Workpiece clamps (horizontal clamping direction)

101

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less

?* Information on days to ship and prices

Guide Plungers / With Hexagon Socket

MISUMI

[Features] The spring force clamps the workpiece from the side.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	50.13 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Lateral Spring Plungers, with spring steel sheet

HALDER

To be used for positioning and applying pressure.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.47 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Nose Attachments for Guide Plungers / V-Shaped

MISUMI

[Features] It is attached to the tip of the spring side tensioner.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Cam Bushing Clamp (QLCP)

IMAO CORPORATION

With lever operation shaft protrudes and clamp engages. Unclamp is by spring with shaft returning.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	102.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Snap Clamp (Straight Type) (QLSNS)

IMAO CORPORATION

Side press type spring clamp. Stable clamp force when clamping and secure sound is heard.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	94.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Sub-Part Clamp

HALDER

The sub-part clamp and the sub-part stop enable workpieces to be clamped on the front face. This allows the full area of the machine table to be used to clamp the workpiece.
- down-hold effect through an angled jaw face
- clamping of large workpieces on the whole of the machine table
- large clamping forces of up to 20 kN
- solid version made of vibration-eliminating ductile iron
- optimal adaption to the workpiece and material through the use of clamping inserts and interchangeable jaws
- force closure is possible with a fixed slot tenon EH 23110. in a T-slot
- minimum interference of clamping areas - even for large workpieces
- location holes at the sides for fastening of longitudinal stops if required

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	335.24 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Toe clamps compact (K0036)

KIPP

· Mountable directly on machine tables

· With positive down force

· Gentle material clamping

· Series clamping

· For clamping rough and finished parts

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	77.84 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taper Clamping Units

HALDER

Inserting the socket head screw moves the two clamping chucks outwards and presses the workpieces against a stop. Using the double taper, an additional vertical clamping force will be achieved. Stroke of taper clamping units with M 5 = ±0,5, M 8 = ±0,5, M 12 = ±1 and M 16 = ±1,5. Can be mounted in a threaded hole or with T-nuts for horizontal or vertical multiple clamping.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	44.20 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

T-slot clamps (Supplied in pairs) (K1230)

KIPP

· Workpiece clamping with positive down force

· Ideal for flat workpieces

· Body hardened

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	107.65 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Compensating clamp steel (02380)

NORELEM

· Support for milling, drilling, planing and grinding

· Prevents vibrations and bending

· Support element without reaching under the workpiece

Select to compare

Configure now
Starting from^∗ ：	266.44 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Thin-Type Cam Side Clamp (QLSCL)

IMAO CORPORATION

With lever operation clamper protrudes and clamp engages. Unclamping is by spring and so clamp returns.

[Features]
· With workpiece float prevention mechanism.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	94.18 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Push Plungers, with pin, protected against rotating

HALDER

The push plunger is suitable for easy and safe positioning of workpieces or components prior to clamping or assembly.
Locating pins of your own profile or design can be attached to our threaded pin types.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	27.31 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Double Edge Clamps

HALDER

Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	28.77 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Toe clamps for T-slots (K0029)

KIPP

· Mountable directly on machine tables

· With positive down force

· Locking washer adapts to the angle of the workpiece

· Gentle material clamping

· For clamping rough and finished parts

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	76.22 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flat clamp with cam, with tension lever, form C, carbon steel (04472)

NORELEM

· Compact and flat design

· Quick and easy clamping of components

· Robust construction

Select to compare

Configure now
Starting from^∗ ：	150.94 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Reach Clamp (QLRC)

IMAO CORPORATION

With lever operation shaft protrudes and clamp engages. Shaft protrusion is free. With internal screw, regular clamping force can be obtained. This series CAD data is being revised. These revisions will be completed soon.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	171.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Cam Side Clamp (QLSCH)

IMAO CORPORATION

2 types available: constant light-load clamping force type, and adjustable force standard type

[Features]
· Heavy load type has internal screw for constant clamp force.
· Standard type has lever to adjust clamping force for load.
· Mouth ring head is polished finish, so can be clamped on workpiece finished surface.
· When clamping mouth ring exerts downward force preventing workpiece float.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	188.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Double Edge Clamps, machinable chucks

HALDER

Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop.
The chucks can be machined to the needed workpiece contour. The locking plate is needed only for this machining, not for the workpiece clamping.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	62.58 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Dual Clamp KCP-22ST

KAKUTA

A lateral push clamp for machining.

