SANKYO DIAMOND INDUSTRIAL Diamond Cutters
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Rakuraku Cut-Kun Cutting Wheel
SANKYO DIAMOND INDUSTRIAL
[Features]
Can be used for cutting tiles and roof tiles.
[Features]
It is an edge type that allows a clean end to the cut.- Volume Discount
Starting from∗ ： 65.16 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Small Cutter With Shaft For Tile Cutting
SANKYO DIAMOND INDUSTRIAL
[Features]
· A small-diameter cutter for minimal damage to the tile when cutting. Has an outstanding turning circle for small turns.
[Applications]
· For cutting tile seams.
[SMAT-H compatible models]
· HITACHI KOKI: 100 mm disk grinders, all models
· RYOBI: G Series / RG Series
[SMAT-M compatible models]
· MAKITA: 9533 Series / GA403 Series
· BOSCH: GWS Series / PWS Series- Volume Discount
Starting from∗ ： 69.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Small Cutter
SANKYO DIAMOND INDUSTRIAL
For cutting tiles.
[Features]
· Flat blade edge for cutting section focus.
· Also ideal for wet tile cutting.
· Rim type for clean finishing of cut sections.- Volume Discount
Starting from∗ ： 69.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Dry Cup (for Building Materials)
SANKYO DIAMOND INDUSTRIAL
Grinding concrete, bricks, blocks, and stone materials. Best suited for rough surface grinding of concrete and stone.- Volume Discount
Starting from∗ ： 88.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Dry Shaper (for Building Materials)
SANKYO DIAMOND INDUSTRIAL
Grinding of concrete, brick, block and stone. Biting into stones and concrete is prevented with resin embedding. Ideal for finishing and flat grinding.- Volume Discount
Starting from∗ ： 130.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Dry Saver (for Stone)
SANKYO DIAMOND INDUSTRIAL
Grinding concrete, bricks, blocks, and stone materials. The embedded resin suppresses any biting into concrete or stone materials. Ideal for finishing and flat grinding.- Volume Discount
Starting from∗ ： 200.65 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Dry Surfacer
SANKYO DIAMOND INDUSTRIAL
Grinding concrete, bricks, blocks, and stone materials. For cutting both concrete and stone. 3 times longer life. Cross-shaped tip increases grinding power and also improves durability.- Volume Discount
Starting from∗ ： 135.79 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Dry Surfacer Ace
SANKYO DIAMOND INDUSTRIAL
Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
[Features]
· Workability is improved with surfacer sharpness intact.
· Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
· Lighter main unit: Main unit is lightweight while still maintaining substrate strength. Weight reduced by 13%.
· Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.- Volume Discount
Starting from∗ ： 128.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Dry Surfacer Ace DX
SANKYO DIAMOND INDUSTRIAL
Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
[Features]
· It has an improved lifetime.
· Grinding of granite also has distinctively sharp performance.
· Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
· Lighter main unit: Main unit has been made lighter while still maintaining substrate strength. Weight reduced by 13%.
· Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.- Volume Discount
Starting from∗ ： 125.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Dry Surfacer Ace Light
SANKYO DIAMOND INDUSTRIAL
Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
[Features]
· Suitable for minor work. Affordable pricing.
· Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
· Lighter main unit: Main unit has been made lighter while still maintaining substrate strength. Weight reduced by 13%.
· Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.- Volume Discount
Starting from∗ ： 81.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Concrete Cutting GH950 358X30.
