SMC Single Axis Robots
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Electric Actuator Rod Type LEY Series Step Motor/Servo Motor
SMC
[Features]
·Supports long strokes: MAX. 500 mm
·Direct mounting 3 directions, metal fitting mounting 3 types
·Auto switch can be installed
·Speed control / positioning: Up to 64 points
·Pressing control can be switched
Can be held with the rod pressed against the work, etc.- 2D / 3D CAD data available
Starting from∗ ： 595.53 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Electric Actuator Slider Type Ball Screw Drive LEFS Series Step Motor/Servo Motor
SMC
[Features]
·Easy to install the main body / reduce installation man-hours
The main body can be installed without removing exterior parts such as covers.
·Table position can be detected by auto switch
·Up to 4 locations can be attached to both sides of the body
·Ball screw drive- 2D / 3D CAD data available
Starting from∗ ： 988.33 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Electric actuator rod type motorless specification LEY series
SMC
It can be combined with your familiar motors and drivers.- 2D / 3D CAD data available
Starting from∗ ： 475.09 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Electric actuator rod type LEY series AC servo motor LECS□
SMC
[Features]
·High-Power Motor (100W/200W)
·Improved high-speed transport capacity
·Supports high acceleration / deceleration (5,000 mm/s2)
·Equipped with absolute encoder- 2D / 3D CAD data available
Starting from∗ ： 1,000.57 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Step motor driver LECPA series
SMC
[Features]
·A driver that can be positioned at any position by a pulse train signal
The electric actuator can be controlled from the positioning unit provided by the customer.
·Supports home return instruction signal
·With thrust limit functionStarting from∗ ： 5.73 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Step motor controller JXCE1, 91, P1, D1, L1 series
SMC
[Features]
·Supports two types of operation instruction methods
Step number instruction operation, numerical instruction operation
·Communication cable crossover wiring is possible
·Numerical monitor supportStarting from∗ ： 5.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Electric actuator rod type with guide motorless specification LEYG series
SMC
[Features] It can be combined with your familiar motors and drivers.- 2D / 3D CAD data available
Starting from∗ ： 97.34 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Programless controller LECP1 series
SMC
[Features]
·No program required
Operation setting of electric actuator without using a personal computer / teaching box
·16-step speed / acceleration adjustment
·Compatible with electric actuators with locks
·3-step push thrust settingStarting from∗ ： 16.49 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Electric actuator slider type belt drive motorless specification LEFB series
SMC
It can be combined with your familiar motors and drivers.- 2D / 3D CAD data available
Starting from∗ ： 138.39 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator Rod With Guide Type LEYG Series Step Motor/Servo Motor
SMC
[Features]
·The guide rod is compactly integrated to achieve lateral load resistance and high-precision detent.
·Tip lateral load: 5 times (Comparison of rod type, size 25, 100 strokes)
·Compatible with plain bearings and ball bush bearings
·Pressing control can be switched
Can be held with the rod pressed against the work, etc.- 2D / 3D CAD data available
Starting from∗ ： 24.21 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Electric slide table high rigidity type LESH series
SMC
Integrated circulation type linear guide with integrated guide rail and table.
[Features]
·Compact, Space-Saving
·61% reduction in volume
·Built-in motor in the body
·Symmetrical L type: The position of the table and cable is opposite to that of the R type, expanding the range of design.
·Motor straight type D type: Width dimension shortened, MAX. 45% reduced- 2D / 3D CAD data available
Starting from∗ ： 695.53 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Electric actuator slider type belt drive LEFB series AC servo motor LECY□
SMC
[Features]
·Easy to install the main body / reduce installation man-hours
The main body can be installed without removing exterior parts such as covers.
·Table position can be detected by auto switch
·Up to 4 locations can be attached to both sides of the body
·Belt drive- 2D / 3D CAD data available
Starting from∗ ： 1,995.80 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric cylinder LZB series
SMC
It can be used like an air cylinder. -The drive system is a sliding screw.- 2D / 3D CAD data available
Starting from∗ ： 278.34 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Electric actuator slider type ball screw drive LEFS series AC servo motor LECS□
SMC
[Features]
·Easy to install the main body / reduce installation man-hours
The main body can be installed without removing exterior parts such as covers.
·Table position can be detected by auto switch
·Up to 4 locations can be attached to both sides of the body
·Ball screw drive- 2D / 3D CAD data available
Starting from∗ ： 1,432.34 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator Miniature Slide Table Type LEPS Series Step Motor
SMC
[Features]
·High thrust type / basic type
·Compact type motor with excellent compactness and weight reduction- 2D / 3D CAD data available
Starting from∗ ： 598.76 € Min. Shipping Days ： 15 Days *Unit price with basic configuration
-
Electric Actuator Slider Type Belt Drive LEFB Series Step Motor/Servo Motor
SMC
A slider-type electric actuator.
[Features]
· Maximum stroke: 2,000 mm (step motor [24‑V DC servo]).
· Maximum speed: 2,000 mm/s (step motor [24‑V DC servo]).
· Positioning repeatability: ±0.08 mm (step motor [24‑V DC servo]).
· Maximum speed: 2,000 mm/s (AC servo motor).
· Maximum stroke: 3,000 mm (AC servo motor).
· Maximum acceleration/deceleration: 20,000 mm/S2 (AC servo motor).
