Discount | 0.99 € *Unit price with basic configuration Volume Discount | 0.58 € *Unit price with basic configuration Volume Discount | 0.58 € *Unit price with basic configuration Volume Discount | 10.29 € *Unit price with basic configuration Volume Discount | 7.36 € *Unit price with basic configuration Volume Discount | 1.28 € *Unit price with basic configuration Volume Discount | 2.38 € *Unit price with basic configuration Volume Discount | 4.16 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Type | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts | - | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts | Lock Nuts | - | - | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts | Lock Nuts | - | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts | Lock Nuts with Tooth Lock Washer | Lock Nuts | Lock Nuts |
| Thread Nominal M | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shape | - | - | - | - | Round Shape | - | - | - | - | - | - | - | Round Shape | Round Shape | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel |
| Surface Treatment | None | Black Oxide | None | None | Surface Treatment Provided | None | None | Black Oxide | None | Black Oxide | None | None | Black Oxide | None | None | None | Zinc Plating | None | None | None | Zinc Plating | Surface Treatment Provided | Zinc Plating | Zinc Plating | Zinc Plating | None |
| Screw Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Thread Nominal M
- 0.391"x32F
- 0.469"x32F
- 0.586"x32F
- 0.664"x32F
- 0.781"x32F
- 0.969"x32F
- 1/2
- 1.173"x18F
- 1.376"x18F
- 1.563"x18F
- 1.767"x18F
- 1.967"x18F
- 1.967x18F"
- 2.157"x18F
- 2.157x18F"
- 2.360"x18F
- 2.360x18F"
- 2.548"x18F
- 2.548x18F"
- 2.751"x18F
- 2.751x18F"
- 2.933"x12F
- 2.933x12F"
- M3x0.35
- M3x0.5
- 3/8
- 3.137"x12F
- 3.137x12F"
- 3.340"x12F
- 3.340x12F"
- 3.527"x12F
- 3.527x12F"
- 3.730"x12F
- 3.730x12F"
- 3.918"x12F
- 3.918x12F"
- M4x0.5
- M4x0.7
- 4.122"x12F
- 4.122x12F"
- 4.325"x12F
- 4.325x12F"
- 4.716"x12F
- 4.716x12F"
- M5x0.5
- M5x0.8
- 5.106"x12F
- 5.106x12F"
- 5.497"x12F
- 5.497x12F"
- 5.888"x12F
- 5.888x12F"
- 6
- M6
- M6X0,5
- M6x0.75
- M6x1
- 6.284"x8F
- 6.284x8F"
- 6.659"x8F
- 6.659x8F"
- 7.066"x8F
- 7.066x8F"
- 7.472"x8F
- 7.472x8F"
- 7.847"x8F
- 7.847x8F"
- M8
- M8X0,75
- M8x0.75
- M8x1.0
- M 8 x 1
- M8x1.25
- 8.628"x8F
- 8.628x8F"
- 9.442"x6F
- 9.442x6F"
- M10
- M10x0,75
- M 10 x 0,75
- 10 x 0.75
- M10 x 0.75
- M10X0.75
- M10x0.75
- M 10x0.75
- M10X1
- M10x1
- M 10 x 1
- M10x1.5
- 10.192"x6F
- 10.192x6F"
- 11.004"x6F
- 11.004x6F"