[Features] Dual clamps can secure with the same degree of force each time, with one touch. Enhances work efficiency and contributes to work standardization.
[Applications] Positioning when machining, etc.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	241.02 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Cam clamps with riser (K0028)

KIPP

· Mountable directly on machine tables

· With positive down force

· Gentle material clamping

· Ground contact face

· For clamping rough and finished parts

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	115.56 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flat clamps with cam, Form C, without locating pin, with tension lever (K1696)

KIPP

· Compact and flat design

· Quick and easy clamping of components

· Robust construction

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	122.12 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

5-axis clamping pin UNILOCK system (42219)

NORELEM

· For clamping and positioning workpieces and fixtures

· Contact faces ground

· Hardened

Select to compare

Configure now
Starting from^∗ ：	51.42 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Centric-vice for zero-point clamping system, mild steel (41101)

NORELEM

· Mechanical actuation

· Suitable for automation: support for handling systems

· Flexible fastening methods

· Compatible with zero-point clamping systems

Select to compare

Configure now
Starting from^∗ ：	1,102.62 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

ARNES Clamp (ARN)

IMAO CORPORATION

With lever operation sleeve part protrudes and clamp engages.

[Features]
· Compact, lightweight for easy attachment and detachment, with 1 piece many type of tool can be interchanged.
· With 12 mm feed range a wide range of applications, with simple jig and tool possible.
· As tightening range is 1.5 mm, machining items with a tolerance up to 1 mm can be safely clamped.
· Maximum tightening power is approximately 4,905N (Max. lever load 530N)

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	231.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Locating Clamps

HALDER

Suitable for a simultaneous "positioning" and "clamping" of workpieces. The locating element is a precision element which can be assembled from either side. The clamping and locating part adapted to the workpiece is screwed to the cylindrical support. Clamping and locating parts are manufactured by the user according to the individual requirements.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	446.14 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stabilizing Clamping Jaws

HALDER

Due to the big clamping jaw, this clamping element is suitable for lateral clamping of high workpieces.
The clamping force acts forwards and downwards. Clamping plate is turnable, i.e. to the ground or ribbed side.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	331.07 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Dual Clamp KCP-40ST

KAKUTA

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	275.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Clamping Vices / moveable jaw

HALDER

The clamping vice is a solid, compact clamping module with a horizontally acting clamping force and a robust mechanical spindle.
- clamping force up to max. 80 kN
- clamping stroke 25 mm via screw drive WS 36
- fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing 100 x 100 mm
- suitable clamping jaws 23231.0020 - .0033 are available

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,277.99 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Standard Jaws, for vices

HALDER

[Specifications]
・Type: Side Push
・Material: Steel, Tool Steel
・Plunger: Heat-treated steel, induction hardened

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	106.76 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Interchangeable Jaws, for vices, with pull-down effect

HALDER

The interchangeable jaws - held by 2 permanent magnets - can be inserted and exchanged with a manual handle.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	246.26 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Coverings, for taper clamping units

HALDER

Protects against damage from scales of wood and dirt.

Select to compare

Configure now
Starting from^∗ ：	23.37 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Cam clamps adjustable with riser (K0031)

KIPP

· Mountable directly on machine tables

· With positive down force

· Ground contact face

· For clamping rough and finished parts

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	95.62 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flat clamp steel for T-slot (K1540)

KIPP

· Positive down force

· Low height

· Quick clamping

· High clamping forces

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	397.16 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Riser bars (K0018)

KIPP

· For raising hook clamp holders K0017 and hook clamps

· Various mounting heights

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.82 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Riser stops (K0032)

KIPP

· Mountable directly on machine tables

· Gentle material clamping

· Ground contact face

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	82.48 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

T-slot clamp with cam, Form A, with locating pin (K1696)

KIPP

· Compact and flat design

· Quick and easy clamping of components

· Robust construction

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	76.57 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

T-slot clamp with cam, Form B, without locating pin (K1696)

KIPP

· Compact and flat design

· Quick and easy clamping of components

· Robust construction

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	93.45 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Anti-Turn Locking Devices for Taper Clamping Units, for clamping bars

HALDER

Both versions prevent turning of the taper clamping unit on the clamping bar. The version "picture 2" additionally protects against damage from scales of wood and dirt.

Select to compare

Configure now
Starting from^∗ ：	52.36 €
Min. Shipping Days ：	1 Day

*Unit price with basic configuration

Stop Plates for Taper Clamping Units, for clamping bars

HALDER

The stop plate is used when clamping only on one side of the taper clamping unit. One side of the taper clamping unit rests against the step of the stop plate and is thus fixed.

Select to compare

Configure now
Starting from^∗ ：	154.40 €
Min. Shipping Days ：	1 Day

*Unit price with basic configuration

Stops

HALDER

With the stop a flexible stop for a workpiece can be realised.

