V Belt Pulleys, Idlers

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Promotional pricing

Standard V-Pulley

NABEYA BI-TECH

"Shaft hole, keyway and push screw machining standardized."
[Features]
· Japan's first standard inch size product.
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Imbalance mass allowance on outer circumference is 0.2% of pulley mass or 3 g, whichever is larger.
· Same accuracy as the balance prescribed in JIS B 1854-1987, "General use V-pulley".* M-type pulleys are exempt.
[Applications]
· Fans, etc.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	11.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

ISOMEC SP Pulley

NABEYA BI-TECH

V pulley to international standards. Either general purpose V-belt, or narrow width V-belt can be used.

[Features]
· Consistent production from casting to machining and surface treatment.
· The cell production method allows the production of many kinds of products in low volume, with short lead times.
· Can be attached and removed from shaft / positioned with hex or socket wrench. In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission is achieved.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	42.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

ISOMEC Polydrive Pulley

NABEYA BI-TECH

V-belt pulley with high power transmission and large rotation ratio.
[Features]
· High transmission efficiency. ISO 9982 compliant.
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Makes it possible to design a high-transmission efficiency system with a small pulley diameter, short shaft distance and narrow pulley width.
・ Can be attached and removed from shaft and positioned with hex or socket wrench.
· In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission can be achieved.
· Set the imbalance tolerance on the outer circumference to 1 g or 0.1% of the total mass of the pulley and bushing, whichever is larger.
· Balancing is adjusted using a balancing machine.
[Applications]
· Automobiles, manufacturing machinery, air-conditioning equipment, electric tools, household appliances, etc.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	75.99 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Promotional pricing

V Idler_VMC

NABEYA BI-TECH

NBK idler has a special seal applied to bearings. No scattering of grease by centrifugal force, or suction of dust. The effective weight of the grease is great, improving durability of the idler.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	33.05 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Pulleys for Tapered Clamping Bush - Profile SPZ

CONCAR

[Specifications]
・Number of grooves: 1-6
・Material: Cast iron
・Face width: 16-76mm
・Effective diameter Dw(mm): 50-630
・Standard: DIN 2211

Select to compare

Configure now
Starting from^∗ ：	11.38 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Guide Idler_VGR / VGA

NABEYA BI-TECH

Idler for use for a variety of guides.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	54.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

JIS V-Pulley, B Type

NABEYA BI-TECH

Full lineup of V-belt pulleys that conform to JIS B 1854.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway and push screw machining standardized.
· Extensive product range. 650 size. A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
[Applications]
· Fans, etc.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	27.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Belt Tension Pulleys RSRA..-L0, for V-Belts to DIN 2215 / ISO / R 434, ISO / R 608 and DIN 7753 / ISO / R 460,000

INA

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	23.30 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Vankin V Idler_VMP

NABEYA BI-TECH

[Features]
· Can can be used as an idler for light load wires.
· Material / Finish: SPCC, trivalent chromate treatment

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	36.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

JIS V-Pulley, C Type

NABEYA BI-TECH

Top-quality pulley, with materials, machining precision and balance accuracy exceeding JIS standards.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway and push screw machining standardized.
· A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately.
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Imbalance tolerance on outer circumference is 0.1% of pulley mass.
· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
[Applications]
· Fans, etc.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	54.37 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

ISOMEC Bushing

NABEYA BI-TECH

Safe and reliable fastening system. Responding to a design change is easy.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	21.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Engineering Plastic / V-Idler VME

NABEYA BI-TECH

● Material/finish
· Main body: glass fiber reinforced nylon 66
· Bearing: steel, rubber seal

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.69 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

V-belt pulley for taper bush (22070)

NORELEM

· Flexible taper clamping bush system

· Can be mounted with or without a parallel key.

· Simple assembly and dismantling

· Quiet running and good vibration absorbing properties

Select to compare

Configure now
Starting from^∗ ：	5.91 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Variable Speed Pulley

NABEYA BI-TECH

Fine rotation ratio adjustment. Simple structure, precision machining. No rattling due to micro vibrations / shock loads.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	74.34 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

JIS V-Pulley, D Type

NABEYA BI-TECH

Full lineup of V-belt pulleys that conform to JIS B 1854.
[Features]
· Consistent production from casting to machining and surface treatment.
· Shaft hole, keyway and push screw machining standardized.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
· Imbalance tolerance on outer circumference is 0.1% of pulley mass.
· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
[Applications]
· Fans, etc.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	712.96 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Engineering Plastic V-Pulley Idler (VIP)

IMAO CORPORATION

[Features]
· Adaptive V-belt M type, A type, B type resin pulley idler.
· Integrated ball bearing

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	15.67 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

JIS V-Pulley A Series

NABEYA BI-TECH

Highest quality pulley, with materials together with machining and balance accuracy exceeding JIS standards.