- 11.785"x6F
- 11.785x6F"
- M12
- 12 x 1
- M12X1.0
- M12X1
- M12x1
- M 12 x 1
- M 12x1
- M 12 x 1,5
- M12x1.75
- 12.562"x6F
- 12.562x6F"
- 13.339x5F"
- M 14 x 1,5
- 14.170x5F"
- 14.957x5F"
- M15
- 15 x 1
- M15 x 1
- M15X1.0
- M15X1
- M15x1
- M15×1.00
- M 15 x 1
- M 15x1
- 15.745x5F"
- M16
- M 16 x 1,5
- M16x2
- 16.532x5F"
- M17
- 17 x 1
- M17X1.0
- M17X1
- M17x1
- M 17 x 1
- M 17x1
- 17.319x5F"
- 18
- M 18 x 1,5
- 18.107x5F"
- 18.894x5F"
- 19.682x5F"
- M20
- 20 x 1
- M20X1.0
- M20X1
- M20x1
- M20×1.00
- M 20 x 1
- M 20x1
- M 20 x 1,5
- M20x2.5
- 20.867x4F"
- M 22 x 1,5
- 22.048x4F"
- 23.623x4F"
- M24
- M 24 x 1,5
- M24x3
- 24.804x4F"
- M25
- M25X1,5
- M25x1,5
- M 25 x 1,5
- 25 x 1.5
- M25X1.5
- M25x1.5
- M25×1.50
- M 25x1.5
- M 26 x 1,5
- 26.379x4F"
- 27.961x3F"
- M 28 x 1,5
- 29.536x3F"
- M30
- M30X1,5
- M30x1,5
- M 30 x 1,5
- 30 x 1.5
- M30X1.5
- M30x1.5
- M 30x1.5
- M30x3.5
- 31.504x3F"
- M 32 x 1,5
- 33.473x3F"
- M35
- M35X1,5
- M35x1,5
- M 35 x 1,5
- 35 x 1.5
- M35 x 1.5
- M35X1.5
- M35x1.5
- M 35x1.5
- 35.441x3F"
- 37.410x3F"
- M 38 x 1,5
- M40
- M40X1,5
- M40x1,5
- M 40 x 1,5
- 40 x 1.5
- M40X1.5
- M40x1.5
- M 40x1.5
- M 42 x 1,5
- M45
- M45X1,5
- M45x1,5
- M 45 x 1,5
- 45 x 1.5
- M45X1.5
- M45x1.5
- M 45x1.5
- M 48 x 1,5
- M50
- M50X1,5
- M50x1,5
- M 50 x 1,5
- 50 x 1.5
- M50X1.5
- M50x1.5
- M 50x1.5
- M 52 x 1,5
- M55
- M 55 x 1,5
- M55x1.5
- M 55x1.5
- 55 x 2
- M55X2
- M55X2.0
- M55x2
- M55x2.0
- M 55 x 2
- M 55x2
- M 58 x 1,5
- M60
- M 60 x 1,5
- M60x1.5
- M 60x1.5
- 60 x 2
- M60X2
- M60X2.0
- M60x2
- M60x2.0
- M 60 x 2
- M 60x2
- M65
- M65x1.5
- M 65x1.5
- 65 x 2
- M65X2
- M65X2.0
- M65x2
- M 65x2
- M70
- M70x1.5
- M 70x1.5
- 70 x 2
- M70X2
- M70X2.0
- M70x2
- M 70x2
- M75
- M75x1,5
- M 75x1.5
- 75 x 2
- M75X2
- M75X2.0
- M75x2
- M 75x2
- M80
- 80 x 2
- M80X2
- M80X2.0
- M80x2
- M 80x2
- M85
- 85 x 2
- M85X2
- M85x2
- M 85x2
- M90
- 90 x 2
- M90X2
- M90X2.0
- M90x2
- M 90x2
- 94.742 mm
- M95
- 95 x 2
- M95X2.0
- M95x2
- M 95x2
- 99.517 mm
- M100
- 100 x 2
- M100X2
- M100X2.0
- M100x2
- M 100x2
- M105
- M105X2
- M105X2.0
- M105x2
- M110
- 110 x 2
- M110X2
- M110X2.0
- M110x2
- M 110x2
- M115
- 115 x 2
- M115X2
- M115X2.0
- M115x2
- 119.786 mm
- M120
- 120 x 2
- M120X2
- M120X2.0
- M120x2
- M 120x2
- M125
- 125 x 2
- M125X2
- M125X2.0
- M125x2
- 130 x 2
- M130X2
- M130X2.0
- M130x2
- M 130x2
- M130x3
- M 130x3
- M135
- 135 x 2
- M135X2.0
- M135x2
- 139.642 mm
- M140
- 140 x 2
- M140X2
- M140X2.0
- M140x2
- M 140x2
- M140x3
- M 140x3
- M145
- 145 x 2
- M145X2.0
- M145x2