Together with a grub screw (e.g. EH 22540.), a workpiece can be mounted and aligned.

The grub screw should be secured in position with a hexagon nut.

Suitable for clamping devices M 20 - M 24.

Select to compare

Configure now
Starting from^∗ ：	225.38 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Riser bars (04378)

NORELEM

· For raising hook clamp holders K0017 and hook clamps

· Various mounting heights

Select to compare

Configure now
Starting from^∗ ：	20.19 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flat clamp steel for T-slot (04571)

NORELEM

· Positive down force

· Low height

· Quick clamping

· High clamping forces

Select to compare

Configure now
Starting from^∗ ：	491.28 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

T-slot clamp with cam, Form B, without locating pin (04472)

NORELEM

· Compact and flat design

· Quick and easy clamping of components

· Robust construction

Select to compare

Configure now
Starting from^∗ ：	115.51 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

T-slot clamp with cam, Form A, with locating pin (04472)

NORELEM

· Compact and flat design

· Quick and easy clamping of components

· Robust construction

Select to compare

Configure now
Starting from^∗ ：	94.61 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toe clamps compact (04521)

NORELEM

· Mountable directly on machine tables

· With positive down force

· Gentle material clamping

· Series clamping

· For clamping rough and finished parts

Select to compare

Configure now
Starting from^∗ ：	93.41 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Max. Clamping Force(N)
Material
Type
Type
Applicable Tightening Force(N)
Stroke S(mm)
Attaching Portion Shape
Arm Height Type
Arm Height H(mm)
Arm Length Type
Arm Length L(mm)
Tip Bolt Type