· Pulse input type, with absolute encoder (AC servo motor).
· Positioning Repeatability: ±0.06 mm (AC servo motor).- 2D / 3D CAD data available
Starting from∗ ： 924.41 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Electric actuator rod type LEY series AC servo motor LECY□
SMC
[Features]
·High-Power Motor (100W/200W/400W)
·Improved high-speed transport capacity
·Supports high acceleration / deceleration (5,000 mm/s2)
·Equipped with absolute encoder- 2D / 3D CAD data available
Starting from∗ ： 1,173.60 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
- Promotional pricing
Electric Slide Table, Compact Type LES Series
SMC
A compact-type electric actuator.
[Features]
· Compact: Workpiece mounting height reduced by up to 12% compared to LESH.
· Vertical work load: increased by up to 50%.
· Lightweight: reduced by up to 29%.
· Maximum pushing force: 180 N.
· Positioning repeatability: ±0.05 mm.
· Reduced cycle time. (Maximum acceleration/deceleration: 5,000 mm/S2, Maximum speed: 400 mm/s)- 2D / 3D CAD data available
Starting from∗ ： 627.53 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Electric actuator miniature rod type LEPY series step motor (Servo 24 V DC)
SMC
[Features]
・ Small and lightweight
·Manual operation screw: Adjustable when the power for rod / table drive is off- 2D / 3D CAD data available
Starting from∗ ： 493.87 € Min. Shipping Days ： 15 Days *Unit price with basic configuration
-
Controller (Step Data Input Type) LECP6 (Step Motor) / LECA6 (Servo Motor) Series
SMC
A step data input type electric actuator.
[Features]
· Already set with actuator data when shipped. (Actuator and controller are provided as a set)
· Easy mode for simple setting and normal mode for detailed setting.
· Teaching box, controller setting software.
· Number of step data: 64 points.
· Completion signal: (INP) output.Starting from∗ ： 7.27 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Gateway unit LEC-G series
SMC
[Features]
·Fieldbus support is available for electric actuators / LE□.
·Conversion unit for fieldbus network and LEC serial communication.
·Supports two types of operation methods.
Step data input, numerical input.
·Numerical values such as position and speed can be confirmed by PLC.- 2D / 3D CAD data available
Starting from∗ ： 15.61 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Electric actuator support guide belt drive LEFG series
SMC
[Features]
·We have prepared a support guide to support workpieces with a large amount of overhang.
·LEF series / since the external dimensions are the same as the body part, it is easy to install and contributes to the reduction of assembly man-hours.
·Since the seal band is standard equipment, it prevents grease from scattering and foreign matter from the outside.- 2D / 3D CAD data available
Starting from∗ ： 383.87 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator, Rod Type, Dust-Tight / Drip-Proof (Equivalent to IP65) Specifications, LEY-X5 Series, LECS□
SMC
[Features]
·Protective Enclosure: IP65 equivalent
·Supports up to 500 mm stroke- 2D / 3D CAD data available
Starting from∗ ： 1,128.06 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
- Promotional pricing
Electric Actuator, Slider Type, Ball Screw Drive, Motorless Type LEFS Series
SMC
A motorless specification electric actuator.
[Features]
· The motorless design permits the mounting of various servo motors.
· Compatible with motors/drivers that have been conventionally used.
· Slider type.
· RoHS compliant.
· Size 25 - stroke: 50 to 800 mm.
· Size 32 - stroke: 50 to 1,000 mm.
· Size 40 - stroke: 150 to 1,200 mm.- 2D / 3D CAD data available
Starting from∗ ： 127.39 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Programless controller LECP2 series with stroke learning function
SMC
[Features]
·Air cylinder-like end-to-end control
·End-to-end + middle 12-point positioningStarting from∗ ： 343.51 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric actuator high rigidity slider type ball screw drive motorless specification LEJS series
SMC
[Features] It can be combined with your familiar motors and drivers.- 2D / 3D CAD data available
Starting from∗ ： 37.09 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric actuator high rigidity slider type belt drive LEJB series AC servo motor LECS□
SMC
[Features]
·Thin low center of gravity
·High precision / high rigidity
·Reduction of installation man-hours
·Weight reduced by about 37%
·No interference with the workpiece motor
·Belt drive- 2D / 3D CAD data available
Starting from∗ ： 2,232.19 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator, Slider Type, Ball Screw Drive, Clean Specifications, 11-LEFS Series, LECS□
SMC
Vacuum suction from the vacuum port suppresses dust generation from the ball screw and guide to the outside.
[Features]
·Built-in vacuum piping
·The main body can be installed without removing exterior parts such as covers.
·Body body linear guide specifications- 2D / 3D CAD data available
Starting from∗ ： 1,348.27 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
3-axis step motor controller JXC92 series
SMC
[Features]
·Speed tuning control is possible.
·Straight line / arc interpolation is possible.
·Positioning / pressing operation.
·Absolute / relative position coordinate indication.
·Step data entry (up to 2048 points).
·Space saving, wiring saving.- 2D / 3D CAD data available
Starting from∗ ： 1,682.18 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric actuator support guide ball screw drive LEFG series
SMC
[Features]
·We have prepared a support guide to support workpieces with a large amount of overhang.