[Features]
· Consistent production from casting to machining and surface treatment.
· The cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway, and set screw machining standardized.
· Easy set-up
· A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JISB1854-1987 "General use V-pulley")
· Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.
· Surface treatment, for improving corrosion resistance is a electrodeposition coating with beautiful finish.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.92 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

SNS JIS V Pulley A

KANEMITSU

Nominal diameter ø67 to 710, with 1 to 3 runners available in wide selection, good balance measurements, and directly usable on high speed rotator.

[Features]
· SNS JIS V pulley is a new addition to the mechanical series, with 360 types standardized, rotation ratio, distance between shafts etc. can be freely selected.
· Ingenuity has been applied to the shape design etc. to prevent damage to the shaft or bearing.
· Shaft etc. can be preserved, useful for saving labor.
· Can also be used for machines with heavy loads and shocks etc.
· High-precision machining, for good transmission efficiency, and regular rotation ration is achieved.
· As the SNS and JIS V-pulleys, on all balancing machine products, machine using aligned balance measurements, they have good quality high-precision and are directly usable on high-speed rotators.

Select to compare

Configure now
Starting from^∗ ：	15.97 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

VMG Groove Gauge for V-Pulley

NABEYA BI-TECH

Gauge for checking wear of pulley V-groove part. Orders can be made for individual shapes, or as a set for each groove shape. A gap has been provided between the gauge and the outer circumference of the pulley and the bottom of the V-groove. Early replacement is recommended for transmission efficiency.

Select to compare

Configure now
Starting from^∗ ：	82.01 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Pulleys for Tapered Clamping Bush - Profile SPB

CONCAR

[Specifications]
・Material: Cast iron
・Standard: DIN 2211

V-belt or hub pulleys are essential machine elements needed for V-belt drives. Here, two shafts are connected to each other via a V-belt or banded belt using a V-belt. Often, this type of pulley is also known as a V-pulley or grooved pulley. The material is usually grey cast iron, often known as GG-20 or EN-GJL 200.
Pulleys for Tapered Clamping Bush - Profile SPB

Select to compare

Configure now
Starting from^∗ ：	23.63 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 12 x PJ

CONCAR

[Specifications]
・Material: Cast iron
・Overall width(mm): 32
・Number of grooves: 12
・Standard: DIN 7871

Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 12 x PJ

Select to compare

Configure now
Starting from^∗ ：	67.69 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

V Belt Pulleys, Idlers

OPTIBELT

[Specifications]
・Number of grooves: 4
・Inner dimension(mm): 35-146
・Outer dimension(mm): 64-639.6
・Width(mm): 21-102
・Version: Arm pulley, Full pulley, Plate pulley

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Wedge Pulley

NABEYA BI-TECH

High-speed, high power transmission V-belt pulley that conforms with JIS B 1855.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.
· Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.
· 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").
· Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass.
[Applications]
· Fans, etc.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.74 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

STB Sheave 3V

KANEMITSU

Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200

Select to compare

Configure now
Starting from^∗ ：	34.34 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

STB Sheave 5V

KANEMITSU

Select to compare

Configure now
Starting from^∗ ：	484.41 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 8 x PJ

CONCAR

[Specifications]
・Material: Cast iron
・Overall width(mm): 23
・Number of grooves: 8
・Standard: DIN 7867

Ribbed-V pulleys are available in a range of designs and profiles, as full or floor pulleys.

Select to compare

Configure now
Starting from^∗ ：	85.45 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Continuously Variable Transmission (Hagino Type)_W / L

NABEYA BI-TECH

[Features]
· Rotation has continuously variable speed.
· In the hagino type CVT, by placing a speed change pulley on the intermediate shaft and changing the position thereof, the rotational speed of the pulley on the driven side is changed utilizing the tension balance of the belt, allowing continuously variable transmission.
· Alignment is automatically adjusted.
· Both side disks and middle disks move freely on the shaft.
· Alignment with the driving side pulley and the driven side pulley is automatically adjusted.
· For this reason, the center of the belt is always held, and the belt is not strained.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	219.70 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Promotional pricing

Vankin Pulley VK

NABEYA BI-TECH

Lightweight V-belt pulley made of sheet metal.
[Features]
· Rotation molding method imparts a rigidity suitable for light/moderate load transmission in general industrial machinery.
· Pulley grooves are rounded with no sharp corners to avoid damage to the belt.
· Lightweight, so the entire machine, including base, pillow block, etc., can be made lighter and more compact.
[Applications]
· Fans, etc.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

ISOMEC Bushing / Bolt-on Hub

NABEYA BI-TECH

ISOMEC bushing can be used simply by connecting a bolt to the rotating body.

