Grub Screws

?* Information on days to ship and prices

• 

  Grub screws with hexagon socket and flat point DIN 913 without LONG-LOK (K0707)

  KIPP

  [Specifications]
  ・Thread Material: Steel, Stainless Steel
  ・Surface finish body: bright
  ・Main colour: black
  ・D1=Thread: M3-M10
  
  [Features]
  ・Steel or stainless steel (A 2)
  ・G=Thread: M3-M10
  ・DIN 913

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub Screw _SGPS

  NABEYA BI-TECH

  [Features]
  · Thread main body is superior, wear-resistant stainless steel.
  · SGPS-PLUses a plastic pad, SGPS-BRL uses a mortise pad.
  · Thread sizes from M4 to M12.
  · Thread length can be selected
  · Tightening without workpiece scratching.
  · Grub screw and lever / knob combination products.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub screws with brass / plastic pivot, Stainless Steel

  GANTER

  Stainless Steel-Grub screws GN 913.5 with pivot in brass or plastic are used in applications, where marks and damage on the workpiece are unacceptable.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub screws with ball point

  GANTER

  Grub screws GN 632.1 with ball point are as a rule used with thrust pads GN 631.
  The ball-Ø d2 is smaller than the thread core-Ø, which allows fitting over the ball end.
  The combination of grub screws GN 632.1 and thrust pads GN 631 with gripping elements easily makes clamping screws of many different types.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Grub Screw Sets / Stainless Steel

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.41 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Fulcrum Screws

  HALDER

  Can be used as screw-in foot or thrust pad.
  Compact design for simple levelling by means of the spanner flat at the bushing or preferably by means of an internal hexagon.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.35 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Grub screws with hexagon socket and flat point DIN 913 without LONG-LOK (07165)

  NORELEM

  · Version: steel or stainless steel (A 2)

  Select to compare

  Configure now
  Starting from∗ ：	0.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Grub screw with hexagon socket and pointed end DIN 914 / DIN EN ISO 4027 (K0797)

  KIPP

  [Specifications]
  ・Main material: Steel, Stainless Steel
  ・Surface finish body: bright
  ・Main colour: black
  ・D1=Thread: M3-M10
  
  [Features]
  ・Material: Steel or stainless steel A2
  ・Version: Steel class 45 H, black.Stainless steel A2-70, bright
  ・L=thread length(mm): 5-80
  ・DIN 914 / DIN EN ISO 4027

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Grub screws with thrust pad (K0829)

  KIPP

  · For supporting clamping elements
  
  · Various lengths and sizes
  
  · Freely rotating and swivelling plate

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.87 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Grub screws with hex socket and pin DIN EN ISO 4028 (K2052)

  KIPP

  · Clamping in a shaft collar
  
  · Pressing on objects
  
  · Fastening shafts
  
  · Using door handles

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub Screw Sets / with Thrust Point similar DIN 6332

  MISUMI

  similar DIN 6332

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.45 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub Screw Sets / with Ball Point

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Grub Screw Sets Flanged

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.64 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub screws with Brass / Plastic pivot, Steel

  GANTER

  Grub screws GN 913.3 with pivot in brass or pivot are used in applications, where marks and damage on the workpiece are unacceptable.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Grub screw with thrust pad (05242)

  NORELEM

  · For supporting clamping elements
  
  · Various lengths and sizes
  
  · Freely rotating and swivelling plate

  Select to compare

  Configure now
  Starting from∗ ：	10.97 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub Screw Sets Rubber Pads

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub screws with thrust point, blackened

  GANTER

  The thrust point of these screws DIN 6332 is designed to be used with or without the thrust pad for clamping.
  The snap ring resp. spring is a simple and quick method to connect the thrust pad to the grub screw.
  Through the combination of grub screws DIN 6332 with various handles or knobs, simple clamping screws can be created.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub screws, Stainless Steel

  GANTER

  Stainless-Steel-Grub screws GN 632.5 with ball point are as a rule used with Stainless Steel-Thrust pads GN 631.5.
  The ball-Ø d2 is smaller than the thread core-Ø, which allows fitting over the ball end.
  The combination of grub screws GN 632.1 and thrust pads GN 631.5 with gripping elements easily makes clamping screws of many different types.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub Screw _SGP

  NABEYA BI-TECH

  Tightening without workpiece scratching.
  
  [Features]
  · SGP-PL plastic pad, SGP-BR mortise pad.
  · Wide range of sizes from M3 to M12 available.
  · Thread length can also be selected.
  · Tightening without workpiece scratching.
  · Main body: SUM22L ferrosoferric black oxide coating, pad: polyacetal (white) [SGE-PL], brass [SGP-BR]

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.33 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thrust Pads, DIN 6311 and low model

  HALDER

  Combinable with grub screws DIN 6332 with thrust point EH 22540.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.39 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thrust Pads, Plastic

  HALDER

  For combination with ball-headed grub screws EH 22570.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.72 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Grub Screws, ball-headed

  HALDER

  For combination with plastic thrust pads EH 22570.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.88 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thrust screws (07119)

  NORELEM

  · For gentle clamping or exerting pressure on threaded spindles, axles and shafts
  
  · Application sectors: machine, fixture and plant construction, material handling, assembly
  
  · Simple assembly

  Select to compare

  Configure now
  Starting from∗ ：	1.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub screws with retaining magnet, Steel

  GANTER

  Grub screws GN 913.6 with retaining magnet are a shielded magnetic system.
  Suitable e.g. as workpiece stop, with the magnet holding the workpiece in place.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Levelling feet, Steel