·LEF series / since the external dimensions are the same as the body part, it is easy to install and contributes to the reduction of assembly man-hours.
·Since the seal band is standard equipment, it prevents grease from scattering and foreign matter from the outside.- 2D / 3D CAD data available
Starting from∗ ： 315.13 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Electric actuator rod type dust-proof and drip-proof specification LEY series AC servo motor LECS□
SMC
[Features]
·Protective Enclosure: IP65 equivalent (Option selection)
·Supports up to 800 mm stroke- 2D / 3D CAD data available
Starting from∗ ： 1,878.61 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
AC Servo Motor Driver, Incremental Type, LECSA Series / Absolute Type
SMC
An electric actuator with display setting functionality.
[Features]
· Pulse input type motor driver.
· Supported motor capacities: 100 W, 200 W, 400 W.
· Compatible encoders: incremental type and absolute type.
· Servo adjustment using auto gain tuning.- 2D / 3D CAD data available
Starting from∗ ： 83.24 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Card motor LAT3 series
SMC
Miniaturize the transport / pressing / length measurement system using a linear motor.
[Features]
·Simple programming (Enter tact time)
Complete by entering only 3 items: travel time, target position, and loading mass- 2D / 3D CAD data available
Starting from∗ ： 13.87 € Min. Shipping Days ： 17 Days *Unit price with basic configuration
-
Electric Actuator, High Stiffness Slider Type, Ball Screw Drive LEJS Series, LECS□
SMC
[Features]
·Thin low center of gravity
·High precision / high rigidity
·Reduction of installation man-hours
·Weight reduced by about 37%
·No interference with the workpiece motor
·Ball screw drive- 2D / 3D CAD data available
Starting from∗ ： 2,562.24 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator Guide Rod Slider Belt Drive LEL Series Step Motor
SMC
[Features]
·Thin low center of gravity
·High precision / high rigidity
·Reduction of installation man-hours
·Weight reduced by about 37%
·No interference with the workpiece motor
·Belt drive- 2D / 3D CAD data available
Starting from∗ ： 520.43 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric actuator slider type belt drive LEFB series AC servo motor LECS□
SMC
[Features]
·Easy to install the main body / reduce installation man-hours
The main body can be installed without removing exterior parts such as covers.
·Table position can be detected by auto switch
·Up to 4 locations can be attached to both sides of the body
·Belt drive- 2D / 3D CAD data available
Starting from∗ ： 1,209.41 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator, Low Profile Slider Type, Linear Guide 1-Axis/2-Axis, LEMH/LEMHT Series
SMC
[Features]
·Thin low center of gravity
The table height is thinned by the belt drive and the offset structure of the guide part.
·Air cylinder-like end-to-end control (12 intermediate stops possible). Easy position setting by numerical input
·Compatible with conventional E-MY2 series
·High maintainability
·Motor Mounting Position: Up / down, left / right selectable
·Non-contact auto switch can be installed for limit confirmation and intermediate signal confirmation- 2D / 3D CAD data available
Starting from∗ ： 1,319.73 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric actuator guided rod type LEYG series AC servo motor LECS□
SMC
[Features]
·The guide rod is compactly integrated to achieve lateral load resistance and high-precision detent.
·Tip lateral load: 5 times (Comparison of rod type, size 25, 100 strokes)
·Compatible with plain bearings and ball bush bearings
·Pressing control can be switched
Can be held with the rod pressed against the work, etc.- 2D / 3D CAD data available
Starting from∗ ： 1,213.06 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator, Slider Type, Ball Screw Drive, Clean Specifications, 11-LEFS Series
SMC
Vacuum suction from the vacuum port suppresses dust generation from the ball screw and guide to the outside.
[Features]
·Built-in vacuum piping
·The main body can be installed without removing exterior parts such as covers.
·Body body linear guide specifications- 2D / 3D CAD data available
Starting from∗ ： 918.92 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric cylinder LZC series
SMC
It can be used like an air cylinder. -The drive system is a rolled ball screw.- 2D / 3D CAD data available
Starting from∗ ： 380.90 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
4-axis step motor controller JXC73 / 83/93 series
SMC
[Features]
·Speed tuning control is possible.
·Straight line / arc interpolation is possible.
·Positioning / pressing operation.
·Absolute / relative position coordinate indication.
·Step data entry (up to 2048 points).
·Space saving, wiring saving.- 2D / 3D CAD data available
Starting from∗ ： 12.15 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator, Low Profile Slider Type, Basic Type, LEMB Series, Step Motor
SMC
[Features]
·Thin low center of gravity
The table height is thinned by the belt drive and the offset structure of the guide part.
·Air cylinder-like end-to-end control (12 intermediate stops possible)
·Easy position setting by numerical input
·Compatible with conventional E-MY2 series
·Can be combined with various guides
·Motor Mounting Position: Up / down, left / right selectable
·Non-contact auto switch can be installed for limit confirmation and intermediate signal confirmation!- 2D / 3D CAD data available
Starting from∗ ： 679.23 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator Low Profile Slider Type, Cam Follower Guide Type, LEMC Series Step Motor
SMC
[Features]
·Thin low center of gravity
The table height is thinned by the belt drive and the offset structure of the guide part.