- M150
- 150 x 2
- M150X2
- M150X2.0
- M150x2
- M 150x2
- M150x3
- M 150x3
- 155 x 3
- M155x3
- M160
- 160 x 3
- M160x3
- M 160x3
- M165x3
- 169.139 mm
- 170 x 3
- M170x3
- M 170x3
- 179.476 mm
- M180x3
- M 180x3
- 189.789 mm
- M190
- M190x3
- M 190x3
- 199.314 mm
- M200
- M200x3
- M 200x3
- TM205x4
- Tr205x4
- Tr 205x4
- Tr210x4
- Tr 210x4
- Tr215x4
- Tr 215x4
- TM220x4
- Tr220x4
- Tr 220x4
- Tr225x4
- Tr 225x4
- Tr230x4
- Tr 230x4
- TM235x4
- Tr235x4
- Tr 235x4
- 239.827 mm
- TM240x4
- Tr240x4
- Tr 240x4
- Tr250x4
- Tr 250x4
- TM260x4
- Tr260x4
- Tr 260x4
- Tr270x4
- Tr 270x4
- Tr275x4
- TM280x4
- Tr280x4
- Tr 280x4
- Tr290x4
- Tr 290x4
- Tr295x4
- TM300x4
- Tr300x4
- Tr 300x4
- Tr310x5
- Tr 310x5
- Tr315x5
- 319.075 mm
- TM320x5
- Tr320x5
- Tr 320x5
- TM330x5
- Tr330x5
- Tr 330x5
- Tr335x5
- TM340x5
- Tr340x5
- Tr 340x5
- Tr345x5
- Tr 345x5
- Tr350x5
- Tr 350x5
- Tr355x5
- TM360x5
- Tr360x5
- Tr 360x5
- TM365x5
- Tr365x5
- Tr 365x5
- Tr370x5
- Tr 370x5
- Tr375x5
- TM380x5
- Tr380x5
- Tr 380x5
- Tr385x5
- Tr 385x5
- Tr395x5
- Tr400x5
- Tr 400x5
- Tr410x5
- Tr 410x5
- Tr415x5
- TM420x5
- Tr420x5
- Tr 420x5
- Tr430x5
- Tr 430x5
- Tr435x5
- Tr440x5
- Tr 440x5
- Tr450x5
- Tr 450x5
- Tr460x5
- Tr 460x5
- Tr470x5
- Tr 470x5
- Tr480x5
- Tr 480x5
- Tr490x5
- Tr 490x5
- Tr500x5
- Tr510x6
- Tr520x6
- Tr530x6
- Tr540x6
- Tr550x6
- Tr560x6
- 560.019 mm
- Tr570x6
- Tr580x6
- Tr590x6
- Tr600x6
- 600.024 mm
- Tr610x6
- Tr625x6
- Tr630x6
- 630.022 mm
- Tr650x6
- Tr655x6
- Tr670x6
- 670.027 mm
- Tr680x6
- Tr690x6
- Tr695x6
- Tr710x7
- 710.209 mm
- Tr720x7
- Tr740x7
- Tr750x7
- 750.214 mm
- Tr760x7
- Tr775x7
- Tr780x7
- Tr800x7
- 800.202 mm
- Tr830x7
- Tr850x7
- 850.214 mm
- Tr880x7
- Tr900x7
- 900.201 mm
- Tr930x8
- Tr950x8
- 950.214 mm
- Tr980x8
- Tr1000x8
- Tr1035x8
- Tr1060x8
- Tr1095x8
- Tr1120x8
- Tr1155x8
- Tr1180x8
- Tr1215x8
-
Shape
-
Round Shape
-
Square
-
Hex
-
Round Shape
-
Material
-
Surface Treatment
- None
- Phosphate Coating
- Black Oxide
- Zinc Plating
- Surface Treatment Provided
- No Surface Treatment
-
Screw Type
Narrow search by specifying Brand
-
- MISUMI (7)
- MAEDLER (26)
- SKF (21)
- BGL (18)
- FAG (14)
- FUJI SEIMITSU (7)
- YOKOTA KIKOU (7)
- SUNCO (6)
- GANTER (5)
- INA (5)
- AMF (3)
- ZEN (2)
- NKE BEARINGS (2)
- NTN (2)
- REYHER (1)
- SNR (1)
- EVER-ON CORPORATION (1)
- HARDLOCK INDUSTRY (1)
- HALDER (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
Categories related to Bearing Lock Nuts / Shaft Nuts / Locknuts
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.