  GANTER

  Levelling feet GN 6311.4 are normally used when a thread is present at the machine side to adjust the height.
  The pin diameter d3 is smaller than the core diameter of the thread, with the effect that the screw can be turned in at the pin. The pressure pin is easily inserted into the plate, with the retaining ring ensuring that the assembly is secure in axial direction.
  The static load of the levelling feet GN 6311.4 is limited by the laod capacity of the grub screw (Tensile strength class 5.8). The static load values (only valid for Type OS/KS) in the above table refer to a net vertical load in relation to the ball socket. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerable reduced which must be taken into consideration.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Thrust pads Steel / Plastic

  GANTER

  Thrust pads GN 6311.1 are used in conjunction with grub screws fitted with thrust point (grub screws DIN 6332, tommy screws DIN 6304 and DIN 6306) to transmit clamping force. They align themselves on uneven and non-parallel surfaces and thus prevent the rotating force being transmitted to the workpiece.
  The plastic cap prevents damage to delicate workpieces.
  The unique shape of the non-removable retaining ring permits easy insertion and removal of grub screws into or from the thrust pad.
  Thrust pads GN 6311.1 can be used in conjunction with DIN 6332 grub screws as levelling pad.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Thrust pads, Plastic

  GANTER

  Thrust pads GN 631 are normally combined with ball point grub screws GN 632.1 / GN 632.5 They are easy to press-on to the ball point of the grub screw by hand.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Thrust pads / Steel / with circlip / DIN 6311

  GANTER

  Thrust pads DIN 6311 are utilized to transmit clamping forces. They lean to uneven and unparallel surfaces and eliminate the transmission of any screw turning movement to the workpiece.
  Hints for installation
  The thrust pad has to be held at an angle allowing the circlip to drop to the bottom of its groove with the split end downwards. The thrust pin is then offered up to the split end of the circlip at the lowest possible angle and pressed home.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Grub screw with hexagon socket and pointed end DIN 914 / DIN EN ISO 4027 (07166)

  NORELEM

  · Ideal for positive connections
  
  · Version: steel or stainless steel (A2)

  Select to compare

  Configure now
  Starting from∗ ：	0.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Thrust Pad _SBP

  NABEYA BI-TECH

  [Features]
  · Use grub screw SGB as set
  · Made of plastic, and so does not scratch the workpiece.
  · Effective where workpiece is not uniform or tilted etc.
  · The thrust pad size can be chosen to suit the workpiece.
  · Material / finishing polyacetal (matt black)

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.39 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Bolt with Thrust Pad (BJ746)

  IMAO CORPORATION

  Swivel tip stop screw. Large round pad is attached to tip. Steel made and SUS versions available.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.49 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Grub Screws, DIN 6332 with thrust point

  HALDER

  For combination with thrust pads with snap ring DIN 6311 form S (EH 22560.) and clamping screws DIN 6332.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.86 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Grub screws with thrust point, zinc plated

  GANTER

  The thrust point of these screws DIN 6332 is designed to be used with or without the thrust pad for clamping.
  The snap ring resp. spring is a simple and quick method to connect the thrust pad to the grub screw.
  Through the combination of grub screws DIN 6332 with various handles or knobs, simple clamping screws can be created.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.88 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Thrust pads, Stainless Steel

  GANTER

  Thrust pads GN 631.5 are normally combined with ball point grub screws GN 632.5. They are easy to press-on to the ball point of the grub screw by hand.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Grub screws thrust point

  GANTER

  [Specifications]
  ・Type: SKN. with thrust point. not hardened
  ・Material: NI. Stainless Steel
  
  The thrust point of these screws DIN 6332 is designed to be used with or without the thrust pad for clamping. The pin diameter of the grub screws is smaller than the core diameter of the thread, allowing them to be screwed in on the pin side. The snap ring resp. snap spring of the thrust pad is a simple and quick method to connect the thrust pad to the grub screw.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.66 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Thrust screws with point (K0272)

  KIPP

  · Serve as supports, stops and thrust pads
  
  · Application sectors: machine and fixture construction, assembly
  
  · For additional positive fixation

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Thrust screws with thrust pad (K0688)

  KIPP

  · Toggle clamp accessories
  
  · Case-hardened screw pin and thrust pad

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Thrust screws with thrust pad (K0689)

  KIPP

  · Toggle clamp accessories
  
  · Case-hardened screw pin and thrust pad

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball-end thrust screws without head short version (K1913)

  KIPP

  · Serve as supports, stops and thrust pads
  
  · Application sectors: machine and fixture construction
  
  · Ball hardened

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.91 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub Screw _SGB

  NABEYA BI-TECH

  A set screw that can be used for tightening, positioning, stopping workpieces, etc., and the plastic pad will not damage the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.93 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Grub Screw _SGT

  NABEYA BI-TECH

  For workpiece clamping use lever / knob etc. assembly.
  
  [Features]
  · Use with lever / knob etc. assembly for workpiece clamping.
  · Can be used for positioning / stopper etc.
  · For use with [STP] [STP-A] [STP-K] as set.
  · Produced for grub screw and lever / knob combination use.
  · For details refer to lever / knob thread combination service.
  · S45CTempered tip (Hardness 50 to 60HRC), tri-iron tetroxide coating (black)

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thrust Pad _STP

  NABEYA BI-TECH

  [Features]
  · Use grub screw SGT as set
  · Effective when workpiece surface is tilted etc.
  · STPis up to 5°, STP-A and STP-K are up to 12°.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.28 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Thrust Pad TP-1

  KONISHI MFG

  For use with grub screw and set. Clamp tip surface area can be enlarged to enable stable, secure clamping.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.84 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Grub Screw GS

  KONISHI MFG

  For use with thrust pad and set. Grub screw thread diameter and length can be selected by preferred size.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Thrust Pad TP-2

  KONISHI MFG

  For use with grub screw and set. Clamp tip surface area can be enlarged to enable stable, secure clamping.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...