Select to compare

Configure now
Starting from^∗ ：	68.69 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Promotional pricing

NS Standard V-Pulley A

KANEMITSU

Nominal diameter 2 to 24 inches, with 1 to 4 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotator.

[Features]
· A wide range of model configurations: 95 A type, 132 B types and 102 C types, with pitches ranging from 2° to 30° and 1 to 6 grooves.
· High-performance, high-quality NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
· Dimensional precision to JIS reference standards, with thorough quality control.
· Groove part shape and dimensions table.
· Maximum speed: NS standard V-pulley is recommended to be of circumferential speed under 25 m/s specification.
· Recommended minimum pulley diameter: A type 3° or greater, B type 5° or greater, and C type 8° or greater.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

NS Standard V-Pulley B

KANEMITSU

Nominal diameter 2 to 30 inches, with 1 to 5 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotation.

[Features]
· Extensive range of applications, with high level of model configuration, and safety for quality to satisfy user needs.
· The NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
· Dimensional precision to JIS reference standards, with thorough quality control.

Select to compare

Configure now
Starting from^∗ ：	6.19 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SNS Power Sheave 3V

KANEMITSU

JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø67 to 630, groove no. 1 to 6. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (greater transmission capacity FC250)

Select to compare

Configure now
Starting from^∗ ：	21.68 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Pulleys for Tapered Clamping Bush - Profile SPA

CONCAR

Select to compare

Configure now
Starting from^∗ ：	12.08 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Pulleys for Tapered Clamping Bush - Profile SPC

CONCAR

Select to compare

Configure now
Starting from^∗ ：	135.60 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

ISOMEC Bushing / Adapter

NABEYA BI-TECH

ISOMEC bushing can be used simply by machining a straight hole into the rotating body.

Select to compare

Configure now
Starting from^∗ ：	50.31 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

NS Standard V-Pulley C

KANEMITSU

Nominal diameter 4 to 30 inches, with 2 to 6 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable on high-speed rotator.

Select to compare

Configure now
Starting from^∗ ：	369.12 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

SNS JIS V Pulley B

KANEMITSU

Nominal diameter ø118 to 900, with 1 to 5 runners available in wide selection, good balance measurements, and directly usable on high-speed rotator.

Select to compare

Configure now
Starting from^∗ ：	40.18 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SNS Power Sheave 5V

KANEMITSU

JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø150 to 1000, groove no. 2 to 10. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (large transmission capacity FC250)

[Features]
· JIS standard sizes in addition to a wide range of intermediate sizing standardized, with free selection of rotation ratio and shaft distance etc., for easy design.
· JIS B 1855 slim V-pulley dimensions adopted for interchangeability.
· Material exceeding FC200 (large transmission capacity FC250) used, with various dimensions displaying 100% performance for high precision, vibration, and balance.
· Compared with previous products (A.B.C.....shape), narrow width V belt (3W, 5V, 8V types), there are many advantages due to the very large transmission capacity of the belt, with high horsepower greatly reducing costs.
· Due to the compactness of the pulley, it can be used for low speed horsepower not possible due to large sizes with conventional products, and it is now possible to change the chain and gear transmission.
· Power sheave has enough strength to withstand.
· Since release, it has been used by many, so can be adopted with confidence.
· Band-power ACE, and power scrum are interchangeable even when used with groove guide wheels, and max wedge belt.

Select to compare

Configure now
Starting from^∗ ：	107.58 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 12 x PL

CONCAR

[Specifications]
・Material: Cast iron
・Overall width(mm): 62
・Number of grooves: 12
・Standard: DIN 7936

Ribbed-V pulleys are available in a range of designs and profiles, as full or floor pulleys.

Select to compare

Configure now
Starting from^∗ ：	209.05 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 16 x PJ

CONCAR

[Specifications]
・Material: Cast iron
・Overall width(mm): 41
・Number of grooves: 16
・Standard: DIN 7876

Ribbed-V pulleys are available in a range of designs and profiles, as full or floor pulleys.

Select to compare

Configure now
Starting from^∗ ：	90.89 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 16 x PL

CONCAR

[Specifications]
・Material: Cast iron
・Overall width(mm): 80
・Number of grooves: 16
・Standard: DIN 7949

Ribbed-V pulleys are available in a range of designs and profiles, as full or floor pulleys.

Select to compare

Configure now
Starting from^∗ ：	568.98 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 8 x PL

CONCAR

[Specifications]
・Material: Cast iron
・Overall width(mm): 42
・Number of grooves: 8
・Standard: DIN 7932

Ribbed-V pulleys are available in a range of designs and profiles, as full or floor pulleys.