·Air cylinder-like end-to-end control (12 intermediate stops possible). Easy position setting by numerical input
·Compatible with conventional E-MY2 series
·High maintainability
·Motor Mounting Position: Up / down, left / right selectable
·Non-contact auto switch can be installed for limit confirmation and intermediate signal confirmation- 2D / 3D CAD data available
Starting from∗ ： 1,094.31 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator, Rod Type, Dust-Tight / Drip-Proof (Equivalent to IP65) Specifications, LEY-X5 Series
SMC
[Features]
·Protective Enclosure: IP65 equivalent
·Supports up to 500 mm stroke- 2D / 3D CAD data available
Starting from∗ ： 1,065.37 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric actuator rod type with guide LEYG series AC servo motor LECY□
SMC
[Features]
·The guide rod is compactly integrated to achieve lateral load resistance and high-precision detent.
·Tip lateral load: 5 times (Comparison of rod type, size 25, 100 strokes)
·Compatible with plain bearings and ball bush bearings
·Pressing control can be switched
Can be held with the rod pressed against the work, etc.Starting from∗ ： 1,570.63 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Main Body, Peripheral Components |
| Type |
| Stroke(mm) |
| Max. Transportable Mass Range (Horizontal)(kg) |
| Max. Transportable Mass (Horizontal)(kg) |
| Max. Transportable Mass Range (Vertical)(kg) |
| Max. Transportable Mass (Vertical)(kg) |
| Drive Method |
| Guide |
| Lead(mm) |
| Input Power Supply |
| Position Detection |
| I/O Module |
| Table Width W1(mm) |
| Brake |
| Max. Thrust Force Range(N) |
| Max. Thrust Force(N) |
| Noise Filters |
| Table Length L1(mm) |
| Usage Environment |
| Positioning Repeatability(µm) |
| Maximum Velocity(mm/sec) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC |
| Product Series | Electric Actuator Rod Type LEY Series Step Motor/Servo Motor | Electric Actuator Slider Type Ball Screw Drive LEFS Series Step Motor/Servo Motor | Electric actuator rod type motorless specification LEY series | Electric actuator rod type with guide motorless specification LEYG series | Electric actuator slider type belt drive motorless specification LEFB series | Electric Actuator Rod With Guide Type LEYG Series Step Motor/Servo Motor | Electric actuator slider type belt drive LEFB series AC servo motor LECY□ | Electric actuator slider type ball screw drive LEFS series AC servo motor LECS□ | Electric Actuator Miniature Slide Table Type LEPS Series Step Motor | Electric Actuator Slider Type Belt Drive LEFB Series Step Motor/Servo Motor | Electric actuator miniature rod type LEPY series step motor (Servo 24 V DC) | Controller (Step Data Input Type) LECP6 (Step Motor) / LECA6 (Servo Motor) Series | Electric Actuator, Slider Type, Ball Screw Drive, Motorless Type LEFS Series | Programless controller LECP2 series with stroke learning function | Electric actuator high rigidity slider type ball screw drive motorless specification LEJS series | Electric actuator high rigidity slider type belt drive LEJB series AC servo motor LECS□ | Electric Actuator, Slider Type, Ball Screw Drive, Clean Specifications, 11-LEFS Series, LECS□ | Electric actuator support guide ball screw drive LEFG series | Electric actuator rod type dust-proof and drip-proof specification LEY series AC servo motor LECS□ | AC Servo Motor Driver, Incremental Type, LECSA Series / Absolute Type | Electric Actuator, High Stiffness Slider Type, Ball Screw Drive LEJS Series, LECS□ | Electric Actuator Guide Rod Slider Belt Drive LEL Series Step Motor | Electric actuator slider type belt drive LEFB series AC servo motor LECS□ | Electric Actuator, Low Profile Slider Type, Linear Guide 1-Axis/2-Axis, LEMH/LEMHT Series | Electric actuator guided rod type LEYG series AC servo motor LECS□ | Electric Actuator, Slider Type, Ball Screw Drive, Clean Specifications, 11-LEFS Series | Electric Actuator, Low Profile Slider Type, Basic Type, LEMB Series, Step Motor | Electric Actuator Low Profile Slider Type, Cam Follower Guide Type, LEMC Series Step Motor | Electric actuator rod type with guide LEYG series AC servo motor LECY□ | ||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Starting from∗ | 595.53 € *Unit price with basic configuration | 988.33 € *Unit price with basic configuration | 475.09 € *Unit price with basic configuration | 1,000.57 € *Unit price with basic configuration | 5.73 € *Unit price with