SANKYO DIAMOND INDUSTRIAL
Cuts rebar reinforced concrete, resin concrete and high-strength concrete. Laser turbo blade that boasts a superb cutting edge. A diamond tip was designed and developed for cutting electrical poles (with steel bars).- Volume Discount
Starting from∗ ： 646.68 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
R Cutter
SANKYO DIAMOND INDUSTRIAL
Used for cutting interlocking blocks, concrete, bricks, and blocks. Revolutionary Round-cutting Diamond Cutter- Volume Discount
Starting from∗ ： 188.49 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Sharp Cut (M Green)
SANKYO DIAMOND INDUSTRIAL
[Features]
-The cutter is easy to use to cut a variety of tiles and is an edge cutter that delivers a clean cut.- Volume Discount
Starting from∗ ： 63.49 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Inazuma LJ 305 mm X30.5
SANKYO DIAMOND INDUSTRIAL
Cutting of blocks and secondary concrete products. Razor blade with emphasis on cutting feel used for standard type for both engine cutter and electric cutters.- Volume Discount
Starting from∗ ： 149.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Craftsmanship, RIM
SANKYO DIAMOND INDUSTRIAL
For cutting concrete and blocks. A standard masterpiece, which is the pride of Sankyo Diamond. Rim type standard product that finishes cut cleanly- Volume Discount
Starting from∗ ： 83.43 € Min. Shipping Days ： 13 Days *Unit price with basic configuration
-
Craftsmanship (Segment)
SANKYO DIAMOND INDUSTRIAL
For cutting concrete and blocks. A standard masterpiece, which is the pride of Sankyo Diamond. Segmented type standard product with emphasis on sharpness- Volume Discount
Starting from∗ ： 80.95 € Min. Shipping Days ： 16 Days *Unit price with basic configuration
-
Craftsmanship RIM (Flange)
SANKYO DIAMOND INDUSTRIAL
For cutting concrete and blocks. Ideal for cutting edges. You can cut even right-angle sections nice and straight without interference from the locknut.- Volume Discount
Starting from∗ ： 109.31 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Block Craftsman
SANKYO DIAMOND INDUSTRIAL
Cutting block, red brick, and concrete. Economy type that is convenient for simple cutting. Good finish with blocks, mortar, red bricks and concrete. Amazing long life.- Volume Discount
Starting from∗ ： 28.93 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SD Protect Mark II
SANKYO DIAMOND INDUSTRIAL
For cutting concrete products in general, reinforced concrete, tiles, bricks, blocks, mortar, ALC. Medium aperture blade for the famous SD cutters- Volume Discount
Starting from∗ ： 303.00 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Pro Tile Cutter
SANKYO DIAMOND INDUSTRIAL
Roofing tile cutting. Thin blade for quick cutting of hard tiles. Excellent sharpness with 1.3 mm thick blade. A rim type that produces a clean cut.- Volume Discount
Starting from∗ ： 67.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 74.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tile Pro DX
SANKYO DIAMOND INDUSTRIAL
Cutting porcelain tiles, ceramic tiles, and hardened tiles. Can be selected according to the sharpness. Less chipping and beautifully cut surface. Blade thickness 1.0 mm: Cutting speed is 20% improved compared to conventional products.- Volume Discount
Starting from∗ ： 81.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SD Segment
SANKYO DIAMOND INDUSTRIAL
Best-selling SD cutter evolving from the segment type. It emphasizes tool life. With emphasis on safety.
[Features]
· Waveform substrate: Prevents heat buildup in substrate, ensuring stable cutting performance.
· 4 Tips: Takes the strong points of both rimmed and segmented types to provide sharper cutting performance and a cleaner finish.
· Diamond layer [8 mm] improves service life.
· Cracking is prevented with oval key hole and chamfering.
· Features a rounded chip to prevent chip splintering.- Volume Discount
Starting from∗ ： 102.38 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
SD Cutter 8X
SANKYO DIAMOND INDUSTRIAL
The evolved SD Cutter type has a diamond layer that has been increased 8 fold. Diamond Cutter Recognized by Work Site Professionals
[Features]
· It has prioritized sharpness. SD Cutter: An evolved SD Cutter Type in which the diamond layer has been increased 8 fold.
· Waveform substrate provides cooling effect, improving cutting performance and extending life.
· Super Long Selling Item An iconic model of the diamond cutter recognized by all work site professionals.
· Superior product usable in wide applications with cutting performance and durability.- Volume Discount
Starting from∗ ： 86.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cutting Master
SANKYO DIAMOND INDUSTRIAL
Excellent sharpness. Short chip turbo segment with excellent sharpness. Diagonal slits: The ejection effect on cutting chips prevents heat accumulation, and the cutting ability is maintained. Short tip: Radiates heat and reduces substrate runout. Improved safety. Rounded edge: The chip angle is rounded to prevent chip splintering and improve safety.- Volume Discount
Starting from∗ ： 95.72 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Laser S1 Cutter 105
SANKYO DIAMOND INDUSTRIAL
[Features]
· Has the highest cutting speed level in the industry.
· Hardened board: Board has been heat treated to increase board strength.
· New wave substrate: Increased rigidity with wave shape of quenched substrate.
· Laser welding: Improves the strength of the joints by laser welding chips and circuit boards.
· High strength glue: Adopts a newly developed glue to have a strong tip even if the blade is thin.
· Turbo-tip: The area of contact with the workpiece is small, cutting resistance is suppressed, and sharpness is improved. The sharpness of the blade is maintained stably by preventing the diamond layer from overheating and by clearing the cut chips.