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	HALDER	MISUMI	IMAO CORPORATION	IMAO CORPORATION	HALDER	KIPP	HALDER	KIPP	NORELEM	IMAO CORPORATION	HALDER	HALDER	KIPP	NORELEM	IMAO CORPORATION	IMAO CORPORATION	HALDER	KAKUTA	KIPP	KIPP	NORELEM	NORELEM	IMAO CORPORATION	HALDER	HALDER	KAKUTA	HALDER	HALDER	HALDER	HALDER	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	HALDER	HALDER	HALDER	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM
Product Series	Guide Plungers / With Hexagon Socket	Lateral Spring Plungers, with spring steel sheet	Nose Attachments for Guide Plungers / V-Shaped	Cam Bushing Clamp (QLCP)	Snap Clamp (Straight Type) (QLSNS)	Sub-Part Clamp	Toe clamps compact (K0036)	Taper Clamping Units	T-slot clamps (Supplied in pairs) (K1230)	Compensating clamp steel (02380)	Thin-Type Cam Side Clamp (QLSCL)	Push Plungers, with pin, protected against rotating	Double Edge Clamps	Toe clamps for T-slots (K0029)	Flat clamp with cam, with tension lever, form C, carbon steel (04472)	Reach Clamp (QLRC)	Cam Side Clamp (QLSCH)	Double Edge Clamps, machinable chucks	Dual Clamp KCP-22ST	Cam clamps with riser (K0028)	Flat clamps with cam, Form C, without locating pin, with tension lever (K1696)	5-axis clamping pin UNILOCK system (42219)	Centric-vice for zero-point clamping system, mild steel (41101)	ARNES Clamp (ARN)	Locating Clamps	Stabilizing Clamping Jaws	Dual Clamp KCP-40ST	Clamping Vices / moveable jaw	Standard Jaws, for vices	Interchangeable Jaws, for vices, with pull-down effect	Coverings, for taper clamping units	Cam clamps adjustable with riser (K0031)	Flat clamp steel for T-slot (K1540)	Riser bars (K0018)	Riser stops (K0032)	T-slot clamp with cam, Form A, with locating pin (K1696)	T-slot clamp with cam, Form B, without locating pin (K1696)	Anti-Turn Locking Devices for Taper Clamping Units, for clamping bars	Stop Plates for Taper Clamping Units, for clamping bars	Stops	Riser bars (04378)	Flat clamp steel for T-slot (04571)	T-slot clamp with cam, Form B, without locating pin (04472)	T-slot clamp with cam, Form A, with locating pin (04472)	Toe clamps compact (04521)
CAD	2D / 3D	3D	2D / 3D	3D	3D	3D	2D / 3D	3D	2D / 3D		3D	3D	3D	2D / 3D		3D	3D	3D	2D / 3D	2D / 3D	2D / 3D			3D	3D	3D	2D / 3D	3D	3D	3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	50.13 € *Unit price with basic configuration Volume Discount	16.47 € *Unit price with basic configuration	16.38 € *Unit price with basic configuration Volume Discount	102.65 € *Unit price with basic configuration	94.81 € *Unit price with basic configuration	335.24 € *Unit price with basic configuration	77.84 € *Unit price with basic configuration	44.20 € *Unit price with basic configuration	107.65 € *Unit price with basic configuration	266.44 € *Unit price with basic configuration	94.18 € *Unit price with basic configuration Volume Discount	27.31 € *Unit price with basic configuration	28.77 € *Unit price with basic configuration	76.22 € *Unit price with basic configuration	150.94 € *Unit price with basic configuration	171.98 € *Unit price with basic configuration	188.27 € *Unit price with basic configuration	62.58 € *Unit price with basic configuration	241.02 € *Unit price with basic configuration	115.56 € *Unit price with basic configuration	122.12 € *Unit price with basic configuration	51.42 € *Unit price with basic configuration	1,102.62 € *Unit price with basic configuration	231.92 € *Unit price with basic configuration	446.14 € *Unit price with basic configuration	331.07 € *Unit price with basic configuration	275.44 € *Unit price with basic configuration	1,277.99 € *Unit price with basic configuration	106.76 € *Unit price with basic configuration	246.26 € *Unit price with basic configuration	23.37 € *Unit price with basic configuration	95.62 € *Unit price with basic configuration	397.16 € *Unit price with basic configuration	16.82 € *Unit price with basic configuration	82.48 € *Unit price with basic configuration	76.57 € *Unit price with basic configuration	93.45 € *Unit price with basic configuration	52.36 € *Unit price with basic configuration	154.40 € *Unit price with basic configuration	225.38 € *Unit price with basic configuration	20.19 € *Unit price with basic configuration	491.28 € *Unit price with basic configuration	115.51 € *Unit price with basic configuration	94.61 € *Unit price with basic configuration	93.41 € *Unit price with basic configuration
Min. Shipping Days	Same day	Same day	5 Days	6 Days	6 Days	3 Days	4 Days	Same day	4 Days	4 Days	6 Days	Same day	3 Days	4 Days	4 Days	6 Days	6 Days	3 Days	7 Days	4 Days	4 Days	4 Days	4 Days	6 Days	4 Days	4 Days	6 Days	3 Days	3 Days	3 Days	2 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	1 Day	1 Day	3 Days	4 Days	4 Days	4 Days	4 Days	4 Days
Specifications	Order quantities extended (D-JIT)
Max. Clamping Force(N)	Up to 100	-	-	100 to 1000 / 1000 to 3000	Up to 100 / 100 to 1000	-	-	-	-	-	3000 or More	-	-	-	-	100 to 1000 / 1000 to 3000	100 to 1000 / 1000 to 3000	-	1000 to 3000	-	-	-	-	-	-	-	1000 to 3000	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Material	Steel	Steel	MC Nylon	Steel	Zinc Alloy	Steel	-	Steel	-	-	Steel	Steel	Aluminum Alloy	-	-	Steel	Steel	Aluminum Alloy	Stainless Steel	-	-	-	-	-	Steel	Steel	Stainless Steel	Steel	Steel	Steel	-	-	-	-	-	-	-	Steel	Steel	Steel	-	-	-	-	-
Type	Main Body	-	Optional Components	Main Body	Main Body	-	-	-	-	-	Main Body	-	-	-	-	Main Body	Main Body	-	Main Body	-	-	-	-	Main Body	-	-	Main Body	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Type	-	Side Push	-	-	-	Side Push	-	Side Push	-	-	-	Side Push	Side Push	-	-	-	-	Side Push	Horizontal	-	-	-	-	-	Side Push	Side Push	Horizontal	Side Push	Side Push	Side Push	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Applicable Tightening Force(N)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	200 ～ 1400	-	-	3000	-	-	-	-	-	-	-	3000	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Stroke S(mm)	-	1.5	-	-	-	-	-	-	-	-	-	6 ～ 10	-	-	-	1.5 ～ 2.3	-	-	22	-	-	-	-	-	-	-	40	-	-	-	-	-	-	-	-	-	-	-	-	65	-	-	-	-	-
Attaching Portion Shape	-	Flange Base	-	-	-	-	-	Straight Base	-	-	-	Straight Base	Straight Base	-	-	-	-	Straight Base	Straight Base	-	-	-	-	-	Straight Base	Straight Base	Straight Base	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Arm Height Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Standard	-	-	-	-	-	Standard	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Arm Height H(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	55	-	-	-	-	-	-	-	77	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Arm Length Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Standard	-	-	-	-	-	Standard	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Arm Length L(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	53	-	-	-	-	-	-	-	68	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Bolt Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Not Provided	-	-	-	-	-	-	-	Not Provided	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-