basic configuration | 5.19 € *Unit price with basic configuration | 97.34 € *Unit price with basic configuration | 16.49 € *Unit price with basic configuration | 138.39 € *Unit price with basic configuration | 24.21 € *Unit price with basic configuration | 695.53 € *Unit price with basic configuration | 1,995.80 € *Unit price with basic configuration | 278.34 € *Unit price with basic configuration | 1,432.34 € *Unit price with basic configuration | 598.76 € *Unit price with basic configuration | 924.41 € *Unit price with basic configuration | 1,173.60 € *Unit price with basic configuration | 627.53 € Special price *Unit price with basic configuration Promotional pricing | 493.87 € *Unit price with basic configuration | 7.27 € *Unit price with basic configuration | 15.61 € *Unit price with basic configuration | 383.87 € *Unit price with basic configuration | 1,128.06 € *Unit price with basic configuration | 127.39 € Special price *Unit price with basic configuration Promotional pricing | 343.51 € *Unit price with basic configuration | 37.09 € *Unit price with basic configuration | 2,232.19 € *Unit price with basic configuration | 1,348.27 € *Unit price with basic configuration | 1,682.18 € *Unit price with basic configuration | 315.13 € *Unit price with basic configuration | 1,878.61 € *Unit price with basic configuration | 83.24 € *Unit price with basic configuration | 13.87 € *Unit price with basic configuration | 2,562.24 € *Unit price with basic configuration | 520.43 € *Unit price with basic configuration | 1,209.41 € *Unit price with basic configuration | 1,319.73 € *Unit price with basic configuration | 1,213.06 € *Unit price with basic configuration | 918.92 € *Unit price with basic configuration | 380.90 € *Unit price with basic configuration | 12.15 € *Unit price with basic configuration | 679.23 € *Unit price with basic configuration | 1,094.31 € *Unit price with basic configuration | 1,065.37 € *Unit price with basic configuration | 1,570.63 € *Unit price with basic configuration |
| Min. Shipping Days ： | 7 Days | 4 Days | 9 Days | 26 Days | 12 Days | 4 Days | 7 Days | 9 Days | 26 Days | 7 Days | 8 Days | 26 Days | 4 Days | 26 Days | 15 Days | 4 Days | 26 Days | Same day | 15 Days | 4 Days | 4 Days | 26 Days | 26 Days | Same day | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 7 Days | 26 Days | 4 Days | 17 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days | 26 Days |
| Main Body, Peripheral Components | Main Body | Main Body | Main Body | Main Body | Peripheral Components | Peripheral Components | Main Body / Peripheral Components | Peripheral Components | Main Body / Peripheral Components | Main Body / Peripheral Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Peripheral Components | Peripheral Components | Peripheral Components | Main Body | Main Body / Peripheral Components | Peripheral Components | Main Body / Peripheral Components | Main Body | Main Body | Peripheral Components | Peripheral Components | Main Body | Peripheral Components | Main Body / Peripheral Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Peripheral Components | Main Body | Main Body | Main Body | Main Body |
| Type | Rods | Sliders | Rods | Rods | - | - | Rods | - | Sliders | Rods | Sliders | Sliders | Rods | Sliders | Sliders | Sliders | Rods | Sliders | Rods | - | - | - | Rods | Sliders | - | Sliders | Sliders | Sliders | - | - | Rods | - | Sliders | Sliders | Sliders | Sliders | Sliders | Rods | Sliders | Rods | - | Sliders | Sliders | Rods | Rods |
| Stroke(mm) | 30 ～ 500 | 1,000 ～ 950 | 30 ～ 800 | 30 ～ 500 | - | - | 30 ～ 300 | - | 1,000 ～ 3000 | 30 ～ 300 | 50 ～ 150 | 1,000 ～ 3000 | 10 ～ 200 | 1,000 ～ 950 | 25 ～ 50 | 1,000 ～ 900 | 30 ～ 800 | 30 ～ 150 | 25 ～ 75 | - | - | - | 30 ～ 500 | 1,000 ～ 950 | - | 1,000 ～ 900 | 1,000 ～ 3000 | 1,000 ～ 900 | - | - | 50 ～ 800 | - | 10 ～ 50 | 1,000 ～ 900 | 1,000 ～ 900 | 1,000 ～ 3000 | 1,000 ～ 1400 | 30 ～ 300 | 1,000 ～ 850 | 25 ～ 200 | - | 1,000 ～ 1700 | 1,000 ～ 1700 | 30 ～ 500 | 50 ～ 300 |