· Diagonal slits: The ejection effect on cutting chips prevents heat accumulation in the diamond layer, and the cutting ability is maintained stably.- Volume Discount
Starting from∗ ： 99.93 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Laser S1 Cutter 125
SANKYO DIAMOND INDUSTRIAL
[Features]
· Has the highest cutting speed level in the industry.
· Hardened board: Board has been heat treated to increase board strength.
· New wave substrate: Increased rigidity with wave shape of quenched substrate.
· Laser welding: Improves the strength of the joints by laser welding chips and circuit boards.
· High strength glue: Adopts a newly developed glue to have a strong tip even if the blade is thin.
· Turbo-tip: The area of contact with the workpiece is small, cutting resistance is suppressed, and sharpness is improved. The sharpness of the blade is maintained stably by preventing the diamond layer from overheating and by clearing the cut chips.
· Diagonal slits: The ejection effect on cutting chips prevents heat accumulation in the diamond layer, and the cutting ability is maintained stably.- Volume Discount
Starting from∗ ： 103.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sankyo Laser Turbo 8X
SANKYO DIAMOND INDUSTRIAL
Ideal for cutting concrete and granite. Highly safe. Laser welding: Improves the strength by laser welding chips and circuit boards. Hardened board: Adopts a heat treated board for increased board strength. Enhanced sharpness. Can cut granite: High durability for cutting granite thanks to high-strength bonding and laser welding.- Volume Discount
Starting from∗ ： 102.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Diamond Cutter Hero
SANKYO DIAMOND INDUSTRIAL
Dual cutter for cutting concrete and granite. Excellent sharpness. With diagonal slits, the ejection effect on cutting chips prevents heat accumulation, and the cutting ability is maintained.
[Features]
· Ideal for cutting concrete and granite.
· Excellent sharpness. Diagonal slits: The ejection effect on cutting chips prevents heat accumulation, and the cutting ability is maintained.
· Short tip: Radiates heat and reduces substrate runout.
· Diamond layer: Deepening the slit grooves on the diamond layer improves chip discharge performance is and enhances sharpness.
· Improved safety.
· Rounded edge: The chip angle is rounded to prevent chip splintering and improve safety.- Volume Discount
Starting from∗ ： 142.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Diamond Cutter Master Swordsman
SANKYO DIAMOND INDUSTRIAL
Dual cutter for cutting concrete and granite. Achieves a clean surface finish. Minimal resistance with the material being cut, achieving a clean finish. Can also be used with air tools. With emphasis on safety. Little resistance against the base plate during cutting and thus safe. Excellent sharpness. Unevenly distributed grooves in the diamond layer are used. Reduces substrate vibration and enhances sharpness.- Volume Discount
Starting from∗ ： 79.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Dry Cutter
SANKYO DIAMOND INDUSTRIAL
Repairing cracks in concrete and mortar, cutting pilot grooves for caulking injection- Volume Discount
Starting from∗ ： 171.78 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Blue Inazuma EH
SANKYO DIAMOND INDUSTRIAL
Cuts rebar reinforced concrete and concrete secondary products (fume pipes, U grooves). Excellent cutting quality even with the laser turbo type low torque developed only for electric motor type equipment.- Volume Discount
Starting from∗ ： 247.45 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Red Inazuma
SANKYO DIAMOND INDUSTRIAL
Cuts rebar reinforced concrete and concrete secondary products (fume pipes, U grooves). Can cut under conditions most ideal for the engine model. Laser turbo type.- Volume Discount
Starting from∗ ： 339.14 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 110.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chip Welding V Cutter
SANKYO DIAMOND INDUSTRIAL
For the repairing of cracks on concrete, mortar and the like, and lower grooving for coking injection. The welding manufacturing method makes the processing speed is 1.5 times that of conventional products. Groove shape does not collapse until the end. Cut end is finished beautifully with the low vibration.- Volume Discount
Starting from∗ ： 110.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
U Cut
SANKYO DIAMOND INDUSTRIAL
Repairing cracks in concrete and mortar, cutting pilot grooves for caulking injection- Volume Discount
Starting from∗ ： 263.88 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Spat
SANKYO DIAMOND INDUSTRIAL
Marble/FRP cutting. Ideal for cutting marble. Adopts a hob type blade that enables rapid cutting.- Volume Discount
Starting from∗ ： 123.93 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Red Inazuma GL
SANKYO DIAMOND INDUSTRIAL
Cutting of blocks and secondary concrete products. Razor blade for standard engine cutter. Long life design.- Volume Discount
Starting from∗ ： 160.23 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Red Inazuma GX
SANKYO DIAMOND INDUSTRIAL
Cutting of blocks and secondary concrete products. Razor blade for standard engine cutter. Long life design.