Select to compare

Configure now
Starting from^∗ ：	105.43 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days

	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	CONCAR	NABEYA BI-TECH	NABEYA BI-TECH	INA	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NORELEM	NABEYA BI-TECH	NABEYA BI-TECH	IMAO CORPORATION	NABEYA BI-TECH	KANEMITSU	NABEYA BI-TECH	CONCAR	CONCAR	OPTIBELT	NABEYA BI-TECH	KANEMITSU	KANEMITSU	CONCAR	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	KANEMITSU	KANEMITSU	KANEMITSU	CONCAR	CONCAR	NABEYA BI-TECH	KANEMITSU	KANEMITSU	KANEMITSU	CONCAR	CONCAR	CONCAR	CONCAR
Product Series	Standard V-Pulley	ISOMEC SP Pulley	ISOMEC Polydrive Pulley	V Idler_VMC	Pulleys for Tapered Clamping Bush - Profile SPZ	Guide Idler_VGR / VGA	JIS V-Pulley, B Type	Belt Tension Pulleys RSRA..-L0, for V-Belts to DIN 2215 / ISO / R 434, ISO / R 608 and DIN 7753 / ISO / R 460,000	Vankin V Idler_VMP	JIS V-Pulley, C Type	ISOMEC Bushing	Engineering Plastic / V-Idler VME	V-belt pulley for taper bush (22070)	Variable Speed Pulley	JIS V-Pulley, D Type	Engineering Plastic V-Pulley Idler (VIP)	JIS V-Pulley A Series	SNS JIS V Pulley A	VMG Groove Gauge for V-Pulley	Pulleys for Tapered Clamping Bush - Profile SPB	Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 12 x PJ	V Belt Pulleys, Idlers	Wedge Pulley	STB Sheave 3V	STB Sheave 5V	Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 8 x PJ	Continuously Variable Transmission (Hagino Type)_W / L	Vankin Pulley VK	ISOMEC Bushing / Bolt-on Hub	NS Standard V-Pulley A	NS Standard V-Pulley B	SNS Power Sheave 3V	Pulleys for Tapered Clamping Bush - Profile SPA	Pulleys for Tapered Clamping Bush - Profile SPC	ISOMEC Bushing / Adapter	NS Standard V-Pulley C	SNS JIS V Pulley B	SNS Power Sheave 5V	Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 12 x PL	Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 16 x PJ	Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 16 x PL	Ribbed Belt Pulleys for Tapered Clamping Bush - Profile 8 x PL
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	3D	2D / 3D	2D / 3D	2D / 3D			2D / 3D	2D / 3D	2D / 3D	2D / 3D						2D / 3D				2D / 3D	2D / 3D
Starting from^∗	11.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	42.00 € *Unit price with basic configuration Volume Discount	75.99 € *Unit price with basic configuration	33.05 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	11.38 € *Unit price with basic configuration	54.23 € *Unit price with basic configuration	27.17 € *Unit price with basic configuration Volume Discount	23.30 € *Unit price with basic configuration Volume Discount	36.04 € *Unit price with basic configuration Volume Discount	54.37 € *Unit price with basic configuration	21.99 € *Unit price with basic configuration Volume Discount	9.69 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.91 € *Unit price with basic configuration	74.34 € *Unit price with basic configuration	712.96 € *Unit price with basic configuration	15.67 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.92 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	15.97 € Special price *Unit price with basic configuration Promotional pricing	82.01 € *Unit price with basic configuration	23.63 € *Unit price with basic configuration	67.69 € *Unit price with basic configuration	-	16.74 € *Unit price with basic configuration	34.34 € *Unit price with basic configuration	484.41 € *Unit price with basic configuration	85.45 € *Unit price with basic configuration	219.70 € *Unit price with basic configuration	14.61 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	68.69 € *Unit price with basic configuration	9.94 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.19 € Special price *Unit price with basic configuration Promotional pricing	21.68 € *Unit price with basic configuration	12.08 € *Unit price with basic configuration	135.60 € *Unit price with basic configuration	50.31 € *Unit price with basic configuration	369.12 € *Unit price with basic configuration	40.18 € *Unit price with basic configuration	107.58 € *Unit price with basic configuration	209.05 € *Unit price with basic configuration	90.89 € *Unit price with basic configuration	568.98 € *Unit price with basic configuration	105.43 € *Unit price with basic configuration
Min. Shipping Days	Same day	6 Days	9 Days	Same day	3 Days	6 Days	6 Days	4 Days	6 Days	8 Days	6 Days	Same day	4 Days	9 Days	8 Days	Same day	Same day	Same day	9 Days	3 Days	3 Days	4 Days	8 Days	7 Days	8 Days	3 Days	9 Days	Same day	9 Days	Same day	Same day	8 Days	3 Days	3 Days	9 Days	9 Days	5 Days	8 Days	17 Days	3 Days	3 Days	3 Days