| Max. Transportable Mass Range (Horizontal)(kg) | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 / 150.1 or Higher | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | - | - | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | - | 2.1 to 5.0 / 10.1 to 20.0 / 20.1 to 50.0 | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 0 to 2.0 / 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 | 2.1 to 5.0 / 10.1 to 20.0 / 20.1 to 50.0 | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 0 to 2.0 | 0 to 2.0 / 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 / 150.1 or Higher | 0 to 2.0 / 2.1 to 5.0 | 0 to 2.0 / 2.1 to 5.0 / 5.1 to 10.0 | - | - | - | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | - | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | - | - | 20.1 to 50.0 / 50.1 to 100.0 / 150.1 or Higher | - | 0 to 2.0 | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 2.1 to 5.0 | 2.1 to 5.0 / 10.1 to 20.0 / 20.1 to 50.0 | 5.1 to 10.0 / 10.1 to 20.0 | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 | - | 5.1 to 10.0 / 10.1 to 20.0 | 5.1 to 10.0 / 10.1 to 20.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 |
| Max. Transportable Mass (Horizontal)(kg) | 3 ～ 90 | 5 ～ 65 | 18 ～ 200 | 18 ～ 60 | - | - | 18 ～ 60 | - | 5 ～ 25 | 3 ～ 90 | 1 ～ 12 | 5 ～ 25 | 2.4 ～ 20 | 10 ～ 60 | 0.75 ～ 2 | 1 ～ 19 | 18 ～ 200 | 1 ～ 5 | 1 ～ 6 | - | - | - | 18 ～ 60 | 10 ～ 60 | - | 15 ～ 85 | 10 ～ 30 | 20 ～ 60 | - | - | 40 ～ 200 | - | 1 | 15 ～ 85 | 3 ～ 5 | 5 ～ 25 | 10 ～ 20 | 18 ～ 60 | 9 ～ 65 | 2.4 ～ 20 | - | 6 ～ 11 | 10 ～ 20 | 7 ～ 80 | 18 ～ 60 |
| Max. Transportable Mass Range (Vertical)(kg) | 0 to 2.0 / 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 0 to 2.0 / 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 / 100.1 or Higher | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | - | - | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | - | - | 0 to 2.0 / 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 0 to 2.0 / 2.1 to 5.0 | - | - | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | 0 to 2.0 | - | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 / 100.1 or Higher | 0 to 2.0 / 2.1 to 5.0 | 0 to 2.0 | - | - | - | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | - | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 | - | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | - | - | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 / 100.1 or Higher | - | 0 to 2.0 | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 | - | - | - | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | 0 to 2.0 / 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | - | - | - | - | 0 to 2.0 / 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 |
| Max. Transportable Mass (Vertical)(kg) | 2 ～ 53 | 0.5 ～ 23 | 8 ～ 115 | 8 ～ 46 | - | - | 7 ～ 44 | - | - | 1.5 ～ 51 | 0.25 ～ 4 | - | - | 4 ～ 30 | 0.25 ～ 1.5 | - | 8 ～ 115 | 0.25 ～ 5 | 0.25 ～ 1.5 | - | - | - | 8 ～ 46 | 4 ～ 30 | - | 3 ～ 20 | - | 8 ～ 30 | - | - | 19 ～ 115 | - | 0.05 ～ Not vertical | 3 ～ 20 | - | - | - | 7 ～ 44 | 2 ～ 23 | - | - | - | - | 2 ～ 42 | 7 ～ 44 |
| Drive Method | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | - | - | Rolled Ball Screw | - | Belts | Rolled Ball Screw | Slide Screws | Belts | Slide Screws | Rolled Ball Screw | Rolled Ball Screw | Belts | Rolled Ball Screw | Slide Screws | Slide Screws | - | - | - | Rolled Ball Screw | Rolled Ball Screw | - | Rolled Ball Screw | Belts | Rolled Ball Screw | - | - | Rolled Ball Screw | - | Linear Motor | Rolled Ball Screw | Belts | Belts | Belts | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | - | Belts | Belts | Rolled Ball Screw | Rolled Ball Screw |
| Guide | Not Provided | Provided | Provided | Not Provided | - | - | Provided | - | Provided | Provided | Provided | Provided | Not Provided | Provided | Provided | Provided | Not Provided | Provided | Provided | - | - | - | Not Provided | Provided | - | Provided | Provided | Provided | - | - | Not Provided | - | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | - | Provided | Provided | Not Provided | Provided |
| Lead(mm) | 2.5 ～ 16 | 5 ～ 30 | 2.86 ～ 20 | 3 ～ 20 | - | - | 3 ～ 20 | - | 54 equivalent | 2.5 ～ 16 | 4 ～ 16 | 54 equivalent | 2 ～ 12 | 6 ～ 30 | 4 ～ 10 | 48 ～ Equivalent to 48 | 2.86 ～ 20 | 4 ～ 16 | 4 ～ 10 | - | - | - | 3 ～ 20 | 6 ～ 30 | - | 8 ～ 30 | 27 ～ 42 | 6 ～ 20 | - | - | 2.86 ～ 20 | - | - | 8 ～ 30 | Equivalent to 48 | 54 equivalent | Equivalent to 48 | 3 ～ 20 | 5 ～ 20 | 2 ～ 12 | - | Equivalent to 48 | Equivalent to 48 | 3 ～ 16 | 4 ～ 12 |
| Input Power Supply | 24 V DC | 24 V DC | - | - | - | - | - | - | - | 24 V DC | 24 V DC | - | 24 V DC | - | 24 V DC | 24 V DC | - | 24 V DC | 24 V DC | 24 V DC | - | - | - | - | - | - | - | - | - | - | - | Single-Phase, 100 to 120 V AC ～ Single-Phase, 200 to 230 V AC | 24 V DC | - | 24 V DC | - | 24 V DC | - | 24 V DC | 24 V DC | - | 24 V DC | 24 V DC | 24 V DC | - |