[Features]
· Can cut under conditions most ideal for the engine model.
· Laser Turbo Type- Volume Discount
Starting from∗ ： 247.45 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Japan Pro
SANKYO DIAMOND INDUSTRIAL
[Features]
It can be used for both asphalt and concrete, and can be used for cutting paved roads.
[Features]
A segment type that emphasises sharpness.- Volume Discount
Starting from∗ ： 221.97 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Road Blade JAPAN
SANKYO DIAMOND INDUSTRIAL
[Features]
It can be used for both asphalt and concrete, and can be used to cut paved roads.
[Features]
A segment type that emphasises sharpness.Starting from∗ ： 221.97 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Road Blade JAPAN DX
SANKYO DIAMOND INDUSTRIAL
Pavement cutting, AR-A / for asphalt, SR-AC / for dual-use cutting of concrete and asphalt, SR-C / for concrete. Dedicated road cutter blade- Volume Discount
Starting from∗ ： 252.10 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Road Blade
SANKYO DIAMOND INDUSTRIAL
Pavement cutting, AR-A / for asphalt, SR-AC / for dual-use cutting of concrete and asphalt, SR-C / for concrete. Dedicated road cutter blade- Volume Discount
Starting from∗ ： 347.80 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
PVC Cut Ace (Screwing)
SANKYO DIAMOND INDUSTRIAL
Cutting PVC pipes. PVC pipe cutting + With a screw flange for which direct mounting to Disk grinder is possible- Volume Discount
Starting from∗ ： 64.86 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
RZ Protect MARK2
SANKYO DIAMOND INDUSTRIAL
Cuts rebar reinforced (10 mm bars) concrete, concrete and blocks. Runs straight. Perfect sharpness. Increased cutting performance and service life. Protect chip: Prevents wear on the substrate by extending the side chip. (Protector)- Volume Discount
Starting from∗ ： 65.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
| Wheel Type |
| Specifications |
| Application |
| Outer Diameter(mm) |
| Blade thickness(mm) |
| Hole Diameter(mm) |
| Tip Height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 65.16 € *Unit price with basic configuration Volume Discount | 69.39 € *Unit price with basic configuration Volume Discount | 69.64 € *Unit price with basic configuration Volume Discount | 88.80 € *Unit price with basic configuration Volume Discount | 130.95 € *Unit price with basic configuration Volume Discount | 200.65 € *Unit price with basic configuration Volume Discount | 135.79 € *Unit price with basic configuration Volume Discount | 128.06 € *Unit price with basic configuration Volume Discount | 125.80 € *Unit price with basic configuration Volume Discount | 81.26 € *Unit price with basic configuration Volume Discount | 646.68 € *Unit price with basic configuration Volume Discount | 188.49 € *Unit price with basic configuration Volume Discount | 63.49 € *Unit price with basic configuration Volume Discount | 149.80 € *Unit price with basic configuration Volume Discount | 83.43 € *Unit price with basic configuration Volume Discount | 80.95 € *Unit price with basic configuration Volume Discount | 109.31 € *Unit price with basic configuration Volume Discount | 28.93 € *Unit price with basic configuration Volume Discount | 303.00 € *Unit price with basic configuration Volume Discount | 67.09 € *Unit price with basic configuration Volume Discount | 74.95 € *Unit price with basic configuration Volume Discount | 81.19 € *Unit price with basic configuration Volume Discount | 102.38 € *Unit price with basic configuration Volume Discount | 86.19 € *Unit price with basic configuration Volume Discount | 95.72 € *Unit price with basic configuration Volume Discount | 99.93 € *Unit price with basic configuration Volume Discount | 103.29 € *Unit price with basic configuration Volume Discount | 102.52 € *Unit price with basic configuration Volume Discount | 142.20 € *Unit price with basic configuration Volume Discount | 79.12 € *Unit price with basic configuration Volume Discount | 171.78 € *Unit price with basic configuration Volume Discount | 247.45 € *Unit price with basic configuration Volume