| Position Detection | Incremental | Incremental | - | Incremental / Absolute | - | - | - | - | - | Incremental | Incremental | Absolute | - | Incremental / Absolute | Incremental | Incremental | Absolute | Incremental | Incremental | Incremental | - | - | Incremental / Absolute | Incremental | - | - | Incremental / Absolute | Incremental / Absolute | - | - | Incremental / Absolute | Incremental / Absolute | Incremental | Incremental / Absolute | Incremental | Incremental / Absolute | Incremental | Incremental / Absolute | Incremental | - | - | Incremental | Incremental | Incremental | Absolute |
| I/O Module | NPN / PNP / DeviceNet / Ethernet / Not Provided / EtherCAT / IO-Link / PROFINET | NPN / PNP / DeviceNet / Ethernet / Not Provided / EtherCAT / IO-Link / PROFINET | - | - | NPN / PNP | DeviceNet / Ethernet / EtherCAT / IO-Link / PROFINET | - | NPN / PNP | - | NPN / PNP / DeviceNet / Ethernet / Not Provided / EtherCAT / PROFINET | NPN / PNP / DeviceNet / Ethernet / Not Provided / EtherCAT / IO-Link / PROFINET | - | NPN / PNP / Not Provided | - | NPN / PNP / Ethernet / Not Provided / EtherCAT / PROFINET | NPN / PNP / DeviceNet / Ethernet / Not Provided / EtherCAT / IO-Link / PROFINET | - | NPN / PNP / DeviceNet / Ethernet / Not Provided / EtherCAT / IO-Link / PROFINET | NPN / PNP / Ethernet / Not Provided / EtherCAT / PROFINET | NPN / PNP | - | - | - | - | NPN / PNP | - | - | - | Ethernet | - | - | - | NPN / PNP / Not Provided | - | NPN / PNP / Ethernet / Not Provided / EtherCAT / PROFINET | - | NPN / PNP / Ethernet / Not Provided / EtherCAT / PROFINET | - | NPN / PNP / Ethernet / Not Provided / EtherCAT / PROFINET | NPN / PNP / Not Provided | - | NPN / PNP / Ethernet / Not Provided / EtherCAT / PROFINET | NPN / PNP / Ethernet / Not Provided / PROFINET | PNP / DeviceNet / Ethernet / Not Provided / PROFINET | - |
| Table Width W1(mm) | - | 39.4 ～ 74 | - | - | - | - | - | - | 50 ～ 74 | - | 32 ～ 61 | 50 ～ 74 | - | 50 ～ 74 | 19 ～ 24 | 39.4 ～ 60 | - | 32.2 ～ 60 | - | - | - | - | - | 50 ～ 74 | - | 105 ～ 129 | 105 ～ 129 | 50 ～ 74 | - | - | - | - | 49 | 105 ～ 129 | 56 | 50 ～ 74 | 50.4 ～ 124.7 | - | 39.4 ～ 74 | - | - | 61 | 72.4 ～ 108.7 | - | - |
| Brake | Not Provided / Provided | Not Provided / Provided | Not Provided | Not Provided / Provided | - | - | Not Provided | - | Not Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided | Not Provided / Provided | Not Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided | - | - | - | Not Provided / Provided | Not Provided | - | Not Provided | Not Provided / Provided | Not Provided / Provided | - | - | Not Provided / Provided | - | Not Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided | - | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided |
| Max. Thrust Force Range(N) | 0 to 100 / 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 / 1,001 or More | 0 to 100 / 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 / 1,001 or More | 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | - | - | 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | - | 0 to 100 / 101 to 200 / 201 to 300 | 0 to 100 / 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 / 1,001 or More | 0 to 100 / 101 to 200 | 0 to 100 / 101 to 200 / 201 to 300 | 0 to 100 / 101 to 200 | 0 to 100 / 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | 0 to 100 | - | 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 / 1,001 or More | 0 to 100 / 101 to 200 | 0 to 100 | - | - | - | 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | 0 to 100 / 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | - | 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | 0 to 100 / 101 to 200 / 201 to 300 | 101 to 200 / 301 to 500 / 501 to 1000 | - | - | 501 to 1000 / 1,001 or More | - | 0 to 100 | 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | 0 to 100 | 0 to 100 / 101 to 200 / 201 to 300 | 0 to 100 / 101 to 200 | 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | 0 to 100 / 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | 0 to 100 / 101 to 200 | - | 0 to 100 / 101 to 200 | 0 to 100 / 101 to 200 | 0 to 100 / 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | 101 to 200 / 301 to 500 / 501 to 1000 |