Discount | 339.14 € *Unit price with basic configuration Volume Discount | 110.33 € *Unit price with basic configuration Volume Discount | 110.33 € *Unit price with basic configuration Volume Discount | 263.88 € *Unit price with basic configuration Volume Discount | 123.93 € *Unit price with basic configuration Volume Discount | 160.23 € *Unit price with basic configuration Volume Discount | 247.45 € *Unit price with basic configuration Volume Discount | 221.97 € *Unit price with basic configuration Volume Discount | 221.97 € *Unit price with basic configuration | 252.10 € *Unit price with basic configuration Volume Discount | 347.80 € *Unit price with basic configuration Volume Discount | 64.86 € *Unit price with basic configuration Volume Discount | 65.03 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 12 Days | 6 Days | 6 Days | 6 Days | 6 Days | 11 Days | 12 Days | 6 Days | 6 Days | 6 Days | 8 Days | 14 Days | 6 Days | 8 Days | 13 Days | 16 Days | 8 Days | 6 Days | 12 Days | 6 Days | 6 Days | 6 Days | 9 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 14 Days | 7 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 8 Days | 8 Days | 14 Days | 9 Days | 14 Days | 14 Days | 9 Days | 5 Days |
| Product Type | Diamond cutter | - | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Polyvinyl chloride tube internal surface cutter | Diamond cutter |
| Wheel Type | - | Rim Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rim Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Specifications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Application | Tile | Tile | Tile | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Tile | For concrete, mortar / Tile | For concrete, mortar / Tile | For concrete, mortar | For concrete, mortar / Tile | Tile | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar / Tile | For concrete, mortar / Tile | Tile | Tile | Tile | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar / Stone Material | For concrete, mortar / Stone Material | For concrete, mortar / Stone Material | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar | Stone Material | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar | Non-ferrous | For concrete, mortar |
| Outer Diameter(mm) | 103 | 54 | 75 ～ 150 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 358 | 125 | 100 ～ 204 | 305 | 150 ～ 180 | 150 | 125 | 105 | 305 | 105 | 105 | 105 ～ 125 | 105 | 105 ～ 203 | 105 | 105 | 125 | 125 ～ 203 | 203 | 105 ～ 180 | 100 ～ 105 | 311 | 354 | 85 | 85 | 100 | 100 | 305 | 307 | 250 ～ 400 | 305 | 322 | 372 | 100 | 105 ～ 204 |
| Blade thickness(mm) | 1.4 | 1.2 | 1.4 | 7 | 6 | 6 | 6 | 6 | 6 | 6 | 3.2 | 4 | 1.4 ～ 1.6 | 2.5 | 2 ～ 2.2 | 2 | 2 | 2 | 3 | 1.3 | 0.9 | 1 | 2.4 | 2.2 ～ 2.4 | 2.1 | 1.5 | 1.7 | 2 ～ 2.3 | 2.1 | 1.9 ～ 2.1 | 4.5 ～ 10 | 2.6 | 3 | 10 | 10 | 10 | 1.6 | 2.8 | 2.8 | 3 ～ 3.5 | 3 | 3 | 3.2 | 0.8 | 1.8 ～ 2.2 |
| Hole Diameter(mm) | 20 | M10 | 20 ～ 22 | 20 | M10 | M10 | 20 | M10 | M10 | M10 | 30.5 | 22 | 20 ～ 25.4 | 20 | 22 ～ 25.4 | 22 | M10 | 20 | 25.4 | 20 | 20 | 20 ～ 22 | 20 | 20 ～ 25.4 | 20 | 20 | 22 | 22 ～ 25.4 | 25.4 | 20 ～ 25.4 | 20 | 22 ～ 25.4 | 20 ～ 30.5 | 20 | 20 | 20 | 20 | 30.5 | 20 ～ 30.5 | 27 | 27 | 27 | 27 | M10 | 20 ～ 25.4 |
| Tip Height(mm) | 5 | 4 | 4 ～ 5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 8 | 6 | 5 | 6 | 6 | 6 | 6 | 6 | 8 | 5 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 4.5 ～ 7 | 8 | 6 | - | - | - | 2 | 6 | 6 | 7 | 7 | 7 | 7 | 15 | 6 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Type
-
Wheel Type
-
Specifications
-
Application
-
Outer Diameter(mm)
-
Blade thickness(mm)
-
Hole Diameter(mm)
-
Tip Height(mm)
Narrow search by specifying Brand
-
- SANKYO DIAMOND INDUSTRIAL (59)
- NORITAKE (31)
- LOBTEX (25)
- RIKEN DIAMOND INDUSTRY (12)
- RESITON (8)
- IWOOD (7)
- SAINT-GOBAIN (7)
- MOTOYUKI (6)
- ASAHI DIAMOND INDUSTRIAL (5)
- EARTH MAN (5)
- TSUBOMAN (4)
- TAKEKAWA (3)
- GOEI (3)
- TRUSCO NAKAYAMA (2)
- ARC GREATTOOL (1)
- DREMEL (1)
- WAKITA (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Diamond Cutters
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.