| Max. Thrust Force(N) | 30 ～ 1058 | 49 ～ 637 | 131 ～ 3343 | 131 ～ 736 | - | - | 131 ～ 736 | - | 49 ～ 245 | 30 ～ 1058 | 7.5 ～ 180 | 49 ～ 245 | 24 ～ 196 | 98 ～ 588 | 10 ～ 50 | - | 131 ～ 3343 | 7.5 ～ 180 | 10 ～ 50 | - | - | - | 131 ～ 736 | 98 ～ 588 | - | 147 ～ 833 | 98 ～ 294 | 196 ～ 588 | - | - | 521 ～ 3343 | - | 2.5 ～ 6 | 147 ～ 833 | 29.4 ～ 49 | 49 ～ 245 | 98 ～ 196 | 131 ～ 736 | 88.2 ～ 637 | 24 ～ 196 | - | 58.8 ～ 107.8 | 98 ～ 196 | 35 ～ 707 | 131 ～ 736 |
| Noise Filters | Not Provided | Not Provided / Provided | Not Provided | Not Provided | - | - | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | - | - | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided |
| Table Length L1(mm) | - | 72 ～ 170 | - | - | - | - | - | - | 102 ～ 170 | - | 111 ～ 285 | 102 ～ 170 | - | 102 ～ 170 | 76.4 ～ 113.2 | 72 ～ 122 | - | 88.5 ～ 316.5 | - | - | - | - | - | 102 ～ 170 | - | 160 ～ 172 | 160 ～ 172 | 102 ～ 170 | - | - | - | - | 60 ～ 150 | 160 ～ 172 | 64 ～ 82 | 102 ～ 170 | 70 ～ 100 | - | 72 ～ 170 | - | - | 78 | 70 ～ 100 | - | - |
| Usage Environment | Standard | Standard | Dust Resistant | Standard | - | - | Standard | - | Standard | Standard | Standard / Dust Resistant | Standard | Standard | Standard | Standard | Standard | Dust Resistant | Standard / Dust Resistant | Standard | - | - | - | Dust Resistant | Standard | - | Standard | Standard | Standard | - | - | Dust Resistant | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard / Dust Resistant | Standard |
| Positioning Repeatability(µm) | ±20 | ±15 ～ ±20 | ±10 ～ ±20 | ±10 ～ ±20 | - | - | ±10 ～ ±20 | - | ±60 | ±20 | ±50 | ±60 | - | ±10 ～ ±20 | ±50 | ±80 | ±10 ～ ±20 | ±50 | ±50 | - | - | - | ±20 | ±10 ～ ±20 | - | ±10 ～ ±20 | ±40 | ±20 | - | - | ±10 ～ ±20 | - | ±5 ～ ±90 | ±10 ～ ±20 | ±80 | ±60 | ±80 | ±10 ～ ±20 | ±15 ～ ±20 | - | - | ±80 | ±80 | ±20 | ±20 |
| Maximum Velocity(mm/sec) | 75 ～ 500 | 1,000 ～ 1100 | 1,000 ～ 1000 | 1,000 ～ 1000 | - | - | 1,000 ～ 900 | - | 2000 | 75 ～ 500 | 150 ～ 400 | 2000 | 33 ～ 200 | 1,000 ～ 1500 | 150 ～ 350 | 1,500 ～ 2000 | 1,000 ～ 900 | 200 ～ 400 | 150 ～ 350 | - | - | - | 1,000 ～ 900 | 1,000 ～ 940 | - | 1,200 ～ 1800 | 2000 ～ 3000 | 1,000 ～ 940 | - | - | 1,000 ～ 800 | - | 400 | 1,200 ～ 1800 | 1,000 ～ 500 | 2000 | 2000 | 1,000 ～ 900 | 250 ～ 500 | 33 ～ 200 | - | 1,000 | 1,000 | 100 ～ 400 | 1,000 ～ 900 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Main Body, Peripheral Components
-
Type
-
Stroke(mm)
- 1,000
- 1,100
- 1,200
- 1,500
- 1,800
- 2,000
- 10
- 15
- 20
- 25
- 30
- 40
- 50
- 60
- 70
- 75
- 80
- 100
- 120
- 125
- 150
- 200
- 250
- 300
- 350
- 400
- 450
- 500
- 550
- 600
- 650
- 700
- 750
- 800
- 850
- 900
- 950
- 1000
- 1050
- 1100
- 1150
- 1200
- 1250
- 1300
- 1350
- 1400
- 1450
- 1500
- 1550
- 1600
- 1650
- 1700
- 1750
- 1800
- 1850
- 1900
- 1950
- 2000
- 2050
- 2100
- 2150
- 2200
- 2250
- 2300
- 2350
- 2400
- 2450
- 2500
- 2550
- 2600
- 2650
- 2700
- 2750
- 2800
- 2850
- 2900
- 2950
- 3000
- 3050
-
Max. Transportable Mass Range (Horizontal)(kg)
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Max. Transportable Mass (Horizontal)(kg)
- 0.75
- 1
- 1.5
- 2
- 2.4
- 2.5
- 3
- 4
- 4.4
- 5
- 6
- 7
- 7.3
- 7.5
- 8
- 8.2
- 9
- 10
- 11
- 11.9
- 12
- 14
- 15
- 17
- 18
- 19
- 20
- 23
- 25
- 30
- 35
- 40
- 45
- 50
- 55
- 60
- 65
- 70
- 80
- 85
- 90
- 200
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Max. Transportable Mass Range (Vertical)(kg)
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Max. Transportable Mass (Vertical)(kg)
- 0.05
- 0.1
- 0.25
- 0.5
- 1
- 1.5
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 6
- 7
- 7.5
- 8
- 8.5
- 9
- 10
- 11
- 12
- 12.5
- 13
- 14
- 15
- 16
- 17
- 18.5
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 27
- 28.5
- 29
- 30
- 35
- 37
- 38
- 41
- 42
- 43
- 44
- 46
- 50
- 51
- 53
- 72
- 115
- Not vertical
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Drive Method
-
Guide
-
Lead(mm)
- 2
- 2.5
- 2.86
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 16
- 20
- 24
- 25 Equivalent
- 27
- 30
- 42
- 48
- Equivalent to 48
- 54 equivalent
-
Input Power Supply
- 24 V DC
- 24/48 V DC
- Single-Phase, 100 to 115 V AC
- Single-Phase, 100 to 120 V AC
- Single-Phase, 200 to 230 V AC
- Three-Phase, 200 to 230 V AC
- Single-Phase, 200 to 240 V AC
-
Position Detection
-
I/O Module
-
Table Width W1(mm)
-
Brake
-
Max. Thrust Force Range(N)
-
Max. Thrust Force(N)
-
Noise Filters
-
Table Length L1(mm)
-
Usage Environment
-
Positioning Repeatability(µm)
-
Maximum Velocity(mm/sec)
Narrow search by specifying Brand
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Single Axis Robots
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.